Midwest Design-2-Part Show
October 11 & 12, 2017
Indiana Convention Center • Indianapolis, IN

Search by Category


Search by Keywords

  Reset Search  

0 Exhibitors to Meet

Exhibitor List

Listed below are the current exhibitors and service categories of companies in the show.
This page is also an interactive tool for you to use when planning your personal visit.

[ 186 ] companies match your search.
FEATURED EXHIBITORS listed first alphabetically
Service Categories: Wire & Cable Harnesses • Panels - Control • Electronic Enclosures • Assemblies - Electrical • Welding - Sonic

Manufacturer of cable assemblies, wire harnesses, electrical panels and enclosures. Leveraging our extensive network of suppliers we are able to provide our customers with world class assemblies built to UL, UL508A and IPC A620 industry standards. We are an ISO 9001:2015 facility.


Quality Certifications: IPC/WHMA-A-620 • UL LISTED • UL 508A • ISO 9001:2015
ACE WIRE SPRING & FORM CO. INC.     Booth # 225
Service Categories: Springs - Coil • Wire Forming & Fabricating • Wire Straightening • Assemblies - Mechanical • Hooks

CUSTOM "Spring & Wire Form Specialists" – Incorporating the newest CNC equipment technology to manufacture compression, extension, torsion springs, complex wire forms, and spring assemblies. Consistent quality, lower costs, on-time deliveries, and Design Engineering Assistance. Prototypes to production - Family owned & operated since 1939. Let ACE be your problem solver.


Quality Certifications: ISO 9001:2015 ITAR REGISTERED • MIL-SPEC 45208
ADRON TOOL CORP.     Booth # 110A
Service Categories: EDM • EDM - Wire • EDM - Sinker • EDM - Small Hole Drilling • Machining - Production

Wire EDM specialists with over 50 CNC mach., CNC (sinker) std. EDM; largest capacity, 40"x32"x18", workpiece wt. 10,000 lbs., 27-1/2" thick; metal parts rapid prototyping svc. and prod. runs of complex, contoured shapes in tough to mach. or exotic mtl.; CNC production machining, coord. measuring sys., SPC, OGP optical non-contact measuring.


Quality Certifications: ISO 9001:2008 • AS 9100 • NADCAP AS7116
Service Categories: Plastics - Injection Molding • Assemblies • Tooling - Plastic Injection Molding • Prototypes - Plastic • Plastics - Insert Injection Molding

APM: Adept-Productive-Motivated. Contract mfg., project mgmt., custom injection molding, UL approved assembly, finished packaging, drop-ship, plastic design seminars, design for manufacturing seminars, skilled engineering, dedicated customer service, domestic mfg., in-house tool shop, design enhancement, detailed quotes, mold flow analysis, and feasibility quotes.


Quality Certifications: ISO 9001:2008 • ISO 14001
ASH INDUSTRIES     Booth # 137
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Plastics - Rotational Molding • Plastics - Hot Stamping & Screening • Prototypes - Plastic

Engineered for You. In-House MIM, Thermoplastic, and Silicone Injection & Rotational Molding & Tooling as well as cast epoxy components & 7-Axis Swiss Lathe production. Molding includes custom inserts & over-molding, two shot molding. Component assembly, secondary processing & decorating, utilizing the latest in CNC, EDM & Modeling technology.


Quality Certifications: ISO 9001 • ISO 7 CLASS 10K CLEAN ROOM
BACHMAN MACHINE CO.     Booth # 227
Service Categories: Stampings - Progressive Die • Tools, Dies & Fixtures • Machining - Production • Plastics - Insert Injection Molding • Stampings - Metal

In business for over 90 years, Bachman Machine Company is a third generation undisputed leader in the area of value-added metal stampings, progressive and transfer stamping dies, production machining & plastic injection molded parts.


Quality Certifications: ISO/TS 16949 • ISO 9001 • QS-9000
C & A TOOL & ENGINEERING     Booth # 213
Service Categories: Machining - CNC Milling & Turning • Assemblies - Mechanical • Grinding • EDM • 3D Printing

Large job shop offering Milling, Turning, Grinding, EDM, Direct Metal Laser Sintering, Polishing, Gun Drilling, Ball Grinding & other machining operations.


Quality Certifications: AS 9100 • ISO 13485 • ISO 9001:2000 • TS 16949
Service Categories: Blasting

A manufacturer of abrasive blast cleaning equipment. Cardinal Parts and Equipment also buys and sells used blast equipment & refurbished blast equipment. We also supply replacement parts for the blast cleaning equipment industry.


Service Categories: Machining - Precision CNC • Machining - CNC Milling & Turning • Welding - MIG • Machining - Weldments

Providing wide ranging machining, welding and fabrication capabilities, CMF meets the needs of original equipment manufacturers. We provide reliable on-time delivery for production runs or one off parts.


Quality Certifications: ISO 2008
CR METAL PRODUCTS     Booth # 238
Service Categories: Fabricating - Sheet Metal • Powder Coating • Laser Cutting • Welding - Robotic • Screen Printing

A custom metal fabrication facility/contract manufacturer specializing in precision sheet metal fabrication, powder coated finishes, & silkscreening.


Quality Certifications: ISO 9001:2008
CRECOCAST     Booth # 245
Service Categories: Castings - Die, Zinc • Fasteners • Drilling & Tapping • Castings - Zinc

We produce small and miniature precision zinc die castings. We utilize state-of-the-art four slide technology to produce net shape, flash free, multi-cavity thin wall, precision zinc die castings.


Quality Certifications: ISO 9001:2008
CUSTOM PLASTICS INC.     Booth # 237
Service Categories: Extrusions - Plastic • Plastics - Injection Molding • Fabricating - Plastic

Partnering with OEMs worldwide from multiple industries, we manufacture plastic parts and assemblies that reduce overall part production costs, streamline the assembly and manufacturing process, and enhance end products with our value-added finishing services. We are a plastics injection molding and profile extrusion manufacturer with a full-service engineering team.


Quality Certifications: ISO 9001:2015
DAYTON ROGERS MFG. CO.      Booth # 117
Service Categories: Stampings - Metal • Fabricating - Sheet Metal • Assemblies - Stamped • Stampings - Short Run • Rapid Prototyping

"We provide metal forming solutions to industry." Modular tooling/progressive metal stampings, metal fabrication, welded assemblies, prototypes, drawn shapes, complete tool & die facility. All secondary operations. Four locations to serve you.


Quality Certifications: ISO 9001:2008 • AS 9100 • ITAR
DB ROBERTS     Booth # 101
Service Categories: Fasteners • Electronic Hardware • Assembly Hardware • Levers, Knobs & Handles • Masking

Since our inception, we have been focused on providing solutions for fastener applications in Sheet Metal Fabrication, Metalworking, and Industrial Electronics. Our "Superior Customer Service" and "Commitment to Excellence" have proven to be a winning formula fueling innovation and rapid growth year after year.


Quality Certifications: ISO 9001:2015 • AS 9120B
ELECTRA USA INC.     Booth # 507
Service Categories: Locks • Hinges • Gaskets, Seals, Washers & O-rings • Stainless Steel - Materials • Assembly Hardware

We produce Electronic Locking Systems, Commercial, Industrial and Heavy Duty locks, padlocks, hinges, handles, gaskets and accessories. Applications include generators, transformers, metal furniture, electrical panels, servers, telecommunication and communication cabinets, cars, trucks, recreational vehicles etc.


Quality Certifications: RoHS / REACH • ISO 9001: 2008 CERTIFIED
Service Categories: Assemblies • Machining - Precision CNC • Engineering & Technical Services • Machining - Production • Machining - Castings

EMP manufactures highly complex precision machined components and assemblies. EMP also designs and markets electric water pumps and oil pumps, electric fans and thermal management systems for multiple industries. EMP is a full-service provider of manufacturing and engineering solutions, focused on delivering value-added products and solutions to our customers.


Quality Certifications: TS 16949:2009 • ISO 9001
Service Categories: Prototypes - Plastic • Tooling - Plastic Injection Molding • Tooling - Models & Prototypes • Plastics - Low Volume • Molds & Moldmaking - Plastic

At The ERC, we believe that tooling costs should not stand in the way of developing great products. Our unique, inexpensive tooling solutions allow us to offer globally competitive pricing on plastic prototypes and custom injection molds - right here in the USA!


Service Categories: Springs - Coil • Springs - Flat • Wire Forming & Fabricating • Stampings - Fourslide • Stampings - Short Run

Manufacturer of custom springs, wire forms and metal forms. We utilize SPC systems, CNC coilers and experienced craftsmen to assure consistent quality. Design assistance and rush orders are welcome. Wisconsin Grand Manufacturer of the Year. We Quality Certify each process & provide a total Value-added supplier package. 10 piece minimum for custom spring and wire forms.


Quality Certifications: ISO 9001:2008 • ITAR CERTIFIED
Service Categories: Fasteners • Electronic Hardware • Adhesives • Assemblies - Electrical • Assembly Hardware

Our SAE AS9120 Registered Quality Management System and full service Quality Assurance facilities coupled with many years of technical sales experience and deep product line inventory ensure our commitment to total customer satisfaction. Together these make Hardware Specialty an unbeatable source for all your fastener and electronic component requirements.


Quality Certifications: SAE AS9120 • ISO 9001:2008 • ISO 14001 • MIL-STD-45662A
Service Categories: Plastics - Insert Injection Molding • Plastics - Injection Molding • Assemblies

HCP serves the automotive, medical device, consumer products, defense and various other industries with tight tolerance custom parts made from engineering and commodity grade resins.


Quality Certifications: ISO 9001:2015
Service Categories: Castings - Die • Tooling - Casting • Special Machinery - Design, Build & Rebuild

With experience since 1990 in die casting, we develop and manufacture zinc die cast components for multiple industries throughout the world and has grown from the tradition of a family business to become a leading source for quality die casting. From April 1st 2015 we are an independent company within the Huf Group.


Quality Certifications: ISO 14001:2004 • TS 16949:2009
Service Categories: Engineering & Technical Services • CAD Design Services • Finite Element Analysis - FEA • Special Machinery - Design, Build & Rebuild • Automation

We specialize in machine building, providing design and manufacturing services for custom robotic and automation systems. ICE - certified EDWOSB - can also fulfill your mechanical engineering needs including design, drafting, and analysis. Our team of experts work with you through every stage of the project, from concept to reality.


Quality Certifications: ASME Y14.5M 1994 • ISO 9001:2008
Service Categories: Grinding - Precision • Grinding - I.D. & O.D. • Grinding - Centerless • Grinding - Surface • Grinding - Carbide

Provides customer-centric solutions to the manufacturing, aerospace, and thermal spray coating industries. IPG offers a full variety of CNC Cylindrical, Centerless, Vertical Universal, and Surface Grinding services. Precision and Quality are the catalysts that drive our professional and experienced team to position all our customers toward success.


