Upper Midwest Design-2-Part Show
June 7 & 8, 2017
Minneapolis Convention Center • Minneapolis, MN



Search by Category

or

Search by Keywords


  Reset Search  



0 Exhibitors to Meet

Exhibitor List


Listed below are the current exhibitors and service categories of companies in the show.
This page is also an interactive tool for you to use when planning your personal visit.

[ 163 ] companies match your search.
FEATURED EXHIBITORS listed first alphabetically
ABSOLUTE QUALITY MANUFACTURING     Booth # 414
Service Categories: Wire & Cable Harnesses • Panels - Control • Electronic Enclosures • Assemblies - Electrical • Welding - Sonic

Manufacturer of cable assemblies, wire harnesses, electrical panels and enclosures. Leveraging our extensive network of suppliers we are able to provide our customers with world class assemblies built to UL, UL508A and IPC A620 industry standards.

www.absoluteq.com

Quality Certifications: IPC/WHMA-A-620 • UL LISTED • UL 508A
ADRON TOOL CORP.     Booth # 103
Service Categories: EDM • EDM - Wire • EDM - Sinker • EDM - Small Hole Drilling • Machining - Production

Wire EDM specialists with over 50 CNC mach., CNC (sinker) std. EDM; largest capacity, 40"x32"x18", workpiece wt. 10,000 lbs., 27-1/2" thick; metal parts rapid prototyping svc. and prod. runs of complex, contoured shapes in tough to mach. or exotic mtl.; CNC production machining, coord. measuring sys., SPC, OGP optical non-contact measuring.

www.adron.com

Quality Certifications: ISO 9001:2008 • AS 9100 • NADCAP AS7116
AD-TECH INDUSTRIES INC.     Booth # 442
Service Categories: Powder Coating • Metal Finishing - Painting • Metal Finishing - Electroless Nickel • Shielding - EMI/RFI

Job shop industrial painter including liquid painting, powder painting, e-coat, electroless nickel plating, pre-finishing, custom masking, custom assembly, silk screening and decal application, EMI/RFI shielding, custom packaging, warehouse and JIT kanban services, stripping and paint removal capabilities.

www.ad-techind.com

AIM MACHINING LLC     Booth # 423
Service Categories: Machining - Precision CNC • Machining - CNC Milling & Turning • Turning - Stainless Steel • Assemblies - Turnkey

Higher volume CNC lathe turned tight-tolerance components to customer specification. Parts from 3/8"-15" diameter & +60" long. Offer simpler sub-assemblies to intricate mechanisms with full traceability. Experience in Stainless Steel, Inconell, Nitronic 50, Carbon & Alloy Steels, Beryllium Copper, Wear and Corrosion Resistance Coatings. Business unit of Gremada Industries.

www.aimachining.com

Quality Certifications: I.S. EN ISO 9001:2008
ANCHOR PLASTICS INC.     Booth # 325
Service Categories: Plastics - Injection Molding • Assemblies • Assemblies - Mechanical • Assemblies - Electromechanical

A medium sized manufacturer of injection molded products. We specialize in high-precision plastics, designs & processes.

www.anchor-plastics.com

Quality Certifications: ISO 9000
APPLE RUBBER PRODUCTS     Booth # 244
Service Categories: Gaskets, Seals, Washers & O-rings • Rubber Molding • Rubber To Metal Bonding • Silicone / Rubber - Liquid Injection Molding • Prototypes - Rubber

Manufacturer of elastomeric parts. O-Rings; MicrOrings to MacrOrings, AS568 & ISO 3601 (search inventory from our Website). We design & manufacture custom, rubber bonded to plastic, metal & filter materials, and medical rubber parts. Our services include engineering, design assistance & QC testing & reporting, from prototype to Production. Class 7 (10,000) clean room.

www.applerubber.com

Quality Certifications: ISO 9001 • AS 9100
ASH INDUSTRIES     Booth # 119
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Plastics - Insert Injection Molding • Plastics - Hot Stamping & Screening • Prototypes - Plastic

Engineered for You. In-House MIM, Thermoplastic, and Silicone Injection & Roto Molding & Tooling as well as cast epoxy components & 7-Axis Swiss Lathe production. Molding includes custom inserts & over-molding, two shot molding. Component assembly, secondary processing & decorating, utilizing the latest in CNC, EDM & Modeling technology.

