Texas Design-2-Part Show
February 22 & 23, 2017
Gaylord Texan Convention Center • Grapevine, TX



Search by Category

or

Search by Keywords


  Reset Search  



0 Exhibitors to Meet

Exhibitor List


Listed below are the current exhibitors and service categories of companies in the show.
This page is also an interactive tool for you to use when planning your personal visit.

[ 164 ] companies match your search.
FEATURED EXHIBITORS listed first alphabetically
ADRON TOOL CORP.     Booth # 116
Service Categories: EDM • EDM - Wire • EDM - Sinker • EDM - Small Hole Drilling • Machining - Production

Wire EDM specialists with over 50 CNC mach., CNC (sinker) std. EDM; largest capacity, 40"x32"x18", workpiece wt. 10,000 lbs., 27-1/2" thick; metal parts rapid prototyping svc. and prod. runs of complex, contoured shapes in tough to mach. or exotic mtl.; CNC production machining, coord. measuring sys., SPC, OGP optical non-contact measuring.

www.adron.com

Quality Certifications: ISO 9001:2008 • AS 9100 • NADCAP AS7116
ADVANCED GRAPHICS SYSTEMS INC. (AGS)     Booth # 525
Service Categories: 3D Printing • Metal Finishing - Chrome Plating • Machining - CNC Milling & Turning • Screw Machining - Swiss/CNC Swiss • Prototypes - Machining

An Innovative Aerospace supplier since 1955, we have invested in the future by adding 3D Direct metal printing to our extensive list of capabilities to provide the widest range of machining in the DFW metroplex. Our experienced 40 man job shop, using 60+ machines to handle all your production needs from multi-axis CNC mill/turn & grinding, ID/OD & surface grinding up to 84", gun drilling, swiss machining, & in-house chrome plating. This is backed up by a 10 man staff to oversee design, prototyping and quality control making up our state-of-the-art AGS, AAA & SWIS mfg. family.

www.aaaswis.com

Quality Certifications: DOD REGISTERED • MIL-Q-9858A • AMS-QQ-C-320
ALL PRODUCTS MFG. & SUPPLY INC.     Booth # 321
Service Categories: Die-Cutting • Die-Cutting - Felt, Cork & Rubber • Gaskets, Seals, Washers & O-rings • Insulators • Rubber Stampings

We've been serving the custom fabrication and die-cutting needs of businesses like yours since 1971 and are known for our quality, fast turnaround, customer service and materials expertise. Our state-of-the-art facility, modern equipment, and lean manufacturing techniques enable us to provide a 10 piece prototype or a 1,000,000 piece production run. Veteran Owned - Small Business. Send RFQs to sales@apgasket.com.

www.apgasket.com

Quality Certifications: AS 9100 REV C • ISO 9100:2001
ALUMA GRAPHICS     Booth # 108
Service Categories: Labels, Tapes & Decals • Screen Printing • Nameplates, Dials & Panels

Leading manufacturer of labels, decals, nameplates, domed labels and overlays. We do METALPHOTO, digitally print, screen print, pad print, laser engrave, die-cut & waterjet cut.

www.alumagraphics.com

Quality Certifications: ISO 9001:2008 • AS9100C
AMERICAN METALCRAFT INDUSTRIES     Booth # 428
Service Categories: Fabricating - Stainless Steel • Fabricating - Steel • Fabricating - Aluminum • Metal Finishing - Polishing & Plating • Waterjet Cutting - Metal

A custom metal fabrication company located in Union Grove, Wisconsin – conveniently located midway between Chicago and Milwaukee. We take pride in offering our customers a superior quality product for a competitive price. Customer service and satisfaction is a high priority at American Metalcraft Industries.

www.ametalcraft.com

Quality Certifications: AWSD1.1 • AWSD1.2
AMERICAN PLASTIC MOLDING CORP.     Booth # 102
Service Categories: Plastics - Injection Molding • Assemblies • Tooling - Plastic Injection Molding • Prototypes - Plastic • Plastics - Insert Injection Molding

APM: Adept-Productive-Motivated. Contract mfg., project mgmt., custom injection molding, UL approved assembly, finished packaging, drop-ship, plastic design seminars, design for manufacturing seminars, skilled engineering, dedicated customer service, domestic mfg., in-house tool shop, design enhancement, detailed quotes, mold flow analysis, and feasibility quotes.

www.apmc.com

Quality Certifications: ISO 9001:2008 • ISO 14001
AMS - ACCURATE METAL     Booth # 230
Service Categories: Fabricating - Sheet Metal • Powder Coating • Electronic Enclosures • Welding & Weldments • Welding - TIG Aluminum

Precision sheet metal fabrication / in-house powder coating / certified welding commercial to structural, Fort Worth, TX. Enclosures, electronic assemblies, weldments, panels, guards, gaming, cabinets, display and many other industries. Secondary operations include electronic integration and assemblies.

www.accuratemetalstamping.com

Quality Certifications: AS 9100D, ISO 9001:2015 • WELDING • AWS D15.1/D15.1M: 2012-11.11 • AWS D15.1/D15.1M: 2012 11.12
APPLE RUBBER PRODUCTS     Booth # 240
Service Categories: Gaskets, Seals, Washers & O-rings • Rubber Molding • Rubber To Metal Bonding • Silicone / Rubber - Liquid Injection Molding • Prototypes - Rubber

Manufacturer of elastomeric parts. O-Rings; MicrOrings to MacrOrings, AS568 & ISO 3601 (search inventory from our Website). We design & manufacture custom, rubber bonded to plastic, metal & filter materials, and medical rubber parts. Our services include engineering, design assistance & QC testing & reporting, from prototype to Production. Class 7 (10,000) clean room.

www.applerubber.com

Quality Certifications: ISO 9001 • AS 9100
ASH INDUSTRIES     Booth # 114
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Plastics - Insert Injection Molding • Plastics - Hot Stamping & Screening • Prototypes - Plastic

Engineered for You. In-House MIM, Thermoplastic, and Silicone Injection & Roto Molding & Tooling as well as cast epoxy components & 7-Axis Swiss Lathe production. Molding includes custom inserts & over-molding, two shot molding. Component assembly, secondary processing & decorating, utilizing the latest in CNC, EDM & Modeling technology.

www.ashindustries.com

Quality Certifications: ISO 9001 • ISO 7 CLASS 10K CLEAN ROOM
BMI PRECISION     Booth # 536
Service Categories: Machining • EDM • Heat Treating • Tooling

With more than 30 years of manufacturing experience, BMI Precision delivers a wide range of parts and products to customers all over the globe. From engineered-to-order tooling to high-volume quantities of machine parts, you can count on our expertise, advanced processing capabilities and reliable customer service.

www.bmiprecision.com

Quality Certifications: ISO 9001
BOEDEKER PLASTICS INC.     Booth # 226
Service Categories: Plastics - CNC Machining • Plastics - Screw Machining • Plastics - Sheet, Rod & Tube • Prototypes - Plastic • Assemblies

Since 1984 we have focused on customer service and technical support. We have grown to offer the most diverse, largest single-location inventory of engineering plastic & composite sheet, rod and tube, with cut-to-size and same day shipments. Our inventory is complemented by a precision machine shop with 76 CNC machines dedicated to machining plastic and composite parts.

www.boedeker.com

Quality Certifications: ISO 9001:2008 • ISO 13485:2003
CENTRAL TUBE AND BAR     Booth # 508
Service Categories: Laser Cutting • Saw Cutting • Bending - Custom • Lasers

We are a value-added service center that specializes in 3D tube laser processing. We also provide sawing, tube bending and flat laser service. Additionally we provide materials and will do stock to release programs, JIT and Kanban. We also have design capabilities and will work closely with your engineering staff to design parts for cost reduction and manufacturing efficiency.

www.centraltubeandbar.com

Quality Certifications: ISO 9001:2008
COMMERCIAL METALS     Booth # 524
Service Categories: Recycling - All Metals • Recycling - Industrial

CMC Recycling has served the North Texas market since Commercial Metal Company’s inception in 1915. We provide metal recycling solutions to our diverse client base, each with a unique set of requirements and demands, and create long-term sustainable value for their businesses.

www.cmcrecyclingdfw.com

CONELEC     Booth # 531
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Electronic • Prototypes - Electronic • Assemblies - Turnkey • Mechanical & Electronic Design

A high-tech printed circuit board and electronic systems assembly service provider, Conelec is dedicated to simplifying manufacturing for our customers. Our attention to detail, process development and control, ability to problem solve, and superior customer service allow us to become an extension of our customers' operations to deliver world-class turnkey electronics.

www.conelec.net

Quality Certifications: AS 9100 REGISTERED • ISO 9001 & ISO 13485 • ITAR
CONNOR MFG. SERVICES INC.     Booth # 333
Service Categories: Fabricating - Sheet Metal • Stampings - Progressive Die • Stampings - Fourslide • Assemblies - Turnkey • Laser Cutting

A World Class Leader in Precision Metal Stamping & Fabrication, Wire Forms, Springs, Integrated Assemblies, Tooling, Weldments and More. Preferred supplier to many in Aerospace, Class 8 Trucking, Consumer Electronics. Headquartered in California’s Silicon Valley, with wholly-owned manufacturing facilities globally to serve your needs.

www.connorms.com

Quality Certifications: AS 9100 REV C • ISO/TS 16949 • ISO 9001:2008 • ITAR REGISTERED
CR METAL PRODUCTS     Booth # 218
Service Categories: Fabricating - Sheet Metal • Powder Coating • Laser Cutting • Welding - Robotic • Screen Printing

A custom metal fabrication facility/contract manufacturer specializing in precision sheet metal fabrication, powder coated finishes, & silkscreening.

www.crmetal.com

Quality Certifications: ISO 9001:2008
DAYTON ROGERS MFG. CO.     Booth # 311
Service Categories: Stampings - Metal • Fabricating - Sheet Metal • Assemblies - Stamped • Stampings - Short Run • Rapid Prototyping

"We provide metal forming solutions to industry." Modular tooling/progressive metal stampings, metal fabrication, welded assemblies, prototypes, drawn shapes, complete tool & die facility. All secondary operations. Seven locations to serve you.

www.daytonrogers.com

Quality Certifications: ISO 9001:2008 • AS 9100 • ITAR
DB ROBERTS     Booth # 103
Service Categories: Fasteners • Electronic Hardware • Assembly Hardware • Levers, Knobs & Handles • Masking

Since our inception, we have been focused on providing solutions for fastener applications in Sheet Metal Fabrication, Metalworking, and Industrial Electronics. Our "Superior Customer Service" and "Commitment to Excellence" have proven to be winning formulas fueling innovation and rapid growth for 35 years.

www.dbroberts.com

Quality Certifications: ISO 9001:2008 • AS 9120A
DESIGN-2-PART MEDIA     Booth # 000
Service Categories: Publications