Quality Certifications: AS 9100D, ISO 9001:2008 • ROLLS ROYCE • BELL HELICOPTER APPROVED
KSM ELECTRONICS INC.     Booth # 413
Service Categories: Assemblies - Electronic • Assemblies - Cable • Wire & Cable Harnesses • Panels - Control

A global contract manufacturer. We produce custom cables, Wire harness assemblies, and Electromechanical/Box Builds. We work with world-class companies to bring products such as the latest GPS, Cockpit radios and medical technologies to market. We have three locations: Warrenville, IL; Tamarac, FL; and Metamoros, Tamaulipas, Mexico.


Quality Certifications: ISO 9001:2008 • UL & CSA • IPC 610 • SIX SIGMA
MAKUTA TECHNICS INC.     Booth # 420
Service Categories: Plastics - Micro Molding • Plastics - Two Shot Injection Molding • Molds & Moldmaking - Plastic • Prototypes - Plastic • Tooling - Plastic Injection Molding

Specializing in micro injection molding and micro mold tooling, Makuta Technics Micro Molding produces millions of zero-defect micro parts each month for customers in the medical, pharmaceutical, microfluidics, electronics/office automation and automotive industries.


Quality Certifications: 6 SIGMA • ISO CLASS 8 CLEAN ENVIRONMENT • ISO 9001:2015
Service Categories: 3D Printing • Jigs & Fixtures • Prototypes - Plastic • Rapid Prototyping • Tooling - Plastic Injection Molding

For over 65 years MasterGraphics has been a leading provider of Wide-format and 3D printing technology. MasterGraphics offers best in breed printing solutions from HP Jet Fusion 3D, Markforged, Evisiontec, HP Design Jet, HP Pagewide XL as well as Oce’. We view printing not merely as a function but as a method for conveying design intent.


NOBLE TOOL CORP.     Booth # 409
Service Categories: Gaging - Custom Engineered • Tooling • Tools, Dies & Fixtures • Machining - CNC Milling & Turning • Machining - Production

A custom design and manufacturer of precision gages, fixtures, tooling and short-run production parts. Our team can work from your designs or our concepts to build precision components from simple to complex. We will make sure that our customers will experience the measurable difference! We are AS9100C and ISO 9001 certified.


Quality Certifications: AS 9100 REV B • ISO 9000:2001
NOVATHANE     Booth # 340
Service Categories: Rubber - Polyurethane Molding • Polyurethane - Parts • Rubber Molding • Gaskets, Seals, Washers & O-rings • Polyurethane - Rollers

A specialist in the molding of urethane polymers. Common products include urethane bushings, v-rollers, and bearings, although we can create a custom molding solution to meet your specific needs and requirements. For inquiries please visit the company website at www.novathanedirect.com or call 419-877-3306.


NU-DI CORPORATION     Booth # 408
Service Categories: Wire & Cable Harnesses • Assemblies - Cable • Assemblies - Electronic • Cable & Wire Manufacturing

A family-owned business since 1976, Nu-Di Corporation is a custom manufacturer of Wire Harnesses, Cable Assemblies, PCB Assemblies, and other Custom Manufacturing Solutions. We are a preferred supplier in the Automotive Service Industry, and we strive to meet and exceed our customers' expectations from design aid through the entire manufacturing process.


PARK MFG. CORP.     Booth # 428
Service Categories: Wire & Cable Harnesses • Assemblies - Electromechanical • Assemblies - Electronic • Assemblies - Mechanical • Assemblies - Turnkey

An industry leader in high-quality wire harness, custom cable assembly, and electromechanical assemblies as well as turnkey box and panel builds for a variety of markets, including Automotive, Military, Medical, Industrial, Consumer, Recreational and Off Road. Our newly expanded 80,000 square foot facility showcases our commitment to quality and growth.


Quality Certifications: ISO 9001:2008 • CSA & UL APPROVED • DOD REGISTERED • RoHS
Service Categories: Shot Peening • Testing - Non-Destructive • Surface Finishing • Deburring - Tumble & Vibratory • Metal Finishing - Tumble & Vibratory Polishing

FAA Repair Station G89R878X & EASA Repair Station # EASA.145.6643 (Georgia) & KJIR272K & EASA Repair Station # EASA.145.4559 (Connecticut). Major customer approvals: Boeing, Lockheed, Gulfstream, Pratt & Whitney, GE Aviation, GE Power Systems, Honeywell & Sikorsky.


Quality Certifications: AC7004 • NADCAP: MPI, FPI
Service Categories: Safety Products & Components

We offer the full line of patented Mighty Line floor tapes and 5s floor markings as well as custom printed safety floor signs designed to mark warehouse floors for safety compliance. Our easy peel and stick materials are an excellent alternative to painting warehouse floor markings.


R & S PLATING INC.     Booth # 526
Service Categories: Metal Finishing - Electroplating • Metal Finishing - Chrome Plating • Metal Finishing - Passivating • Metal Finishing - Zinc Plating • Surface Finishing

A family owned small business since 1946, R&S Plating specializes in Hard Chrome and plating to manufacturers' specifications.


Quality Certifications: AMS 2406 • AMS 2418 • AMS QQP-416 • AMS 2700
Service Categories: Plastics - Injection Molding • Plastics - Extruded Profiles • Plastics - Insert Injection Molding • Tools, Dies & Fixtures • Pad Printing

Recto Molded Products, a custom thermoplastic injection molder established in 1919 with 26 molding presses from 33 to 500 Ton. Legacy Extrusions, a custom profile extruder since 1996 with 6 extrusion lines. Assembly, decorating, 3D Printing and Packaging Capabilities. Engineering and Design assistance. No volume too small or too large.


Service Categories: Plastics - Injection Molding • Plastics - Insert Injection Molding • Plastics - Two Shot Injection Molding • Plastics - In Mold Labeling & Decorating • Plastics - Heat Sealing & Welding

We use our Flexible Thinking in the areas of Design, Injection Molding, Assembly and Testing to create new and cutting edge solutions to your most complex problems. Our Flexible Design helps streamline your products and logistics. We seal the deal with Flexible Delivery to get your product out the door on time and to the right location.


Quality Certifications: ISO 9001:2008 • TS 16949
Service Categories: Rubber Molding • Gaskets, Seals, Washers & O-rings • Fluid Power • Urethanes - Molded/Extruded • Silicone / Rubber - Liquid Injection Molding

We are a category leader in the design, sourcing & delivery of precision-molded rubber parts such as o-rings, seals & custom shapes for critical and demanding applications. With over 100 combined years of experience, we provide an unparalleled strategic sourcing network for our customers.


Quality Certifications: NSF • FDA • UL LISTED
SHOPTECH     Booth # 411
Service Categories: Software For Job Shops & Manufacturers

The provider of the E2 Shop System and the E2 Manufacturing System. E2 is trusted by over 8,000 shops all across North America. The E2 Shop System is for job shops and make-to-order manufacturers, while E2 Manufacturing is designed for the highly repetitive manufacturer.


SMALLEY     Booth # 131
Service Categories: Snap Rings & Retaining Rings • Springs - Coil • Springs - Wave • Springs - Flat • Fasteners

We are the exclusive manufacturer of the industry-leading Spirolox® Retaining Rings, an innovative design that features a no gap, 360° retaining surface without protruding ears to interfere with mating components. We are also the originator of Crest to Crest® Wave Springs which save up to 50% of space compared to conventional coil springs.


Quality Certifications: ISO 9001 & ISO 13485 • IATF 16949 • AS 9100 • ISO 14001
THE KELLY GROUP     Booth # 527
Service Categories: Fabricating - Steel • Laser Cutting • Welding & Weldments • Machining • Powder Coating

We have five metal fabrication facilities across four states and provide a range of services as a general contractor. The ISO-certified Lafayette facility — equipped with a laser burn table, robotic welder and more — fabricates products such as weldments, enclosures, panels, platforms, ladders, handrails, carts, racks, bins and assemblies.


Quality Certifications: ISO 9001-2008 • ASME U / PP / R STAMPS • WELDING (AWS)
Service Categories: Engraving • Laser Engraving • Stampings - Steel Marking • Laser Marking • Pad Printing

Phister Equipment with Telesis Marking Systems, is the leader in Direct Part Marking (DPM) Technologies. Telesis has been supplying the Automotive, Aerospace and Industrial markets with durable, fast, and innovative part marking systems for more than 40 years. Telesis is known for its industry leading line of PINSTAMP, SCRIBE and LASER marking and engraving systems.


Service Categories: Prototypes - Machining • Prototypes - Fabrication • Machining - CNC Milling & Turning • EDM • Welding & Weldments

Engineering prototypes & low volume production for precision machined parts, machined & formed combinations & precision fabrications, state-of-the-art laser cutting & water jet cutting, laser marking, conventional & 5 Axis CNC machining, precision CNC turning & Swiss turning, wire & sinker EDM, press brake forming, welding. Coordinate measuring machines for inspection. Contact Harold A. Brown.


Quality Certifications: ISO 9001:2015 • AS 9100D
ULTIMAKER - DESIGN BOX 3D     Booth # 418
Service Categories: 3D Printing • Rapid Prototyping • Rapid Prototyping - Equipment

Ultimaker and DesignBox 3D share the vision to make 3D printing accessible to all. It is why all of our desktop printers are extremely quiet, fast, accurate, reliable and effortless to use, embraced by professionals and novices alike. Ultimaker is one of the most successful and reliable open source 3D printing companies in the world.


Service Categories: Stampings - Metal • Stampings - High Volume • Stampings - Progressive Die • Stampings - Deep Drawn Shells • Stampings - Ferrous & Non Ferrous

A world class contract manufacturer supplying customers with turnkey solutions to stampings from prototype to production worldwide. Presses from 32 - 600 tons of capacity, feed lines up to 60" wide and 40,000 lbs. Value added features include in-die tapping & nut/stud insertion, assembly and welding. IATF 16949 Certified. Manufacturing At Its Finest!


Quality Certifications: IATF 16949
Service Categories: Machining • Machining - Precision CNC • Machining - Robotic • Machining - Multi Axis • Machining - Castings

Since 1999, Velocity Machine has been providing machining, mechanical assembly, supply chain management, inventory programs, packaging solutions to OEM clients worldwide. We currently serve many different industries. Our Quality Management System is ISO 9001:2015 Certified and TS 16949 Compliant. We are also ITAR Compliant, DOD Approved, AIAG Compliant and have our FFL.


Quality Certifications: ISO 9001:2015 • ITAR • AIAG/AWS • FEDERAL FIREARMS LICENSE - FFL
WM BERG     Booth # 516
Service Categories: Gears • Gears - Worm • Sprockets & Chains • Assemblies • Timing Pulleys & Belts

For 50 years, customers have been relying on Berg's engineering services and staff of specialists to provide technical assistance with their precision components design and product application requirements. We continuously strive to provide customers with solutions that fit their needs, on-time. Berg is a division of Rexnord Industries LLC.


