Northern California Design-2-Part Show
June 8 & 9, 2016
Santa Clara Convention Center • Santa Clara, CA



Search by Category

or

Search by Keywords


  Reset Search  



0 Exhibitors to Meet

Exhibitor List


Listed below are the current exhibitors and service categories of companies in the show.
This page is also an interactive tool for you to use when planning your personal visit.

[ 188 ] companies match your search.
FEATURED EXHIBITORS listed first alphabetically
A & B DIE CASTING CORP.     Booth # 322
Service Categories: Castings - Die, Aluminum • Castings - Die, Zinc • Machining - Precision CNC

We supply fully finished and machined, short and medium run die cast components to customers world-wide. We offer a full range of services to provide components ready for assembly, combined with order fulfillment options to provide the flexibility you need to meet your customers' needs.

www.abdiecasting.com

Quality Certifications: ISO 9001:2008
ACE WIRE SPRING & FORM CO. INC.     Booth # 242
Service Categories: Springs - Coil • Wire Forming & Fabricating • Wire Straightening • Engineering & Technical Services • Springs - Flat

CUSTOM "Spring & Wire Form Specialists" – Incorporating latest CNC equipment technology to manufacture compression, extension, torsion springs, complex wire forms, and spring assemblies. Consistent quality, lower costs, on-time deliveries, and Design Engineering Assistance. Prototypes to production - Family owned & operated since 1939. Let ACE be your problem solver.

www.acewirespring.com

Quality Certifications: ISO 9001:2008 • ITAR REGISTERED • MIL-SPEC 45208
ACS CO. / E-SYSTEM     Booth # 508
Service Categories: Castings - Die • Extrusions - Aluminum • Metal Finishing - Electroless Nickel • Plastics - Injection Molding • Assemblies - Electromechanical

Our full suite of management solutions enables true operational superiority for our customers through increased product margins, shorter design cycles, & decreased fixed & variable costs with reduced warranty & repair. By supplying New Product Introduction, Lean Manufacturing & Global Product Support services, E Systems’ Level 5 Technology allows our OEM customers to focus on innovation & next generation new product development.

www.esystemstechnology.com

Quality Certifications: 6 SIGMA • ISO 9001 • ISO 13485
ADRON TOOL CORP.     Booth # 134
Service Categories: EDM • EDM - Wire • EDM - Sinker • EDM - Small Hole Drilling • Machining - Production

Wire EDM specialists with over 50 CNC mach., CNC (sinker) std. EDM; largest capacity, 40"x32"x18", workpiece wt. 10,000 lbs., 27-1/2" thick; metal parts rapid prototyping svc. and prod. runs of complex, contoured shapes in tough to mach. or exotic mtl.; CNC production machining, coord. measuring sys., SPC, OGP optical non-contact measuring.

www.adron.com

Quality Certifications: ISO 9001:2008 • AS 9100 • NADCAP AS7116
AK STAMPING COMPANY     Booth # 247
Service Categories: Stampings - High Volume • Stampings - Short Run • Stampings - Progressive Die • Stampings - Metal • Stampings - Fourslide

A leader in precision stamping technology providing engineering solutions, product design, development, production, & high volume manufacturing & assemblies.

www.akstamping.com

Quality Certifications: ISO 9000:2008
ALUMA GRAPHICS     Booth # 118
Service Categories: Labels, Tapes & Decals • Screen Printing • Nameplates, Dials & Panels

Leading manufacturer of labels, decals, nameplates, domed labels and overlays. We do METALPHOTO, digitally print, screen print, pad print, laser engrave, die-cut & waterjet cut.

www.alumagraphics.com

Quality Certifications: ISO 9001:2008 • AS9100C
AMERSON PRECISION SHEET METAL     Booth # 436
Service Categories: Fabricating - Sheet Metal

We have been supplying our clients with complete sheet metal fabrication services for over 30 years. At APSM, we make sure your project is completed on time and within budget. Our services include laser cutting, punching, finishing, assembly, and fulfillment for customers in industries such as electronics, telecommunications, communications, computers, lighting, automotive, aerospace, and medical as well as assembly and integration.

www.apsm.com

Quality Certifications: ISO 9001:2008
APPLE RUBBER PRODUCTS     Booth # 252
Service Categories: Gaskets, Seals, Washers & O-rings • Rubber Molding • Rubber To Metal Bonding • Silicone / Rubber - Liquid Injection Molding • Prototypes - Rubber

Manufacturer of elastomeric parts. O-Rings; MicrOrings to MacrOrings, AS568 & ISO 3601 (search inventory from our Website). We design & manufacture custom, rubber bonded to plastic, metal & filter materials, and medical rubber parts. Our services include engineering, design assistance & QC testing & reporting, from prototype to Production. Class 7 (10,000) clean room.

www.applerubber.com

Quality Certifications: ISO 9001 • AS 9100
ASH INDUSTRIES     Booth # 144
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Plastics - Insert Injection Molding • Plastics - Hot Stamping & Screening • Prototypes - Plastic

Engineered for You. In-House MIM, Thermoplastic, and Silicone Injection & Roto Molding & Tooling as well as cast epoxy components & 7-Axis Swiss Lathe production. Molding includes custom inserts & over-molding, two shot molding. Component assembly, secondary processing & decorating, utilizing the latest in CNC, EDM & Modeling technology.

www.ashindustries.com

Quality Certifications: ISO 9001 • ISO 7 CLASS 10K CLEAN ROOM
BT LASER INC.     Booth # 424
Service Categories: Laser Cutting • Machining • Fabricating - Sheet Metal • Welding - TIG Aluminum • Welding - MIG

Provides custom design, fabrication and manufacturing services. American Performance Technologies and Rave Precision sit under the BT Laser umbrella. This allows us to provide precision laser cutting, precision machining and full fabrication support while delivering a complete customer experience. High quality products and total solutions on time is our mission.

www.btlaser.com

Quality Certifications: ISO 9001:2008
CENTURY RUBBER CO. INC.     Booth # 116
Service Categories: Rubber Molding • Rubber To Metal Bonding • Gaskets, Seals, Washers & O-rings • Rubber Stampings • Prototypes - Rubber

The company manufactures precision custom molded & die-cut elastomer products, utilizing compression, transfer & injection molding processes. We work with most elastomers including silicone, fluorosilicone, viton, neoprene, nitrile, EPDM & natural rubber. Strong emphasis on rubber to metal bonding. Made in America.

www.centuryrubber.com

Quality Certifications: ISO 9001:2008 • ITAR REGISTERED • US/Canada JCP Certified
CMS     Booth # 404
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Turnkey • Assemblies - Electronic • Prototypes - Electronic • Wire & Cable Harnesses

An ISO 9001:2008 and UL certified contract manufacturer specializing in PCB electronic assemblies (SMT, Thru-hole, Hybrid), box builds (full integration and test), cable assemblies, and wire harnesses.

www.cmstempe.com

Quality Certifications: ISO 9001:2008 • UL CERTIFIED
CUSTOM STAMPING INC.     Booth # 418
Service Categories: Stampings - Metal • Stampings - Progressive Die • EDM • Electronic Components • Prototypes - Stamping

A precision metal stamping company with more than 45 years of experience in metal stampings, production manufacturing and assembly of electronic components for the electronics, telecommunications, military, medical, and automotive industries. We also offer prototyping and complete EDM services.

www.customstamping.com

Quality Certifications: ISO 9001:2008
DB ROBERTS     Booth # 129
Service Categories: Fasteners • Electronic Hardware • Assembly Hardware • Levers, Knobs & Handles • Masking

Since our inception, we have been focused on providing solutions for fastener applications in Sheet Metal Fabrication, Metalworking, and Industrial Electronics. Our "Superior Customer Service" and "Commitment to Excellence" has proven to be a winning formula fueling innovation and rapid growth year after year.

www.dbroberts.com

Quality Certifications: ISO 9001:2008 • AS 9120A
DDH GROUP     Booth # 514
Service Categories: Wire & Cable Harnesses • Assemblies - Turnkey • Fabricating - Sheet Metal • Surface Mount Technology - Assembly • Assemblies

We consist of US & worldwide manufacturing facilities specializing in cable and wire harnesses, printed circuit board assemblies, sheet metal fabrication and complete box build manufacturing solutions. All are under the same ownership. We offer both turn-key and consignment services.

www.ddhent.com

Quality Certifications: ISO 13485:2003 • AS9100/ISO2015 • UL REGISTERED • ITAR
DIGICOM ELECTRONICS     Booth # 331
Service Categories: Assemblies - Turnkey • Assemblies - Electronic • Assemblies - Printed Circuit Boards • Surface Mount Technology - Assembly • Prototypes - Electronic

Provides electronics manufacturing solutions for small to high-volume production, prototypes, PCB assemblies and complete box-build systems. Specializes in medical devices, aerospace, industrial, RF, wireless. Manufacturing in the California Bay Area since 1982. We deliver personal service, precision technology, and stringent process control. For more information or to get a quote, please email us at info@digicom.org

www.digicom.org

Quality Certifications: ISO 9001:2008 • ISO 13485:2003 • 21 CFR 820 • MIL-SPEC 45208/ITAR CERT
DINSMORE INC.     Booth # 451
Service Categories: Rapid Prototyping • CAD Design Services • Prototypes - Machining • Prototypes - Plastic • Tooling - Rapid Injection Molding

We specialize in product design & development, 3D printing, rapid prototyping, rapid manufacturing & rapid tooling. We strive to meet our customers' needs with competitive pricing, fast turnaround times & quality workmanship with a 100% satisfaction guarantee. We serve all industries: medical/dental equipment, aerospace, automotive, electronics, consumer products & more...

www.dinsmoreinc.com

E & S PRECISION MACHINE INC.     Booth # 212
Service Categories: Machining - CNC Milling & Turning • Prototypes - Machining • Laser Engraving • Machining - Precision CNC • Machining - Conventional CNC

We provide high quality prototypes. Short & long run CNC production & welded assemblies. For more information, please contact us at: sales@esprecision.com.

www.esprecision.com

Quality Certifications: ISO 9001:2008
FOX VALLEY SPRING LLC     Booth # 114
Service Categories: Springs - Coil • Springs - Flat • Wire Forming & Fabricating • Stampings - Fourslide • Stampings - Short Run

Manufacturer of custom springs, wire forms and metal forms. We utilize SPC systems, CNC coilers and experienced craftsmen to assure consistent quality. Design assistance and rush orders are welcome. Wisconsin Grand Manufacturer of the Year. We Quality Certify each process & provide a total Value-added supplier package.

www.foxvalleyspring.com

Quality Certifications: ISO 9001:2008 • ITAR CERTIFIED
FREETECH PLASTICS INC.     Booth # 221
Service Categories: Plastics - Pressure Forming • Plastics - Thermoforming/Vacuum Forming • Plastics - Low Volume • Electronic Enclosures • Tooling

Specializing in high-detail & close tolerance formed plastic parts. We offer CNC machining, fabrication assembly & engineering services. Our capabilities include plastic pressure & vacuum forming, drape forming, twin sheet forming, design development, materials selection & technical consulting. Primary markets we serve are medical, electronics, telecommunications, automotive & aerospace.

www.freetechplastics.com

Quality Certifications: ISO 9001 • AS 9100
HARDWARE SPECIALTY CO. INC.     Booth # 202
Service Categories: Fasteners • Electronic Hardware • Adhesives • Assemblies - Electrical • Assembly Hardware

Our SAE AS9120 Registered Quality Management System and full service Quality Assurance facilities coupled with many years of technical sales experience and deep product line inventory ensure our commitment to total customer satisfaction. Together these make Hardware Specialty an unbeatable source for all your fastener and electronic component requirements.

www.hardwarespecialty.com

Quality Certifications: SAE AS9120 • ISO 9001:2008 • ISO 14001 • MIL STD 45662A
I C A CORPORATION     Booth # 117
Service Categories: Machining - Precision CNC • Electronic Enclosures • Fabricating - Sheet Metal • Assemblies - Mechanical • 3D Printing

Employee owned company providing build-to-print metal component parts & assemblies to the defense, analytical instrumentation & transportation industries. Wide range of capabilities - close tolerance CNC milling & turning; 5-axis machining; optomechanical component machining; sheet metal fabrication; custom electronic enclosures; welding; mechanical assembly; 3D printing.