www.ashindustries.com

Quality Certifications: ISO 9001 • ISO 7 CLASS 10K CLEAN ROOM
BRACALENTE MANUFACTURING GROUP     Booth # 214
Service Categories: Machining - CNC Milling & Turning • Screw Machining - Swiss/CNC Swiss • Screw Machining - Multi Spindle • Machining - Rotary Transfer • Assemblies

We are a third generation, family owned & operated, multi-faceted machining supplier with 210 employees in two facilities totaling 97,000 sq. ft. with 120 machine tools of all disciplines. As a pledge of complete customer satisfaction, we employ the latest in precision machining, process controls, quality systems & supply chain management.

www.bracalente.com

Quality Certifications: AS 9100 • ISO 9001:2008
CR METAL PRODUCTS     Booth # 221
Service Categories: Fabricating - Sheet Metal • Powder Coating • Laser Cutting • Welding - Robotic • Screen Printing

A custom metal fabrication facility/contract manufacturer specializing in precision sheet metal fabrication, powder coated finishes, & silkscreening.

www.crmetal.com

Quality Certifications: ISO 9001:2008
CUSTOM PLASTICS INC.     Booth # 127
Service Categories: Extrusions - Plastic • Plastics - Injection Molding • Fabricating - Plastic

Partnering with OEMs worldwide from multiple industries, we manufacture plastic parts and assemblies that reduce overall part production costs, streamline the assembly and manufacturing process, and enhance end products with our value-added finishing services. We are a plastics injection molding and profile extrusion manufacturer with a full-service engineering team.

www.customplasticsinc.com

Quality Certifications: ISO 9001:2008
DAYTON ROGERS MFG. CO.     Booth # 118
Service Categories: Stampings - Metal • Fabricating - Sheet Metal • Assemblies - Stamped • Stampings - Short Run • Rapid Prototyping

We provide metalforming solutions to industry with 4 manufacturing facilities. We are local - regional and national in our footprint. Modular low volume-to-progressive metal stampings, laser, metal fabrication, welded and complete assemblies, prototypes, drawn shapes, complete tool & die facility. All secondary operations and turnkey system. Our manufacturing centers are located in Minneapolis, MN; Columbus, OH; Arlington, TX & Columbia, SC.

www.daytonrogers.com

Quality Certifications: ISO 9001:2008 • AS 9100 • ITAR
DB ROBERTS     Booth # 101
Service Categories: Fasteners • Electronic Hardware • Assembly Hardware • Levers, Knobs & Handles • Masking

Since our inception, we have been focused on providing solutions for fastener applications in Sheet Metal Fabrication, Metalworking, and Industrial Electronics. Our "Superior Customer Service" and "Commitment to Excellence" has proven to be a winning formula fueling innovation and rapid growth year after year.

www.dbroberts.com

Quality Certifications: AS9120A • ISO 9001:2008
EAC PRODUCT DEVELOPMENT SOLUTIONS     Booth # 240
Service Categories: Engineering & Technical Services • CAD Design Services • CAD/CAM Training • 3D Printing • CAD/CAM Software

We transform the way companies design, manufacture, connect to, and service their products. We offer world-class tools & services to help organizations get successful products to market faster. These tools & services include world-class Engineering and Design Services and industry leading PTC Creo CAD software.

www.eacpds.com

EAST IOWA MACHINE CO. LLC     Booth # 401
Service Categories: Machining • Fabricating - Sheet Metal • Laser Cutting • Assemblies • Welding - Robotic

An ISO 9001:2008 certified manufacturing company employing approximately 150 people at its location in Farley, Iowa. East Iowa Machine Company (EIMCo.) converts raw metals into finished component parts and assemblies utilizing a wide variety of computerized numeric controlled (CNC) equipment and state-of-the-art manufacturing processes.

www.eimcoinc.com

Quality Certifications: ISO 9000:2008
ELECTRA USA INC.     Booth # 439
Service Categories: Locks • Hinges • Gaskets, Seals, Washers & O-rings • Stainless Steel - Materials • Assembly Hardware