Quality Certifications: ISO 9001:2008 CERTIFIED • RoHS • ITAR
WORLDWIDE FOAM LTD.     Booth # 403
Service Categories: Extrusions - Plastic Sheet

We were founded with a relentless focus on providing XLPE customers with the product they need, when they need it. Short lead times on buns and sheets as well as the widest range of sizes and densities available. Worldwide Foam, Ltd. ensures that our customers never have to worry about having the product they need.


Quality Certifications: ISO 9001:2008
XACT WIRE EDM CORP.     Booth # 136
Service Categories: EDM - Wire • EDM - Small Hole Drilling • EDM • Machining - Production • Laser Marking

We specialize in providing cost effective wire EDM & high speed small hole EDM services to customers in the defense, medical, aerospace, electronics, energy, automation, robotics, MIM, PM & AM, & the metal machining & tooling industries. We have 45 wire EDM machines, 7 high-speed small hole machines & laser part marking. Locations in Waukesha, WI & Cary, IL. ISO 9001:2015


Quality Certifications: ISO 9001:2015
3D MACHINE INC.     Booth # 322
Service Categories: Machining - CNC Milling & Turning • Waterjet Cutting - Metal • Screw Machining - Swiss/CNC Swiss • Assemblies • Laser Machining

A complete contract manufacturer offering CNC Machining, Waterjet, Assembly, Swiss Turning and Laser, and Supply Chain Management solutions. Focused on Lean Six Sigma continuous improvement methods to provide the lowest cost to our customers.

Quality Certifications: ISO 9001:2015
ABATEK (AMERICAS) INC.     Booth # 339
Service Categories: Rubber - Compression Molding • Gaskets, Seals, Washers & O-rings • Assemblies - Electromechanical • Switches - Electrical • Switches - Membrane

Manufacturer of Human Machine Interface devices of all types including rubber keypad, membrane overlays & complete switch sub-assembly. For information please contact Tim Elledge 770-329-6519 or TIM.ELLEDGE@ABATEK.COM.

Quality Certifications: ISO 9001 • TS 16949
Service Categories: Perforating - Metals • Fabricating - Sheet Metal • Fabricating - Stainless Steel • Fabricating - Aluminum • Fabricating - Steel

We are a leading ISO 9001:2008 certified metal perforator and precision sheet metal fabricator. We've served nearly all industries across North America over the past 75 years. We specialize in manufacturing simple to complex components from perforated sheet, coils, and blanks to perforated/fabricated screens, guards, grilles, assemblies, and enclosures.

Quality Certifications: ISO 9001:2008 • # 97-112 CERT
AERO METALS INC.     Booth # 214
Service Categories: Castings - Investment • Castings - Ferrous • Castings - Non-Ferrous • Castings - Stainless Steel • Castings - Steel

High integrity investment casting, net & near net shapes, thin wall, ferrous & non-ferrous components at the lowest total cost. Creative engineering analysis, secondary machining, Just-in-time delivery. Complete in-house tool & die shop, CAD/CAM tooling, and exacting control in achieving dimensional tolerances as specified. 16 Machining centers, drilling, tapping, impact forming, heat treating, sub-assembly of components. Quality craftsmanship & superior customer service.

Quality Certifications: ISO 9001:2015 • NADCAP • SPC
AFC TOOL CO. INC.     Booth # 521
Service Categories: Tools, Dies & Fixtures • Special Machinery - Design, Build & Rebuild • Molds & Moldmaking - Metal • Stampings - Metal • Machining - CNC Milling & Turning

We provide quality and valued products in the design and manufacture of Custom Tooling Solutions including machined components, Special Machines, Jigs & Fixtures, Gauges, Molds & Stampings. Dayton Precision Aerospace Inc. is the manufacturer of the highest quality flight hardware and components. Visit us at www.dayaero.com

Quality Certifications: AS 9100D, ISO 9001:2015
AFCO INDUSTRIES     Booth # 341
Service Categories: Extrusions - Aluminum • Fabricating - Aluminum Extrusions • Metal Finishing - Painting • Metal Finishing - Anodizing • Assemblies - Turnkey

Through it's aluminum division, AFCO supplies aluminum extrusions and fabricated components to some of the most recognized names in manufacturing and solar products. A vertically integrated producer, AFCO enjoys a reputation for innovative design and utilizes the latest technology for precision fabrication of aluminum parts. AFCO is also an employee owned company.

Quality Certifications: AAMA • ASTM B221 • MIL-A-8625
Service Categories: Wire & Cable Harnesses • Assemblies - Electromechanical • Assemblies - Electrical

A contract manufacturer of wire harnesses, cable assemblies, and electro-mechanical assemblies. Servicing the Construction, Turf, Off-Road, Industrial & Agriculture markets as well as other related industries.

Quality Certifications: ISO 9001:2008 • UL APPROVED • CSA APPROVED
ALLIED TOOL & DIE INC.     Booth # 345
Service Categories: Stampings - Ferrous & Non Ferrous • Stampings - Metal • Stampings - High Volume • Stampings - Progressive Die • Tools, Dies & Fixtures

We specialize in high quality precision and custom metal stampings. Industries we serve: Automotive, Power Equipment, Medical, Consumer Goods, Aerospace, Industrial, Lawn & Garden. Many value added services. OFF SHORE PRICING / ONSHORE RELIABILITY.

Quality Certifications: ISO 9001:2015
Service Categories: Metal Finishing - Anodizing • Metal Finishing - Hard Coating • Metal Finishing - Electroplating • Metal Finishing - Dry Lubrication • Metal Finishing - Alodining

Type II & Type III Sulfuric Anodizing of Aluminum alloy. Specializing in Type III Hardcoat anodize. Tumbling, blasting, Chem-Film (Alodine), EverLube products and PTFE coatings.

Quality Certifications: ISO 9001:2008 • FFL, MIL-C-5541 • MIL-A-8625 • MIL-A-8625 III
Service Categories: Electronics - New Product Development • Assemblies - Electronic • Wire & Cable Harnesses • Assemblies - Printed Circuit Boards • Embedded Devices

Design and manufacture industrial electronic control systems including printed circuit board assemblies and wire harnesses.

Quality Certifications: ISO 9001:2015
AMPG INC.     Booth # 518
Service Categories: Fasteners • Machining - CNC Milling & Turning • Machining - Precision CNC • Machining - Stainless Steel • Screw Machining - Swiss/CNC Swiss

A privately owned, closely held, family business that was started in 1987. AMPG is a USA manufacturer of hard-to-find fasteners, architectural and industrial components and custom run items; our philosophy is simple: To provide unparalleled customer service, produce beautiful, precise fasteners and parts, and keep inventory levels high to ship when you need it.

Quality Certifications: ISO 9001:2015
Service Categories: Springs - Coil • Springs - Flat • Springs - Wave • Assemblies • Stampings - Fourslide

Custom manufacturer of springs, wire forms and formed metal products. Our customers are in the automotive, firearm, knife, sporting goods, electronic, medical, dental and motorcycle suspension products industries, worldwide. We work with our customers from design and prototyping to supplier managed inventory programs.

Quality Certifications: ISO 9001:2015 • IATF 16949:2016
ANSCO MACHINE     Booth # 427
Service Categories: Machining - CNC Milling & Turning • Machining - Multi Axis • Machining - Large Parts • Machining - Precision CNC • Machining - Castings

A state-of-the-art ISO9001 certified full-service contract machine shop specializing in milling and turning up to 100" (2540 mm) diameters. We work with castings, forgings, bar, and plate in both high volume production and small lots in a wide variety of materials from carbon and alloy steels through ductile and grey irons to aluminum to exotics.

Quality Certifications: ISO 9001:2008 • MIL-I-45208A
API ALLIANCE     Booth # 532
Service Categories: Assemblies - Electromechanical • Assemblies - Printed Circuit Boards • Assemblies - Turnkey

A manufacturer of custom electronics, electronic controls, and electro-mechanical assemblies. Since 1994, API Alliance has been providing our customers with quick-turn prototypes to complete electronic solutions, including turnkey PCB assembly. We offer a full array of services including engineering and project management.

ARC-TRONICS INC.     Booth # 307
Service Categories: Assemblies - Electronic • Assemblies - Electromechanical • Assemblies - Printed Circuit Boards • Assemblies - Turnkey • Prototypes - Electronic

We are a full-service Electronic Manufacturing Services (EMS) provider for turnkey products in printed circuit board assembly, cable/harness assembly, and complete box build or higher level integration. The company is ISO 9001:2008, ISO 13485:2003, and AS9100 Rev. C certified. Arc-Tronics is also an ITAR registered company.

Quality Certifications: ISO 9001:2008 • AS 9100 REV C • ITAR • ISO 13485:2003
BAKER MFG. CO. LLC     Booth # 514
Service Categories: Castings - Gray Iron • Castings - Ductile Iron • Castings - Sand

We have a reputation for high-quality casting products, blending the experience and technical skills of our craftsmen and the technology of today to serve the gray and ductile iron casting needs of our customers.

Quality Certifications: ISO 9001:2015
BARE BOARD GROUP     Booth # 107
Service Categories: Fabricating - Printed Circuit Boards • Printed Circuit Boards - Aluminum Clad • Circuits - Flexible • Prototypes - Fabrication • Prototypes - Electronic

Prototype through production, BBG is dedicated to providing quality PCB's built domestically & offshore. Rigid, Rigid Flex, Flex & Metal Clad PCB's. ITAR Registered (Domestic & Offshore), Military and Aerospace production. Specializing in RF; Medical; LED Lighting, Automotive and ITAR applications. BBG is also WEE, UL and RoHS Compliant and a Minority Business Enterprise.

Quality Certifications: ITAR • ISO 9001:2008 • TS 16949 • ISO 14001
BASTECH INC.     Booth # 517
Service Categories: 3D Printing • Rapid Prototyping • Machinery Sales & Services - New & Used • Molds & Moldmaking - Metal • Castings - Investment

We are an Additive Manufacturing Service Bureau and Reseller of Leading 3D Printing Equipment and Design Software. We offer 3D Printers, Scanners, Haptic Devices, Design and Inspection Software as well as utilize Additive technologies to design and produce rapid prototypes, investment casting patterns, tooling, and low-volume production for industries worldwide.

BEGOUN INC.     Booth # 220
Service Categories: Screw Machining - Swiss/CNC Swiss • Stampings - Metal • Stampings - Fourslide • Springs - Coil • Cold Heading - Cold Forming

Utilizing over 30 manufacturing partners, with hundreds of fabricating capabilities, we are able to provide you with virtually all of your outsourced, custom metal & plastic fabricated requirements. We also have the facilities to stock your parts in our warehouse & ship them as needed.

Service Categories: Fasteners • Cold Heading - Cold Forming • Assembly Hardware

Your one-stop cost effective partner dedicated to quality & on-time delivery. BCEPI specializes in custom engineered products from cold-formed to assembled components. Over 34 years of experience handling challenging projects allows us to support every step from product engineering to flexible release scheduling.