Published since 1984, Design-2-Part Magazine is one of the country's oldest publications specifically devoted to showcasing manufacturing companies who specialize in helping OEM's take their product from design to part.

www.reachengineers.com

DYNAMIC STAMPINGS INC.     Booth # 100
Service Categories: Stampings - Short Run • Stampings - Metal • Fabricating - Sheet Metal • Fabricating - Stainless Steel • Laser Cutting

One-Stop-Shop for Low Volume metal stampings - (100 - 10,000 pieces). Hard tooled die sets start at just $185.00. One-Time tool charge for the Life-Of-The-Part. RFQ's quoted complete to print within 48 hours. All metals .010" to .250" thick.

www.dynamicstampings.com

DYSINGER INC.     Booth # 306
Service Categories: Machining - Precision CNC • Grinding - Precision • Machining - Large Parts • Assemblies - Mechanical • EDM - Wire

Whether it is precision machining services, sub-assembly support, or high value added process engineering solutions, we have the knowledge and the tools to turn your production problems into profitable opportunities. We strive to develop solid customer relationships based upon high quality standards, reliable performance to commitments and attentive service.

www.dysinger.com

Quality Certifications: ISO 9001:2008 • AS 9100:2009 REV C • ITAR
FIMEX SA DE CV     Booth # 529
Service Categories: Castings - Steel • Castings - Brass • Machining - Precision CNC • Machining - Production • Metal Finishing - Polishing & Plating

Provides solutions to your machined castings needs. We specialize in high complexity products in low to medium batches. Our broad variety of materials and processes make us a unique supplier. From Stainless, carbon steels, refractory steels, bronze and brass alloys, non leaded alloys. Made on different process: Sand Castings, permanent mold & lost foam.

www.fimex.com.mx/es

Quality Certifications: ISO 9001:2015 CERTIFIED • PPAP LEVEL 1,2,3,4,5 • HEAT TREAT / NDT
FOX VALLEY SPRING LLC     Booth # 104
Service Categories: Springs - Coil • Springs - Flat • Wire Forming & Fabricating • Stampings - Fourslide • Stampings - Short Run

Manufacturer of custom springs, wire forms and metal forms. We utilize SPC systems, CNC coilers and experienced craftsmen to assure consistent quality. Design assistance and rush orders are welcome. Wisconsin Grand Manufacturer of the Year. We Quality Certify each process & provide a total Value-added supplier package.

www.foxvalleyspring.com

Quality Certifications: ISO 9001:2008 • ITAR CERTIFIED
GOENGINEER     Booth # 305
Service Categories: CAD/CAM Software • Rapid Prototyping • Finite Element Analysis - FEA • CAD Design Services • 3D Printing

GoEngineer delivers software, technology and expertise that enables companies to unlock design innovation and deliver better products faster. With more than 30 years experience and thousands of customers in high tech, medical, machine design, energy and other industries, GoEngineer provides best-in-class design solutions from SOLIDWORKS, Stratasys, Objet, CAMWorks & Product Lifecycle Management (PLM).

www.goengineer.com

HARDWARE SPECIALTY CO. INC.     Booth # 202
Service Categories: Fasteners • Electronic Hardware • Adhesives • Assemblies - Electrical • Assembly Hardware

Our SAE AS9120 Registered Quality Management System and full service Quality Assurance facilities coupled with many years of technical sales experience and deep product line inventory ensure our commitment to total customer satisfaction. Together these make Hardware Specialty an unbeatable source for all your fastener and electronic component requirements.

www.hardwarespecialty.com

Quality Certifications: SAE AS9120 • ISO 9001:2008 • ISO 14001 • MIL STD 45662A
I C A CORPORATION     Booth # 203
Service Categories: Machining - Precision CNC • Electronic Enclosures • Fabricating - Sheet Metal • Assemblies - Mechanical • 3D Printing

Employee owned company providing build-to-print metal component parts & assemblies to the defense, analytical instrumentation & transportation industries. Wide range of capabilities - close tolerance CNC milling & turning; 5-axis machining; optomechanical component machining; sheet metal fabrication; custom electronic enclosures; welding; mechanical assembly; 3D printing.

www.icacorp.com

Quality Certifications: ISO 9001:2008 • ITAR REGISTERED
J & R MACHINE INC.     Booth # 430
Service Categories: Machining - CNC Milling & Turning • Machining - Production • Machining - Precision CNC • Machining - Conventional CNC • Machining - Castings

We are a knowledge based contract machine shop that solves complex machined part problems through value-added manufacturing, engineering, machining, quality, and exceptional customer service. Additional Services; machining of stainless steel and exotic materials, thread rolling, robotic welding, mechanical assemblies, die-cast aluminum, and aluminum extrusions.

www.jrmachine.com

Quality Certifications: ISO 9001:2008
M&M PRECISION PRODUCTS     Booth # 439
Service Categories: Fabricating - Sheet Metal • Welding - MIG • Laser Cutting • Welding - TIG Aluminum • Electronic Enclosures

We have many years of experience providing precision custom sheet metal fabrications and contract manufacturing services to the transportation, electronic, communication, commercial fixture, food service and construction industries.

www.mmprecisionproducts.com

MAKETIME     Booth # 409
Service Categories: Machining • Machining - CNC Milling & Turning • Machining - Production • Laser Cutting • Internet Outsourcing

We are a tech company that simplifies the operational processes of machining production. MakeTime does this by collecting unused machine time from qualified shops across America, and placing each order with the right shop for the job. Our software gives transparency to manufacturing operations, overcomes capacity shortages, and standardizes pricing.

www.maketime.io

MCS PRODUCTS     Booth # 535
Service Categories: Machining - Conventional CNC • Laser Cutting • Prototypes - Plastic • Molds & Moldmaking - Plastic • Wire Forming & Fabricating

With more than 35 years of experience creating innovative design solutions, we feel the simplest answers are sometimes the cheapest and best. MCS Products will work around the clock to get our customers out of a tight spot. We have never delivered parts late. Contract Manufacturing using various processes: Conventional machining, Computerized Machining (CNC), Assembly work, Clicker die punching (cookie cutter style), Punch Press parts, Hand forming of springs, Clips and wire forms, Welding, fitting and assembly.

www.mcsproducts.net

NAPPCO FASTENER CO./AVK     Booth # 438
Service Categories: Fasteners • Electronic Hardware • Labels, Tapes & Decals • Gaskets, Seals, Washers & O-rings • Wire & Cable Harnesses

Founded in Houston in 1969. ISO 9001:2008. Master Distributor for many of the lines we represent. We maintain fasteners in various grades & types of steel, stainless, bronze, monel, brass & nylon. We offer a wide variety of value added solutions such as: VMI-Vendor Managed Inventory, Kitting, JIT & supply chain management.

www.nappco.com

Quality Certifications: ISO 9001:2008
NORTHWEST SWISS-MATIC LLC     Booth # 107
Service Categories: Screw Machining • Screw Machining - Swiss/CNC Swiss • Screw Machining - Escomatics • Assemblies - Mechanical • Grinding - Centerless

Precision screw machine parts up to 2 5/8" diameter. All materials. Complete secondary operations including CNC chuckers, grinder, honing, thread rolling, milling, drilling and deburring. ITAR Certified.

www.nwswissmatic.com

Quality Certifications: ISO 9001:2008 / AS9100-C • MIL-I-45208 • MIL-I-45662 • MIL-Q-9858
NPI TECHNOLOGIES     Booth # 515
Service Categories: Prototypes - Electronic • Cable & Wire Manufacturing • Assemblies - Electronic • Assemblies - Printed Circuit Boards • Rapid Prototyping

A highly competitive electronics contract manufacturer, NPI Technologies specializes in quick turn high mix/low to medium volume PCB assembly. Our customers always come first and communication is key. We deliver when we say we will deliver. We also offer cable assembly and final box builds.

www.npitechnologies.com

Quality Certifications: ISO 9001 • IPC 610 • ITAR REGISTERED • MINORITY BUSINESS ENTERPRISE
PERIN MACHINING COMPANY     Booth # 517
Service Categories: Machining - Production • Screw Machining - Multi Spindle • Machining - Rotary Transfer • Machining - CNC Milling & Turning • Machining - Multi Axis

Founded in 1980, Perin Machining Company specializes in custom screw machining, multi-spindle CNC machining, Hydromat rotary transfer machining, and CNC turning. Perin Machining Company is an ISO 9001 certified company producing component parts for the agricultural, appliance, automotive, faucet, and hydraulic industries. PPAP Compliant.

www.perinmachining.com

Quality Certifications: ISO 9001:2015 CERTIFIED • LEAN 5S CONCEPT CERTIFIED
PROGRESSIVE STAMPING & FABRICATION     Booth # 523
Service Categories: Stampings - Metal • Fabricating - Sheet Metal • Machining - CNC Milling & Turning • Tools, Dies & Fixtures • Assemblies - Mechanical

Our mission is to collaborate with you to solve production issues, including part design and tooling, provide consistent quality per your specifications, and resolve delivery and inventory challenges so you may be more successful. By bringing your expertise and ours together a new higher standard can be achieved.

www.psi-okc.com

Quality Certifications: ISO 9000:2008 • LRQA
SMALLEY     Booth # 117
Service Categories: Snap Rings & Retaining Rings • Springs - Coil • Springs - Wave • Springs - Flat • Fasteners

We are the exclusive manufacturer of the industry-leading Spirolox® Retaining Rings, an innovative design that features a no gap, 360° retaining surface without protruding ears to interfere with mating components. We are also the originator of Crest to Crest® Wave Springs which save up to 50% of space compared to conventional coil springs.

www.smalley.com

Quality Certifications: ISO 9001 & ISO 13485 • ISO/TS 16949 • AS 9100 • ISO 14001
SOUTHWEST STEEL CASTINGS/CORBITT MFG.     Booth # 435
Service Categories: Castings - Steel • Castings - Stainless Steel • Castings - Aluminum • Heat Treating • Machining

Sand and Semi-Permanent Mold Castings and Machining; Sand Casting Alloys - Carbon Steel, Low Alloy Steel and Stainless Steel Semi-Permanent Mold Alloys - Aluminum.

www.swscc.com

Quality Certifications: ISO 9001:2008 • PED • ASNT LEVEL II/LEVEL III
STRATASYS DIRECT MANUFACTURING     Booth # 106
Service Categories: 3D Printing • Rapid Prototyping • Prototypes - Plastic • Prototypes - Models • Electronic Enclosures

We offer proven 3D printing and custom manufacturing solutions that allow organizations to innovate rapidly and move to market quickly. Services include additive manufacturing, rapid prototyping, urethane casting, CNC machining, tooling, injection molding and professional finishing. ISO 9001 and AS9100 certified.