www.icacorp.com

Quality Certifications: ISO 9001:2008 • ITAR REGISTERED
J & R MACHINE INC.     Booth # 351
Service Categories: Machining - CNC Milling & Turning • Machining - Production • Machining - Precision CNC • Machining - Conventional CNC • Machining - Castings

We are a knowledge based contract machine shop that solves complex machined part problems through value-added manufacturing, engineering, machining, quality, and exceptional customer service. Additional Services; machining of stainless steel and exotic materials, thread rolling, robotic welding, mechanical assemblies, die-cast aluminum, and aluminum extrusions.

www.jrmachine.com

Quality Certifications: ISO 9001:2008
LUSTRE-CAL CORPORATION     Booth # 235
Service Categories: Bar Coding • Plastics - Hot Stamping & Screening • Switches - Membrane • Labels, Tapes & Decals • Die-Cutting

Manufacturer of high quality custom labels, nameplates, panel overlays, serialized & bar-coded property ID labels, membrane switches, shielding, and custom converted products. Laser cutting also available.

www.lustrecal.com

Quality Certifications: CSA & UL APPROVED • ISO 9001:2008 • MIL-P19834B • MIL-P6906B
MC ELECTRONICS     Booth # 409
Service Categories: Wire & Cable Harnesses • Assemblies - Cable • Assemblies - Electromechanical • Rapid Prototyping • Engineering & Technical Services

We are a custom cable assembly, wire harness, and box build manufacturer based in Hollister, CA. Our team of experts work across all engineering and manufacturing processes, from concept development through product life-cycle support. We hold Certifications for ISO 9001:2003, ISO 13485:2008, are RoHs compliant, and build to IPC-WHMA-A-620 workmanship standards.

www.mcelectronics.com

Quality Certifications: ISO 13485:2003 • ISO 9001:2008 • IPC/WHMA-A-620
MCNEAL ENTERPRISES INC.     Booth # 238
Service Categories: Plastics - CNC Machining • Fabricating - Plastic • Prototypes - Plastic • Plastics - Thermoforming/Vacuum Forming • Assemblies - Mechanical

Company provides prototype through production precision machining, fabricating, thermoforming & poly-welding of all plastics & assembly. All products built to customer specifications. Technical assistance is offered for engineering & materials selection. Capabilities include multilayer manifolds, CMP retaining rings & packaging.

www.mcneal.com

Quality Certifications: MIL-STD-45208 • ISO 9001
METALSTAMP INC.     Booth # 333
Service Categories: Stampings - Metal • Stampings - Brass • Stampings - Copper • Stampings - Progressive Die • Stampings - Ferrous & Non Ferrous

A job shop stamping facility providing both ferrous & non-ferrous stampings coupled with complete engineering & tool room capabilities. Presses range from 30 ton to 330 ton.

www.metalstampinc.com

Quality Certifications: ISO/TS 16949:2009
MODUS ADVANCED INC.     Booth # 211
Service Categories: Rubber Molding • Gaskets, Seals, Washers & O-rings • Shielding - EMI/RFI • Fabricating - Foil, Films & Foams • Plastics - CNC Machining

When your project demands attention to detail, choose WRS. For over three decades, our experienced craftsmen have established WRS as an authority for Custom Molded Rubber and Plastic, Die Cut and Form-in-Place Gaskets, Water Jet Cutting, EMI Shielding/RF Absorbing Materials, Thermal Management, and Vibration Isolation.

www.modusadvanced.com

Quality Certifications: ISO 9001:2008 • AS 9100
NORTHWEST DIE CASTING LLC     Booth # 501
Service Categories: Castings - Die • Castings - Die, Aluminum • Castings - Die, Zinc • Machining - Castings • Tooling - Casting

A trusted Aluminum die cast & Zinc die cast supplier to some of the leading Automotive, Heavy Truck, Electrical, Medical, Irrigation, and Aerospace companies in the world. With our in-house machine shop we have the ability to offer full turnkey solutions. If price and delivery is important to you check us out. We are located in Tualatin, Oregon.

www.nwdiecasting.com

Quality Certifications: ISO 9001:2008
NORTHWEST SWISS-MATIC LLC     Booth # 119
Service Categories: Screw Machining • Screw Machining - Swiss/CNC Swiss • Screw Machining - Escomatics • Assemblies - Mechanical • Grinding - Centerless

Precision screw machine parts up to 2 5/8" diameter. All materials. Complete secondary operations including CNC chuckers, grinder, honing, thread rolling, milling, drilling and deburring. ITAR Certified.

www.nwswissmatic.com

Quality Certifications: ISO 9001:2008 / AS9100-C • MIL-I-45208 • MIL-I-45662 • MIL-Q-9858
PACIFIC STATES FELT & MFG. CO. INC.     Booth # 132
Service Categories: Gaskets, Seals, Washers & O-rings • Die-Cutting • Rubber Fabrication • Die-Cutting - Felt, Cork & Rubber • Rubber Stampings

Manufacturer of gaskets from non-metallic materials: cork, felt, foam, fibre, plastics, rubber, & sponge. Rubber extruded and molded parts, O-rings, EMI/RFI shielding, Die-cutting, fabrication & adhesive laminating. Mfgrs. of felt, foam & sponge rubber strips & adhesive backed tapes. ISO 9001:2008 Compliant. For more information, email us at sales@pacificstatesfelt.net.

www.pacificstatesfelt.com

PENCOM     Booth # 327
Service Categories: Fasteners • Machining - CNC Milling & Turning • Screw Machining • Material Handling • Assemblies - Mechanical

Global source for custom and standard fasteners; mechanical components and thermal management solutions. Our motto: Manufacturing Globally….Supplied Locally captures our ability to provide customers with low-cost production advantages and inventory automation capabilities from our twenty-five global facilities.

www.pencomsf.com

Quality Certifications: ISO 9001 • RoHS
PROGRESSIVE CONCEPTS MACHINING     Booth # 429
Service Categories: Machining - Precision CNC • Machining - Production • Machining - CNC Milling & Turning • Welding & Weldments

A woman owned Bay Area precision CNC machine shop, PCM specializes in short and long run production. We are experienced in manufacturing parts and sub-assemblies for a wide-range of industries, including government, the semiconductor equipment, communications, & medical industries. We are actively pursuing our ISO 9001:2008 certification.

www.proconmach.com

Quality Certifications: AWS-CWI
RAY PRODUCTS INC.     Booth # 253
Service Categories: Plastics - Pressure Forming • Plastics - Thermoforming/Vacuum Forming • Plastics - Painting • Packaging • Fabricating - Plastic

Experts in custom heavy gauge thermoforming, including both pressure forming & vacuum forming. Forming capabilities up to 10' x 18' with 6 axis robotic trimming. Preferred supplier to the medical, electronics, telecommunications, automotive, recreational vehicle, green energy and pool & spa markets. In-house painting and contract manufacturing.

www.rayplastics.com

Quality Certifications: ISO 9001:2008 • UL LISTED
RD RUBBER TECHNOLOGY CORP.     Booth # 217
Service Categories: Rubber Molding • Silicone / Rubber - Liquid Injection Molding • Rubber To Metal Bonding • Prototypes - Rubber • Rubber - Injection Molding

Offering liquid silicone (LIM) & silicone rubber molding of precision parts to meet quality & design standards. Metal to Rubber Bonding, Silicone to Plastic Bonding, Cleanroom molding, in-house deflashing, & other value-added operations available. A full line of elastomeric materials is available for LIM, injection, transfer & compression molding.

www.rdrubber.com

Quality Certifications: ISO 9001:2008 • DOE-1050 • ITAR REGISTERED
SEAHAWK MANUFACTURING     Booth # 325
Service Categories: Rubber Molding • Rubber - Compression Molding • Rubber - Transfer Molding • Rubber To Metal Bonding • Rubber - Injection Molding

Custom rubber molding manufacturer. Rubber parts including seals, gaskets, o-rings, grommets, EMI/RFI shielding, custom shapes and more, using compression molding, injection molding and transfer molding. ISO 9001:2008 certified. Reaux Medical Molding is our parallel company dedicated to medical device molding and is ISO 13485:2003 Certified. Email sales@seahawkmfg.com.

www.seahawkmfg.com

Quality Certifications: ISO 9001:2008 • ISO 13485:2003
SIMALEX MANUFACTURING     Booth # 405
Service Categories: Castings - Die, Aluminum • Castings - Die, Zinc • Castings - Die, Magnesium • Castings - Die • Castings - Non-Ferrous

An Aluminum, Zinc and Magnesium manufacturing company with over 50 years experience in the industry. We work with you to ensure you get the parts and quality you need. Whether you are a small or large company doing short or long run projects, we are always here to assist you. Our design for manufacturing assistance is something you can use to optimize your product.

www.simalex.com

Quality Certifications: ISO 9001:2008
SMALLEY     Booth # 123
Service Categories: Snap Rings & Retaining Rings • Springs - Coil • Springs - Wave • Springs - Flat • Fasteners

We are the exclusive manufacturer of the industry-leading Spirolox® Retaining Rings, an innovative design that features a no gap, 360° retaining surface without protruding ears to interfere with mating components. We are also the originator of Crest to Crest® Wave Springs which save up to 50% of space compared to conventional coil springs.

www.smalley.com

Quality Certifications: ISO 9001 & ISO 13485 • ISO/TS 16949 • AS 9100 • ISO 14001
STRATASYS DIRECT MANUFACTURING     Booth # 216
Service Categories: 3D Printing • Rapid Prototyping • Prototypes - Plastic • Prototypes - Models • Electronic Enclosures

We offer proven 3D printing and custom manufacturing solutions that allow organizations to innovate rapidly and move to market quickly. Services include additive manufacturing, rapid prototyping, urethane casting, CNC machining, tooling, injection molding and professional finishing. ISO 9001 and AS9100 certified.

www.stratasysdirect.com

Quality Certifications: ISO 9001 • AS 9100
TECH-ETCH INC.     Booth # 106
Service Categories: Chemical Milling • Photochemical Etching & Machining • Shielding - EMI/RFI • Circuits - Flexible • Assemblies - Circuits

Photoetching services featuring specialty materials: tungsten, titanium, polyimide, elgiloy, molybdenum & nitinol. Flexible circuits manufacturer featuring fine line technology, microvias & SMT Assembly. EMI/RFI shielding products manufacturer specializing in beryllium copper spring fingers, conductive fabric gaskets & knitted wire mesh.

www.tech-etch.com

Quality Certifications: ISO 9001:2008 • AS 9100 REV C
TUV RHEINLAND - NORTH AMERICA     Booth # 340
Service Categories: Testing - Non-Destructive • Testing - EMI/RFI • Testing - Environmental • Testing - Mechanical Standards • Testing - Printed Circuit Boards

We offer expert third-party testing to almost any product safety standard including ANSI/UL, ASTM, CSA, EN, IEC, ISO and NFPA. Additional services include EMC/Wireless Testing, Wi-Fi, Zigbee, Green Services, Lighting, and Market Access. Our laboratories are recognized by major accreditation bodies, including OSHA (NRTL), Standards Council of Canada, IECEE, FCC and more.

www.tuv.com/us

Quality Certifications: ISO 9100:2001 • ANSI/ASQC • UL LISTED
UNITED WESTERN ENTERPRISES INC.     Booth # 237
Service Categories: Photochemical Etching & Machining • Shielding - EMI/RFI • Springs - Flat • Chemical Milling

Photochemical etching of thin metal parts from aluminum, copper, beryllium copper, nickel, nickel alloys & stainless steel alloys in thickness ranging from 0.0003" to 0.063". In addition to etching, we provide in-house forming and laser welding. We will take responsibility for heat treating, plating and other value added services. Etching applications are shims, shielding, flat springs, lead frames, fine screens & other thin metal parts.

www.uweinc.com

Quality Certifications: AS9100C / ISO 9001:2008 • ITAR REGISTERED
UNIVERSAL PLASTIC MOLD (UPM INC.)     Booth # 441
Service Categories: Plastics - Injection Molding • Plastics - Painting • Plastic Coatings - EMI/RFI • Assemblies • Molds & Moldmaking - Plastic

We have a world-class facility and are one of the largest injection molding manufacturers on the West Coast. 50 years experience - custom large part injection molding - 37 injection molding machines 200-2000 tons - ISO/TS 16949 compliant - ISO 9001:2008 registered - ESD Assembly - Product Assembly - Painting / Shielding - 3PL - Kanban Fulfillment - Mold / Part Design.

www.upminc.com

Quality Certifications: ISO 9001:2008 • FDA REGISTERED • UL REGISTERED
XACT WIRE EDM CORP.     Booth # 240
Service Categories: EDM - Wire • EDM - Small Hole Drilling • EDM • Machining - Production • Laser Marking

We specialize in providing cost effective wire EDM & high speed small hole EDM services to customers in the defense, medical, aerospace, electronics, energy, automation, robotics, MIM, PM & AM, & the metal machining & tooling industries. We have 45 wire EDM machines, 7 high-speed small hole machines & laser part marking. Locations in Waukesha, WI & Cary, IL. ISO 9001:2008

www.xactedm.com

Quality Certifications: ISO 9001:2008
3D SYSTEMS (CIMATRON SOFTWARE)     Booth # 305
Service Categories: CAD/CAM Software

Cimatron is now part of 3D Systems, including CimatronE CAD/CAM software solutions for mold, tool and die makers as well as manufacturers of discrete parts. Please visit www.cimatrontech.com or www.3dsystems.com for more information.