Quality Certifications: ISO 9001:2015 REGISTERED
BLUE GRASS MFG. CO.     Booth # 509
Service Categories: Machining - CNC Milling & Turning • Assemblies • Inspection Services • Welding - MIG • Welding - Resistance

Established in 1961, BGM is a highly diversified manufacturer with exposure to a great diversity of customers and industries. The business is organized primarily around machining, assembly and sorting activities. A large part of the facility is dedicated to CNC machining; including some large mills, and lathes. We also perform various welding operations.

Quality Certifications: ISO 9001:2008 • 6 SIGMA • DOD REGISTERED • UL RECOGNIZED
Service Categories: Aluminum - Materials • Extrusions - Aluminum • Fabricating - Aluminum Extrusions • Machining - Aluminum • Metal Finishing - Anodizing

We are a leader in aluminum extruding, fabricating and anodizing. We are recognized for providing superior quality fabricated aluminum extrusions along with exceptional customer service. Our highly trained employees are committed to provide value to customers for their custom aluminum extrusions, specialty fabrication or direct job-shop anodizing requirements.

Quality Certifications: ISO 9001 • ISO 14001 • ISO/TS 16949
Service Categories: Die-Cutting • Gaskets, Seals, Washers & O-rings • Die-Cutting - Felt, Cork & Rubber • Prototypes - Rubber • Prototypes - Plastic

A 70-year-old, 3rd generation company offering traditional die cutting and CNC cutting of gaskets, seals, and custom shapes. Specializing in quick turn around & JIT programs. We cut a variety of materials for the medical, electronics, defense and other industries. Rapid prototyping and R&D in addition to lowered set-up costs for small and medium production runs.

Quality Certifications: ISO 9001:2008
Service Categories: Switches - Membrane • Labels, Tapes & Decals • Screen Printing • Nameplates, Dials & Panels • Prototypes - Electronic

For over 25 years Butler Technologies has been providing screen/digitally printed Membrane Switches, Overlays & Labels. Additional products and processes include printed electronic components, dials & gauges, rubber keypads & laser cutting service. Please ask about our Rapid Prototype Program.

Quality Certifications: ISO 9001 • UL APPROVED • ITAR • CSA APPROVED
C&T ENGINEERING INC.     Booth # 440
Service Categories: Plastics - Injection Molding • Plastics - Insert Injection Molding • Plastics - CNC Machining • Molds & Moldmaking - Plastic • Assemblies

Specializing in molding of plastic injection molded parts, mold building and all types of custom machining.

Quality Certifications: ISO 9000:2008 • UL APPROVED • DOT CERTIFIED • UL REGISTERED
CANON VIRGINIA INC.     Booth # 342
Service Categories: Molds & Moldmaking - Plastic • Tooling - Plastic Injection Molding • Tooling

We specialize in complex molds, such as thin wall closures with living hinges, multi-cavity unscrewing molds & multiple styles of overmolded inserts. Our goal is to deliver robust molds that meet your volume, achieve peak efficiency, and ensure reliability & durability. To learn more about our precision mold making services, visit www.cvi.canon.com/mfg.

Quality Certifications: ISO 14001 • ISO 9001 • ISO 13485 • ITAR, EAR
Service Categories: Extrusions - Aluminum • Metal Finishing - Anodizing • Fabricating - Aluminum Extrusions • Powder Coating

Custom aluminum extrusions; brite dip, color & architectural hard coat anodizing & powder coating, complete fabricating capabilities.

Service Categories: Industrial Design Services • Engineering & Technical Services • 3D Printing • Tooling - Plastic Injection Molding • Plastics - Injection Molding

Ingenuity, speed, and collaboration; that's how we cultivate vital intellectual property. With over 15 years of experience in industrial design, engineering, prototyping, and manufacturing - we are the experts at bringing products to life. Discover your market potential with integrated solutions from Catalyst Product Development Group.

Service Categories: Software For Job Shops & Manufacturers

We sell, implement, and support ERP software. CCSS also provides Business Process review as well as custom programming.

Service Categories: Fabricating - Foam • Cases - Custom • Packaging • Plastics - Flexible Foam • Die-Cutting

Fabrication of flexible & rigid foams for the automotive, electronic, military & medical industries. Custom package design. Laminating: pressure sensitive, hot melt, water base, die cutting. Foam conversion & Industrial Filters. Tool Kitting for lean manufacturing or 5-S programs, also component trays.

Service Categories: Coatings - E Coat • Coatings - Metal • Coatings - Plastic

Offers speciality cathodic and anodic electro-coat products. Clearclad can be a stand-alone product providing performance, protection and in the color you require. It can be used in conjunction with existing plating/anodizing finishes or as a a replacement. Clearclad has the ability to formulate e-coats with dry film lubricants and nano-ceramics.

Quality Certifications: ISO 9001:2008
Service Categories: Rapid Prototyping • CAD/CAM Software • CAD/CAM Training • 3D Printing

From SolidWorks 3D CAD Software & Training, Stratasys 3D Printers to Creaform 3D Scanners CATI is able to create a competitive advantage for manufacturing clients by leveraging an industry-experienced team & leading technology solutions.

Service Categories: Plastics - Injection Molding • Plastic Coatings - EMI/RFI • Tooling - Plastic Injection Molding • Molds & Moldmaking - Plastic • Prototypes - Plastic

Located in central OH (minutes from Port Columbus International Airport), CP Technologies provides design support, Prototyping Services, Tooling, Injection Molding, Part Decoration, and Contract Assembly services to a variety of industries worldwide. Hours of operation (Office: 8A-4P M-F, Mfg: 24hr M-F)

Quality Certifications: ISO 9001:2015
Service Categories: Metal Finishing - Painting • Plastics - Painting • Shielding - EMI/RFI • Powder Coating • Pad Printing

Contract production painting (Metal/Plastics) - Powder, Liquid, CARC, Teflon, and EMI/RFI Shielding. Chemical pre-treatment including RoHS Chromate, Blasting, Pad Printing, Silk-Screening, Mask Making, High-Bake capability and Blister Packaging.

Quality Certifications: ISO 9001:2015 • CONTROL PLANS • FEMA • FLOW CHARTS - SPC
DA/PRO RUBBER INC.     Booth # 246
Service Categories: Rubber Molding • Plastics - Injection Molding • Silicone / Rubber - Liquid Injection Molding • Rubber To Metal Bonding • Rubber - Compression Molding

5 facilities for compression/injection molding - high-quality custom rubber, TPE, & plastic components molded to precision tolerances such as diaphragms, seals, connectors, molded shapes, rubber to metal parts for medical device, electronic & aerospace industries. Class 10,000 cleanroom - chemists & engineers assist in optimal moldability. sales@daprorubber.com

Quality Certifications: ISO 9001
DECO PRODUCTS CO.     Booth # 114
Service Categories: Castings - Die, Zinc • Castings - Die • Castings - Zinc • Metal Finishing - Electrostatic Painting

Functional precision zinc die castings, all zinc alloys 2, 3, 5, 7 and ZA-8; fractional ounce to 8 lbs. In-plant powder coatings. Additional plating processes, production machining, assembly and quality systems. USA made for any industry including transportation, HVAC, fluids, tools, fasteners, window/door, furniture, medical, military, etc.

Quality Certifications: ISO 9001:2015 • ITAR
Service Categories: Machining • Machining - CNC Milling & Turning • Machining - Precision CNC • Machining - Swiss Laser & CNC Swiss • Machining - Precision Cut-Off

We provide precision components for numerous industries including fork trucks, air cylinders, firearms, security locks and other various industries. Our capabilities consist of multiple Vertical CNC Mills, CNC Lathes, Surface Grinders, Manual Mills, Screw Machines, Swiss machines and other various metal working machines.

Quality Certifications: ISO 9000:2008
DUDEK & BOCK SPRING - USA & MEXICO     Booth # 206
Service Categories: Springs - Coil • Wire Forming & Fabricating • Stampings - Fourslide • Springs - Flat • Assemblies

World class manufacturer of key component springs, wireforms, counterbalance springs, welded assemblies (inc. robotic welded assemblies), welded rings & 4-slide metal stampings in automotive, appliance, electronic, agricultural & recreational markets. Plants in Chicago and Saltillo.

Quality Certifications: ISO/TS 16949
DUFFIN MFG.     Booth # 530
Service Categories: Machining - Production • Screw Machining - Multi Spindle • Machining - Precision CNC • Machining - Conventional CNC • Machining - CNC Milling & Turning

High and low volume machining facility specializing in turned parts made from bar stock. Equipment includes multi-axis CNC lathes, multiple spindle & single spindle screw machines, and various secondary operations. Extensive use of pull systems incorporated to support JIT delivery.

Quality Certifications: ISO 9001-2008 • ISO 14001-2004 • OHSAS 18001:2007
Service Categories: Machining - Precision CNC • Machining - Miniature Precision • Machining - Exotic Materials • Screw Machining - Swiss/CNC Swiss • Plastics - Screw Machining

DM Squared is a contract manufacturer of small precision machined parts. We have 15 Swiss Style Turning Centers, a 5-Axis Machining Center with a Robotic loading system & all necessary metrology support equipment.

Quality Certifications: ISO 9001:2015 • AS 9100D • ISO 13485:2016
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Turnkey • Surface Mount Technology - Assembly • Assemblies - Electronic • Assemblies - Electromechanical

We've been providing Legendary Service to our customers for over 35 years. Founded in 1980, we provide a full range of electronic manufacturing services (EMS) to original equipment manufacturers (OEMs) in the industrial, commercial, medical, energy and HVAC markets.

Quality Certifications: ISO 13485:2003 • ISO 9001:2008 • ITAR
EMBREE MACHINE INC.     Booth # 442
Service Categories: Machining - CNC Milling & Turning • EDM - Wire • Machining - Precision CNC • Machining - Production • Plastics - CNC Machining

A precision machining company in Southern IN. Embree Machine Inc.'s extensive machining background coupled with advanced software gives us the ability to meet your precise quality and delivery needs. We have Solid Works, Solid Works inspection, E2 Shop software and Esprit Cam software capable of 3-5 axis milling, multi-task turning, CNC wire EDM.

Service Categories: Castings - Investment • Castings - Steel • Castings - Non-Ferrous

Ferrous & non-ferrous investment castings. In-house capabilities include: toolroom, complete N.D.T. and heat treating. Email us your RFQ at info@epcast.com

Quality Certifications: MIL-45208 • AS 9100 • ISO 9001
EPILOG LASER     Booth # 346
Service Categories: Lasers • Laser Cutting • Laser Engraving • Laser Marking • Bar Coding

An industry leader in design of laser engraving, cutting & marking systems, manufacturers of the Epilog Zing, Mini, Helix, Fusion M2, FiberMark, and G2 Galvo series of laser systems.

Quality Certifications: ANSI STANDARDS • IEC • CE • CFR 21
EVANS     Booth # 110
Service Categories: Stampings - Deep Drawn Shells • Eyelets & Drawn Shells • Stampings - Metal

Conventional multi-station transfer presses. Custom designed progressive type presses. Thin-walled drawn metal shells, tubular parts and precision metal stampings.