www.stratasysdirect.com

Quality Certifications: ISO 9001 • AS 9100
TAICA NORTH AMERICA CORP.     Booth # 426
Service Categories: Silicone / Rubber - Liquid Injection Molding • Rubber Molding • Rubber To Metal Bonding • Bushings • Heat Sinks

Manufacturer of Alpha-GEL brand silicone parts & components for many applications: Anti-vibration parts, Shock-absorbing materials, Thermally Conductive Pads & Paste. Alpha-GEL is soft, highly-durable, environmentally-friendly silicone that can be used over a wide temperature range (-40 C to +200 C). Visit us at www.taica-na.com

www.taica.co.jp/gel-english

Quality Certifications: ISO 9001 • RoHS • UL 746 D • JIS/DTS
TECH-ETCH INC.     Booth # 238
Service Categories: Chemical Milling • Photochemical Etching & Machining • Shielding - EMI/RFI • Circuits - Flexible • Assemblies - Circuits

Photoetching services featuring specialty materials: tungsten, titanium, polyimide, elgiloy, molybdenum & nitinol. Flexible circuits manufacturer featuring fine line technology, microvias & SMT Assembly. EMI/RFI shielding products manufacturer specializing in beryllium copper spring fingers, conductive fabric gaskets & knitted wire mesh.

www.tech-etch.com

Quality Certifications: ISO 9001:2008 • AS 9100 REV C
TRIANGLE PRECISION INDUSTRIES INC.     Booth # 112
Service Categories: Prototypes - Machining • Prototypes - Fabrication • Machining - CNC Milling & Turning • EDM • Welding & Weldments

Engineering prototypes & low volume production for precision machined parts, machined & formed combinations & precision fabrications, state-of-the-art laser cutting & water jet cutting, laser marking, conventional & 5 Axis CNC machining, precision CNC turning & Swiss turning, wire & sinker EDM, press brake forming, welding. Coordinate measuring machines for inspection. Contact Harold A. Brown.

www.triangleprecision.com

Quality Certifications: ISO 9001:2015 • AS 9100D
UNITED WESTERN ENTERPRISES INC.     Booth # 313
Service Categories: Photochemical Etching & Machining • Shielding - EMI/RFI • Springs - Flat • Chemical Milling

Photochemical etching of thin metal parts from aluminum, copper, beryllium copper, nickel, nickel alloys & stainless steel alloys in thickness ranging from 0.0003" to 0.063". In addition to etching, we provide in-house forming and laser welding. We will take responsibility for heat treating, plating and other value added services. Etching applications are shims, shielding, flat springs, lead frames, fine screens & other thin metal parts.

www.uweinc.com

Quality Certifications: AS9100C / ISO 9001:2008 • ITAR REGISTERED
WORLDWIDE FOAM LTD.     Booth # 521
Service Categories: Extrusions - Plastic Sheet

We were founded with a relentless focus on providing XLPE customers with the product they need, when they need it. Short lead times on buns and sheets as well as the widest range of sizes and densities available. Worldwide Foam, Ltd. ensures that our customers never have to worry about having the product they need.

www.worldwidefoam.com

Quality Certifications: ISO 9001:2008
3D MACHINE INC.     Booth # 239
Service Categories: Machining - CNC Milling & Turning • Waterjet Cutting - Metal • Screw Machining - Swiss/CNC Swiss • Assemblies • Laser Machining

A complete contract manufacturer offering CNC Machining, Waterjet, Assembly, Swiss Turning and Laser, and Supply Chain Management solutions. Focused on Lean Six Sigma continuous improvement methods to provide the lowest cost to our customers.



Quality Certifications: ISO 9001:2008
A. T. WALL CO.     Booth # 318
Service Categories: Tubing - Cold Drawn • Laser Cutting • Metal Injection Molding • Tube Bending & Fabricating • Fabricating - Aluminum

Providing machining, MIM & tubing to the medical, automotive, frequency control, telecommunication, and defense markets. Offering a broad range of materials such as copper, aluminum, nickel, kovar, invar, BeCu, brass, bronze, niobium & tantalum up to 6" in diameter.



Quality Certifications: ISO 9001:2008
A.E. MACHINE WORKS INC.     Booth # 401
Service Categories: Machining - CNC Milling & Turning • Machining - Precision CNC • Machining - Exotic Materials • Machining - Aluminum • Machining - Stainless Steel

Specializing in precision machining of component parts in various industries. We process all materials ranging from aluminum to high nickel alloys. Established in 1966, we've maintained a sterling reputation of exceptional quality with long lasting customer relationships.

Quality Certifications: AS 9100 • ISO 9001
ACC INC.     Booth # 418
Service Categories: Laser Cutting • Fabricating - Sheet Metal • Welding - MIG • Powder Coating • Waterjet Cutting - Metal

A sheet metal fabrication shop offering laser cutting, forming, welding (MIG & TIG), and powder coating. We also have access to waterjet and tube laser cutting services.

Quality Certifications: ISO 9001:2008
AFCO INDUSTRIES     Booth # 411
Service Categories: Extrusions - Aluminum • Fabricating - Aluminum Extrusions • Metal Finishing - Painting • Metal Finishing - Anodizing • Assemblies - Turnkey

Through it's aluminum division, AFCO supplies aluminum extrusions and fabricated components to some of the most recognized names in manufacturing and solar products. A vertically integrated producer, AFCO enjoys a reputation for innovative design and utilizes the latest technology for precision fabrication of aluminum parts. AFCO is also an employee owned company.

Quality Certifications: AAMA • ASTM B221 • MIL-A-8625
ALINABAL INC.     Booth # 340
Service Categories: Stampings - Metal • Assemblies - Electromechanical • Stampings - High Volume • Stampings - Shims • Stampings - Short Run

Providing an extensive span of manufacturing and assemblies capabilities to a wide range of OEM markets including medical, commercial, aerospace, industrial and automotive. Our products range from stampings, shims, laminations and assemblies just to name a few.

Quality Certifications: AS 9100 • ISO 9001:2008 • ISO-TS16969
ALLEGIS CORP.     Booth # 327
Service Categories: Fasteners • Hinges • Industrial Design Services • Adhesives

One of North America's leading providers of industrial, electrical & transportation access hardware solutions. With eleven regional distribution centers, we provide innovative product & supply chain services for OEM's across North America.

Quality Certifications: ISO 9001:2008
AM COMPASS GROUP INC.     Booth # 421
Service Categories: Machining • Molds & Moldmaking - Plastic • Metal Injection Molding • EDM • Stampings - Metal

Offering one-stop shopping options to assist your mechanical needs from prototype to volume production with combination of CNC machining, injection molding, metal injection molding (MIM), and die casting. We have experienced engineers and skilled mechanics to produce high quality parts promptly at aggressive prices. We will be happy to support you!

Quality Certifications: ISO 9001:2000 • ISO 14001
AMERICAN FLEXIBLE PRODUCTS INC.     Booth # 315
Service Categories: Gaskets, Seals, Washers & O-rings • Die-Cutting - Felt, Cork & Rubber • Fabricating - Foil, Films & Foams • Die-Cutting • Waterjet Cutting - Non-Metal

Employee Owned, Custom Fabricator of Flexible materials: foam, rubber, sponge, thin gauge plastics, EMI/RFI, and pressure sensitive adhesives. Services: rotary die cutting/flatbed die cutting, kiss cutting, laser cutting, water jet cutting, slit to width, laminating films, fabric & PSA. Rogers Corporation Preferred Converter. 3M Select Converter.



Quality Certifications: ISO 9001:2015 • SPC
AMERICAN PRODUCTS INC.     Booth # 304
Service Categories: Electronics - New Product Development • Assemblies - Electronic • Wire & Cable Harnesses • Assemblies - Printed Circuit Boards • Embedded Devices

Design and manufacture industrial electronic control systems including printed circuit board assemblies and wire harnesses.



Quality Certifications: ISO 9001-2000
AMERITEX MACHINE & FABRICATION     Booth # 540
Service Categories: Laser Cutting • Fabricating - Sheet Metal • Engineering & Technical Services • Machining - Precision CNC • Coatings - Electrostatic Powder

We set the standard in custom metal fabrication and machining; providing the highest quality laser cutting and fabricated metal products, at competitive prices, and unsurpassed customer service. Including: Laser cutting-with 5 production lasers, CNC Punching, NC Pressbrake Forming, CNC Machining, Hardware Insertion, and Powder Coating.

Quality Certifications: UL508a CERTIFIED • UL TYPE 1 & 3R ENCLOSURES • UL APPROVED / UL CERTIFIED • UL LISTED
ANDERSON QUALITY SPRING MFG. INC.     Booth # 210
Service Categories: Springs - Coil • Springs - Flat • Springs - Wave • Assemblies • Stampings - Fourslide

Custom manufacturer of springs, wire forms and formed metal products. Our customers are in the automotive, sporting goods, electronic, medical, dental and motorcycle suspension products industries, worldwide. We work with our customers from design and prototyping to supplier managed inventory programs.



Quality Certifications: ISO 9001:2015 • IATF 16949:2016
APEXX OMNI-GRAPHICS     Booth # 126
Service Categories: Nameplates, Dials & Panels • Labels, Tapes & Decals

Manufacturer of custom labels, nameplates, decals, panels, dials, tags, spacers and insulators. Long and short runs. Immediate delivery. Providing dependable, prompt, courteous service since 1963.



AQS INC.     Booth # 222
Service Categories: Assemblies - Turnkey • Assemblies - Printed Circuit Boards • Assemblies - Electrical • Assemblies - Electromechanical • Optical Components

EMS Provider with capability to support from early design to market in shortest time frame at very low cost solution. Full support of PCBA & box build from NPI to mass production. ITAR Compliant.



Quality Certifications: IPC610B • ISO 9001 • TUV / UL LISTED • ISO 13485
ARGO SPRING MFG. CO. INC.     Booth # 127
Service Categories: Springs - Coil • Springs - Flat • Wire Forming & Fabricating • Stampings - Fourslide • Stampings - Metal

Manufacture CNC Coil springs, Flat springs, CNC wire forms, Metal Stampings, Fourslide products, assemblies (welding, staking, riveting etc.), washers (Belleville and curved) to blue print or specifications. AS9100 Certified.

Quality Certifications: ISO 9001:2008 • AS 9100C
ARMSTRONG RAPID MANUFACTURING     Booth # 220
Service Categories: Castings - Plaster Mold • Castings - Graphite Mold • Machining - Castings • Plastics - Reaction Injection Molding • Prototypes - Rapid Casting

An industry leader in providing prototype/short run machined aluminum castings, & Reaction Injection Molded parts for over 45 years. Full in-house capability including: DFM support, Tooling, Foundry (Plaster, Precision Airset Sand, One Shot Tool-less, Graphite Die), RIM Molding, CNC Machining, Paint & Finishes.