3D-CAM INC.     Booth # 109
Service Categories: Rapid Prototyping • Tooling - Models & Prototypes • Tooling - Plastic Injection Molding • Prototypes - Models • Prototypes - Rapid Casting

In-house SLA, RTV Tooling/Urethane Castings, Prototype/Production Tooling, Injection Molding, Paint Shop, Appearance Models, Wax Patterns/Metal Castings, CNC Machining. MegaRoller, Inc. represents the best in rapid prototyping, sheet metal, injection molding, RIM molding, wire forming, machining and 3D printing. Contact: Kevin Kingston 831-295-3316.

Quality Certifications: AS 9100 REV B
5TH AXIS INC.     Booth # 453
Service Categories: Machining • Machining - Multi Axis • Machining - Precision CNC • Machining - Production • Machining - CNC Milling & Turning

Southern California‘s leading CNC machining facility. 5th Axis® Inc. offers: Expert Mechanical Engineering, Automated Production, Rapid Turnaround, Cost Efficiency, Quality Manufacturing and Customer Satisfaction. Our Five Axis CNC machines allow for rapid and efficient machining.

Quality Certifications: AS 9100 REV B • ISO 9000:2001 • ITAR
A.L. JOHNSON CO.     Booth # 108
Service Categories: Castings - Aluminum • Prototypes - Rapid Casting • Castings - Zinc

Rubber Plaster Mold (RPM) process. Thin wall, fine surface, no draft, close tolerance, quick delivery, inexpensive, permanent tooling. Production quantities from prototype tooling. Complete machining and finishing. Castings - plaster mold & rubber mold.



Quality Certifications: AS 9100 • ISO 9001
ABX ENGINEERING INC.     Booth # 454
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Electromechanical • Testing - Printed Circuit Boards • Assemblies - Turnkey • Assemblies - Electronic

Full Service Electronic Contract Manufacturer providing PCBA to ElectroMechanical Assembly, Cable Assembly. Services have NPI (New Product Introduction/Prototype), Low to High Mix/Volume, PCBA, AOI, X-Ray, Full Test, Fulfillment (Ship to end Customers) and Depot Repair. The new additional Facility that opened December 2013, brings our Square Footage to 55,000.

Quality Certifications: ISO 9001:2008 • ISO 13485:2003 • IPC 610 • ITAR
ACF COMPONENTS & FASTENERS INC.     Booth # 343
Service Categories: Fasteners • Electronic Hardware • Industrial Supplies • Shielding - EMI/RFI • Gaskets, Seals, Washers & O-rings

A worldwide Master Stocking Distributor for AVK, BIVAR, HEYCO, FEDERAL-MOGUL, GENERAL CABLE, KEYSTONE, PANDUIT, PIC DESIGN, RAF, RICHCO, SHAKEPROOF, SUMITOMO, 3M, ZIERICK, and many other name-brand fastener and electromechanical component manufacturers, and is among the leaders in engineered specialty fasteners.

Quality Certifications: ISO 9001:2008
ADVANCED MACHINING TECHNIQUES INC.     Booth # 140
Service Categories: Machining - CNC Milling & Turning • Machining - Multi Axis • Welding - TIG Aluminum • Machining

We are a precision manufacturer providing quality CNC machining & sheetmetal products at globally competitive prices through the use of unmanned machining cells & lean mfg. principles. We perform certified welding & mechanical assembly. Call us for details if you have a need for Hubzone Certification.

Quality Certifications: AS 9100 REV C • ISO 9001:2008 • ISO 13485 / ITAR Certified • AWS D1.1 / AWS D1.2
AERO-SPACE SOUTHWEST INC.     Booth # 431
Service Categories: Fasteners • Slides • Electronic Hardware • Shielding - EMI/RFI • Assembly Hardware

We are a certified distributor of fasteners and electronic components serving avionics, gaming, medical, energy, aerospace and defense markets.

Quality Certifications: ISO 9001:2008 • AS9120
A-LASER     Booth # 329
Service Categories: Laser Cutting • Laser Machining - Micro • Laser Drilling • Laser Marking • Photochemical Etching & Machining

A premier precision parts manufacturer, providing consistent, high quality laser services for a wide range of industries. Specializing in the processing of ultra-thin materials, our technicians provide solutions for your most challenging applications.

Quality Certifications: ISO 9001:2008
ALL FLEX FLEXIBLE CIRCUITS & HEATERS     Booth # 311
Service Categories: Circuits - Flexible • Fabricating - Printed Circuit Boards • Prototypes - Electronic • Assemblies - Circuits • Surface Mount Technology - Assembly

Prototype to high volume flexible circuit and heater manufacturer. Multi-layer, Maxi-flex®, single and double-sided with fine line capability and assembly. Now manufacturing HighTemp™ flex and heaters and offering an online heater configurator. For 25 years we have provided interconnect solutions to the medical, aerospace, military, industrial, and instrumentation markets.

Quality Certifications: AS 9100 REV C / ISO 9001:2008 • ITAR • IPC CLASS 3 • MIL-P-50884
ALLMOTION INC.     Booth # 338
Service Categories: Motion Control • Motors & Drives • Heat Sinks

Manufactures Stepper Drives, Stepper Controllers, Servo Drives and Servo Controllers. The most compact Intelligent Stepper Motor Drives and Stepper Motor Controllers on the market today. Our Servo Motor Controllers and Brushless DC Motor Controllers feature quadrature encoder feedback and are also programmable to allow stand-alone operation.

AM COMPASS GROUP INC.     Booth # 515
Service Categories: Machining • Molds & Moldmaking - Plastic • Metal Injection Molding • EDM • Stampings - Metal

Offering one-stop shopping options to assist your mechanical needs from prototype to volume production with combination of CNC machining, injection molding, metal injection molding (MIM), and die casting. We have experienced engineers and skilled mechanics to produce high quality parts promptly at aggressive prices. We will be happy to support you!

Quality Certifications: ISO 9001:2000 • ISO 14001
ANDERSON QUALITY SPRING MFG. INC.     Booth # 205
Service Categories: Springs - Coil • Springs - Flat • Springs - Wave • Assemblies • Stampings - Fourslide

Custom manufacturer of springs, wire forms and formed metal products. Our customers are in the automotive, sporting goods, electronic, medical, dental and motorcycle suspension products industries, worldwide. We work with our customers from design and prototyping to supplier managed inventory programs.



Quality Certifications: ISO 9001:2015 • IATF 16949:2016
ANSYS (FORMERLY SPACECLAIM)     Booth # 335
Service Categories: Reverse Engineering • 3D Printing • CAD/CAM Software • Software For Job Shops & Manufacturers • Jigs & Fixtures

Built on direct modeling technology, ANSYS SpaceClaim is a multipurpose 3D modeling tool delivering faster solutions in market segments such as 3D printing, concept modeling, design, manufacturing, reverse engineering, and simulation/CAE. ANSYS SpaceClaim is part of ANSYS Inc., the global leader in engineering simulation software.

AQS INC.     Booth # 107
Service Categories: Assemblies - Turnkey • Assemblies - Printed Circuit Boards • Assemblies - Electrical • Assemblies - Electromechanical • Optical Components

EMS Provider with capability to support from early design to market in shortest time frame at very low cost solution. Full support of PCBA & box build from NPI to mass production. ITAR Compliant.



Quality Certifications: IPC610B • ISO 9001 • TUV / UL LISTED • ISO 13485
ARGO SPRING MFG. CO. INC.     Booth # 124
Service Categories: Springs - Coil • Springs - Flat • Wire Forming & Fabricating • Stampings - Fourslide • Stampings - Metal

Manufacture CNC Coil springs, Flat springs, CNC wire forms, Metal Stampings, Fourslide products, assemblies (welding, staking, riveting etc.), washers (Belleville and curved) to blue print or specifications. AS9100 Certified.

Quality Certifications: ISO 9001:2008 • AS 9100C
BAL SEAL ENGINEERING INC.     Booth # 308
Service Categories: Shielding - EMI/RFI • Springs - Coil • Gaskets, Seals, Washers & O-rings • Fasteners

A global provider of custom-engineered sealing, connecting, conducting and EMI shielding solutions for industry worldwide. The company’s products employ unique Bal Spring® canted coil spring technology for enhanced equipment performance and reliability. Email: sales@balseal.com Phone: 800.366.1006



Quality Certifications: ISO 9001:2008 • ISO/TS 16949:2009
BARE BOARD GROUP     Booth # 110
Service Categories: Fabricating - Printed Circuit Boards • Printed Circuit Boards - Aluminum Clad • Circuits - Flexible • Prototypes - Fabrication • Prototypes - Electronic

Prototype through production, BBG is dedicated to providing quality PCB's built domestically & offshore. Rigid, Rigid Flex, Flex & Metal Clad PCB's. ITAR Registered (Domestic & Offshore), Military and Aerospace production. Specializing in RF; Medical; LED Lighting, Automotive and ITAR applications. BBG is also WEE, UL and RoHS Compliant and a Minority Business Enterprise.



Quality Certifications: ITAR • ISO 9001:2008 • TS 16949 • ISO 14001
BAY SEAL CO.     Booth # 350
Service Categories: Gaskets, Seals, Washers & O-rings • Rubber Molding • Rubber To Metal Bonding

Specializing in Engineered Sealing Solutions from o-rings (including spliced) to gaskets & tight tolerenced custom rubber molded shapes in all materials, including FFKM (Kalrez). We will help solve your most difficult sealing applications.

Quality Certifications: ISO 9001
BEVEL CORP.     Booth # 410
Service Categories: Aluminum - Materials • Assemblies - Mechanical • CAD Design Services • Connectors & Couplings • Copper - Materials

Precision towards zero tolerance, has been servicing our major customers since 1999 for fast turn around prototypes, mass production on medical parts, robotic parts and green energy parts we serve customers like Trimble, Solta Medical, Microsoft etc. and have capability to mass produce in USA with competitive costs.

BISCO INDUSTRIES     Booth # 320
Service Categories: Fasteners • Electronic Components • Electronic Hardware • Assembly Hardware • Bearings

We are a premier distributor of Electronic Components and Fasteners used for production in Aerospace, Communication, Computer, Fabrication, Industrial Equipment, Instrumentation, Marine and Military Industries. We strive to be our customers' sole supplier of electronic components and fasteners by being a local presence and providing exceptional service.

Quality Certifications: AS 9100 • ISO 9001:2008 • BOEING APPROVED • LOCKHEED MARTIN
CALIFORNIA CASTER AND HAND TRUCK CO.     Booth # 401
Service Categories: Wheels & Casters • Material Handling • Polyurethane - Rollers • Bearings • Levers, Knobs & Handles

For over 60 years California Caster has helped customers find the right caster, wheel, leveler and material handling equipment to meet specific needs. We offer economical mobility solutions.

Quality Certifications: SAE • UL APPROVED • NSF / RoHS • ISO 9001-2000
CALPIA - JOINT VENTURE PROGRAM     Booth # 432
Service Categories: Manufacturing Association • Assemblies • Packaging • Assemblies - Turnkey • Wire & Cable Harnesses

The Joint Venture Program (JVP) provides vocational training opportunities to offenders within California’s correctional settings and it offers businesses attractive benefits for employing them. Your profit. Their opportunities. Our commitment.