Quality Certifications: ISO 9001:2015
Service Categories: Tube Bending & Fabricating • Wire Forming & Fabricating • Tubular Parts - Die Swaged • Welding - Resistance • Welding - Robotic

With 72 years in business, specializing in tube bending (mandrel and CNC 3/8"- 2"), steel rings-wire (0.092"- 1"), tubular rings (0.25"- 2") and press work. Hole piercing and end forming available. In-house tool shop. Our ISO 9001:2015 registration means a commitment to continuous improvement, quality and service. 100% employee owned and operated.

Quality Certifications: ISO 9001:2015 • PPAP's
FAB FORM     Booth # 410
Service Categories: Stampings - Short Run • Fabricating - Steel • Machining - CNC Milling & Turning • Fabricating - Sheet Metal • Powder Coating

A turn-key Metal Stamping, Fabricating and Machining company founded in 1978, specializing in Laser Cutting, CNC Punching, Metal Stamping, CNC Bending, Welding, Vertical and Horizontal Machining, Forming and Powder Coating. We offer complete manufacturing solutions from design and development to full production.

Quality Certifications: ISO 9001:2008
FAB MASTERS CO. INC.     Booth # 302
Service Categories: Extrusions - Aluminum • Fabricating - Aluminum Extrusions • Machining - Aluminum • Welding - TIG Aluminum • Heat Sinks

Suppliers of complete precision-machined parts from custom aluminum extrusions with finishing available. Totally accountable from extrusions to complete finished part. All production welding & custom fabrications are built to customer or military specifications. Our welders are AWS certified in several alloys, Mig & Tig.

Quality Certifications: ISO 9001:2015 • ITAR REGISTERED • VOSB • AWS
FISHER UNITECH     Booth # 240
Service Categories: 3D Printing • Prototypes - Fabrication • Jigs & Fixtures • Prototypes - Plastic • Rapid Prototyping

Provides solutions for all phases of the design process including industrial design, 3D CAD, FEA, CAM, reverse engineering, design automation, rapid prototyping and PDM/PLM.

FLINT CLIFFS MFG.     Booth # 406
Service Categories: Fabricating - Steel • Laser Cutting • Machining • Welding & Weldments • Assemblies

A full service metal fabrication facility complete with a paint line capable of wet spray or powder coat. Flint Cliffs Mfg. has been manufacturing metal products in this location for over 107 years! Flint Cliffs prides itself on quality and on time delivery. Parts large and small in high volume or prototypes we can handle it all.

Quality Certifications: ISO 9001-2015
FPM HEAT TREATING     Booth # 337
Service Categories: Heat Treating • Heat Treating - Vacuum Carburizing LPVC • Cryogenic Treatment • Brazing • Quality Assurance

FPM is the leading provider of heat treat processes serving the Midwest Region for almost 40 years. FPM has grown to be one of the nation’s largest metal treating companies offering a wide range of processes serving the Aerospace, Automotive, Building Products, Construction, Tool and Die and other great industries from our Four locations.

Quality Certifications: ISO 9001:2008 • NADCAP ACCREDITED • CQI-9
Service Categories: Screw Machining - Escomatics • Screw Machining - Swiss/CNC Swiss • Plastics - Injection Molding • Stampings - Fineblanked • Assemblies

Since 1942 Fraen has been a one stop high quality manufacturer of specialized Precision Swiss-Type Machined, Injection Molded & Metal Stamped components. We fully service our customers from our 3 US based manufacturing locations in MA & TN. We offer over 300 single spindle CNC and CAM driven Swiss-type machines. In-house mold design & fabrication. Automatic assembly.

Quality Certifications: ISO/TS 16949:2009 • ISO 9001 • ISO 14001
Service Categories: Gaskets, Seals, Washers & O-rings • Rubber Molding • Prototypes - Rubber • Extrusions - Rubber

For over 60 years, we have consistently provided superior technical solutions specializing in O-rings, seals, custom PTFE and molded shapes with the lowest total cost of ownership. Creating competitive advantages for our customers in their products or markets is what makes Gallagher "The Seal Specialist". 2nd location: 21 Deer Park Dr., East Longmeadow, MA, Ph: 800-356-0061

Quality Certifications: ISO 9001:2008 • ISO 14001-2004
GIC LTD.     Booth # 234
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Electronic • Assemblies - Electromechanical • Assemblies - Turnkey • Mechanical & Electronic Design

Specializing in Turnkey Contract Electronic Manufacturing that includes: Electronic Assembly-Mixed-SMT-BGA-Micro-BGA; Electro-Mechanical Box Build; Electronic Circuit Design; Firmware Development; Mechanical Design; Full Functional & In-Circuit Testing; Chip Programming; Encapsulation/Conformal Coating.

Quality Certifications: ISO 9001:2008 • ISO 13485:2003 Medical • ANSI/ESD 20.20 • UL, CSA, CE & ITAR
GOPROTO INC.     Booth # 318
Service Categories: 3D Printing • Machining • Tooling - Plastic Injection Molding • Tooling - Casting • Prototypes - Models

Delivering turnkey plastic and metal part manufacturing solutions including industrial design model making, rapid prototyping, additive manufacturing, cast urethane, CNC machining, rapid sheet metal, rapid injection tooling, production parts (injection molding, stamping, die-cast, sheet metal), and part finishing to complete your product.

Quality Certifications: ISO 9001
Service Categories: Plastics - Extruded Profiles • Extrusions - Plastic

A North American custom profile extrusion company and a recognized international leader in thermoplastics profile design, engineering, processing and value-added manufacturing. We have over 40 years of experience helping our customers discover unique and innovative possibilities in plastic extrusion.

Quality Certifications: ISO 9001:2008
GRAPHICAST INC.     Booth # 121
Service Categories: Castings - Permanent Mold • Castings - Graphite Mold • Castings - Zinc • Castings - Non-Ferrous

Zinc alloy castings using unique graphite permanent mold process. Low cost graphite molds make this process ideal for low to medium quantities. Eliminate expensive CNC hog-outs, high tooling costs, and long lead-times. In-house design, mold building and precision CNC machining. Cosmetic and protective finishes available.

Quality Certifications: ISO 9001:2008
Service Categories: Castings - Aluminum • Castings - Sand & Shell • Castings - Sand

We are a leader in the production of aluminum castings. We are an ITAR compliant and AS9100 Certified facility. Our V-process delivers tight tolerances, thin walls and excellent surface finish. Further we're able to bring your project from model to production in just three weeks.

Quality Certifications: ISO 9001:2008 • AS 9100 REV D
HARRINGTON EMS     Booth # 242
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Electronic • Surface Mount Technology - Assembly • Rework & Repair - Electronic

Electronic Mfg. Services - We offer a wide range of services including: Surface Mount, Through-Hole, Mixed Technology, RoHS compliant/Lead Free, Conformal Coating, Electronic Assembly, Testing, Box Builds, Repair Depot, Supply Chain Management, Order Fulfillment and various Engineering Services. Our experience and dedication to our partners is second to none.

Quality Certifications: ISO 9001:2008 • ANSI/IPC-A-610 STANDARD
Service Categories: Honing • Measurement & Inspection • Plastics - CNC Machining • Machining - Swiss Laser & CNC Swiss

An ISO-13485, FDA registered company serving the orthopedic, aerospace, automotive, light industrial and racing industries with precision machined parts, instruments and implants. A portfolio of companies including an ISO -17025 metrology lab, ISO 9000 manufacturing and honing company. Capable of high and low volumes.

Quality Certifications: AS 9100 • ITAR • ISO 13485 • ISO 17025
Service Categories: Tube Bending & Fabricating • Laser Cutting • Cutting - Tube & Pipe • Welding & Weldments • Powder Coating

We are experts in tube bending & fabrication, providing innovative quality products & services. From robotic welding, to powder coat painting to LASER TUBE CUTTING to 12" diameter, our customers use our many services to get assemblies done well & done right. Ask us about our 5 axis laser. For a quote call Tim @ 919-258-3070.

Quality Certifications: ASTM - SAE • METRIC - JIS • CE AWS • ISO 9001-2000
Service Categories: Plastics - Injection Molding • Assemblies • Plastics - Insert Injection Molding • Molds & Moldmaking - Plastic • Prototypes - Plastic

Custom injection molding and assembly. We serve automotive, medical, defense, musical, consumer, and many other markets.

Quality Certifications: ISO 9000:2008 • UL CERTIFIED / ITAR REGISTERED • UL LISTED
Service Categories: Plastics - CNC Machining • Plastics - Sheet, Rod & Tube • Stampings - Progressive Die • Plastics - Screw Machining • EDM - Wire

Specializing in precision CNC machining, turning & die cutting of thermoplastics, thermosets, composites, films & fibre. Prototypes, Turnkey Assembly. Design & fabrication of specialty assembly and process tooling for the PCB industry including wire EDM.

Quality Certifications: ISO 9001:2008 • ITAR
Service Categories: Screw Machining - Swiss/CNC Swiss • Screw Machining - Escomatics • Machining - Miniature Precision

Precision machined components to 1.125" diameter. Complete secondary including: thread rolling, knurling, milling, tapping, drilling and slotting. For a Quote, email David at david.atwood@apextoolgroup.com.

Quality Certifications: ISO 9001:2015
Service Categories: Machining - CNC Milling & Turning • Machining - Production • Machining - Castings • Prototypes - Machining • Machining - Precision CNC

Established in 1919 and providing machine shop services to numerous customers in Illinois and throughout the Mid-West. Jacksonville Machine Inc. specializes in CNC machining, but also provides services such as manual machining, welding, grinding, fabrication and assembly.

Quality Certifications: ISO 9001:2008
Service Categories: Forgings - Aluminum • Castings - Brass • Castings - Stainless Steel • Machining • Forgings - Seamless Rolled Rings

Formed aluminum, copper, stainless components to wrought properties. Excellent anodizing response with high vacuum integrity. Custom alloys & complete finished machining to your specifications.

Quality Certifications: MIL-SPEC 45208 • ISO 9001:2008
K & S PRECISION METALS     Booth # 229
Service Categories: Tubing - Cold Drawn • Cutting - Tube & Pipe • Drilling & Tapping

Providing high quality brass, aluminum & copper tubing, rod, strips & sheets. Secondary operations include cut to length, draw to size, milling, tapping & threading. Low minimums & quick delivery.

KNOWLTON MFG. CO.     Booth # 328
Service Categories: Stampings - Progressive Die • Stampings - Deep Drawn Shells • Stampings - High Volume • Stampings - Short Run • Stampings - Metal

Providing Precision Engineered Stamped parts since 1935. We can produce short run, one of a kind parts and also high volume annual contracts. We can produce parts made out of CRS, HRP&O, aluminum, stainless and other materials. We have shearing, grinding and misc. welding as well as press brakes.