Quality Certifications: ISO 9001:2008 • AS 9100 REV C • ITAR
ASSEMBLETRONICS     Booth # 519
Service Categories: Assemblies - Cable • Assemblies - Turnkey • Assemblies - Electromechanical • Assemblies - Electrical • Control & Measurement Electronics

Manufacturing services company providing complex wire harnesses & mission critical cable assemblies, electromechanical box-build & control systems, high-pressure tubing & equipment integration and over-molding. Our mission is protecting your brand with exacting results.

Quality Certifications: 8 D SYSTEM • AS9100 REV C/ISO9001:2008/ITAR • IPC 620A • UL 508A
ASSEMBLY FASTENERS INC.     Booth # 229
Service Categories: Fasteners • Slides • Assembly Hardware • Levers, Knobs & Handles • Abrasives

Distributor of fasteners, latches, access and motion hardware specializing in PEM, Southco, Accuride, Panduit, Heyco, Sugatsune, Dodge, POP and many more. Ask us about our Vendor Managed Programs, Kitting & special packaging. RoHS Compliant.

Quality Certifications: ISO 9001:2008
ASSEMTECH INC.     Booth # 427
Service Categories: Assemblies - Cable • Wire & Cable Harnesses • Assemblies - Printed Circuit Boards • Panels - Control • Plastics - Injection Molding

Contract manufacturing of cable assemblies, wire assemblies & harnesses, as well as printed circuit board assemblies & control panels.

Quality Certifications: ISO 9000 • IPC
AURORA TECHNOLOGIES INC.     Booth # 236
Service Categories: Fabricating - Plastic • Plastics - CNC Machining • Fabricating - Non-Metallic • Machining - Multi Axis • Waterjet Cutting - Non-Metal

Offers complete custom fabrication of thermoset and thermoplastic materials. The company machines (modern CNC machines), punches, turns, bends, forms, finishes and polishes. ATI also offers additional services such as assembly, installation of hardware and inserts, painting and sealing, part marking, lot traceability, PPAPs, C of C's and much more.

Quality Certifications: ISO 9001:2008 • UL LISTED
AXON CABLE INC.     Booth # 510
Service Categories: Wire & Cable Harnesses • Assemblies - Cable • Cable & Wire Manufacturing • Connectors & Couplings

Manufacturer of wires, cables and harnesses for advanced technologies; offers complete interconnect solutions to a wide range of applications: energy, general industry, consumer electronics, medical, automotive, aeronautics, space, military, telecommunications and research centers.

Quality Certifications: MIL-STD-790 • CAGE CODE • ISO 14000 • UL, CSA, CE & ITAR
BARE BOARD GROUP     Booth # 110
Service Categories: Fabricating - Printed Circuit Boards • Printed Circuit Boards - Aluminum Clad • Circuits - Flexible • Prototypes - Fabrication • Prototypes - Electronic

Prototype through production, BBG is dedicated to providing quality PCB's built domestically & offshore. Rigid, Rigid Flex, Flex & Metal Clad PCB's. ITAR Registered (Domestic & Offshore), Military and Aerospace production. Specializing in RF; Medical; LED Lighting, Automotive and ITAR applications. BBG is also WEE, UL and RoHS Compliant and a Minority Business Enterprise.



Quality Certifications: ITAR • ISO 9001:2008 • TS 16949 • ISO 14001
BATESVILLE PRODUCTS INC.     Booth # 122
Service Categories: Castings - Permanent Mold • Castings - Aluminum • Castings - Zinc

Aluminum & zinc castings, engineering assistance, in-house tooling, machining & assembly. Castings from a few ounces to 80 lbs. Quantities from 500 to 150,000.



Quality Certifications: ISO 9001:2008
BBM INC.     Booth # 332
Service Categories: Assemblies - Turnkey • Surface Mount Technology - Assembly

An (EMS) Electronic Mfg. Service provider. Specializing in circuit board assembly. SMT Placement, Thru-hole insertion & mechanical assembly. Reflow, wave, hand & selective solder applications. Automated assembly inspections with AOI (Automated Optical Inspection) & Phoenix x-ray for blind leaded solder connections. Completely integrated operating system. Blended with the latest in capital equipment & enhanced with a progressive, single piece flow, assembly process & precise communication. We are Woman Owned and DOD Registered. For a quote please contact sales@bbm-inc.com.

Quality Certifications: ISO 9001:2008 • IPC A-610D CLASS 2&3 • UL APPROVED • HUB
C & K PLASTICS/VALLEY EXTRUSIONS     Booth # 121
Service Categories: Plastics - Thermoforming/Vacuum Forming • Plastics - Pressure Forming • Extrusions - Plastic • Plastics - Extruded Profiles • Plastics - Thermoplastic Extrusion

C&K Plastics and Valley Extrusions are sister plastic companies. Since 1963 C&K has specialized in cut sheet vacuum, pressure and twin sheet forming, also providing CNC machining and contract manufacturing. Since 2001 Valley has specialized in custom plastic extrusions with co-extrusions & tri-extrusions, large parts, complex hollows & tubing capabilities produced in most thermoplastics. Our three facilities have a combined 450,000 sq.ft. giving us the capacity to meet even the largest requirements. Valley Extrusions - PA, C&K - NJ, and C&K Georgia - GA.



Quality Certifications: ISO 9001:2008
CADBLU     Booth # 520
Service Categories: 3D Printing • CAD/CAM Software • CAD/CAM Software • CAD Design Services • Machinery Sales & Services - New & Used

Created to provide partial and complete solutions in the area of Computer Aided Design (CAD), Scanning Technologies, additive and subtractive processes (RP & CAM) of model generation from digital data, and software and materials to allow turnkey solutions. We develop our solutions through partnerships with technology manufacturers and various software developers.

CALLEN MANUFACTURING     Booth # 507
Service Categories: Castings - Die • Castings - Die, Aluminum • Castings - Die, Zinc • Machining

We manufacture complex aluminum, zinc & miniature zinc (5-slide) die castings. Quality certified die castings are produced in Northlake, IL and Fountain Inn, SC.

Quality Certifications: ISO 9001:2008
CAPLUGS      Booth # 440
Service Categories: Plastics - Injection Molding • Plastics - Extruded Profiles • Die-Cutting • Tooling

A worldwide leader in product protection for over 65 years. We specialize in six different molding processes allowing us to offer a variety of design and material options. Our catalog highlights 12,000+ parts in stock and ready to ship. If a part doesn’t meet your requirements, our team of engineers will work with you to design exactly what is needed.

Quality Certifications: ISO 9001 • ISO/TS 16949 • ISO 13485 • ISO 14001
CATALYST PRODUCT DEVELOPMENT GROUP     Booth # 219
Service Categories: Industrial Design Services • Engineering & Technical Services • 3D Printing • Tooling - Plastic Injection Molding • Plastics - Injection Molding

Ingenuity, speed, and collaboration; that's how we cultivate vital intellectual property. With over 15 years of experience in industrial design, engineering, prototyping, and manufacturing - we are the experts at bringing products to life. Discover your market potential with integrated solutions from Catalyst Product Development Group.



CENTURY SPRING CORP.     Booth # 328
Service Categories: Springs - Coil • Stampings - Fourslide • Wire Forming & Fabricating • Springs - Flat • Springs - Wave

A MW Industries location, is the go-to source for Made in USA stock and custom springs, for any OEM or MRO application. Same day shipments from over 35,000 stock designs - compression, extension, torsion, tapered, disc, urethane and die springs. Century also specializes in custom springs. Inquire at info@centuryspring.com. FREE CATALOG upon request.



Quality Certifications: ISO 9001:2008
CLARK'S PRECISION MACHINE AND TOOL     Booth # 514
Service Categories: Machining - Multi Axis • Tools, Dies & Fixtures • Assemblies • Machining - Precision CNC • Sewing

A machine shop/manufacturer, Clark’s Precision Machine and Tool builds-to-print; encompassing a machine shop, welding, paint, assembly, and upholstery.

Quality Certifications: ISO 9001:2008 • AS 9100 • DOD REGISTERED • AWSD17.1
COX MFG. CO.     Booth # 330
Service Categories: Screw Machining - Swiss/CNC Swiss • Machining - Precision CNC • Machining - Multi Axis • Screw Machining - Multi Spindle • Machining - CNC Milling & Turning

Custom screw machine products in volume for the auto/trucking, medical, firearms, geophysical, aero/defense industries and more. We expertly operate CNC, Swiss, multi-axis, and multi-spindle machines to name a few. Parts range from miniature to 2.00" diameter, with a wide diversity of materials, delivered reliably.

Quality Certifications: ISO 9001:2008 • ITAR REGISTERED
CRADDOCK FINISHING CORP.     Booth # 120
Service Categories: Metal Finishing - Painting • Plastics - Painting • Shielding - EMI/RFI • Powder Coating • Pad Printing

Contract production painting (Metal/Plastics) - Powder, Liquid, CARC, Teflon, and EMI/RFI Shielding. Chemical pre-treatment including RoHS Chromate, Blasting, Pad Printing, Silk-Screening, Mask Making, High-Bake capability and Blister Packaging.



Quality Certifications: ISO 9001:2008 • CONTROL PLANS • FEMA • FLOW CHARTS - SPC
DA/PRO RUBBER INC.     Booth # 111
Service Categories: Rubber Molding • Plastics - Injection Molding • Silicone / Rubber - Liquid Injection Molding • Rubber To Metal Bonding • Rubber - Compression Molding

5 facilities for compression/injection molding - high-quality custom rubber, TPE, & plastic components molded to precision tolerances such as diaphragms, seals, connectors, molded shapes, rubber to metal parts for medical device, electronic & aerospace industries. Class 10,000 cleanroom - chemists & engineers assist in optimal moldability. sales@daprorubber.com



Quality Certifications: ISO 9001
DEKRA NORTH AMERICA     Booth # 407
Service Categories: Inspection Services • Quality Systems • Testing - Mechanical Standards • Testing - Environmental

We are a 3rd party certification and verification company that validates manufacturing standards for U.S. based clients. These standards include ISO 9001, 14001, 50001, 13485, AS 9100, TS 16949, OHSAS 18001 and many others. DEKRA also provides Assessment Services for Sustainability, Responsible Supply Chain, Energy Performance, Business Continuity/Disaster Recovery, and Asset Integrity Management.

Quality Certifications: ISO 9001:2008 / AS 9100 • ISO/TS 16949 • ISO 14001:2004 • ISO 13485 / ISO 50001
DESIGNS FOR TOMORROW INC.     Booth # 225
Service Categories: Machining - Precision CNC • Prototypes - Machining • Fabricating - Sheet Metal • Inspection Services

Precision machining in the fields of medical, aerospace, automotive, tool & die repair, electronics & plastics using the most advanced equipment and a team of highly professional machinists.