CAPLUGS      Booth # 517
Service Categories: Plastics - Injection Molding • Plastics - Extruded Profiles • Die-Cutting • Tooling

A worldwide leader in product protection for over 65 years. We specialize in six different molding processes allowing us to offer a variety of design and material options. Our catalog highlights 12,000+ parts in stock and ready to ship. If a part doesn’t meet your requirements, our team of engineers will work with you to design exactly what is needed.

Quality Certifications: ISO 9001 • ISO/TS 16949 • ISO 13485 • ISO 14001
CELLOTAPE-A RESOURCE LABEL GROUP CO.     Booth # 352
Service Categories: Labels, Tapes & Decals • Die-Cutting • Nameplates, Dials & Panels • Switches - Membrane • Rubber - Compression Molding

Manufactures pressure sensitive labels, RFID tags and custom die cut components - overlays, nameplates, insulators, gauges, EMI/RFI shielding, gaskets, shims spacers, shock absorbers, LRF components, tamper-evident security seals & others. Cellotape's print processes include screen, thermal transfer, hot stamp, digital, flexography, RFID & Near Field Communications converter.

Quality Certifications: UL CERTIFIED • ISO 9001:2015 • RoHS
CENTURY SPRING CORP.     Booth # 223
Service Categories: Springs - Coil • Stampings - Fourslide • Wire Forming & Fabricating • Springs - Flat • Springs - Wave

A MW Industries location, is the go-to source for Made in USA stock and custom springs, for any OEM or MRO application. Same day shipments from over 35,000 stock designs - compression, extension, torsion, tapered, disc, urethane and die springs. Century also specializes in custom springs. Inquire at info@centuryspring.com. FREE CATALOG upon request.



Quality Certifications: ISO 9001:2008
COMPASS MFG. SERVICES     Booth # 342
Service Categories: Assemblies - Electromechanical • Assemblies - Electrical • Cable & Wire Manufacturing • Instrumentation & Controls • Panels - Control

We are a well established electronic contract manufacturer specializing in System Integration, Electro-Mechanical Assembly, along with cables and harnesses. CMS supports many Fortune 500 companies in Transportation, Semiconductor Equipment, Energy, Industrial, and Medical sectors.

Quality Certifications: ISO 9001:2008 • UL 508A • RoHS • CSA & UL APPROVED
COMPASS PRODUCT DESIGN INC.     Booth # 433
Service Categories: Industrial Design Services • CAD Design Services • Engineering & Technical Services • Plastic Cabinets & Enclosures

Designs That Work - Brands That Sell. Compass Design is an award-winning product design and development firm with offices in Silicon Valley and Tennessee. We design and engineer innovative products, intuitive interfaces and compelling brands. We have expertise in medical devices, consumer electronics, sporting goods, toys, business/office and communications products.

COMPUTROL INC.     Booth # 227
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Electromechanical • Assemblies - Turnkey • Wire & Cable Harnesses • Assemblies - Electronic

Full Service Turnkey Electronic Contract Mfg. company specializing in low - medium volume, high mix & high technology assembly to all industries including Military, Medical & Industrial. Box Build, Cable & Wire harness assembly, SMT, through-hole & mixed technology board assembly. Multiple facilities to serve you with lines consisting of state-of-the-art SMT equipment, X-Ray, XRF, AOI & Selective Solder machines. Full test capabilities, including ICT, Flying Probe, Functional test & Boundary Scan/JTAG programmability & test. Valor online documentation system with DFM/DFT analysis tool. Contact Kevin Kimsey at 208-887-1000 or kkimsey@computrol.com.

Quality Certifications: AS 9100 / ISO 9001 • ISO 13485 • IPC 610, 600, 620 • J - STD / ITAR REGISTERED
CONNECTICUT COINING INC.     Booth # 215
Service Categories: Stampings - Deep Drawn Shells • Stampings - Short Run • Stampings - Metal • Stampings - Ferrous & Non Ferrous • EDM

Deep drawing specialist in a wide range of metals based on customers' supplied drawings. All required tooling is built and tested on site. We supply small to medium production runs to the high voltage power & X-ray tube manufacturers; as well as components for aerospace and other industries.



Quality Certifications: AS 9100C • ISO 9001:2008 • ITAR REGISTERED
COOLING SOURCE     Booth # 507
Service Categories: Machining • Engineering & Technical Services • Extrusions - Aluminum • Prototypes - Machining • Plastics - Injection Molding

A heatsink manufacturer offering the most comprehensive value-added standardized or custom heatsink solutions for today's global market. Using the very latest technology available to heatsink manufacturers, we offer a wide range of products for our global market clients.

Quality Certifications: ISO 9001:2015 • ITAR
C-PAK INDUSTRIES INC.     Booth # 315
Service Categories: Plastics - Rotational Molding • Molds & Moldmaking - Plastic

Rotational molding and assembly of products with complex & varied shapes, producing seamless hollow plastic parts of exceptional strength and durability, as well as rotational molds & associated tooling.

CREATIVE MFG. SOLUTIONS     Booth # 303
Service Categories: Fabricating - Sheet Metal • Laser Cutting • Machining • Prototypes - Machining • Assemblies

We are a full service machining & sheet metal manufacturing comapany that provides one-stop shopping for all your design & manufacturing needs.

Quality Certifications: ISO 9001:2008
CYGNET STAMPING & FABRICATING INC.     Booth # 122
Service Categories: Stampings - Short Run • Fabricating - Sheet Metal • Laser Cutting • Prototypes - Rapid Sheet Metal • Prototypes - Stamping

Custom metal stamping & sheet metal fabrication using LOW COST tooling of our own unique design. Economical for production runs of 50 to 50,000. We also offer rapid prototype, laser cutting & machining. Email us for a quote at sales@cygnetstamping.com

Quality Certifications: ISO 9001
DA/PRO RUBBER INC.     Booth # 112
Service Categories: Rubber Molding • Plastics - Injection Molding • Silicone / Rubber - Liquid Injection Molding • Rubber To Metal Bonding • Rubber - Compression Molding

5 facilities for compression/injection molding - high-quality custom rubber, TPE, & plastic components molded to precision tolerances such as diaphragms, seals, connectors, molded shapes, rubber to metal parts for medical device, electronic & aerospace industries. Class 10,000 cleanroom - chemists & engineers assist in optimal moldability. sales@daprorubber.com



Quality Certifications: ISO 9001
DESIGN OCTAVES INC.     Booth # 111
Service Categories: Plastics - Reaction Injection Molding • Plastics - Low Volume • Electronic Enclosures • Plastics - Painting • Polyurethane - Parts

Our clients are Medical, Instrumentation, Analytical, Government & Security Companies. We specialize in UL94V-O enclosures in quantities of 100-5000 units per year. All tooling is built In-house to the most stringent standards & guaranteed for a minimum of 10,000 cycles. Also, we provide Painting, UL Approved Shielding & Decoration.

Quality Certifications: UL-QMRX2 • UL-QMMY2 • ISO 9001:2008
DIAMOND TOOL & DIE INC.     Booth # 224
Service Categories: Machining - CNC Milling & Turning • Machining - Precision CNC • Plastics - CNC Machining • Prototypes - Machining • EDM - Wire

Full Service Jobshop, 45+ years experience. CNC (& Manual) Milling & Turning; Lathes up to 40" swing, Horizontals up to 70". In-house Wire EDM, Fixturing, Tooling, Welding, Honing, Grinding, Repairs, Reverse Engineering, Deburring, Assembly, Inspection. We machine all metals and plastics. Prototype to Production runs. Quality with competitive pricing. Employee owned.

DIRAK INC.     Booth # 512
Service Categories: Engineering & Technical Services • Assembly Hardware • Hinges • Gaskets, Seals, Washers & O-rings • Fasteners

We are the technology leader for industrial enclosure hardware – developing, manufacturing, and distributing innovative components for rack and enclosure construction; specializing in latching, hinging, and gasketing. Our high quality, customized products function either mechanically or electronically, and have been used for many years in the most demanding applications.

Quality Certifications: ISO 9001 • UL LISTED • UL RECOGNIZED
DPMS DBA DANCO MACHINE     Booth # 522
Service Categories: Machining - Precision CNC • Machining - CNC Milling & Turning • Machining - Production • Machining - Multi Axis • EDM

A precision contract manufacturer located in Santa Clara, CA. Core competencies include precision machined and assembled components for Medical, Aerospace, Defense, and other markets; helping customers with R&D/engineering support, wire & sinker EDM, supply-chain management, and DFM. Dedicated Program Managers and VOC/HOC processes deliver best-in-class customer service.

Quality Certifications: ISO 9001 • ISO 13485 • AS 9100:C • ITAR
DPSS LASERS INC.     Booth # 236
Service Categories: Laser Marking • Laser Engraving • Laser Cutting • Lasers

Low-cost “Quasi-CW” UV lasers, 0.1-5.0+Watts, 355nm with high peak powers. Applications using our UV “Cold-Laser” are Micromachining, Marking, Sapphire Scribing, ITO Removal, Semiconductor and Medical Packaging.

E. JORDAN BROOKES CO. INC.     Booth # 438
Service Categories: Materials - Metal & Non-Metal • Plastics - Sheet, Rod & Tube

Engineering solutions supplier of Copper Based Alloys and Industrial Plastics.

Quality Certifications: ISO 9001:2008 • ISOQAR REGISTERED • AS 9120A:2009
EDM TECHNOLOGIES INC.     Booth # 229
Service Categories: EDM • EDM - Wire • EDM - Sinker • EDM - Small Hole Drilling

Electrical discharge machining (EDM) shop specializing in Wire EDM, Sinker EDM, Small Hole EDM & precision machining. EDM Technologies is a certified precision tooling source.

Quality Certifications: ISO 9001:2008
ELECTROPIN TECHNOLOGIES     Booth # 443
Service Categories: Cold Heading - Cold Forming • Wire Forming & Fabricating • Thread Rolling • Thread Machining • Cleaning & Degreasing

Manufacturer of small pin shaped parts. Cold Heading & Die Pin Rolling are high speed, scrap free processes which yield tremendous cost savings.

Quality Certifications: ISO 9001:2000
EMKA INC.     Booth # 232
Service Categories: Assembly Hardware • Electronic Hardware • Hinges • Shielding - EMI/RFI • Gaskets, Seals, Washers & O-rings

A leading manufacturer of enclosure hardware. Products include handles, hinges, locks, latches, gasketing and accessories.

Quality Certifications: ISO 9001 • ISO 14001 • RoHS • UL APPROVED
ENERGY SALES     Booth # 444
Service Categories: Power Supplies & Batteries • Assemblies - Electromechanical • Electronics - New Product Development • Electronic Components

A custom battery design and manufacturing house specializing in ruggedized power solutions for extreme environments. We provide expert engineering advice, precision manufacturing and specialized transportation solutions, culminating in a seamless experience from concept design to commercial production. Offices in Sunnyvale, CA and Woodinville, WA.

Quality Certifications: FAA / UL94 / TUV • UN DOT WEE • RoHS / UL / CE / CSA • DOT-SP 20323
ENVIROSENSE INC.     Booth # 516
Service Categories: Cleaning & Degreasing • Assemblies - Electrical • Optical Components

We would like to introduce to you our company & chemistry. EnviroSense, Inc. was incorporated in 1993 with the purpose of providing environmentally safe chemicals for the cleaning of precision & electronic assemblies/components. The chemistries will clean optics glass, metals, plastics as well as other Hi-Rel fabrication materials. Our cleaning formulas are saponifiers, wetting agents and wash solution additives in concentrated form. We also manufacture rinse additives and coating removers.

EPILOG LASER     Booth # 201
Service Categories: Lasers • Laser Cutting • Laser Engraving • Laser Marking • Bar Coding

An industry leader in design of laser engraving, cutting & marking systems, manufacturers of the Epilog Zing, Mini, Helix, Fusion and FiberMark series of laser systems.



Quality Certifications: ANSI STANDARDS • IEC • CE • CFR 21
FABRI-TECH COMPONENTS INC.     Booth # 419
Service Categories: Electronic Components

Leading Material Converter, Gasket Fabricator & Custom Assembly Provider of Electro-mechanical Components with worldwide manufacturing capabilities. We manufacture completely customized protective components. Prototyping to production, label printing to subassembly and more. We serve a broad array of different industries and markets and would be happy to assist you.