Service Categories: Plastics - CNC Machining • Plastics - Sheet, Rod & Tube • Prototypes - Plastic • Fabricating - Plastic

Specializing in precision plastic machined parts and a distributor of plastic sheet, rod, and tube. Konrady Plastics follows ISO9001 compliant standards.

Service Categories: Stampings - Progressive Die • Fabricating - Sheet Metal • Assemblies - Electromechanical • Welding - Robotic • Wire Forming & Fabricating

We are the world-class manufacturers of metal components for the Major OEM markets. We have presses from 30 to 400 tons. Specializing in short to long run stampings with a variety of globally competitive tooling options. Sheet metal fabrication up to .500" thick. We also provide WIRE FORMING capabilities with Round / Square wire .080 - .625 thick.

Quality Certifications: ISO 9001:2008
Service Categories: Castings - Die, Zinc • Castings - Zinc • Castings - Die • Tooling - Casting • Castings - Non-Ferrous

Manufacturer of precision Zinc die-castings. Specializing in Four-Slide Tooling Technology. Tight tolerances, thin walls, internal cast threads, secondary machining, assembly, product protective finishes. We have a fully equipped, on-site tool shop, offering complete tool builds, repairs and maintenance. Please submit RFQs to: mhetheriton@lakesidecasting.com.

Quality Certifications: ISO 9001:2015
LASER DYNAMICS INC.     Booth # 301
Service Categories: Fabricating - Sheet Metal • Laser Cutting • Machining - CNC Milling & Turning • Assemblies - Welded Contact • Fabricating - Steel

Precision Sheetmetal Fabrication & Assembly. A full service fabrication & assembly source. Our core competencies include flat & tube laser cutting, turret, forming, welding, hardware, machining, turning & finish. LDI's Team uses Job Boss ERP system to manage our capacities, material & product flow. We deliver quality parts on time at a competitive cost.

Quality Certifications: ISO 9001:2008
Service Categories: Plastics - Injection Molding • Tooling - Plastic Injection Molding • Assemblies - Electromechanical • Machining - Precision CNC • Machining - Castings

An integrated manufacturer of quality, custom injection molded components and highly engineered tooling. Laszeray provides customers with a full suite of value-added services.

Quality Certifications: ISO 9001:2015
LEE SPRING     Booth # 239
Service Categories: Springs - Coil • Springs - Flat • Springs - Wave • Stampings - Fourslide

Springs in stock ready to ship or made to your specifications. Large selection of stock Compression, Extension, Torsion, HEFTYTM Die, REDUXTM Wave, LeePTM Plastic Composite, MIL-SPEC, Belleville Washer, Battery and Constant Force Springs. Custom Springs, Stampings, Wire Forms and Fourslide design and manufacturing. Prototypes through large production runs.

Quality Certifications: ISO 9001 • RoHS / REACH • MIL SPEC AS24585 • MIL SPEC AS24586
Service Categories: Fabricating - Sheet Metal • Laser Cutting • Stampings - Short Run • Machining - CNC Milling & Turning • Welding - MIG

Sheet metal fabricating including laser cutting, punching, stamping, forming, welding and assembly. Specializing in stainless steel in addition to other metals. Full machine shop, including Swiss turn capabilities.

Quality Certifications: ISO 9001:2008
MALISH PLASTICS     Booth # 330
Service Categories: Extrusions - Plastic • Plastics - Extruded Profiles • Plastics - Sheet, Rod & Tube • Brushes • Fabricating - Plastic

Plastic Extrusion services, including heavy wall pipe/tube, flexible and rigid profile shapes in various configurations and resin options including PVC, ABS, HDPE, PC, HIPS, PP, TPR and TPU. Co-extrusions, Design assistance and In-House tooling capability. We can take your idea from design to reality.

MERCURY CORP.     Booth # 219
Service Categories: Fabricating - Sheet Metal • Metal Cabinets & Enclosures • Assemblies - Turnkey • Fabricating - Aluminum • Fabricating - Stainless Steel

AN INTEGRATED SOLUTION TO YOUR SUPPLY CHAIN - we build custom racks, frames, enclosures, plastics & stamping assemblies. CORE PROCESSES: Design, Metal Fabrication, welding of all types of metals, Plastic Injection Molding, Finishing, Turn-Key Assemblies & KAN BAN.

Quality Certifications: ISO 9001:2008 • ISO 13485 • AS 9100 • ITAR REGISTERED
MERRILL MFG. CORP.     Booth # 112
Service Categories: Wire Forming & Fabricating • Welding - Resistance • Baskets • Metal Finishing - Zinc Plating • Metal Finishing - Painting

We provide engineering assistance and manufacturing expertise for both stainless steel and basic welded wire & formed wire products with our exclusive MerriBrite zinc plating for your parts. Stainless steel specialty products. Complex welded assemblies.

Quality Certifications: ISO 9001:2008
METALLON INC.     Booth # 304
Service Categories: Stampings - High Volume • Stampings - Progressive Die • Stampings - Ferrous & Non Ferrous • Stampings - Metal

High volume precision stampings. Progressive dies run in presses up to 150 tons. Added value: welding, staking, tapping & assembly. Product design assistance, prototyping.

Quality Certifications: ISO/TS 16949 • ISO 9001 • ISO 14001
Service Categories: Springs - Coil • Stampings - Fourslide • Stampings - Metal • Springs - Flat • Stampings - Progressive Die

As a custom job shop, we build exclusively to your print design or specs. We produce Springs & Wire Forms in sizes .007 - .750, and manufacture a wide range of Stampings. We specialize in cost-effective, small and medium-sized runs, and have no minimums. We are proud to practice Lean Manufacturing to serve our broad and diverse customer base.

Quality Certifications: ISO 9001:2015
Service Categories: Plastics - Injection Molding • Fabricating - Foam

A Leading Midwest Supplier of Custom Injection Molding. Production capabilities include machine ranging in size from 75 to 2,000 tons, all with robotic technology and several with Market experience in automotive, heavy truck, building and construction, office furniture and many other types of OEM molding.

Quality Certifications: ISO 9001
Service Categories: Extrusions - Impact • Fabricating - Aluminum • Machining - Aluminum • Assemblies - Mechanical • Forgings - Cold

We are a leading manufacturer of aluminum impact extrusions for many different markets including automotive, defense, and electrical. Benefits include increased strength from cold working, uniform grain structure (no voids), and different wall and bottom thicknesses. We have in-house heat treatment and final CNC machining. We are ISO/TS 16949 & ISO 14001 certified.

Quality Certifications: ISO/TS 16949
Service Categories: Fabricating - Sheet Metal • Laser Cutting • Fabricating - Aluminum • Fabricating - Stainless Steel • Tube Bending & Fabricating

Metal Fabrication which includes Laser Cutting, Press Brake Forming, CNC Punch, CNC Tube Cutting and Bending, MIG/TIG, Resistance and Robotic Welding, Powder Coating and numerous secondary support operations.

Quality Certifications: ISO 9000:2008 • 5S
Service Categories: Castings - Ductile Iron • Machining - Castings • Castings - Gray Iron • Machining - CNC Milling & Turning • Castings - Sand

A high quality supplier of machined and rough ductile, gray, and austempered ductile iron castings.

Quality Certifications: ISO 9001:2008 • ABS CERTIFIED
Service Categories: Stampings - Metal • Fabricating - Sheet Metal • Laser Cutting • Welding - Robotic

Manufacturer of Custom Metal Stampings, Custom Metal Fabrication, Metal Forming, Brackets, Precision Shims, Metallic Gaskets, Laser Cutting, CNC Punching, Welding (Mig, Spot, Stud, Nut), Inventory Stocking Programs, Specialized Packaging, Part Marking & Labeling.

Quality Certifications: IATF 16949 • AS 9100 • ISO 14001
Service Categories: Assemblies • Assemblies - Electromechanical • Assemblies - Turnkey • Assemblies - Mechanical • Hoses, Clamps & Fittings

We are a provider of production volume contract assembly & sub-assembly services. Our specialty is integrating 100% in-process testing & verification in our assembly process. In addition to assemblies we are a molder of rubber and plastic parts. We do everything from single pieces to large volume. All under one roof.

Quality Certifications: ISO 9001:2008 • 6 SIGMA • UL APPROVED
OMNI GEAR & MACHINE CORP.     Booth # 236
Service Categories: Gears • Hobbing - Gears & Pinions • Gears - Worm • Grinding - Gears

We specialize in the manufacture of precision machined custom gears in a variety of sizes and types, including spurs, helicals, clusters, worms, worm gears, sprockets, internals, straight side splines, timing belt pulleys, HTD pulleys, metric gears, and special forms for use in any type of application. We produce gears from .5" diameter up to 118".

Service Categories: Quality Systems • Reverse Engineering • CAD/CAM Software • Prototypes - Virtual • Tools, Dies & Fixtures

We are a 3D technologies company with specialties in CAD/CAM, 3D Scanning, reverse engineering and quality control. We have metrology grade hardware, software and engineering services to accommodate any size project.

OTTENWELLER CO.     Booth # 416
Service Categories: Fabricating - Steel • Fabricating - Heavy Steel & Plate • Machining - Weldments • Welding - Robotic • Metal Finishing - Electrostatic Painting

Our long history in metal fabrication has given us proven success in delivering quality parts to our customers. We have the internal capability to laser process, machine, form, manual weld, robotic weld, and wet-spray paint. In addition to those capabilities we have a fully staffed engineering and quality control department.

Quality Certifications: ISO 9001:2001 • ISO 14001:2004
PARAMONT MACHINE CO.     Booth # 433
Service Categories: Plastics - CNC Machining • Machining - CNC Milling & Turning • Bushings • Screw Machining • Machining - Precision CNC

Specializes in the precision machining of high performance engineering thermoplastics.

Quality Certifications: AS 9100 • ISO 9000
PCM PRODUCTS INC.     Booth # 100
Service Categories: Photochemical Etching & Machining • Shielding - EMI/RFI • Chemical Milling

We produce precision, burr/stress free parts, .1" thick down to .0001" thick. In-house plating, forming, heat treating and assembly. Competes with laser cutting and EDM. COMPLIANT TO ISO 9001:2000 & AS9100B & ANSI/ASQ Z1.4-2003.

Quality Certifications: MIL-I-45208
Service Categories: Adhesives • Gaskets, Seals, Washers & O-rings • Potting & Encapsulation • Surface Treatment • Coatings - Conformal

Quality certified manufacturer of adhesives & sealants. Product lines include anaerobic, cyanoacrylates, epoxy, structural acrylic, UV/visible, modified epoxy, MS polymer and polyurethanes.

Quality Certifications: ISO 9001:2015
Service Categories: Machining - Precision CNC • Screw Machining - Multi Spindle • Screw Machining - Swiss/CNC Swiss • Assemblies - Mechanical • Machining - CNC Milling & Turning

Woman-owned. Precision machined parts. High quality, competitive pricing for lowest total cost. CNC Turning & Milling, CNC Swiss, Multi-spindle Automatic Screw Machines. JIT, Dock to Stock. Annual Volumes from 500 to Millions. Variety of Materials. Prototyping service for production programs. ISO 9001:2015 Registered.