Quality Certifications: ISO 9001:2008
DIAMOND WIRE SPRING COMPANY - TEXAS      Booth # 314
Service Categories: Springs - Coil • Wire Forming & Fabricating

Manufacturer of custom & stock springs. Design engineering-rush delivery. Capable of production from .008" - .750" wire size. Mil-I-45208 compliant.

Quality Certifications: ISO 9001:2008
DIGITAL MACHINING SYSTEMS     Booth # 326
Service Categories: Machining • Machining - Precision CNC • Machining - CNC Milling & Turning • Machining - Multi Axis • Machining - Production

We offer substantial custom manufacturing capacity for clients in need of precision machined parts for their own products and services. We offer tremendous manufacturing expertise, technology and capacity in this regard and serve as a professional manufacturing department for our clients.



Quality Certifications: ISO 9001:2008
EDM TECHNOLOGIES INC.     Booth # 123
Service Categories: EDM • EDM - Wire • EDM - Sinker • EDM - Small Hole Drilling

Electrical discharge machining (EDM) shop specializing in Wire EDM, Sinker EDM, Small Hole EDM & precision machining. EDM Technologies is a certified precision tooling source.

Quality Certifications: ISO 9001:2008
ELECTRONIC SYSTEMS INC.     Booth # 402
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Turnkey • Surface Mount Technology - Assembly • Assemblies - Electronic • Assemblies - Electromechanical

We've been providing Legendary Service to our customers for over 35 years. Founded in 1980, we provide a full range of electronic manufacturing services (EMS) to original equipment manufacturers (OEMs) in the industrial, commercial, medical, energy and HVAC markets.

Quality Certifications: ISO 13485:2003 • ISO 9001:2008 • ITAR
ELECTROPIN TECHNOLOGIES     Booth # 322
Service Categories: Cold Heading - Cold Forming • Wire Forming & Fabricating • Thread Rolling • Thread Machining • Cleaning & Degreasing

Manufacturer of small pin shaped parts. Cold Heading & Die Pin Rolling are high speed, scrap free processes which yield tremendous cost savings.

Quality Certifications: ISO 9001:2000
ELESA USA CORP.     Booth # 518
Service Categories: Levers, Knobs & Handles • Fasteners • Fluid Power • Packaging

Designs & manufactures plastic thermal engineered products according to the ISO 9001 standard. Product consists of Elesa designed families of product including operating elements, clamping elements, clamping levers, plastic handles, control elements, indexing elements, machine elements, leveling elements, hinges, latches and accessories for hydraulic systems.



Quality Certifications: ISO 9001 • ISO 14000
EPILOG LASER     Booth # 205
Service Categories: Lasers • Laser Cutting • Laser Engraving • Laser Marking • Bar Coding

An industry leader in design of laser engraving, cutting & marking systems, manufacturers of the Epilog Zing, Mini, Helix, Fusion and FiberMark series of laser systems.



Quality Certifications: ANSI STANDARDS • IEC • CE • CFR 21
EVANS     Booth # 113
Service Categories: Stampings - Deep Drawn Shells • Eyelets & Drawn Shells • Stampings - Metal

Conventional multi-station transfer presses. Custom designed progressive type presses. Thin-walled drawn metal shells, tubular parts and precision metal stampings.



Quality Certifications: ISO 9001:2015
FALCON PLASTICS     Booth # 317
Service Categories: Plastics - Injection Molding • Plastics - Blow Molding • Plastics - In Mold Labeling & Decorating • Plastics - Elastomeric Overmolding • Plastics - Hot Stamping & Screening

An innovative leader in the custom injection and blow molding industry specializing in services from design assistance through distribution. Servicing the manufacturing industry since 1975, we pride ourselves on our long term relationships with our customers and associates.



Quality Certifications: ISO 9001:2008 • BSI CERTIFIED • FDA
FKI USA     Booth # 417
Service Categories: Stampings - Metal • Stampings - Progressive Die • Stampings - Short Run • Tools, Dies & Fixtures • Stampings - High Volume

High volume custom metal stamping operation specializing in Class A high cosmetic decorative products as well as other complex stamped parts made in the USA. Our markets include appliance, auto, transportation, industrial, and more. Our facility includes a full service precision tool room and press room providing die design and maintenance.

Quality Certifications: ISO 9001:2008
FORTE PRODUCTS     Booth # 527
Service Categories: Plastics - Rotational Molding • Assemblies • CAD Design Services • Tanks & Reservoirs • Conversion - Metal to Plastic

Full service manufacturer of custom OEM parts to enhance your brand. Value-added services to finish parts to your exacting specifications. CAD/SolidWorks engineering development. Mold-in and post mold graphics. Line and bench assembly. Large parts up to 23' long x 10' diameter.

FRAEN CORPORATION     Booth # 115
Service Categories: Screw Machining - Escomatics • Screw Machining - Swiss/CNC Swiss • Plastics - Injection Molding • Stampings - Fineblanked • Assemblies

Since 1942 Fraen has been a one stop high quality manufacturer of specialized Precision Swiss-Type Machined, Injection Molded & Metal Stamped components. We fully service our customers from our 3 US based manufacturing locations in MA & TN. We offer over 300 single spindle CNC and CAM driven Swiss-type machines. In-house mold design & fabrication. Automatic assembly.

Quality Certifications: ISO/TS 16949:2009 • ISO 9001 • ISO 14001
GALLAGHER FLUID SEALS INC.     Booth # 206
Service Categories: Gaskets, Seals, Washers & O-rings • Rubber Molding • Prototypes - Rubber • Extrusions - Rubber

For over 60 years, we have consistently provided superior technical solutions specializing in O-rings, seals, custom PTFE and molded shapes with the lowest total cost of ownership. Creating competitive advantages for our customers in their products or markets is what makes Gallagher "The Seal Specialist". 2nd location: 21 Deer Park Dr., East Longmeadow, MA, Ph: 800-356-0061



Quality Certifications: ISO 9001:2008 • ISO 14001-2004
GASSER & SONS INC.     Booth # 119
Service Categories: Stampings - Deep Drawn Shells • Machining - CNC Milling & Turning • Stampings - Metal • Stampings - Progressive Die • Machining - Precision CNC

Since 1916 Gasser continues to Provide: Precision Deep Drawn Components, Secondary Machining, A Vast Tooling Library, Custom Formed Lead Lining for Housings and Assemblies, Design Engineering Services, Production Quantity Runs and Quality...with Confidence.

Quality Certifications: ISO 9001 • ITAR REGISTERED
GOPROTO INC.     Booth # 325
Service Categories: 3D Printing • Machining • Tooling - Plastic Injection Molding • Tooling - Casting • Prototypes - Models

Delivering turnkey plastic and metal part manufacturing solutions including industrial design model making, rapid prototyping, additive manufacturing, cast urethane, CNC machining, rapid sheet metal, rapid injection tooling, production parts (injection molding, stamping, die-cast, sheet metal), and part finishing to complete your product.



Quality Certifications: ISO 9001
GRAPHICAST INC.     Booth # 237
Service Categories: Castings - Permanent Mold • Castings - Graphite Mold • Castings - Zinc • Castings - Non-Ferrous

Zinc alloy castings using unique graphite permanent mold process. Low cost graphite molds make this process ideal for low to medium quantities. Eliminate expensive CNC hog-outs, high tooling costs, and long lead-times. In-house design, mold building and precision CNC machining. Cosmetic and protective finishes available.



Quality Certifications: ISO 9001:2008
GREENE RUBBER CO. INC.     Booth # 235
Service Categories: Rubber Fabrication • Rubber Molding • Rubber - Transfer Molding • Silicone / Rubber - Liquid Injection Molding

Custom rubber gaskets & seals. Custom rubber molding, LSR, vibration isolation, rubber-to-metal bonding, Chomerics EMI & Thermal materials, Rogers Poron Urethane Foams, 3M Adhesives, Parker O-Rings, St. Gobain tubing and Panasonic PGS.

Quality Certifications: ISO 9001:2008 • AS9100C
GROVER GUNDRILLING LLC     Booth # 217
Service Categories: Gundrilling • Honing

Precision deep hole gundrilling & honing specialists providing straight round holes with 16 RMS to 63 RMS hole finish; .031" to 10.00" ID; 1 inch to 25' depth; 1 oz. to 5000 lbs.; materials include plastics through hastelloy.



Quality Certifications: ISO 9001:2008
GUZMAN MFG. INC.     Booth # 429
Service Categories: Fabricating - Sheet Metal • Laser Cutting • Welding & Weldments • Prototypes - Fabrication • Welding - TIG Aluminum

Custom contract sheet metal fabrication to serve many industries, ISO 9001 & AS9100 certified. From prototype through production we offer full service fabricating for custom sheet metal parts & components. We offer Laser & Waterjet Cutting, Forming & Fabrication, CNC punch pressing, Welding TIG/MIG, hardware insertion & much more.

Quality Certifications: ISO 9001:2008 • AS9100
H&S MFG. CO.     Booth # 331
Service Categories: Fabricating - Sheet Metal • Machining - Precision CNC • Assemblies - Electromechanical • Assemblies - Mechanical • Laser Cutting

Precision Sheet Metal, Machining, and Electro Mechanical Assembly and Testing - 40 Years of Manufacturing Excellence.

Quality Certifications: ISO 9000:2008
H. & S. SWANSONS TOOL CO.     Booth # 425
Service Categories: Machining - Precision CNC • Assemblies - Mechanical • Machining - Multi Axis • Machining - Castings • Machining - Aluminum

Established in 1953, H & S Swansons is a manufacturer of complex machined parts. Swansons holds ISO 9001:2008 and AS 9100:2009, with NADCAP certified in-house finishing operations including: Chromate, Anodize, “Wet” Paint, Powder Coat (MIL-Spec) Painting, Product Marking, Impregnation and Passivation.

Quality Certifications: AS 9100 • ISO 9001:2008 • NADCAP • ITAR
HAGANS PLASTICS     Booth # 530
Service Categories: Plastics - Thermoforming/Vacuum Forming • Plastics - Pressure Forming • Plastics - Injection Molding • Plastics - CNC Machining • Fabricating - Plastic

Thermoforming quality parts since 1973, serving aircraft, medical, sports, transportation and many other industries. Our business philosophy is to provide high quality parts in an expeditious manner at a competitive price with 1st class service.

Quality Certifications: AS 9100
K & C MFG.     Booth # 408
Service Categories: Plastics - Injection Molding • Machining - Precision CNC • Molds & Moldmaking - Metal • Assemblies - Turnkey • Stampings - Metal

Custom tool & die manufacturing and production machining. Prolific in CNC turning, milling and fabrication. Also complete in-house injection molding facility for custom plastic parts.

KORMACHINE     Booth # 501
Service Categories: Machining - CNC Milling & Turning • Machining - Precision CNC • Machining - Stainless Steel • Machining - Multi Axis • Machining - Castings

Prototypes and manufactures complex machine milled and turned parts and assemblies for our clients principally in the Aerospace, Aircraft, Oil and Gas, Food and Beverage, Railroad, Construction, Defense, and Consumer Products Industries.