FATHOM     Booth # 138
Service Categories: 3D Printing • Rapid Prototyping • Molds & Moldmaking - Plastic • Plastics - Injection Molding • Machining - Precision CNC

FATHOM is driven by advanced technologies. We leverage our expertise in 3D printing and additive manufacturing to help our customers innovate faster and more efficiently. Our product portfolio includes professional 3D printers and manufacturing systems, prototyping and advanced manufacturing services, with design and engineering resources in support of these.

FOAM CREATIONS 2008 INC.     Booth # 407
Service Categories: Foam Conversion • Fabricating - Foam • Mold Texturing • Molds & Moldmaking - Plastic • Tooling - Plastic Injection Molding

Manufacturers of XL Extralight (R), we are a North American foam elastomers manufacturer based in both Canada and Mexico, with Los Angeles based warehousing and distribution options. With 20 years of North American manufacturing and customer support, we are the leading USA supplier of high quality XL Extralight foam products.

FSINSPECTION     Booth # 442
Service Categories: Inspection Services • Measurement & Inspection • Measurement - Equipment • Measurement - Software

Develops high-definition visual inspection systems, specifically for the industrial inspection market to fit the advancing needs of the microscopic inspection industry. Each HD system is cost-effective, easy to use, and ergonomically designed to reduce operator strain, resulting in increased accuracy and improved productivity.

GASSER & SONS INC.     Booth # 120
Service Categories: Stampings - Deep Drawn Shells • Machining - CNC Milling & Turning • Stampings - Metal • Stampings - Progressive Die • Machining - Precision CNC

Since 1916 Gasser continues to Provide: Precision Deep Drawn Components, Secondary Machining, A Vast Tooling Library, Custom Formed Lead Lining for Housings and Assemblies, Design Engineering Services, Production Quantity Runs and Quality...with Confidence.

Quality Certifications: ISO 9001 • ITAR REGISTERED
GENERAL FOUNDRY SERVICE     Booth # 226
Service Categories: Castings - Aluminum • Castings - Plaster Mold • Castings - Sand & Shell • Castings - Permanent Mold • Castings - Investment

We are the only foundry offering 5 complementary casting processes, in-house patternmaking, machining, surface finishing, and inspection - a true best in class turnkey solution. Thin/thick walled, smooth surface, class A finishes, oz. to 500 lbs., design for manufacturing, breaking design rules with complex parts.

Quality Certifications: ISO 9001:2015 • ITAR REGISTERED
GENO MACHINO INC.     Booth # 502
Service Categories: Machining - CNC Milling & Turning • Prototypes - Machining • Machining - Stainless Steel • Plastics - CNC Machining • Machining

Geno Machino (dba Magic Machining) is known for manufacturing high quality, short run precision machined parts for many of the well-know names in Silicon Valley: Semi-conductors, Laser/Optics - Medical Devices - Custom Race Car/ Engines - Military/Defense - High Voltage Isolator as well as other custom projects for our clients.

GPC ELECTRONICS     Booth # 249
Service Categories: Assemblies - Electronic • Assemblies - Turnkey • Wire & Cable Harnesses • Surface Mount Technology - Assembly • Assemblies - Printed Circuit Boards

Since our inception in 1985, we've had a track record of working with leading OEMs in North America, Europe, Asia & the Pacific. We are able to customize processes, delivering unique solutions to our customers, providing them with a competitive advantage & positive outcomes. We are a full service EMS and cable harness provider with three manufacturing sites globally.



Quality Certifications: ISO 9000 • ISO 14000 • ISO 13485 • ISO/TS 16949
GRAPHICAST INC.     Booth # 245
Service Categories: Castings - Permanent Mold • Castings - Graphite Mold • Castings - Zinc • Castings - Non-Ferrous

Zinc alloy castings using unique graphite permanent mold process. Low cost graphite molds make this process ideal for low to medium quantities. Eliminate expensive CNC hog-outs, high tooling costs, and long lead-times. In-house design, mold building and precision CNC machining. Cosmetic and protective finishes available.



Quality Certifications: ISO 9001:2008
GREENE RUBBER CO. INC.     Booth # 234
Service Categories: Rubber Fabrication • Rubber Molding • Rubber - Transfer Molding • Silicone / Rubber - Liquid Injection Molding

Custom rubber gaskets & seals. Custom rubber molding, LSR, vibration isolation, rubber-to-metal bonding, Chomerics EMI & Thermal materials, Rogers Poron Urethane Foams, 3M Adhesives, Parker O-Rings, St. Gobain tubing and Panasonic PGS.

Quality Certifications: ISO 9001:2008 • AS9100C
HARMONY CASTINGS LLC     Booth # 125
Service Categories: Castings - Aluminum • Castings - Sand & Shell • Castings - Sand

We are a leader in the production of aluminum castings. We are an ITAR compliant and AS9100 Certified facility. Our V-process delivers tight tolerances, thin walls and excellent surface finish. Further we're able to bring your project from model to production in just three weeks.



Quality Certifications: ISO 9001:2008 • AS 9100 REV C
HAWK RIDGE SYSTEMS     Booth # 428
Service Categories: CAD/CAM Software • 3D Printing • Assemblies • Machining • Plastics - Injection Molding

A global provider of engineering design and manufacturing software including SOLIDWORKS 3D CAD, Hawk Ridge Systems has solutions for 3D design, simulation, plastics, assemblies and wiring. CAMWorks offers CNC machining and our 3D Printer line from HP, Markforged, and Artec provides the most competitive solutions for 3D printing. Ask us more at hawk@hawkridgesys.com.

HELICAL PRODUCTS CO.     Booth # 417
Service Categories: Couplings - Misalignment • Springs - Coil • Motion Control

Manufactures the HELI-CAL®Flexure. This highly engineered product makes bar stock flexible and can be found in applications ranging from satellite instruments to conveyors, medical devices and oil field equipment. It is commonly used as a flexible shaft, coupling, a u-joint, or a “machined” spring.

Quality Certifications: AS 9100 • ISO 9001:2008 • RoHS • ITAR
HYATT DIE CAST & ENGINEERING CORP.     Booth # 330
Service Categories: Castings - Die, Aluminum • Castings - Die, Zinc • Machining - CNC Milling & Turning • Powder Coating • Assemblies - Mechanical

Produces high-pressure aluminum and zinc castings up to 80 lbs. We also offer complete die cast tool design and fabrication, secondary CNC machining, powder coating, hardware assembly and kitting. We are ISO 9001:2008 and AS9100 Rev C certified. We have extensive experience in the aerospace, medical, electronics and gaming industries.

Quality Certifications: ISO 9001:2008 • AS 9100 REV C • BOEING APPROVED • HONEYWELL APPROVED
IMT PRECISION INC.     Booth # 403
Service Categories: Machining • Machining - Large Parts • Machining - CNC Milling & Turning • Machining - Weldments • Prototypes - Rapid Sheet Metal

We are the Bay Area's premier source for machining and sheet metal fabrication. Specializing in large machining (up to 200" x 135" x 42"), IMT Precision offers unparalleled service and capabilities. IMT is ISO 9001:2008 certified and has a 50,000 sq. ft. manufacturing facility in Hayward, CA.

Quality Certifications: ISO 9001:2000
INLAND METAL TECHNOLOGIES INC.     Booth # 332
Service Categories: Fabricating - Sheet Metal • Machining - CNC Milling & Turning • Prototypes - Fabrication • Assemblies - Mechanical • Engineering & Technical Services

A leading provider of precision sheet metal fabrications, enclosures, weldments & assemblies. Inland specializes in small to mid-volume production with extensive experience in DFM, NPI and Lean Manufacturing. Our engineers design innovative solutions for your manufacturing & fabrication challenges. For additional information please contact: sales@inlandmetal.com.

Quality Certifications: AS 9100 • ISO 9001:2008 • AWS D1.1 • RAYTHEON & ABBOTT CERTIFIED
INSACO INC.     Booth # 115
Service Categories: Grinding - Ceramics • Machining - Ceramics • Grinding - Glass • Ceramic Parts

Precision fabricator of ultra hard materials, utilizing advanced ceramic materials including sapphire, ceramics from all producers, glass, quartz, & many others. Machining to very precise dimension & tolerances in a variety of shapes & configurations as required. No standard parts/all mfg. to specific customer requirements. Prototype to production. No metals or plastics.



JACO MACHINE WORKS     Booth # 301
Service Categories: Machining - Precision CNC • Machining - Multi Axis • Machining - Swiss Laser & CNC Swiss • Assemblies - Mechanical • Engineering & Technical Services

Precision component manufacturing on 3, 4, 5 & 7-axis CNC machining centers. Our robust ISO 9001 certified quality system & lean manufacturing culture deliver superior value & outstanding service to our customers. Value added inventory management, quick prototypes & technical services complete the package. We excel at Kanban production!

Quality Certifications: ISO 9001:2008 • AS 9100C
JOHNSON CENTRIFUGAL TECHNOLOGY     Booth # 209
Service Categories: Forgings - Aluminum • Castings - Brass • Castings - Stainless Steel • Machining • Forgings - Seamless Rolled Rings

Formed aluminum, copper, stainless components to wrought properties. Excellent anodizing response with high vacuum integrity. Custom alloys & complete finished machining to your specifications.



Quality Certifications: MIL-SPEC 45208 • ISO 9001:2008
JWP MANUFACTURING     Booth # 206
Service Categories: Machining - CNC Milling & Turning • Screw Machining - Swiss/CNC Swiss • EDM - Wire • Prototypes - Machining • Machining - Multi Axis

From Microscopic Machining, to 50" x 80" envelope work pieces. JWP has eight 5-axis machining centers within 3 Cell systems, Horizontal, Vertical, Mill/Turning, Turn/Milling. Wire EDM, Stress Relief Heat-Treatment and Lapping. JWP serves the Medical, Commercial Aircraft, Defense, Laser/Optics and Semiconductor industries globally. NPI, Quick-turn, Production Complexed Machining, Medium and Simple in complexity.

Quality Certifications: ISO 9000:2008 • ITAR REGISTERED • ISO 13485 - AS9102
KASPAR MANUFACTURING     Booth # 230
Service Categories: Wire Forming & Fabricating • Fabricating - Sheet Metal • Machining - Conventional CNC

Family owned since 1898. Located between Houston & San Antonio. We specialize in custom fabrication of wire, sheetmetal, stainless steel & tubing, plating, powder coating & silkscreening services available.



KNIGHTSBRIDGE PLASTICS INC.     Booth # 344
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Plastics - Thermoset Molding • Plastics - Insert Injection Molding • Welding - Laser

A precision injection molder with an "In-House" toolroom. We specialize in small intricate parts using many high temperature & chemically resistant materials.

Quality Certifications: ISO 9001:2008 • ISO 13485:2003
KUBOTEK USA     Booth # 210
Service Categories: CAD/CAM Software • Software For Job Shops & Manufacturers

KeyCreator - The Most Complete Direct CAD Modeling Software - provides unmatched flexibility for manufacturers and product designers. Easily create conceptual designs or manufacturing ready 3D CAD with the power of Direct CAD. Import and edit nearly any CAD file for fast project turnaround. KeyCreator also features integrated add-ons for machining and analysis.



KURT MFG. CO.     Booth # 307
Service Categories: Machining - Precision CNC • Assemblies - Electromechanical • Castings - Die, Aluminum • Extrusions - Impact • Gaging - Custom Engineered

Precision CNC Machining - Turning and Milling. Multi-Axis and FMS lines. Development to production, impact extrusions, screw machining, class 1000 clean room, precision gears & assembly, aluminum die castings, custom gaging. Facilities in Minneapolis, MN, Lyman, NE & Pueblo, CO.

Quality Certifications: ISO 9001:2008 • AS 9100C
LASERAGE/VENTA MEDICAL/AMETEK EMC     Booth # 121
Service Categories: Welding - Laser • Laser Cutting • Laser Drilling • Laser Machining

Contract manufacturing utilizing a wide variety of materials offering precision laser welding, cutting, ablation, and drilling of metals, plastics and ceramics. Medical device components, cleanroom assembly and metal finishing operations. CO2, YAG, Fiber, Disk, Femto, DPSS & Excimer lasers. Glove box welding. Equipped to handle both low and high volume productions. Today manufacturing in northern California, Midwest and low-cost regions.