We produce Electronic Locking Systems, Commercial, Industrial and Heavy Duty locks, padlocks, hinges, handles, gaskets and accessories. Applications include generators, transformers, metal furniture, electrical panels, servers, telecommunication and communication cabinets, cars, trucks, recreational vehicles etc.

www.polyhardware.com

Quality Certifications: RoHS / REACH • ISO 9001: 2008 CERTIFIED
ELECTRO INDUSTRIES     Booth # 419
Service Categories: Assemblies - Electromechanical • Assemblies - Circuits • Fabricating - Sheet Metal • Coatings - Electrostatic Powder • Panels - Control

A locally owned family business that has been serving the heating industry along with various OEM Industries over 44 years. We pride ourselves in being able to offer the OEM market a company that can handle not only the manufacturing requirements needed-like sheet metal punching and forming, robotic welding, powder coat painitng, circuit board assembly and full assembly operations-but also provide full design capabilities. Our capacity is endless. Allow us to be your one stop job shop.

www.electromn.com

Quality Certifications: ASME • CAN/CSA C22.2 • UL & CSA • UL508a CERTIFIED
ENGINEERED MATERIALS INC.     Booth # 432
Service Categories: Fabricating - Non-Metallic • Gaskets, Seals, Washers & O-rings • Fabricating - Foam • Laminating • Adhesives

Converter and fabricator offering laminating, slitting, die cutting, and kiss cutting capabilities. Materials include industrial tapes, foam, rubber, insulations, adhesives, and sealants for bonding, gasketing, sealing, cushioning, and insulating applications. Authorized 3M Converter, Sika Distributor, St. Gobain Supplier and Converter, and more.

www.engineeredmaterialsinc.com

Quality Certifications: ISO 9001:2000
FOX VALLEY SPRING LLC     Booth # 104
Service Categories: Springs - Coil • Springs - Flat • Wire Forming & Fabricating • Stampings - Fourslide • Stampings - Short Run

Manufacturer of custom springs, wire forms and metal forms. We utilize SPC systems, CNC coilers and experienced craftsmen to assure consistent quality. Design assistance and rush orders are welcome. Wisconsin Grand Manufacturer of the Year. We Quality Certify each process & provide a total Value-added supplier package.

www.foxvalleyspring.com

Quality Certifications: ISO 9001:2008 • ITAR CERTIFIED
GRIMM BROTHERS PLASTICS     Booth # 446
Service Categories: Plastics - Pressure Forming • Plastics - Thermoforming/Vacuum Forming • Plastics - Painting • Plastics - Low Volume • Prototypes - Plastic

Specializes in highly aesthetic, highly detailed pressure formed and thermoformed plastic parts. The look of injection molding at a fraction of the startup tooling costs. This process is perfect for mid-low volume quantities with tool sizes up to 5 feet by 8 feet. We also offer design support and full engineering services to help with any stage of the project.

www.grimmbrothers.com

Quality Certifications: ISO 9001:2008 • 6 SIGMA
HARDWARE SPECIALTY CO. INC.     Booth # 225
Service Categories: Fasteners • Electronic Hardware • Adhesives • Assemblies - Electrical • Assembly Hardware

Our SAE AS9120 Registered Quality Management System and full service Quality Assurance facilities coupled with many years of technical sales experience and deep product line inventory ensure our commitment to total customer satisfaction. Together these make Hardware Specialty an unbeatable source for all your fastener and electronic component requirements.

www.hardwarespecialty.com

Quality Certifications: SAE AS9120 • ISO 9001:2008 • ISO 14001 • MIL STD 45662A
HITCHDOC MANUFACTURING     Booth # 307
Service Categories: Laser Cutting • Welding - MIG • Powder Coating • Assemblies • Tube Bending & Fabricating

We are a family-owned, ISO certified shop with 150 employees & 2 facilities (Jackson, MN & Sioux Falls, SD). We have the ability to produce small parts to large painted & packaged assemblies. Capabilities include: flat/tube lasers, flat/tube forming, welding, sawing, machining, oxy fuel/plasma cutting, powder coating & assembly, as well as stocking/delivery program.

www.hitchdoc.com

Quality Certifications: ISO 9001:2008
I C A CORPORATION     Booth # 134
Service Categories: Machining - Precision CNC • Electronic Enclosures • Fabricating - Sheet Metal • Assemblies - Mechanical • 3D Printing