Quality Certifications: ISO 9001:2015 REGISTERED
PIVOT POINT INC.     Booth # 402
Service Categories: Fasteners • Wire Rope Assemblies • Pins & Shafts • Screw Machining • Cold Heading - Cold Forming

Manufacturer and Designer of Non-Threaded Fastener Solutions: Clevis pins, Cotters, Quick Release Pins/Devices, Steel Cable Assemblies & More. Exclusive, Award-Winning Fastener Inventions including the popular SLIC PinTM, Bow-Tie Locking Cotter, Rue Ring Locking Cotter, U-Lock Nylon Lanyard, and Auto-Lock Safety Pull Pin.

Quality Certifications: ISO 9001:2015
Service Categories: Tube Bending & Fabricating • Laser Machining • Fabricating - Steel • Cutting - Tube & Pipe • Machining - Tube Piercing & Tubing

PJ Tube (Phillips & Johnston) is a manufacturer and precision fabricator of tubular metals. Several strategic facilities deploying the most advanced technology offering quality manufacturing, precision fabricating & inventory solutions for tubular metals in stainless steel, specialty alloys, carbon steel, aluminum & red metals. One-stop shop for all specialty tubing needs.

Quality Certifications: ISO 9001:2008
Service Categories: Plastics - Thermoforming/Vacuum Forming • Assemblies - Mechanical • Assemblies - Electronic

Providing a wide variety of custom thermoformed plastic parts for various industries. Our in-house design, engineering, tooling and manufacturing departments provide a full range of customer services that include: research & prototype, CAD services, pattern & mold making, cast tooling, custom molded plastic parts, trimming & assembly.

Quality Certifications: ISO 9001
PR MACHINE WORKS INC. / SAS INC.     Booth # 135
Service Categories: Machining - CNC Milling & Turning • Machining - Multi Axis • Machining - Production • Prototypes - Fabrication • Assemblies - Turnkey

A full-service facility with state-of-the-art equipment. Our capabilities include: low to high volume production machining, prototypes, precision fabrication & welding, design & managed inventory services. Secondary operations include in-house plasma cutting, punching, forming, & shearing; along with AWS-certified MIG, TIG & stick welding for virtually any ferrous or non-ferrous material. Quality products and custom machines built to your specs & delivered on time, every time.

Quality Certifications: ISO 9001:2015
Service Categories: Nameplates, Dials & Panels • Switches - Membrane • Labels, Tapes & Decals

Front-Panels, Faceplates, Graphic-Panels, Metalphoto-Panels, Membrane-Panels, Graphic-Overlays, Labels, and Nameplates. In-House capability of metal machining, punching, bending, Pem-insertion, membrane circuits made 100% in-house. For a quote, send RFQ to rossj@pgict.net and dawnb@pgict.net. Or call Ross Johnson at 860-248-2046.

Quality Certifications: ITAR
Service Categories: Assemblies - Stamped • Stampings - Fineblanked • Plastics - Insert Injection Molding • Stampings - High Volume • Machining - CNC Milling & Turning

A contract manufacturer offering Precision Metal Stampings (45-400 tons), Fineblanking (100-630 tons), insert molding, grinding, robotic mig welding along with other secondary operations. Serving the aerospace, HVAC, automotive, hand tools, industrial, small engine and other market segments from our IATF and ISO14001 Certified, 161,000 sq. ft. facility.

Quality Certifications: IATF • ISO 14001
Service Categories: Safety Certifications • Certification Services • Safety Products & Components • Engineering & Technical Services

Providing product developers and manufacturers with expert advice and testing services since 1988, so they can confidently secure product safety and regulatory compliance. From lighting fixtures to consumer products, to motor controllers and medical devices, we have helped customers obtain more than 3,000 product certifications worldwide.

Service Categories: Castings - Die • Castings - Die, Zinc • Castings - Die, Aluminum

Aluminum & zinc die castings. In-house painting, powder coating, complete tool & die & precision machining.

Quality Certifications: ISO 9001:2015
Service Categories: Metal Finishing - Painting • Powder Coating

Providing powder coating, liquid coating, and sandblasting services for steel, aluminum, and castings, as well as weldments and fabricated parts.

Quality Certifications: ANSI/ISO/ASQ 9001:2015
Service Categories: Machining - Production • Prototypes - Machining • Machining - Rotary Transfer

Our capabilities are twofold. One side is high volume screw machine with capacity to 1 5/8". The other side is low volume CNC machining to 8" diameter.

Quality Certifications: ISO 9001:2008 • AS 9100-C
Service Categories: Plastics - Injection Molding • Plastics - Low Volume • Prototypes - Plastic • Tooling - Plastic Injection Molding • Molds & Moldmaking - Plastic

We deliver highly-complex injection-molded parts and assemblies to the medical, aerospace/defense, automotive, electronics and consumer products industries. At PTI, we adeptly meet specialized low-volume needs, as well as your requirements for higher volumes.

Quality Certifications: ISO 13485:2003 • ISO 9001:2008 • TS 16949 • MEDACCRED, ITAR
Service Categories: Machining - CNC Milling & Turning • Machining - Production • Machining - Large Parts • Balancing Service • Assemblies

A contract machining and assembly company that currently provides services in the following industries: medium / heavy duty trucking, power transmission, diesel engine manufacturers, automotive, motorcycle and material handling. Primary machining includes grey and ductile iron, aluminum castings, steel burn-outs, steel forgings and tubing.

Quality Certifications: ISO/TS 16949 • ISO 14001:2004
R & B GRINDING CO. INC.     Booth # 315
Service Categories: Machining - CNC Milling & Turning • Grinding • Broaching • Heat Treating • Assemblies

World class machining specialists ISO 9001:2015 certified. Offering superior precision CNC turnings / milling, CNC grinding, broaching & welding. Specializing in heat treated and welded assemblies. We are your one stop shop with CNC milling/ turning, precision grinding, plating, heat treating, surface coating.

Quality Certifications: ISO 9001:2015
RAPID     Booth # 202
Service Categories: Prototypes - Rapid Sheet Metal • Prototypes - Machining • Assemblies - Cable • Machining - CNC Milling & Turning • Fabricating - Sheet Metal

Rapid, a Protolabs Company. Rapid is a quick-turn manufacturer of sheet metal and CNC machined parts. The company provides quotes within 24 hours, and produces parts within days. Since being acquired by Protolabs in December 2017, we’re now able to add 3D printing and injection molding to our services. Visit rapidmanufacturing.com for more information.

Quality Certifications: ISO 9001:2015 • ITAR REGISTERED
Service Categories: Fabricating - Printed Circuit Boards • Testing - Printed Circuit Boards • Assemblies - Electronic • Engineering & Technical Services • Prototypes - Electronic

Originating from 40 years of PCB fabrication in the US, DIVSYS is a PCB expert providing PC Boards without the quality risks from any competition. DFM file analysis, Electrical (BBT) & in-house Class 3 laboratory in Indianapolis assures risk-free PCBs. In addition to PCBs, RapidProto, LLC - ICAPE, LLC can provide 1-3 day assembly services in our state-of-the-art facility. For a detailed quote please call 317-975-2060.

Quality Certifications: ISO 9001
Service Categories: Fluid Power • Hoses, Clamps & Fittings • Hydraulics & Pneumatics

We are a premier source for fluid transfer systems. Since 1942 we've been designing and manufacturing custom solutions for a diverse range of Original Equipment Manufacturers (OEM) serving an array of markets including marine, off-road, construction, power-sports, medical, industrial equipment, automotive, and agriculture.

Quality Certifications: ISO 9001:2015
REALIZE INC.     Booth # 404
Service Categories: 3D Printing • Rapid Prototyping • Prototypes - Plastic • Prototypes - Models • Prototypes - Rubber

The latest rapid prototyping technologies provide superior quality rapid prototypes from small, intricate stereolithography models requiring high-resolution to the largest SLA prototype or special custom projects. A vast portfolio of material choices & additive mfg. technology processes gives Realize clients unparalleled personalized service resulting in an exceptional high-quality rapid prototype, on-time delivery, & a few extra touches that complete what we call “The Realize Experience”. Realize is your rapid prototyping expert!

Service Categories: Castings - Aluminum • Castings - Permanent Mold • Castings - Sand

Aluminum permanent mold & sand castings. Casting weights from ounces to 200 lbs. Low to high volume applications, in-house tooling, machining, heat treat, x-ray, full metrology lab, dye penetrant & pressure testing.

Quality Certifications: ISO 9001:2008 • ISO/TS 16949:2009 • ISO 14001:2004
RENTAPEN LLC     Booth # 436
Service Categories: Jigs & Fixtures • Tools, Dies & Fixtures • Welding - Robotic • Laser Cutting • Stampings - Shims

We have built a solid reputation for designing and manufacturing weld fixtures, assembly fixtures, work holding fixtures, etc. to become a vendor source to many OEMs as well as to a host of metal fabricators, stamping companies, and various CNC machine and tooling shops. We also offer a product line of Trunnions.

Quality Certifications: AMER WELDING SOCIETY
Service Categories: Screw Machining - Multi Spindle • Machining - CNC Milling & Turning • Machining - Precision CNC • Machining - Multi Axis • Screw Machining - Swiss/CNC Swiss

Offering precision production machining, featuring twin-spindle multi-tasking CNC turnmill centers and multi axis CNC cells, swiss, & multiple spindle screw machines.

Quality Certifications: ISO 9001:2008 • ITAR REGISTERED
S & J PRECISION INC.     Booth # 305
Service Categories: Machining • Plastics - Injection Molding • Special Machinery - Design, Build & Rebuild • Prototypes - Machining • Tooling

We consist of three divisions: machining division both production and small run; plastic injection molding division; and automation design and build division. Engineering services available both mechanical and electrical.

Quality Certifications: ISO 9001:2008
Service Categories: Laser Cutting • Fabricating - Stainless Steel • Fabricating - Sheet Metal • Fabricating - Steel • Welding & Weldments

Precision metal fabrication, including laser cutting, Mig/Tig welding, forming & stampings. Quality work & on-time delivery.

SEAL & DESIGN INC.     Booth # 534
Service Categories: Gaskets, Seals, Washers & O-rings • Die-Cutting • Laminating • Fabricating - Foam • Plastics - Injection Molding

A world-class manufacturing and distribution company specializing in all types of sealing products. Our product line includes gaskets, o-rings, seals, molded products, die-cut foams, and other products for all kinds of sealing applications. Supplying Automotive, Medical, Military, Aerospace, Electronics, Power Generation, Hydraulics markets and more.

Quality Certifications: ISO/TS 16949 • ITAR • NSF
Service Categories: Plastics - Injection Molding • Prototypes - Plastic • Plastics - Low Volume • Molds & Moldmaking - Plastic • Plastics - Painting

We are a full service plastic injection molding company specializing in prototype injection molding, low to mid volume production and mold making. We are headquartered in the Clearwater Beach/Tampa Bay area and have two manufacturing locations, Port Richey and Brooksville, FL. Employing 160, Seaway strives to provide technology leadership and performance excellence to medical, aerospace, military, packaging, food service, industrial and consumer products.