Quality Certifications: ISO 13485 • ISO 9001 • CLASS 7 CER
LEE SPRING     Booth # 251
Service Categories: Springs - Coil • Springs - Flat • Springs - Wave • Stampings - Fourslide

Springs in stock ready to ship or made to your specifications. Large selection of stock Compression, Extension, Torsion, HEFTY™ Die, REDUX™ Wave, LeeP™ Plastic Composite, MIL-SPEC, Belleville Washer, Battery and Constant Force Springs. Custom Springs, Stampings, Wire Forms and Fourslide design and manufacturing. Prototypes through large production runs.



Quality Certifications: ISO 9001 • RoHS / REACH • MIL SPEC AS24585 • MIL SPEC AS24586
MACHINING TECHNOLOGY     Booth # 434
Service Categories: Machining • Machining - CNC Milling & Turning • Machining - Castings • Machining - Large Parts

Serving the OEM market with precision machined parts since 1955. We have grown into a complete machining facility of 1-2 pc items, small and large quantity production runs, and cell type setups in medium to large size parts.

Quality Certifications: 6 SIGMA
MDI - MOLDED DEVICES INC.     Booth # 435
Service Categories: Plastics - Injection Molding • Plastics - Dip Molded • Plastics - Insert Injection Molding • Assemblies - Mechanical • Industrial Design Services

We have developed an excellent reputation as an industry leader in plastic processing. Offerings including plastic dip molding, dip coating, rubber dip molding, LIM, MIM, injection molding, multi-shot, clean room molding and assembly. MDI offers full product development and engineering services including DFM, DEA and MoldFlow.

Quality Certifications: ISO 9001 • ISO 13485:2003
MEGA ELECTRONICS INC.     Booth # 243
Service Categories: Power Supplies & Batteries • Wire & Cable Harnesses • Cable & Wire Manufacturing

Manufacturer of Power Cords & AC/DC~DC/DC Power Supplies for use on PCB, desk top, wall mount and open frame.



Quality Certifications: ISO 9001:2000
MELROSE NAMEPLATE & LABEL CO.     Booth # 203
Service Categories: Switches - Membrane • Nameplates, Dials & Panels • Labels, Tapes & Decals • Assemblies - Electronic • Engineering & Technical Services

Manufacturing: Touch screen assemblies, membrane switches, silicone keypads, graphic overlays, industrial and decorative nameplates, UL labels. Capabilities: -Backlighting, optical adhesives, chrome inks -Digital processing (laser, UV inkjet)-Acid etching, embossing, plating -ISO 9001:2008 -Design: EE and ME: IO interfaces (I2C, USB) and molded and metal enclosures.

Quality Certifications: UL APPROVED • CSA APPROVED
MERCURY CORP.     Booth # 220
Service Categories: Fabricating - Sheet Metal • Metal Cabinets & Enclosures • Assemblies - Turnkey • Fabricating - Aluminum • Fabricating - Stainless Steel

AN INTEGRATED SOLUTION TO YOUR SUPPLY CHAIN - we build custom racks, frames, enclosures, plastics & stamping assemblies. CORE PROCESSES: Design, Metal Fabrication, welding of all types of metals, Plastic Injection Molding, Finishing, Turn-Key Assemblies & KAN BAN.



Quality Certifications: ISO 9001:2008 • ISO 13485 • AS 9100 • ITAR REGISTERED
METALFX/ADVANCED MFG. & DEV.     Booth # 101
Service Categories: Fabricating - Sheet Metal • Metal Cabinets & Enclosures • Assemblies - Electromechanical

Custom design, manufacturing, and integration of sheet metal components for some of today's leading Electronic, Medical, Network, Life Science, and Test and Measurement companies. We also offer in-house weld, paint, powder coat and silk screen services.

Quality Certifications: ISO 9001:2000
MICRO-VU     Booth # 113
Service Categories: Measurement - Equipment • Measurement & Inspection • Inspection Services • Calibration & Metrology • Testing - Printed Circuit Boards

2D & 3D Measurement Systems, Quality Control & Inspection Equipment. Optical Comparators, Video & Vision CMMs, & Multi-Sensor Measurement Systems. Measure from Microns to 2 Meters.



Quality Certifications: ISO 17025
MINDRUM PRECISION INC.     Booth # 233
Service Categories: Machining - Precision CNC • Optical Components • Ceramic Parts • EDM - Wire • Machining - Ceramics

Custom machining & polishing of precision components & assemblies. 5-axis CNC milling, turning surface grinding, plano, spherical & cylindrical polishing continuous & double-side polishers, glassblowing, acid etching & soldering. Materials: glass, quartz, sapphire, ceramics & similar. Aluminum, stainless steel, titanium & simular. Class 1,000 cleanroom 100 with flo.

Quality Certifications: ISO 9001:2008 • MIL-I-45208A
MOS PLASTICS     Booth # 416
Service Categories: Plastics - Injection Molding • Tooling - Plastic Injection Molding

We specialize in high-precision, injection-molding, contract manufacture, and assembly of medical device, life science, and technology OEMs. After 35 years in the heart of Silicon Valley, we understand the performance expectations of cutting-edge companies delivering disruptive technologies.

Quality Certifications: ISO 9001:2008 • ISO 13485:2003
NATIONAL OILWELL VARCO     Booth # 439
Service Categories: Machining - CNC Milling & Turning • Machining - Multi Axis • Fabricating - Steel • Welding & Weldments • Machining - Weldments

The Worldwide leader in the design, manufacture, and sale of equipment and components used in oil & gas drilling and production operations. NOV's Orange, CA facility provides world-class manufacturing capabilities (machining, fabrication, assembly, paint, inspection, design, analysis, and engineering services) in a recently expanded, conveniently located facility.

Quality Certifications: ISO 9001:2008
NEUMAN ALUMINUM IMPACT EXTRUSION INC.     Booth # 306
Service Categories: Extrusions - Impact • Fabricating - Aluminum • Machining - Aluminum • Assemblies - Mechanical • Forgings - Cold

We are a leading manufacturer of aluminum impact extrusions for many different markets including automotive, defense, and electrical. Benefits include increased strength from cold working, uniform grain structure (no voids), and different wall and bottom thicknesses. We have in-house heat treatment and final CNC machining. We are ISO/TS 16949 & ISO 14001 certified.

Quality Certifications: ISO/TS 16949
NORTH STATE FASTENER INC.     Booth # 518
Service Categories: Fasteners • Electronic Hardware • Timing Pulleys & Belts • Hoses, Clamps & Fittings • Threaded Parts

Since 1972 we have been providing fastening expertise and solutions to our customers around the world. We supply a wide range of fasteners including: standard and custom, inch and metric sizes, electronic hardware, precision mechanical components, and tools. Our fleet of trucks deliver throughout the San Francisco Bay Area. We offer same day delivery if stock is available.

OCEAN PLASTIC PRODUCTS INC.     Booth # 430
Service Categories: Plastics - CNC Machining • Prototypes - Plastic

Plastic Fabrication and CNC Routing Services.

PACIFIC METAL STAMPINGS INC.     Booth # 103
Service Categories: Stampings - Short Run • Stampings - Metal • Stampings - Ferrous & Non Ferrous • Prototypes - Stamping • Laser Cutting

Specializing in short run to high production. We use low cost, life time tooling produced on our CNC machining center & wire EDM machines, providing savings of 50 to 80% of conventional tooling. Components for hundreds of aerospace, automotive, medical & electronic customers. Sheet metal fabrication, laser cutting & prototype. Quotes are answered within 24 hours.



Quality Certifications: ISO 9001:2008
PACIFIC TEXTURING AND LASER ENGRAVING     Booth # 520
Service Categories: Mold Texturing • Laser Engraving • Welding - Laser • 3D Printing • Molds & Moldmaking - Metal

Texturing, Laser Engraving and Welding. Mold Polishing. Automotive, Medical, Injection, Rubber and Blow molds. Laser Welding and Laser Engraving including 3D surfaces. Laser Marking.

PANELOC CORP.     Booth # 437
Service Categories: Hinges • Fasteners • Assembly Hardware

A US manufacturer of hinges, latches & quarter-turn fasteners. Our products are precision engineered & manufactured. CAD drawings are available on our website.

PEKO PRECISION PRODUCTS INC.     Booth # 317
Service Categories: Assemblies - Turnkey • Machining - CNC Milling & Turning • Fabricating - Sheet Metal • Systems Integration • Machinery - Design, Build & Rebuild

A Vertically Integrated Contract Manufacturer with four major divisions: CNC Machining: 85 turning & milling CNC machines; the largest is 106" x 161" x 42", Sheet Metal/Stamping with state-of-the-art equipment including robotic welding. Assembly Division: Assembly & test of top level OEM product/equipment. Systems Division: Design & build automated test & assembly equipment.



Quality Certifications: ISO 9001:2000 • ISO 13485 • AS 9100 • TUV / UL CERTIFIED
PENCO PRECISION INC.     Booth # 250
Service Categories: Machining - Production • Machining - Precision CNC • Machining - CNC Milling & Turning • Machining - Aluminum • Machining - Stainless Steel

We work with all industries including aerospace, computer, medical and high end commercial. Short to medium run lots and we also machine castings. Small to medium size parts. Maximum work piece: milling, 24" X 40" X 28"; turning, 11" X 32". 5,000 shop hours/month. 100% Woman Owned and Operated.



Quality Certifications: ISO 9001:2008 • AS9100C • ITAR REGISTERED • WBE
PENINSULA SPRING     Booth # 402
Service Categories: Springs - Coil • Springs - Flat • Stampings - Short Run • Wire Forming & Fabricating • Prototypes - Rapid Sheet Metal

A leader in precision spring manufacturing since 1976. We specialize in custom springs, sheet metal stampings, electrical contacts, clips and wire forms. With our highly skilled staff, combined with engineers that have years of custom spring manufacturing experience, we are able to fabricate almost anything that can be coiled, stamped, or formed!

Quality Certifications: DDTC Registered • RoHS • ITAR
PERIDOT CORP.     Booth # 302
Service Categories: Assemblies • Wire Forming & Fabricating • Machining • EDM • Lasers

FAST PROTOTYPES! AND PRODUCTION! Assemblies! New project experts. Super ability to handle challenging small parts. Shielding, battery contacts, wire forms, springs, hypo-tube fabrications, stamping, small precision components. Excellent supply & development partner to medical, telecom, wireless & emerging technologies. Class 10000 Cleanroom.

Quality Certifications: ISO 9001:2000 • ISO 13485 • CLASS 10K CLEAN ROOM
PETERSEN PRECISION ENGINEERING LLC     Booth # 231
Service Categories: Stampings - Fineblanked • Grinding - Creep Feed • Machining - Precision CNC • Grinding - I.D. & O.D. • Grinding - Double Disc

Complete precision metal part manufacturing service, offering fineblanking, CNC milling & turning, lapping, EDM, honing and grinding. Grinding includes double disc, blanchard, surface, cylindrical, centerless and creepfeed.



Quality Certifications: MIL-45208 • MIL-STD-105-E
PILLER-AIMMCO     Booth # 422
Service Categories: Plastics - Injection Molding • Tooling - Plastic Injection Molding • Plastics - Insert Injection Molding • Plastics - Elastomeric Overmolding • Prototypes - Plastic

Our combination of Design, Engineering, Tool Manufacturing & Injection Molding expertise offers clients a one-stop-shop from design to finished product. With fully equipped tooling and molding operations, both operating 3-shifts, we deliver unparalleled speed in bringing new products from concept to production. We are ISO certified & engineering driven.

Quality Certifications: ISO 9001:2008
PLASMA RUGGEDIZED SOLUTIONS     Booth # 228
Service Categories: Coatings - Conformal • Coatings - Physical Vapor Deposition • Potting & Encapsulation • Electronic Encapsulations • Engineering & Technical Services

The premier service provider for Conformal Coating, Potting, Encapsulating, Plasma Etchback/Desmear, Laboratory Services & BGA underfill, ESS testing, and ultrasonic cleaning. Our Northern and Southern California divisions provide rapid response, technical excellence and a problem-solving, “can-do” staff of professionals. From concept to integration, we are your solutions resource. RoHS Compliant.