Employee owned company providing build-to-print metal component parts & assemblies to the defense, analytical instrumentation & transportation industries. Wide range of capabilities - close tolerance CNC milling & turning; 5-axis machining; optomechanical component machining; sheet metal fabrication; custom electronic enclosures; welding; mechanical assembly; 3D printing.

www.icacorp.com

Quality Certifications: ISO 9001:2008 • ITAR REGISTERED
INTERLAKEN TECHNOLOGY CO.     Booth # 410
Service Categories: Hydroforming • Tube Bending & Fabricating • Machinery - Design, Build & Rebuild • Testing - Materials • Engineering & Technical Services

"We’ll make it, or we’ll help you make it" Interlaken Technology is built on a foundation of integrity, innovation, collaboration and clarity. We rely on building long-term relationships with our partners. Be it Hydroform, HEATform™, System design and manufacture, or Material Testing, ITC is passionate about partnering with you to discover creative solutions in metal forming.

www.interlaken.com

Quality Certifications: ISO
J & R MACHINE INC.     Booth # 314
Service Categories: Machining - CNC Milling & Turning • Machining - Production • Machining - Precision CNC • Machining - Conventional CNC • Machining - Castings

We are a knowledge based contract machine shop that solves complex machined part problems through value-added manufacturing, engineering, machining, quality, and exceptional customer service. Additional Services; machining of stainless steel and exotic materials, thread rolling, robotic welding, mechanical assemblies, die-cast aluminum, and aluminum extrusions.

www.jrmachine.com

Quality Certifications: ISO 9001:2008
KAUFMAN MFG. CO.     Booth # 435
Service Categories: Machining - Large Parts • Machining - Castings • Machining - Aluminum • Machining - CNC Milling & Turning • Machining

Specializes in metal cutting for industries as varied as papermaking, crane building and oil fracking pumps. Kaufman Mfg. Co. performs boring, milling and tapping on a variety of machines, including vertical and horizontal mills and lathes as well as three large CNC boring bars. We are an ISO 9001:2008 company.

www.kaufmanmfg.com

Quality Certifications: ISO 9001:2008
KDI PRECISION MFG.     Booth # 426
Service Categories: Assemblies - Electromechanical • Assemblies - Mechanical • Mechanical & Electronic Design • Machining - CNC Milling & Turning • Laser Marking

A low-volume, high-mix, precision contract manufacturer of mechanical and electromechanical devices, systems and sub-systems. Engineering/DFM, integrated electronics and software. CNC machining and laser marking. Custom cable assemblies, prototypes and test equipment. KDI brings creativity and intelligence to complex challenges.

www.kdimfg.com

Quality Certifications: ISO 13485:2003 • ISO 9001:2008 • FDA REGISTERED
LASX INDUSTRIES INC.     Booth # 331
Service Categories: Lasers • Laser Cutting • Laser Drilling • Laser Machining • Industrial Equipment

With our focus on laser cutting solutions, our contract manufacturing facility offers non-contact laser processing using our multiple work stations available. Concentrating on galvanometer technology, with an emphasis on thin, non-metal materials, positions LasX to maintain aggressive tolerances while sustaining high-speed production output on low to high volume mix.

www.lasx.com

LOGIC PD     Booth # 441
Service Categories: Assemblies - Electronic • Assemblies - Printed Circuit Boards • Prototypes - Electromechanical • Engineering & Technical Services • Product Lifecycle Management

Collaborates with clients on their Design & Engineering, Electronics Manufacturing Services and Embedded Products needs. With design, engineering, quality, regulatory, manufacturing and aftermarket services, Logic PD helps clients identify opportunities, reduce risk and control costs to deliver innovative products into the world’s most demanding markets.

www.logicpd.com

Quality Certifications: ISO 9001:2008 / AS 9100 Rev C • ISO 13485:2003 • AS 9100 REV C • NADCAP
MASTERGRAPHICS INC.     Booth # 443
Service Categories: 3D Printing • CAD Design Services • CAD/CAM Training • Prototypes - Plastic • Prototypes - Rubber

Whether you’re involved in engineering or manufacturing, design data is likely at the core of your business. We thrive on helping your design process. We do that by utilizing the best technology from CAD solutions to 3D and Wide-Format printing; leveraging best practices that implement real solutions; helping your team adopt and execute across your organization.