Quality Certifications: AS9100/ISO 9001:2000 • JCP • CAGE CODE • ITAR
LEE SPRING     Booth # 234
Service Categories: Springs - Coil • Springs - Flat • Springs - Wave • Stampings - Fourslide

Springs in stock ready to ship or made to your specifications. Large selection of stock Compression, Extension, Torsion, HEFTY™ Die, REDUX™ Wave, LeeP™ Plastic Composite, MIL-SPEC, Belleville Washer, Battery and Constant Force Springs. Custom Springs, Stampings, Wire Forms and Fourslide design and manufacturing. Prototypes through large production runs.



Quality Certifications: ISO 9001 • RoHS / REACH • MIL SPEC AS24585 • MIL SPEC AS24586
LYON INDUSTRIES - CHICAGO INC.     Booth # 516
Service Categories: Stampings - Metal • Waterjet Cutting - Metal • Washers • Stampings - Shims • Prototypes - Stamping

Thin Gauge metals manufacturing. Specializing in Waterjet cutting and stampings. Wide variety of materials and configurations. 3D water jet cutting available. Thicknesses of .001" to 1/2". Tight tolerances. Quick lead times. Prototypes, production, low-mid-high volumes.

Quality Certifications: ISO 9001:2008
M & F GAUGE AND SPECIALTY CO. INC.     Booth # 420
Service Categories: Machining - CNC Milling & Turning • Assemblies - Turnkey

Metal Machining, Punch Press, General Assembly.

Quality Certifications: ISO 9001:2008
MAGNETIC INSPECTION LABORATORY     Booth # 228
Service Categories: Metal Finishing - Anodizing • Testing - Non-Destructive • Metal Finishing - Passivating • Metal Finishing - Painting • Welding & Weldments

We perform the following services to customers in the aerospace, medical & power generation industries. These services include NDT (MPI, FPI, X-Ray), metal finishing (anodize, cadmium plating, passivation, chemfilm), coating (painting, Teflon, screenprinting) & welding / brazing. We are your true one stop shop.

Quality Certifications: AS 9100 • ISO 9001 • NADCAP
MANUFACTURING NEWS     Booth # 534
Service Categories: Publications

Manufacturing News reaches over 100,000 Metalworking Decision Makers monthly with the publication of five regional issues including the Southwest, Southeast, Northeast, Midwest and West editions.

MERCURY CORP.     Booth # 301
Service Categories: Fabricating - Sheet Metal • Metal Cabinets & Enclosures • Assemblies - Turnkey • Fabricating - Aluminum • Fabricating - Stainless Steel

AN INTEGRATED SOLUTION TO YOUR SUPPLY CHAIN - we build custom racks, frames, enclosures, plastics & stamping assemblies. CORE PROCESSES: Design, Metal Fabrication, welding of all types of metals, Plastic Injection Molding, Finishing, Turn-Key Assemblies & KAN BAN.



Quality Certifications: ISO 9001:2008 • ISO 13485 • AS 9100 • ITAR REGISTERED
MERRYWEATHER FOAM INC.     Booth # 424
Service Categories: Fabricating - Foam • Foam Conversion • Die-Cutting • Waterjet Cutting - Non-Metal • Packaging

Foam fabricator & distributor of open & closed cell foam, sponge rubbers, and silicones in the automotive, appliance, electrical, HVAC filtration, medical & industrial markets. Capabilities: sheeting, slitting, adhesive lamination, water-jet, rotary die & steel rule die cutting & packaging. Products: Gaskets/Seals, Filters, Sound dampening, Pads, Cushions & Packaging.

Quality Certifications: ISO 9001:2000
METRO CUSTOM PLASTICS INC.     Booth # 302
Service Categories: Plastics - Injection Molding • Extrusions - Plastic • Plastics - Extruded Profiles • Plastics - Insert Injection Molding • Plastics - CNC Machining

Turning Your Ideas Into Plastic! Injection Molding 100-500 ton, Plastic Extrusions, Tool Shop, Assembly, Design, Engineering & Prototypes. Thinking Green? Molding recycled plastic since 1982. We can mold, assemble, package, warehouse & distribute "YOUR" product. Contact: Mike Havel sales@metrocustomplastics.com

Quality Certifications: ISO 9001-2012
MICRO FORMS INC.     Booth # 323
Service Categories: Stampings - Metal • Stampings - Progressive Die • Stampings - High Volume • Stampings - Micro-Miniature • Stampings - Tapped

Specializing in Progressive Precision Metal Stampings with In House Class A Tool and Die design, build, maintenance and production. Precision Metal Stampings; Materials from .003" Thick, High to Mid Volume Production, Prototypes & Assemblies. All Industries Served. At Micro Forms we engineer quality, value & profitability for all our customers. For information please send requests to sales@mforms.com

Quality Certifications: ISO 9001:2008
MID-WEST SPRING & STAMPING     Booth # 223
Service Categories: Springs - Coil • Stampings - Fourslide • Stampings - Metal

Springs from wire diameters to 2", wire forms from .010" to .250", clock, die & special springs, formed parts, flat springs, spring washers & stampings.



Quality Certifications: ISO 9001:2008
MIDWEST WIRE PRODUCTS LLC     Booth # 423
Service Categories: Wire Forming & Fabricating • Stampings - Metal • Stampings - Fourslide • Welding - Robotic • Threaded Parts

A full-service metal forming company specializing in the production of custom wireforms and stampings. We have a broad range of manufacturing capabilities, enabling us to produce a wide range of wire form and stamped products.

Quality Certifications: ISO 9001:2008
MILLS PRODUCTS     Booth # 509
Service Categories: Hydroforming • Roll Forming • Stampings - Metal • Powder Coating • Welding - MIG

A turnkey metal fabricator with a reputation for producing lightweight, aesthetically superior parts through hydroforming, tubular stamping and roll forming. Since 1945, major manufacturers have trusted us to make their components stronger, lighter and more economical.

Quality Certifications: ISO 9001:2008
MINOR RUBBER CO. INC.     Booth # 118
Service Categories: Rubber Molding • Rubber - Injection Molding • Extrusions - Rubber • Rubber - Compression Molding • Rubber - Transfer Molding

Custom molders, extruders and dip molders of rubber products. Also extensive line of standard catalog items, such as grommets, bumpers, extruded profiles, isolators, bellows, etc. Most items are searchable online at www.minorrubber.com.



Quality Certifications: MIL-I-45208A
MLC CAD SYSTEMS     Booth # 224
Service Categories: CAD/CAM Software • CAD Design Services • Systems Integration

For more than 30 years, we have provided industry leading CAD, CAM, CAE, PDM & PLM solutions throughout the Southern US & Northern Mexico & awarded as one of the largest & most well-respected companies in the VAR business. We offer a variety of solutions including Solidworks, Mastercam & 3DSystems Printers for reverse engineering & the technical services experience necessary for your business needs as well as dedicated consulting services.

MODERN INVESTMENT CASTING CO.     Booth # 410
Service Categories: Castings - Investment • Castings - Stainless Steel • Castings - Steel • Castings - Aluminum • Castings - Brass

Specializing in short-run production and prototype investment castings weighing up to 50 lbs, Modern Investment Casting Company (MICC) casts a wide variety of air-meltable alloys in 5 different bases including Iron, Nickel, Cobalt, Copper, and Aluminum.

Quality Certifications: ISO 9000:2001 • PED
NEODESHA PLASTICS INC.     Booth # 513
Service Categories: Plastics - Thermoforming/Vacuum Forming • Plastics - CNC Machining • Plastics - Heat Sealing & Welding • Plastics - Pressure Forming

A privately held company started in 1969. Our manufacturing takes place in 2 buildings totaling 200,00 square feet. We employ between 70 and 250 people, depending. We provide companies with custom vacuum formed parts of all sizes and shapes. We are located in South East Kansas, and currently ship all over the world, including Mexico.

Quality Certifications: ISO 9001:2008 • UL REGISTERED
NOVACOPY INC.     Booth # 413
Service Categories: Rapid Prototyping • Rapid Prototyping - Equipment • 3D Printing • Calibration & Metrology • Prototypes - Plastic

NovaCopy is an award-winning provider of 3D Printer technology, copiers and document solutions. The leading 3D Systems reseller in Tennessee and Texas, NovaCopy offers free cost analysis allowing you to choose the solutions, equipment and software to meet your needs within your budget.

OGS INDUSTRIES (OHIO GASKET & SHIM CO)     Booth # 209
Service Categories: Stampings - Metal • Fabricating - Sheet Metal • Laser Cutting • Welding - Robotic

Manufacturer of Custom Metal Stampings, Custom Metal Fabrication, Metal Forming, Brackets, Precision Shims, Metallic Gaskets, Laser Cutting, CNC Punching, Welding (Mig, Spot, Stud, Nut), Inventory Stocking Programs, Specialized Packaging, Part Marking & Labeling.

Quality Certifications: TS 16949 • AS 9100 • ISO 14001
ONDRIVES.US CORP.     Booth # 405
Service Categories: Gearboxes • Gears • Couplings - Misalignment • Fabricating - Aluminum • Fabricating - Steel

We design and manufacture standard and custom quality precision gearboxes, gears, worm gears, shafts, couplings and other precision components for manufacturers of medical, scientific, process instrumentation, packaging equipment, transportation, robotics, aerospace and military market segments.

Quality Certifications: ISO 9001:2008 • ITAR REGISTERED
ONE SOURCE MANUFACTURING     Booth # 526
Service Categories: Machining - CNC Milling & Turning • Screw Machining - Swiss/CNC Swiss • Machining - Multi Axis • EDM - Wire

We are your source for precision machine work. We specialize in tight tolerance manufacturing on a wide variety of materials, ranging from engineered polymers to exotic alloys. Our customers' needs govern our solutions-oriented services. We thrive on tackling tough engineering & manufacturing problems.

Quality Certifications: ISO 9001 • ISO 13485
PCM PRODUCTS INC.     Booth # 101
Service Categories: Photochemical Etching & Machining • Shielding - EMI/RFI • Chemical Milling

We produce precision, burr/stress free parts, .1" thick down to .0001" thick. In-house plating, forming, heat treating and assembly. Competes with laser cutting and EDM. COMPLIANT TO ISO 9001:2000 & AS9100B & ANSI/ASQ Z1.4-2003.



Quality Certifications: MIL-I-45208
PDI PLASTICS     Booth # 422
Service Categories: Plastics - Thermoforming/Vacuum Forming • Plastics - Pressure Forming • Molds & Moldmaking - Plastic • Fabricating - Plastic

We specialize in the design, prototyping & manufacture of custom thermoformed plastic parts for OEMs in many industries including electronics, healthcare, automotive, beverage, outdoor and retail. Expert at making trays, covers and enclosures. We can quickly turn your sketches and drawings into 3-D models, make molds (in house) and produce sample parts.