Quality Certifications: AS 9100 • ISO 9001-2000 • ITAR • IPC
PLASMA TECHNOLOGY INC.     Booth # 218
Service Categories: Coatings - Thermal Spray/Plasma/HVOF • Coatings - Physical Vapor Deposition • Coatings - Titanium Nitride • Grinding • Machining

A recognized leader in Thermal Coatings. Over 350 different coatings & thin film coatings. 2 locations: Torrance, CA & S. Windsor, CT. Setup with 24 fully operational spray booths. Supplier to OEM’s in all market segments. Modern metallurgical labs. Experienced engineers to take you from concept to finished part. Using the latest in advanced coating technologies.



Quality Certifications: NADCAP ACCREDITED • AS9100 • FAA REPAIR STATION • BOEING APPROVED
PLEIGER PLASTICS     Booth # 421
Service Categories: Polyurethane - Parts • Polyurethane - Rollers • Plastics - Thermoset Molding • Plastics - Sheet, Rod & Tube • Screen Printing

Specializing in full service stock shape & custom molded solid and foam polyurethane. Over 20 different Plei-Tech material compounds including options with general MSHA and FDA approvals. Only licensed U.S. custom molder of Vulkollan polyurethane.

POLYMER CONCEPTS TECHNOLOGIES INC.     Booth # 406
Service Categories: Gaskets, Seals, Washers & O-rings • Bearings • Plastics - CNC Machining • Engineering & Technical Services • Springs - Coil

An engineered seal company that designs and manufactures high-performance polymer seals for severe service applications. We are a well-known vendor to the space, commercial aviation, instrumentation, and industrial process industries. Also in surgical, medical, food and pharmaceutical sectors. Our technical support is the most responsive in the industry.

Quality Certifications: AS 9100 • ISO 9001:2008
POZZETTA PRODUCTS INC.     Booth # 427
Service Categories: Cases - Custom • Plastics - Injection Molding • Tooling - Plastic Injection Molding • Welding - Sonic • Rubber - Injection Molding

A full service thermoplastic injection molder specializing in the demanding needs of the medical, high technology, industrial and consumer product industries. Pozzetta continually strives to maintain their position as the injection molding leader in the Rocky Mountain area.

Quality Certifications: ISO 9001:2000
PRECISION RESOURCE     Booth # 219
Service Categories: Stampings - Fineblanked • Machining - CNC Milling & Turning • Lapping

The leading metal forming company through the fine blank process. 24 presses from 25-320 tons. Processes include lapping, deburr, cleaning & inspection. Complete in-house tooling design & fabrication. In-house CNC-machining capabilities. Metals include: stainless steels, copper, brass, aluminum & inconel.

Quality Certifications: TS 16949:2002
PREPRODUCTION PLASTICS INC.     Booth # 128
Service Categories: Plastics - Structural Foam • Plastics - Injection Molding • Plastics - Painting • Assemblies - Turnkey • Tooling - Plastic Injection Molding

Full service, turnkey custom structural foam injection molder with in-house mold design, moldmaking, molding, finishing and assembly all under one roof.

Quality Certifications: ISO 9001:2008 • UL CERTIFIED
PRODIGY SURFACE TECH     Booth # 408
Service Categories: Metal Finishing - Precious Metal Plating • Metal Finishing - Electroplating • Metal Finishing - Selective Plating • Metal Finishing - Electroless Nickel

Gold and Platinum Plating for Medical, Military, Aerospace and Semiconductor Equipment. Specializing in difficult to plate materials: Tungsten-Copper, Titanium, Molybdenum, Nitinol, Stainless Steel, Beryllium-Copper, Kovar, Nickel Alloys, Aluminum & Others. NADCAP, AS9100C & ISO 9001:2008 Certified.

Quality Certifications: NADCAP • AS 9100 • ISO 9001:2008 • ITAR
PROTOCAFE INC.     Booth # 207
Service Categories: Rapid Prototyping • Laser Cutting • Castings - Rubber Mold • CAD Design Services • Plastics - Low Volume

Full turnkey service bureau offering urethane casting/soft tooling, silicone parts, model finishing, laser cutting, 3D scanning, low volume production, CAD. We also have the finest resolution prototyping in the industry. Great for fine feature detail. DMLS, FDM, ABS, SLA, SLS, OBJET, translucent, flexible, high resolution, high temp, medical grade, Largest platform etc.

PROTOFAB INCORPORATED     Booth # 423
Service Categories: Machining - Production • Machining - Precision CNC • Machining - CNC Milling & Turning • Screw Machining - Swiss/CNC Swiss • Machining - Aluminum

A state-of-the-art machine shop. We perform production machining & prototyping in all metals & plastics for clients in test & measurement, electronics, Orthopedic, health-care & a variety of other industries. Our shop features the most modern CNC machine tools & CAM software. All Protofab work is guaranteed to customer satisfaction. California State Medical Device Manufacturer.

Quality Certifications: ISO 9001:2008
RAPID     Booth # 323
Service Categories: Prototypes - Rapid Sheet Metal • Prototypes - Machining • Assemblies - Cable • Machining - CNC Milling & Turning • Fabricating - Sheet Metal

We are a subtractive rapid prototyping manufacturer, specializing in quick-turn prototype and short-run production custom parts. RAPID’S core services include Rapid Sheet Metal - sheet metal fabrication services; Rapid Machining - CNC machining services; and Rapid Wire Cable - wire harnesses, cable assemblies, and electro-mechanical box build assemblies.



Quality Certifications: ISO 9001:2008 • ITAR REGISTERED
RAPID PRODUCT SOLUTIONS     Booth # 316
Service Categories: Rapid Prototyping • 3D Printing • Plastics - CNC Machining • Prototypes - Models • Prototypes - Rapid Sheet Metal

SLA, SLS, FDM Polyjet, CNC (plastic and metal), urethane castings, short run production, plastic injection, SLA QuickCast patterns for Investment Castings.

REDCO     Booth # 126
Service Categories: Rubber Rolls & Rollers • Rubber Molding • Gaskets, Seals, Washers & O-rings • Rubber - Transfer Molding • Die-Cutting

Proudly made in America since 1948. Your complete source for precision rollers, rubber molding, rubber extrusions, die cutting, foam fabricating & sub component assembly. We are your one stop source.



RESPONSIBLE METAL FAB INC.     Booth # 310
Service Categories: Fabricating - Sheet Metal • Assemblies - Mechanical • Metal Cabinets & Enclosures • Prototypes - Rapid Sheet Metal

One-stop source of precision sheet metal & machining for high-tech companies. Production & Prototype. Emphasis on design assistance. Superior finish work with in-house painting & silk screening.

Quality Certifications: ISO 9001:2008
REULAND     Booth # 337
Service Categories: Castings - Aluminum • Castings - Sand • Machining - Large Parts • Machining - Multi Axis

A full spectrum of services for any size casting including: design, pattern, finishing, anodizing, heat treat, inspection and complete CNC machining. We welcome small, medium or large prototype castings and short runs and will gladly work from your pattern, computer files, or existing castings.

Quality Certifications: ISO 9001:2008
RH USA     Booth # 425
Service Categories: Assemblies - Turnkey • Assemblies - Electromechanical • Prototypes - Electromechanical

An FDA registered site for medical device manufacturing. Our core manufacturing technologies are laser and optic assemblies. RH USA takes pride in being a full turn-key partner.

Quality Certifications: FDA REGISTERED • ISO 13485 • ISO 9001
ROBERTS AUTOMATIC PRODUCTS INC.     Booth # 142
Service Categories: Screw Machining - Multi Spindle • Machining - CNC Milling & Turning • Machining - Precision CNC • Machining - Multi Axis • Screw Machining - Swiss/CNC Swiss

Offering precision production machining, featuring twin-spindle multi-tasking CNC turnmill centers and multi axis CNC cells, swiss, & multiple spindle screw machines.



Quality Certifications: ISO 9001:2008 • ITAR REGISTERED
RONCELLI PLASTICS     Booth # 309
Service Categories: Plastics - CNC Machining • Assemblies - Mechanical • Rapid Prototyping • Machining - Precision CNC • 3D Printing

Since 1969 we have specialized in Precision Fabrication, CNC Machining, Die Cutting, Rapid Prototyping and Clean Room Assembly of Plastic and Non-Metallic components. Ask about our 5 axis milling capabilities.

Quality Certifications: AS 9100C • ISO 9001:2008 • ISO 13485:2003 • ITAR REGISTERED
S & H RUBBER     Booth # 341
Service Categories: Rubber Molding • Extrusions - Rubber • Rubber Stampings • Rubber To Metal Bonding • Urethanes - Molded/Extruded

We specialize in custom molded, extruded and stamped rubber parts. We serve aerospace, automotive and many other industries. We work with many types of rubber including; Silicone, EPDM, Neoprene, Buna-Nitrile and Viton. ISO 9001:2008 and AS9100:2009 as well as a direct supplier to Boeing, Parker and other OEM Aerospace Co's.

Quality Certifications: ISO 9001 • AS 9100 • BOEING • ITAR
SAPA EXTRUSION NORTH AMERICA     Booth # 136
Service Categories: Extrusions - Aluminum • Fabricating - Aluminum • Machining - CNC Milling & Turning

Extruded & fabricated aluminum, 23 North American locations with more than 65 presses of all sizes. 6000, 7000 series aluminum. Painting, anodizing, welding, bending & machining capabilities. Complete fabrication & finishing capabilities.

SCANDIC SPRINGS INC.     Booth # 324
Service Categories: Prototypes - Stamping • Stampings - Progressive Die • Stampings - Fourslide • Springs - Coil • Waterjet Cutting - Metal

A leading stamping & spring company specializing in quick-turn prototypes, custom metal stamping & CNC wireforming & laser and waterjet cutting.

Quality Certifications: ISO 9001:2015
SCHIPPERS & CREW INC.     Booth # 440
Service Categories: Assemblies - Printed Circuit Boards • Surface Mount Technology - Assembly • Assemblies - Turnkey • Cable & Wire Manufacturing • Inspection Services

We are an Electronics Manufacturing Services Company in Seattle, WA. We provide a full range of assembly services including SMT, Thru-hole, BGA, Cable, Test (ICT & JTAG) & X-Ray. Lead-free & Leaded. Our facility handles quantities from prototype up to volume production in both consigned & turnkey formats. Please contact us for a quote or tour!

Quality Certifications: ISO 9001 • ITAR • IPC-A-610
SEAL METHODS INC.     Booth # 336
Service Categories: Die-Cutting • Foam Conversion • Insulators • Assemblies - Turnkey • Extrusions - Rubber

Manufacturer gaskets, seals, tapes & precision die cuts. Major Raw Material Suppliers include: 3M, Dupont Elastomers, Rogers Corp., Saint Gobain, Gaska, Interface Solutions & many others. We convert your ideas into finished parts. We fabricate custom parts, prototyping available, water-jet cutting, slitting, laminating, die cutting, laser cutting, bonding.

Quality Certifications: ISO 9001 • TS 16949 • UL & FDA REGISTERED • AAMA
SEALING DEVICES INC.     Booth # 225
Service Categories: Gaskets, Seals, Washers & O-rings • Rubber - Injection Molding • Shielding - EMI/RFI • Die-Cutting • Adhesives

Manufacturer/fabricator of gaskets, O-rings, EMI shielding, adhesives, seals, custom molded rubber, and sponge parts. Also, compression, transfer and injection molding on-site. In-house tooling. Authorized Distributors for Parker Seal, Chomerics, Gore, 3M, Rogers, Garlock, Flexitallic & Loctite. Veteran Owned, Small Business & ITAR registered. seals@sealingdevices.com



Quality Certifications: AS 9100 REV C • ISO 9001:2008 • MIL-I-45208 • MIL STD 45662
SKS DIE CASTING & MACHINING INC.     Booth # 254
Service Categories: Castings - Die, Aluminum • Machining - Precision CNC • Tools, Dies & Fixtures • Castings - Die, Zinc

Aluminum, zinc & brass die casting & finishing company, supplying precision-machined components. The company has complete in-house CAD/CAM die design capabilities.

Quality Certifications: ISO 9002
SMART PRODUCTS     Booth # 104
Service Categories: Valves & Controls • Pumps & Reservoirs

Designs & manufactures an extensive family of check valves, pressure relief valves, pumps, & related components for advanced low pressure, low flow applications.