www.mastergraphics.com

NORTHWEST SWISS-MATIC LLC     Booth # 102
Service Categories: Screw Machining • Screw Machining - Swiss/CNC Swiss • Screw Machining - Escomatics • Assemblies - Mechanical • Grinding - Centerless

Precision screw machine parts up to 2 5/8" diameter. All materials. Complete secondary operations including CNC chuckers, grinder, honing, thread rolling, milling, drilling and deburring. ITAR Certified.

www.nwswissmatic.com

Quality Certifications: ISO 9001:2008 / AS9100-C • MIL-I-45208 • MIL-I-45662 • MIL-Q-9858
ODYSSEY ELECTRONICS INC.     Booth # 312
Service Categories: Assemblies - Electronic • Assemblies - Printed Circuit Boards • Assemblies - Electromechanical • Assemblies - Mechanical • Electronics - New Product Development

Incorporated in 1989, Odyssey Electronics Inc. is located in Livonia, Michigan. We have two locations manufacturing Printed Circuit Board Assemblies and Turn-Key products. Between the two locations, we have over 26,000 square feet. Over 18,000 square feet of that is dedicated to manufacturing. Worldwide Operations to serve you.

www.odyssey-oei.com

Quality Certifications: ISO 13485 • ISO 9001:2008 • ITAR • FDA REGISTERED
PARK MFG. CORP.     Booth # 315
Service Categories: Wire & Cable Harnesses • Assemblies - Electromechanical • Assemblies - Electronic • Assemblies - Mechanical • Assemblies - Turnkey

An industry leader in high-quality wire harness, custom cable assembly, and electromechanical assemblies as well as turnkey box and panel builds for a variety of markets, including Automotive, Military, Medical, Industrial, Consumer, Recreational and Off Road. Our newly expanded 80,000 square foot facility showcases our commitment to quality and growth.

www.parkmfg.com

Quality Certifications: ISO 9001:2008 • CSA & UL APPROVED • DOD REGISTERED • RoHS
PRECISION PLUS INC.     Booth # 428
Service Categories: Machining - Swiss Laser & CNC Swiss • Machining - Precision CNC • Machining - Miniature Precision • Screw Machining - Swiss/CNC Swiss • Educational Services

A contract manufacturer of close tolerance, mission critical components for applications where failure is not an option. We employ ~ 75 skilled craftsmen & provide them with industry leading training, world class machine tools/tooling & software tools to get the job done right. Our niche is Swiss Machining to 1-1/4” diameter, coupled with turn/mill machines up to 2-1/2” diameter.

www.preplus.com

Quality Certifications: AS 9100 / ISO 9001:2008 • ITAR • AGMA MEMBER • DOD APPROVED
RAO MANUFACTURING CO.     Booth # 434
Service Categories: Stampings - Deep Drawn Shells • Fabricating - Sheet Metal • Welding - MIG • Welding - TIG Aluminum • Assemblies - Stamped

Specializing in Deep Drawing, Metal Stamping, Sheet Metal Fabricating, Assembly, Tooling, and Tank Heads since 1926. 215,000 square feet, 140 dedicated employees. We excel in: Collaboration, Design Assistance, Forming Simulation, Customer Service, Quality, OTD. Capabilities include: Draw Forming, Metal Stamping, Laser, Turret, Press Brake, Welding, Assembly, and Tooling.

www.raomfg.com

Quality Certifications: AWS D1.3 • ISO 9001:2008
RAY PRODUCTS INC.     Booth # 245
Service Categories: Plastics - Pressure Forming • Plastics - Thermoforming/Vacuum Forming • Plastics - Painting • Packaging • Fabricating - Plastic

Experts in custom heavy gauge thermoforming, including both pressure forming & vacuum forming. Forming capabilities up to 10' x 18' with 6 axis robotic trimming. Preferred supplier to the medical, electronics, telecommunications, automotive, recreational vehicle, green energy and pool & spa markets. In-house painting and contract manufacturing.

www.rayplastics.com

Quality Certifications: ISO 9001:2008 • UL LISTED
RD RUBBER TECHNOLOGY CORP.     Booth # 123
Service Categories: Rubber Molding • Silicone / Rubber - Liquid Injection Molding • Rubber To Metal Bonding • Prototypes - Rubber • Rubber - Injection Molding