PEQUOT TOOL & MFG. INC.     Booth # 337
Service Categories: Machining - CNC Milling & Turning • Fabricating - Sheet Metal • Laser Cutting • Screw Machining - Swiss/CNC Swiss • Machining - Robotic

Precision Machined & Fabricated parts. Turning (Swiss & multitasking, mill/turn), Milling (horizontal & vertical), Laser cutting & engraving, Punching, Forming, Stamping, Welding & Assembly.

Quality Certifications: ISO 9001:2008 • AS 9100:2009 REV C
PERMABOND ENGINEERING ADHESIVES     Booth # 221
Service Categories: Adhesives • Gaskets, Seals, Washers & O-rings • Potting & Encapsulation • Rapid Prototyping • Coatings - Conformal

Quality certified manufacturer of adhesives & sealants. Product lines include anaerobic, cyanoacrylates, epoxy, structural acrylic, UV/visible, modified epoxy, MS polymer and polyurethanes.

Quality Certifications: ISO 9001:2015
PETERSEN PRECISION ENGINEERING LLC     Booth # 233
Service Categories: Stampings - Fineblanked • Grinding - Creep Feed • Machining - Precision CNC • Grinding - I.D. & O.D. • Grinding - Double Disc

Complete precision metal part manufacturing service, offering fineblanking, CNC milling & turning, lapping, EDM, honing and grinding. Grinding includes double disc, blanchard, surface, cylindrical, centerless and creepfeed.



Quality Certifications: MIL-45208 • MIL-STD-105-E
PFC FLEXIBLE CIRCUITS LTD.     Booth # 416
Service Categories: Assemblies - Printed Circuit Boards

Designs, manufactures and assembles flexible circuits. We specialize in high density, high speed product.

Quality Certifications: ISO 9001 • ISO 13485
PLASTICS DESIGN & MFG.     Booth # 437
Service Categories: Plastics - Pressure Forming • Plastics - Thermoforming/Vacuum Forming • Machining - CNC Milling & Turning • Plastics - Extruded Profiles • Assemblies

Custom Manufacturer of Thermoformed Products (Vacuum and Pressure) Supplying Medical, Transportation and Food Service OEM's. Manufacturing Services from Prototyping and Product Development to Long and Short Run Production Requirements. In House Process Integration Include Design Development and Tooling to Value Added Assembly and Part Finishing and Packaging.

Quality Certifications: ISO 9001:2000 DESIGN EXCLUDED • UL APPROVED • ISO 9001:2008
PRECISION METAL FAB LLC     Booth # 412
Service Categories: Laser Cutting • Fabricating - Stainless Steel • Fabricating - Steel • Stampings - Metal • Tools, Dies & Fixtures

Partnering with manufacturers assisting them in their fabrication needs. Precision Metal Fab offers the following services: Laser Cutting (up to 1" thick), Forming, Welding, CNC Turret Punch, Metal Stamping (up to 300 Ton), Water Jet, Small Assembly, Powder Coating, and Tool & Die Making. 58,000 Sq. Ft. Facility located in North Central Oklahoma.

PRECISION RESOURCE     Booth # 125
Service Categories: Stampings - Fineblanked • Machining - CNC Milling & Turning • Lapping

The leading metal forming company through the fine blank process. 24 presses from 25-320 tons. Processes include lapping, deburr, cleaning & inspection. Complete in-house tooling design & fabrication. In-house CNC-machining capabilities. Metals include: stainless steels, copper, brass, aluminum & inconel.

Quality Certifications: TS 16949:2002
PRECISION TECHNOLOGY INC.     Booth # 324
Service Categories: Surface Mount Technology - Assembly • Assemblies - Printed Circuit Boards • Assemblies - Electromechanical • Wire & Cable Harnesses • Electronics - New Product Development

An electronic design and assembly company that focuses on cost-competitive, high-quality manufacturing services. With volumes ranging from prototypes to mid and high volume production, PTI delivers quality, flexibility and uncompromising customer service.

Quality Certifications: ISO 9001:2015/13485:2003 • AS 9100C/IPC-A-610 • J-STD-001 • UL & ITAR CERTIFIED
PRODUCT SAFETY CONSULTING     Booth # 528
Service Categories: Safety Certifications • Certification Services • Safety Products & Components

Providing product developers and manufacturers with expert advice and testing services since 1988, so they can confidently secure product safety and regulatory compliance. From lighting fixtures to consumer products, to motor controllers and medical devices, we have helped customers obtain more than 3,000 product certifications worldwide.

QC GROUP LLC     Booth # 511
Service Categories: Inspection Services • Engineering & Technical Services • Quality Systems • Testing - Non-Destructive

The premier service provider in Quality, offering contract dimensional inspection, 3D modeling, reverse engineering, and NDT services. A2LA accredited and ITAR registered, open 24/6 for rapid turnaround and accurate results. Online quotes receive a response in 5 minutes, quotes in hand within 2 hours. More at qcgroup.com

Quality Certifications: ISO 17025 • ITAR
R & D MANCO     Booth # 414
Service Categories: Machining - Precision CNC • Machining - CNC Milling & Turning • Machining - Exotic Materials • Splines • Machining - Multi Axis

A high precision machine shop with the capacity and capability to manufacture your complex and difficult to machine parts. We have an internal assembly department and partner with the top processors so we can deliver your parts complete with the best customer experience.

Quality Certifications: AS 9100 REV B • ISO 9001:2008
RAPID     Booth # 212
Service Categories: Prototypes - Rapid Sheet Metal • Prototypes - Machining • Assemblies - Cable • Machining - CNC Milling & Turning • Fabricating - Sheet Metal

We are a subtractive rapid prototyping manufacturer, specializing in quick-turn prototype and short-run production custom parts. RAPID’S core services include Rapid Sheet Metal - sheet metal fabrication services; Rapid Machining - CNC machining services; and Rapid Wire Cable - wire harnesses, cable assemblies, and electro-mechanical box build assemblies.



Quality Certifications: ISO 9001:2008 • ITAR REGISTERED
ROBERTS AUTOMATIC PRODUCTS INC.     Booth # 216
Service Categories: Screw Machining - Multi Spindle • Machining - CNC Milling & Turning • Machining - Precision CNC • Machining - Multi Axis • Screw Machining - Swiss/CNC Swiss

Offering precision production machining, featuring twin-spindle multi-tasking CNC turnmill centers and multi axis CNC cells, swiss, & multiple spindle screw machines.



Quality Certifications: ISO 9001:2008 • ITAR REGISTERED
RONCELLI PLASTICS     Booth # 215
Service Categories: Plastics - CNC Machining • Assemblies - Mechanical • Rapid Prototyping • Machining - Precision CNC • 3D Printing

Since 1969 we have specialized in Precision Fabrication, CNC Machining, Die Cutting, Rapid Prototyping and Clean Room Assembly of Plastic and Non-Metallic components. Ask about our 5 axis milling capabilities.

Quality Certifications: AS 9100C • ISO 9001:2008 • ISO 13485:2003 • ITAR REGISTERED
SEAHAWK MANUFACTURING     Booth # 436
Service Categories: Rubber Molding • Rubber - Compression Molding • Rubber - Transfer Molding • Rubber To Metal Bonding • Rubber - Injection Molding

Custom rubber molding manufacturer. Rubber parts including seals, gaskets, o-rings, grommets, EMI/RFI shielding, custom shapes and more, using compression molding, injection molding and transfer molding. ISO 9001:2008 certified. Reaux Medical Molding is our parallel company dedicated to medical device molding and is ISO 13485:2003 Certified. Email sales@seahawkmfg.com.

Quality Certifications: ISO 9001:2008 • ISO 13485:2003
SEALING DEVICES INC.     Booth # 124
Service Categories: Gaskets, Seals, Washers & O-rings • Rubber - Injection Molding • Shielding - EMI/RFI • Die-Cutting • Adhesives

Manufacturer/fabricator of gaskets, O-rings, EMI shielding, adhesives, seals, custom molded rubber, and sponge parts. Also, compression, transfer and injection molding on-site. In-house tooling. Authorized Distributors for Parker Seal, Chomerics, Gore, 3M, Rogers, Garlock, Flexitallic & Loctite. Veteran Owned, Small Business & ITAR registered. seals@sealingdevices.com



Quality Certifications: AS 9100 REV C • ISO 9001:2008 • MIL-I-45208 • MIL STD 45662
SEAWAY PLASTICS ENGINEERING LLC     Booth # 201
Service Categories: Plastics - Injection Molding • Prototypes - Plastic • Plastics - Low Volume • Molds & Moldmaking - Plastic • Plastics - Painting

We are a full service plastic injection molding company specializing in prototype injection molding, low to mid volume production and mold making. We are headquartered in the Clearwater Beach/Tampa Bay area and have two manufacturing locations, Port Richey and Brooksville, Florida. Employing 160, Seaway strives to provide technology leadership and performance excellence to medical, aerospace, military, packaging, food service, industrial and consumer products.



Quality Certifications: ISO 13485:2003 / ISO 9001:2008 • ANSI/ASQ Q9001-2000 • ITAR REGISTERED • NADCAP ACCREDITED
SEI METALFORMS & SPRING ENGINEERS OF HOUSTON     Booth # 308
Service Categories: Springs - Coil • Stampings - Ferrous & Non Ferrous • Assemblies • Laser Cutting • Wire Forming & Fabricating

SEI MetalForms is a full-service, ISO Certified manufacturer of precision formed metal parts, including stamping (5-500 ton presses), laser cutting, metal bending, wire forming, precision machining & assembly. Spring Engineers of Houston is an ISO9001 Certified manufacturer of custom coil springs, stampings, wire forms, & assemblies. We are known for design assistance, fast delivery, fine quality, & superior service for challenging applications. www.springhouston.com 713-690-9488 9740 Tanner Rd. Houston TX 77041

Quality Certifications: ISO 9002 • QS-9000
SIENNA CORP.     Booth # 335
Service Categories: Assemblies - Printed Circuit Boards • Systems Integration • Wire & Cable Harnesses • Stampings - Metal • Electronics - New Product Development

Turnkey Electronic Manufacturing Services: PCB Assemblies, PCB Design, Cable Assemblies & Wire Harnesses, Systems Integration, Injection Molded Plastics, Metal Fab., Machined Parts. Services: Prototype, Pilot Production, Testing, Turnkey Products, Warehousing, Volume Production, Order fulfillment & Manufacturing Software Solutions. 6 SIGMA

Quality Certifications: ISO 9001 • ISO 13485 • TS 16949 • AS 9100
SMART PRODUCTS     Booth # 227
Service Categories: Valves & Controls • Pumps & Reservoirs

Designs & manufactures an extensive family of check valves, pressure relief valves, pumps, & related components for advanced low pressure, low flow applications.