Quality Certifications: ISO 9001:2008
SNA ELECTRONICS INC.     Booth # 450
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Electronic • Assemblies - Mechanical • Wire & Cable Harnesses • Prototypes - Electronic

Electronics Manufacturing Services including: PCB Assembly & PCB Fabrication, System Integration, Cable Assembly, Plastics, Sheet Metal, Rework/RMA Support, Box, Labels, Accessory, Final Package Support & BGA Rework. Consignment/Turnkey/Combination.

Quality Certifications: ISO 9001:2008 • ISO 13485:2003 • AS 9100C:2009
SPECCOAT     Booth # 244
Service Categories: Coatings - Conformal • Coatings - Physical Vapor Deposition • Coatings - Polyurethane • Potting & Encapsulation • Electronic Encapsulations

Provides conformal coating and potting of printed circuit boards. Urethane, Acrylics, Silicone, Parylene, Epoxies and Nano coating. Industries include: Military, Medical, Aerospace, Space, and Industrial. Minor sub-assembly and soldering.

Quality Certifications: ISO 9001:2008 • AS 9100 REV D • ITAR • ANSI ESD S20.20-2007
SPIN PRODUCTS INC.     Booth # 415
Service Categories: Plastics - Rotational Molding • Assemblies • Cases - Custom • Molds & Moldmaking - Plastic • Tanks & Reservoirs

Custom Plastics Rotational Molder, with 24 hour production & full turnkey services. Part Sizes from 6” to 18’. We also have in-house Mold Design Services, Mold Fabrication, Molding & Drop Ship Services available. We are proud to manufacture the finest quality products with superior customer service to fit your needs. We serve many industries, including: Sporting Goods, Traffic Control, Automotive, Decor, Sanitation & Publishing. Visit our website & TAKE US FOR A SPIN!

SURFACE FINISHES     Booth # 105
Service Categories: Optical Polishing • Lapping • Machining - Single Point Diamond • Grinding - I.D. & O.D. • Honing

Precision Finishing, Fabrication and Refurbishment Services, Chemical Mechanical Polishing, Optical Quality Polishing, Precision Lapping, Single Point Diamond Machining, Precision Low Stress Grinding, Precision Honing - Large and Small Bore. See our website for typical results.



Quality Certifications: ITAR REGISTERED
SVTRONICS INC.     Booth # 304
Service Categories: Assemblies - Electronic • Electronics - New Product Development • Assemblies - Printed Circuit Boards • Prototypes - Electronic • Assemblies - Electromechanical

Our Product Design & Mfg. Services provide expert design and engineering covering electrical engineering, PCB layout, design verification & validation, compliance testing and Industrial design. Our state-of-the-art manufacturing facility also provides prototyping, mfg. services and works with the design team to ensure manufacturability of the product. Our Design Team has expertise in design for a variety of products including consumer electronics, medical devices, industrial and mobile computing products, communications interfaces, embedded controllers, automotive and industrial applications.

Quality Certifications: AS 9100 • ISO 13485 • ISO 14001 • ITAR
SWISSOMATION INC.     Booth # 213
Service Categories: Screw Machining - Swiss/CNC Swiss • Machining - Miniature Precision • Machining - Precision CNC • Plastics - Screw Machining • Screw Machining - Escomatics

Features a wide range of high quality production capabilities to meet your CNC machining needs on time & at competitive prices. Our experienced staff can set up & produce your parts on our Citizen Swiss CNC Screw Machines or our CNC Machining Centers. Our prototype department includes rapid prototyping capabilities to help you finalize your design. ISO 9001 Compliant. Also located at 254 Industrial Park Dr. Amherst, VA 24521 Phone: 434-946-7360.



Quality Certifications: SPC • PPAP's
TEMPCO MFG. CO. INC.     Booth # 241
Service Categories: Stampings - Metal • Fabricating - Sheet Metal • Assemblies - Mechanical • Welding & Weldments • Tools, Dies & Fixtures

With over 70 years of experience, Tempco produces precision metal stampings, precision sheet metal fabrications and mechanical assemblies for clients across numerous industries. Tempco offers a complete tool & die room to go along with secondary services to be your one stop shop for metal stampings and sheet metal fabrications.



Quality Certifications: AS9100C • ISO 9001:2008
THE CABLE CONNECTION     Booth # 426
Service Categories: Cables - Mechanical • Wire Rope Assemblies • Assemblies - Mechanical • Connectors & Couplings • Machining - CNC Milling & Turning

Specializes in "made to spec" small-diameter wire rope assemblies. State-of-the-art machining and assembly capabilities yield precise results, whether for simple lanyards, tight-tolerance military actuators with custom fittings, or something in between. All component fabrication and assembly is performed in the USA, most at our Carson City, NV plant.

Quality Certifications: ISO 9001:2008
THE OLANDER COMPANY     Booth # 449
Service Categories: Fasteners • Adhesives • Electronic Hardware • Engineering & Technical Services • Springs - Coil

The Olander Company, Inc. is a full line distributor of standard and metric fasteners, including commercial and specialty fasteners, precision hardware, electromechanical components, tools, adhesives, and wire management products. We have been proudly serving the Silicon Valley since 1962 and currently serve 63 different countries.

THERMO COOL     Booth # 349
Service Categories: Heat Sinks • Extrusions - Aluminum • Castings - Die, Aluminum • Stampings - Progressive Die • Forgings - Cold

We manufacture custom heat sinks. Aluminum extrusions, copper heat pipes, skived fins, snapped fins, bonded fins, cold forging and die casting. Secondary processes, including CNC machining, anodizing, bead blasting, interface materials, and screw/spring attachment hardware. Prototypes to full production Thermal engineering services: Design & CFD simulations.

Quality Certifications: ISO 9001:2008
TOP TOOL CO.     Booth # 503
Service Categories: Stampings - Micro-Miniature • Prototypes - Stamping • EDM - Wire • Tools, Dies & Fixtures • Stampings - Progressive Die

Specializes in creating tooling and complex precision components down to the µm level for world-class companies.

Quality Certifications: ISO 13485:2003 • ISO 9001:2008 • ITAR
TPI-ARCADE INC.     Booth # 239
Service Categories: Castings - Aluminum • Castings - Sand & Shell • Castings - Sand

The most advanced Aluminum V-Process casting facility in the US. Twice as accurate and smooth as common sand castings, .125" wall thickness, 0° draft and unlimited pattern life are a few advantages. We pride ourselves on speed to market with samples in 2-3 weeks. Let us be your prototype and production foundry.

Quality Certifications: AS9100C • ITAR REGISTERED
TSS TECHNOLOGIES     Booth # 339
Service Categories: Machining - Large Parts • Machining - Multi Axis • Machining - CNC Milling & Turning • Assemblies - Electromechanical • Assemblies - Turnkey

We machine large complex parts with critical tolerances. We are a Contract Manufacturer. We also provide custom automation solutions for most markets including Life Sciences, Medical, Consumer, Semiconductor, Solar, Aerospace and Industrial. We provide systems integration of simple to complex automation systems.

Quality Certifications: AS9100/ISO 9001:2000 • ISO 9001:2008 • ISO 13485:2003 • NADCAP
VAGA INDUSTRIES     Booth # 127
Service Categories: Photochemical Etching & Machining • Chemical Milling • Fabricating - Stainless Steel • Prototypes - Fabrication • Springs - Flat

We specialize in precision Photo Chemical Machining parts of all types of metals, prototype & production. Thicknesses range from .0002" to .065". In-house CAD. Forming, heat treating & plating. Woman owned, AS9100C and ISO 9001:2008 registered. Contact us at sales@vaga.com.

Quality Certifications: AS 9100C • ISO 9001 • MIL-I-45208
VALENCE SURFACE TECHNOLOGIES     Booth # 334
Service Categories: Metal Finishing - Precious Metal Plating • Metal Finishing - Electroless Nickel • Metal Finishing - Anodizing • Testing - Non-Destructive • Metal Finishing - Painting

We are the largest independent metal processing company serving highly technical industries including semiconductor, electronics, medical device and aerospace. With 10 Nadcap facilities offering vast capabilities and approvals for mission-critical parts, Valence is known for its custom-engineered solutions.

Quality Certifications: ISO 9001:2008 • EN/JISQ/AS 9100:2004 • NADCAP SAE AS7003 • ITAR REGISTERED
VECO USA     Booth # 208
Service Categories: Electroforming • Chemical Milling • Photochemical Etching & Machining • Shielding - EMI/RFI • Optical Components

Pushing the boundaries of Micro-Precision Parts since 1934, we are your one source for all your precision Metal Parts & Component needs. Using Veco's core technologies of Photo Electroforming and/or Photo Etching, along with our precision Micro Laser capabilities, we are committed to helping you create dependable products. Transforming ideas into reality!



Quality Certifications: ISO 9001:2000 • ISO 14001:1996 • TS 16949 • OHSAS 18001
WEPCO PLASTICS INC.     Booth # 102
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Prototypes - Plastic • Plastics - Elastomeric Overmolding • Plastics - Insert Injection Molding

We are a family owned full-service mold making and plastic injection molding company offering American made parts. We specialize in rapid prototype onsite tooling and short to medium run plastic injection molding with 4 axis machining, fixturing, and secondaries.



WEST VALLEY PRECISION INC.     Booth # 326
Service Categories: Machining - CNC Milling & Turning • Machining - Production • Prototypes - Machining

Facility with large capacity full 5 axis machining, multi pallet horizontal milling, CNC lathes & Swiss Screw machines. Providing prototype through production machining for all industries.

WORLD-WIDE ADVANTAGE     Booth # 328
Service Categories: Wire & Cable Harnesses • Electronics - New Product Development • Castings - Investment • Plastics - Injection Molding • Electronics - New Product Development

We bring manufacturing under one umbrella. With US quality management, QC, logistics & engineering, we put the world's manufacturing capabilities at your doorstep. Electronic Controls - Castings/Forgings - Wire Harnesses - Metal Fabrication - Plastics - Wire Forming.

Quality Certifications: ISO 9001:2008
WRIGHT ENGINEERED PLASTICS INC.     Booth # 321
Service Categories: Plastics - Injection Molding • Plastics - Insert Injection Molding • Plastics - Elastomeric Overmolding • Plastics - In Mold Labeling & Decorating • Assemblies - Turnkey

San Francisco Bay Area provider of injection molding & assembly services, including clean environment rooms for molding & assembly, insert or overmolding, decorating and final packaging. First Green Certified manufacturer in Northern California. In-house tool. Outstanding DFM support. All parts made in Santa Rosa, CA.

Quality Certifications: ISO 9001:2008 • ISO 13485:2012 • FDA REGISTERED • ITAR REGISTERED
WUNDER-MOLD INC.     Booth # 519
Service Categories: Ceramics - Injection Molding • Grinding - Ceramics • Machining - Ceramics • Plastics - Injection Molding

For over 20 years, we have led the industry in the production of ceramic injection molded products. We specialize in the manufacture of state-of-the-art molded ceramic components. It is Wunder-Mold's mission through the exprtise of highly trained staff, ISO9001:2008 registration, and excellent service to provide customers with a product that meets their requirements.

Quality Certifications: ISO 9001:2008 • NSF51
XIMEDICAS     Booth # 521
Service Categories: CAD Design Services • Prototypes - Machining • Consulting - Manufacturing • Instrumentation & Controls • Industrial Design Services

Accelerating product development and manufacturing. Accel Biotech offers custom design, development and contract manufacturing services, specializing in IVD, molecular diagnostic and life science. For full system development, Accel progresses from conceptualization to prototyping and alpha or clinical units.

Quality Certifications: ISO 13485:2003
Y. C. CABLE USA INC.     Booth # 354
Service Categories: Wire & Cable Harnesses • Plastics - Insert Injection Molding • Cable & Wire Manufacturing • Assemblies - Electronic

An industry leader in the cable assembly market. We have four U.S. locations and three international locations to provide service from. Also UL and CSA certified. With our diverse manufacturing capabilities, our cables can be found in industrial, computer, telecommunications, consumer, medical and RF markets. TS16949; FDA Registered. Also featuring SMD Inc.

Quality Certifications: ISO 9001:2000 • IPC/WHMA-A-620 • UL CERTIFIED • RoHS


© 2017 The Job Shop Company • 16 Waterbury Road, Prospect, CT 06712 • (800) 225-4535