Offering liquid silicone (LIM) & silicone rubber molding of precision parts to meet quality & design standards. Metal to Rubber Bonding, Silicone to Plastic Bonding, Cleanroom molding, in-house deflashing, & other value-added operations available. A full line of elastomeric materials is available for LIM, injection, transfer & compression molding.

www.rdrubber.com

Quality Certifications: ISO 9001:2008 • DOE-1050 • ITAR REGISTERED
SIMALEX MANUFACTURING     Booth # 328
Service Categories: Castings - Die, Aluminum • Castings - Die, Zinc • Castings - Die, Magnesium • Castings - Die • Castings - Non-Ferrous

An Aluminum, Zinc and Magnesium manufacturing company with over 50 years experience in the industry. We work with you to ensure you get the parts and quality you need. Whether you are a small or large company doing short or long run projects, we are always here to assist you. Our design for manufacturing assistance is something you can use to optimize your product.

www.simalex.com

Quality Certifications: ISO 9001:2008
SMALLEY     Booth # 113
Service Categories: Snap Rings & Retaining Rings • Springs - Coil • Springs - Wave • Springs - Flat • Fasteners

We are the exclusive manufacturer of the industry-leading Spirolox® Retaining Rings, an innovative design that features a no gap, 360° retaining surface without protruding ears to interfere with mating components. We are also the originator of Crest to Crest® Wave Springs which save up to 50% of space compared to conventional coil springs.

www.smalley.com

Quality Certifications: ISO 9001 & ISO 13485 • ISO/TS 16949 • AS 9100 • ISO 14001
TECH-ETCH INC.     Booth # 114
Service Categories: Chemical Milling • Photochemical Etching & Machining • Shielding - EMI/RFI • Circuits - Flexible • Assemblies - Circuits

Photoetching services featuring specialty materials: tungsten, titanium, polyimide, elgiloy, molybdenum & nitinol. Flexible circuits manufacturer featuring fine line technology, microvias & SMT Assembly. EMI/RFI shielding products manufacturer specializing in beryllium copper spring fingers, conductive fabric gaskets & knitted wire mesh.

www.tech-etch.com

Quality Certifications: ISO 9001:2008 • AS 9100 REV C
ULTIMAKER - DYNAMISM     Booth # 330
Service Categories: 3D Printing • Rapid Prototyping • Rapid Prototyping - Equipment

Ultimaker and Dynamism share the vision to make 3D printing accessible to all. It is why all of our desktop printers are extremely quiet, fast, accurate, reliable and effortless to use, embraced by professionals and novices alike. Ultimaker is one of the most successful and reliable open source 3D printing companies in the world.

www.dynamism.com

ULTRATECH TOOL AND DESIGN     Booth # 204
Service Categories: Stampings - Metal • Stampings - High Volume • Stampings - Progressive Die • Stampings - Deep Drawn Shells • Stampings - Ferrous & Non Ferrous

A world class contract manufacturer supplying customers with turnkey solutions to stampings from prototype to production worldwide. Presses from 32 - 600 tons of capacity, feed lines up to 60" wide and 40,000 lbs. Value added features include in-die tapping & nut/stud insertion, assembly and welding. ISO/TS 16949 Certified. Manufacturing At Its Finest!

www.ultratechtooldesign.com

Quality Certifications: ISO/TS 16949
VB SEALS INC.     Booth # 425
Service Categories: Gaskets, Seals, Washers & O-rings • Hydraulics & Pneumatics • Polyurethane - Parts • Plastics - Injection Molding • Rubber Molding

A supplier of Seals, Sealing products, Custom Molded Rubber and Injection Molded Plastics. VB Seals offers best-in-class engineered rubber and plastic solutions from product design to production start up. VB Seals continues to support your company with JIT Delivery, Inventory Management, and Continued Technical Support. All Suppliers ISO Certified.

www.vbseals.com

VELOCITY MACHINE INC.     Booth # 448
Service Categories: Machining • Machining - Precision CNC • Machining - Robotic • Machining - Multi Axis • Machining - Castings