Quality Certifications: ISO 13485:2016, ISO 9001:2015 • ANSI/ASQ Q9001-2000 • ITAR REGISTERED • NADCAP ACCREDITED
SI PLASTICS INC.     Booth # 325
Service Categories: Plastics - Injection Molding • Plastics - Insert Injection Molding • Plastics - Heat Sealing & Welding • Plastics - Hot Stamping & Screening • Assemblies

UL certified supplier of custom, plastic injection molded parts. Located in the greater Louisville, Kentucky area with press sizes from 22 to 1000 tons, established 19 years, non-union, extremely competitive pricing, on time delivery and a single digit PPM.

Quality Certifications: ISO 9001:2008 • ISO/TS 16949 • IATF 16949
Service Categories: Die-Cutting • Labels, Tapes & Decals • Tools, Dies & Fixtures • Fabricating - Foil, Films & Foams

Rotary die cutting equipment and rotary die converting facility and a contract converter for the medical and industrial markets.

Quality Certifications: ISO 9001:2008 • ISO 13485:2003
Service Categories: Heat Treating • Brazing - Vacuum Furnace • Nitriding

We offer high quality Vacuum Heat Treating services producing bright, scale-free parts with minimal distortion. Markets served include aerospace, medical, power generation, firearms & ordnance, and more. Our state-of-the-art vacuum furnaces range from lab sized to 48 feet. Four plants located in Eastern, PA, Western, PA, South Carolina, and California.

Quality Certifications: ISO 9001:2015 • AS 9100D • ITAR
Service Categories: Springs - Coil • Stampings - Metal • Laser Cutting • Bending - Custom • Fabricating - Sheet Metal

Custom Compression, Extension & Torsion Springs. Wire Forms, Stampings, Fourslide parts, Progressive Die, In-House Tool & Die, Precision Sheet Metal Fab, Fiberoptic Laser Cutting & Machining. Grinding, Shot-peening, Powder Coating, Painting & Silk Screen Printing. Prototypes to production. Please follow us on Instagram. Visit our website for a free quote.

STARN TOOL & MFG.     Booth # 309
Service Categories: Machining - Precision CNC • Machining - CNC Milling & Turning • Machining - Multi Axis • Grinding - Precision • Fabricating - Plastic

Our manufacturing diversity is evident in the range of industries we serve. Continuously combining the latest technologies, processes and business practices over sixty years of precision tooling experience ensures the highest quality tooling while fulfulling customer driven lead times.

Quality Certifications: ISO 9001:2008 • SAM/DDTC REGISTERED
Service Categories: Fabricating - Sheet Metal • Laser Cutting • Fabricating - Stainless Steel • Laser Machining • Stampings - Metal

Trusted contract metal fabrication. Hit your objectives, keep your promises, grow your company. Mid to high volume production of fabricated metal components and assemblies. 99.2% quality rating & 96% on time delivery.

Quality Certifications: ISO 9001:2008
STEWART EFI LLC     Booth # 441
Service Categories: Stampings - Deep Drawn Shells • Stampings - Progressive Die • Stampings - Fourslide

A mfgr. of medium-to-high volume precision progressive die stampings; deep-drawn, slide-formed components; wire forms; & multi-component assemblies. In-house design & tool building, reel-to-reel stampings, transfer press & secondary tapping, welding, staking, screw insertion, value-added plating, heat treating, & secondary processes. Facilities located in CT & TX.

Quality Certifications: ISO/TS 16942:2009 • ISO 9001:2008
SUMMIT/EMS CORP.     Booth # 439
Service Categories: Assemblies - Printed Circuit Boards • Surface Mount Technology - Assembly • Assemblies - Electronic

SMT electronic assembly and final product assembly.

Quality Certifications: ISO 9001:2000
Service Categories: Welding - Laser • Testing - Non-Destructive • Laser Marking • Welding - TIG Aluminum • Welding & Weldments

Precision Welding Laboratory; focused on TIG welding (Micro & Laser Welding, Spot & Seam Welding), multi-axis laser cutting surrounded by a NADCAP Accreditation for Laser & Fusion Welding and Non-Destructive Testing. An AS 9100 Quality System backed up with CMM inspection, Roll Forming, Resistance Welding & CWI Inspection on-site. SJTI is a FAA Certified Repair Station.

Quality Certifications: NADCAP WELDING, NDT • AWSD17.1 • AS9100 REV D, ISO 9001:2008 • FAA REPAIR FACILITY
SURFACE FINISHES     Booth # 120
Service Categories: Optical Polishing • Lapping • Machining - Single Point Diamond • Grinding - I.D. & O.D. • Metrology - Equipment & Services

Precision Finishing, Fabrication and Refurbishment Services, Chemical Mechanical Polishing, Optical Quality Polishing, Precision Lapping, Single Point Diamond Machining, and Precision Low Stress Grinding. See our website for typical results.

Quality Certifications: ITAR REGISTERED
Service Categories: CAD/CAM Software • Software For Job Shops & Manufacturers • CAD/CAM Training • Measurement - Software • 3D Printing

Partnered with manufacturing leaders - including Siemens PLM, Mentor Graphics, and Markforged, we deliver the best CAD/CAM/CAE and product data management solutions for your company and take an active role in the investments you make. Whether it’s engineering software, PLM training, or services, our engineers can help you tackle the most critical challenges.

SYNCRO CORP.     Booth # 331
Service Categories: Assemblies - Printed Circuit Boards • Systems Integration • Wire & Cable Harnesses • Engineering & Technical Services

A privately-held EMS and systems integration company located just minutes from Huntsville, Alabama. Syncro has experience in various markets including medical, industrial, utilities, transportation, technology, and military markets. Syncro Corporation offers more than 70 years of experience in product development, management, and manufacturing.

Quality Certifications: IPC-A-610 TRAINER • ISO 9001:2008 • ITAR • FDA LICENSED
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Electronic • Surface Mount Technology - Assembly • Electronics - New Product Development • Testing - Printed Circuit Boards

We are an ISO Certified, Turn-key Electronic Contract Manufacturer and Design Engineering firm, specializing in product design and mobile apps, automated test systems, and manufacture of complex electronic assemblies for commercial and industrial applications.

Quality Certifications: ISO 9001:2015 • UL 508 • J-STD-001 • IPC-A-610
TEMPCO MFG. CO. INC.     Booth # 138
Service Categories: Stampings - Metal • Fabricating - Sheet Metal • Assemblies - Mechanical • Welding & Weldments • Tools, Dies & Fixtures

With over 70 years of experience, Tempco produces precision metal stampings, precision sheet metal fabrications and mechanical assemblies for clients across numerous industries. Tempco offers a complete tool & die room to go along with secondary services to be your one stop shop for metal stampings and sheet metal fabrications.

Quality Certifications: AS9100D • ISO 9001:2015 • ISO 13485:2016
THE RUBBER GROUP     Booth # 132
Service Categories: Rubber Molding • Die-Cutting • Rubber To Metal Bonding • Rubber - Injection Molding • Rubber - Transfer Molding

Twenty-five years of experience manufacturing custom and standard rubber products. Injection, transfer and compression molding from a variety of different materials including medical grade silicone, fluorosilicone, FKM, Neoprene, EPDM, HNBR, NBR and natural rubber.

Quality Certifications: ISO 9001:2015 • MIL-I-45208, MIL-I-9858 • FDA • ITAR
TROJON GEAR INC.     Booth # 430
Service Categories: Pins & Shafts • Gears • Splines • Machining - Precision CNC • Machining - CNC Milling & Turning

Specializes in precision machined gears & shafts. Gear production, Sprockets, segments, couplings, pinions, pins, etc. Aerospace, canning, mining, and automotive. Kanban, ISO certified, & AS9100 compliant.

Quality Certifications: ISO 9001:2008
TUTCO     Booth # 316
Service Categories: Heating Elements - Custom • Heating Elements - Electric • Heaters - Custom • Assemblies - Electrical • Fans & Blowers

The world's largest supplier of open coil heating elements. We produce 35,000 to 38,000 heaters a day to meet the demands of our OEM customers. Leading the world in heating innovation, Tutco holds 80% of the U.S. Patents in open coil heating technology. Tutco heating components can be found in countless commercial applications, including refrigeration, HVAC, appliance, lab equipment and vending. We can quickly bring your project from concept to completion.

Quality Certifications: ISO 9001:2008 • ISO 14001:2004 • OHSAS 18001:2007
ULTRA TOOL & MFG. INC.     Booth # 212
Service Categories: Stampings - Metal • Fabricating - Sheet Metal • Tools, Dies & Fixtures • Assemblies - Mechanical • Stampings - Progressive Die

For 48 years we have been exceeding customers’ expectations with our in-house tool design & build, metal stampings, assemblies, fabrications and customer service. Our team finds cost-effective solutions for your challenging sheet metal parts. We excel in working with your engineers upfront to reduce cost. We are set-up & ready for growth due to our continuous reinvestment.

Quality Certifications: ISO 9001:2008
UNI-GRIP INC.     Booth # 335
Service Categories: Extrusions - Rubber • Extrusions - Plastic

We are a manufacturer of weather seals and trim products. We extrude EPDM, silicone, nitrile, and PVC.

Quality Certifications: ISO 9001:2015
Service Categories: Fabricating - Sheet Metal • Stampings - Metal • Machining - Precision CNC • Welding - Robotic • Engineering & Technical Services

A custom manufacturer specializing in stampings, precision sheet metal parts & assemblies, stamping tools, machined components, & a proprietary line of tool storage cabinets.

VIKING PLASTICS     Booth # 511
Service Categories: Plastics - Injection Molding • Assemblies • Plastics - Insert Injection Molding • Plastics - Two Shot Injection Molding • Pad Printing

We are a leading injection molding and value-added assembly service provider, delivering innovative products including sealing solutions, custom injection molding, assembly, and post-molding secondary services. We serve a variety of industries including functional and interior automotive, HVAC, specialty packaging, appliance, energy & battery cases, and filtration.

Quality Certifications: IATF 16949:2016 • ISO 14001:2015 • ISO 9001:2015 REGISTERED
WCS INDUSTRIES     Booth # 446
Service Categories: Springs - Coil • Cold Heading - Cold Forming • Wire Forming & Fabricating • Fasteners • Screw Machining - Multi Spindle

We are a custom manufacturer of metal components including precision mechanical springs, wire forms, retaining rings, cold formed components, CNC & multi-spindle machined products. Our component offerings are supported by our combined engineering & technical professionals. Our goal is to partner with our customers to provide the metal components they need.

Quality Certifications: ISO 9001:2015 • IATF 16949:2016

© 2017 The Job Shop Company • 16 Waterbury Road, Prospect, CT 06712 • (800) 225-4535