Quality Certifications: ISO 9001:2008
SOUTHERN PRECISION INC.     Booth # 419
Service Categories: Machining - CNC Milling & Turning • Machining - Precision CNC • Gundrilling • Machining • Machining - Exotic Materials

A full service CNC Job Shop in a new 50,000 square foot facility designed for high speed manufacturing of close tolerance parts. We specialize in Turning, Milling, and Gundrilling of hard to machine alloys with very fast delivery times. We handle runs from 20-20000 pieces. Our facility can operate 24 hours a day, and we can stock parts for JIT shipments.

SOUTHERN SPRING & STAMPING INC.     Booth # 109
Service Categories: Springs - Coil • Stampings - Metal • Laser Cutting • Wire Forming & Fabricating • Fabricating - Sheet Metal

Custom Compression, Extension & Torsion Springs. Wire Forms, Stampings, Fourslide parts, Progressive Die, In-House Tool & Die, Sheet Metal Fabrication, Fiberoptic Laser Cutting & Machining. Grinding, Shot-peening, Powder Coating, Painting & Silk Screen Printing. Prototypes to production. Second mfg. location Stokesdale, NC 336-548-3520. Visit our website for a free quote.



Quality Certifications: ISO 9001 • ITAR REGISTERED • Bell Helicopter Approved
STANFORDVILLE MACHINE & MFG. CO. INC.     Booth # 309
Service Categories: Machining - CNC Milling & Turning • Machining - Precision CNC • Screw Machining - Swiss/CNC Swiss • Plastics - CNC Machining • Assemblies - Turnkey

Full service CNC job shop. Prototype through production quantities. Precision machined parts made from materials ranging from teflon to titanium.

Quality Certifications: ISO 9001:2008 • AS 9100C • SPC
STARN TOOL & MFG.     Booth # 532
Service Categories: Machining - Precision CNC • Machining - CNC Milling & Turning • Machining - Multi Axis • Grinding - Precision • Fabricating - Plastic

Our manufacturing diversity is evident in the range of industries we serve. Continuously combining the latest technologies, processes and business practices over sixty years of precision tooling experience ensures the highest quality tooling while fulfulling customer driven lead times.

Quality Certifications: ISO 9001:2008 • SAM/DDTC REGISTERED
STERITOOL INC.     Booth # 522
Service Categories: Machining - CNC Milling & Turning • Machining - Stainless Steel • Machining - Swiss Laser & CNC Swiss • Laser Engraving • Metal Finishing - Tumble & Vibratory Polishing

Specializes in the manufacture of stainless steel CNC machined parts in both single component and assemblies, from prototype to full production. Steritool's capabilities include mill/turn, mill, swiss, heat treating, high speed polishing, laser marking and passivation. Alloys used include but are not limited to 304, 316, 316L, 17-4PH, 455, 465 and Inconel 718.

Quality Certifications: ANSI STANDARDS • ISO 9000:2008
SUPER PCB     Booth # 338
Service Categories: Fabricating - Printed Circuit Boards • Electronic Components • Assemblies - Printed Circuit Boards • Circuits - Flexible

A high quality PCB supplier based in Dallas, Texas. We have been providing PCB prototype & production for customers in a wide range of industries since 2003. With our ISO-9001 certified & UL approved overseas facilities, we are committed to providing quality PCBs at the most competitive prices.

Quality Certifications: ISO 9100/2000 • ISO 14000 • TS 16949 • UL CERTIFIED
SVTRONICS INC.     Booth # 310
Service Categories: Assemblies - Electronic • Electronics - New Product Development • Assemblies - Printed Circuit Boards • Prototypes - Electronic • Assemblies - Electromechanical

Our Product Design & Mfg. Services provide expert design and engineering covering electrical engineering, PCB layout, design verification & validation, compliance testing and Industrial design. Our state-of-the-art manufacturing facility also provides prototyping, mfg. services and works with the design team to ensure manufacturability of the product. Our Design Team has expertise in design for a variety of products including consumer electronics, medical devices, industrial and mobile computing products, communications interfaces, embedded controllers, automotive and industrial applications.

Quality Certifications: AS 9100 • ISO 13485 • ISO 14001 • ITAR
SWISSOMATION INC.     Booth # 207
Service Categories: Screw Machining - Swiss/CNC Swiss • Machining - Miniature Precision • Machining - Precision CNC • Plastics - Screw Machining • Screw Machining - Escomatics

Features a wide range of high quality production capabilities to meet your CNC machining needs on time & at competitive prices. Our experienced staff can set up & produce your parts on our Citizen Swiss CNC Screw Machines or our CNC Machining Centers. Our prototype department includes rapid prototyping capabilities to help you finalize your design. ISO 9001 Compliant. Also located at 254 Industrial Park Dr. Amherst, VA 24521 Phone: 434-946-7360.



Quality Certifications: SPC • PPAP's
SWOOSH TECHNOLOGIES     Booth # 208
Service Categories: CAD/CAM Software • Software For Job Shops & Manufacturers • CAD/CAM Training • Measurement - Software

We are your premier Product Lifecycle Management (PLM) solutions provider delivering software, support & training to give your business its competitive advantage. Headquartered in St. Louis, MO with regional support locations in Houston, Dallas, Chicago, New York & Nashville, we bring the latest CAD, CAM, CAE & PDM solutions to your front door.



SYSTEMATIC QUALITY MANAGEMENT SYSTEMS     Booth # 502
Service Categories: Quality Systems • Consulting - Manufacturing • Quality Assurance • Quality Control • Lean Manufacturing Consulting

A full-service quality engineering firm with years of experience in the development, implementation & on-going support of ISO9001-based international standards. ISO9001:2008; ISO9001:2015; AS9100; AS9110; AS9120; NADCAP; and ISO17025. Whether you're seeking a new certification, or have a mature QMS in place, we're here to assist.

TAPE INNOVATIONS LLC     Booth # 336
Service Categories: Die-Cutting • Gaskets, Seals, Washers & O-rings • Shielding - EMI/RFI • Waterjet Cutting - Non-Metal • Adhesives

Custom fabricator/die cutter serving all industries. We work closely with our customers & premier suppliers to select the best material for their applications & assure we remain on the cutting edge of technology & innovation. Let us help you find cost effective solutions for your fabricating needs. Contact our sales department at 817-568-1212.

Quality Certifications: AS 9100 REV C • ISO 9001-2008 • CERTIFICATE: FM 611476 • ITAR REGISTERED M36873
TEMPCO MFG. CO. INC.     Booth # 241
Service Categories: Stampings - Metal • Fabricating - Sheet Metal • Assemblies - Mechanical • Welding & Weldments • Tools, Dies & Fixtures

With over 70 years of experience, Tempco produces precision metal stampings, precision sheet metal fabrications and mechanical assemblies for clients across numerous industries. Tempco offers a complete tool & die room to go along with secondary services to be your one stop shop for metal stampings and sheet metal fabrications.



Quality Certifications: AS9100C • ISO 9001:2008
TR FASTENINGS     Booth # 431
Service Categories: Fasteners • Assembly Hardware • Screw Machining • Electronic Hardware

A global manufacturer and distributor of a wide range of fastenings and other category "C" components. USA headquarters in Houston, Texas which serves as the distribution point for all of North America. Product ranges include machine screws, screws for plastics, enclosure hardware, plastic hardware, and many other types and ranges.

Quality Certifications: ISO 9001 • ISO 14001
TRIENT TECH. / A DIVISION OF EIS INC.     Booth # 213
Service Categories: Adhesives • Gaskets, Seals, Washers & O-rings • Die-Cutting • Shielding - EMI/RFI • Packaging

OEM & Aftermarket contract manufacturer of thin film applications including acrylic foam tapes, transfer adhesives, thermal & electrically conductive tapes, water indicator tapes, adhesive backed shielding foils, vinyl tapes & more. From concept to finished product; services include Custom laminating up to 63”, Jumbo roll slitting to 63”, Plotter & Flatbed die cutting to 5’ x 10’, Precision rotary die cutting to 24”, tolerances +/- 0.003”, Offset, Flexographic & Digital printing.



Quality Certifications: ISO 9001:2008 • ISO/TS 16949:2009 • ISO 13485:2003 • ISO 14001:2004
TRUE CUT E.D.M. INC.     Booth # 320
Service Categories: Machining - CNC Milling & Turning • EDM • Tools, Dies & Fixtures • Machining - Production • Stampings - Metal

Precision CNC Machining, Milling and Turning and EDM facility. Specializing in short run and prototype parts, Tool & Die work and fixtures. Also, short thru medium volume production runs. Punch press capabilities to 400 ton press. Serving Aerospace, Defense, Oil and Gas along with commercial industries.

Quality Certifications: AS 9100 REV D
WALLACE ELECTRONICS     Booth # 316
Service Categories: Wire & Cable Harnesses • Assemblies - Electronic • Prototypes - Electronic

Woman Owned manufacturer of Custom Cable assemblies and Electronic Enclosures. Working with our Customers from Design to prototype through production.

Quality Certifications: ISO 9001:2008 • UL CERTIFIED • CSA LISTED
WARFAB     Booth # 512
Service Categories: Fabricating - Heavy Steel & Plate • Machining • Machinery - Design, Build & Rebuild • Assemblies - Mechanical • Welding & Weldments

A certified woman owned & minority owned heavy industrial maintenance, fabrication, and machining company that provides both shop and field services across the US. We are ISO 9001:2008 as well as ABS certified, with 90 ton overhead crane capacity in our shop. From contract manufacturing to turnkey project management, we can handle your job.

Quality Certifications: ISO 9000:2008 • ABS CERTIFIED
WEST POINT INDUSTRIES     Booth # 211
Service Categories: Fabricating - Heavy Steel & Plate • Fabricating - Steel • Machining - CNC Milling & Turning • Castings - Ductile Iron • Castings - Gray Iron

An engineering & manufacturing business located in West Point, Georgia. Manufacturing services include grey & ductile iron castings up to 2,000 pounds, CNC Milling & Turning, Fabrication & Assembly. Please visit www.westpoint.com for more information.

Quality Certifications: AWS D1.1 • AWS B2.1 • AWS D14.1 • AWS D31.3
WRICO STAMPING CO.     Booth # 214
Service Categories: Stampings - Metal • Stampings - Short Run • Stampings - Progressive Die • Welding - Robotic • Laser Cutting

Manufacturer of metal stampings with laser capabilities, assembly, spot welding, MIG & TIG welding. No quantity too small or too large. We are a short to medium run stamping company with progressive die capabilities. We supply quality parts and assemblies to the nation's leading OEM manufacturers.

Quality Certifications: ISO 9001:2008


© 2017 The Job Shop Company • 16 Waterbury Road, Prospect, CT 06712 • (800) 225-4535