Since 1999, Velocity Machine has been providing machining, mechanical assembly, supply chain management, inventory programs, packaging solutions to OEM clients worldwide. We currently serve many different industries. Our Quality Management System is ISO 9001:2015 Certified and TS 16949 Compliant. We are also ITAR Compliant, DOD Approved, AIAG Compliant and have our FFL.

www.velocitymachine.com

Quality Certifications: ISO 9001:2015 • ITAR • AIAG/AWS • FEDERAL FIREARMS LICENSE - FFL
ADVANCED INSPECTION SERVICES (AIS)     Booth # 402
Service Categories: Metrology - Equipment & Services • Inspection Services • Quality Assurance • Reverse Engineering

A division of Productivity Quality, Inc., Advanced Inspection Services (AIS) provides contract dimensional inspection. Our services include reverse engineering, FAI, Gage R&R, GD&T Analysis, surface finish, on-site services, training, and calibration.

Quality Certifications: ANAB • ISO/IEC 17025
ADVANCED PROTOTYPE MOLDING     Booth # 303
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Castings - Investment • Machining • Rapid Prototyping

We are proficient in several molding techniques including: Injection Molding, Rapid Prototyping/3D Printing, Cast Urethanes/RTV Molding, Rotational Molding, CNC Machined Parts, Lost Wax Investment Casting, Die Casting, Stamping and Rubber/Silicone Parts. Design consultation is complimentary to guarantee your prototype will proceed to production without a hitch!

Quality Certifications: UL REGISTERED E490896
AERO METALS INC.     Booth # 116
Service Categories: Castings - Investment • Castings - Ferrous • Castings - Non-Ferrous • Castings - Stainless Steel • Castings - Steel

High integrity investment casting, net & near net shapes, thin wall, ferrous & non-ferrous components at the lowest total cost. Creative engineering analysis, secondary machining, Just-in-time delivery. Complete in-house tool & die shop, CAD/CAM tooling, and exacting control in achieving dimensional tolerances as specified. 16 Machining centers, drilling, tapping, impact forming, heat treating, sub-assembly of components. Quality craftsmanship & superior customer service.



Quality Certifications: ISO 9001:2008 • NADCAP • SPC
AFFILIATED PRODUCTS INC.     Booth # 234
Service Categories: Wire & Cable Harnesses • Assemblies - Electromechanical • Assemblies - Electrical

A contract manufacturer of wire harnesses, cable assemblies, and electro-mechanical assemblies. Servicing the Construction, Turf, Off-Road, Industrial & Agriculture markets as well as other related industries.

Quality Certifications: ISO 9001:2008 • UL APPROVED • CSA APPROVED
AJAX METAL FORMING SOLUTIONS     Booth # 321
Service Categories: Stampings - Progressive Die • Laser Cutting • Stampings - Deep Drawn Shells • Fabricating - Stainless Steel • Fabricating - Sheet Metal

Metal Stamping and Fabrication company in Fridley, MN. Our core services include Progressive and stage sheet metal stamping low to high volume. Fiber optic laser sheet metal cutting. Fabrication and much more. EJ Ajax specializes with Stainless steel, Carbon steels, Galvanized, Copper, Aluminum and many more.

Quality Certifications: ISO 9001:2008
ALLEGIS CORPORATION     Booth # 209
Service Categories: Fasteners • Hinges • Industrial Design Services • Adhesives

One of North America’s leading providers of industrial, electronic and vehicular access hardware solutions. With 12 strategically placed distribution facilities, we provide innovative products and supply chain solutions for OEMs across North America.

Quality Certifications: ISO 9001:2008
ALLIANCE PLASTICS CORP.     Booth # 203
Service Categories: Plastics - Thermoplastic Extrusion • Extrusions - Plastic • Plastics - Hot Stamping & Screening • Plastics - Extruded Profiles

Custom plastic profile extruder capable of producing an endless variety of shapes to be used as components or finished goods, in various materials, colors and finishes. Our capabilities include: Profile extrusion, multi-material extrusion, in-line decorating, in-line and off-line fabrication, CNC routing, assembly, application engineering and tooling.

AMERICAN FLEXIBLE PRODUCTS INC.     Booth # 217
Service Categories: Gaskets, Seals, Washers & O-rings • Die-Cutting - Felt, Cork & Rubber • Fabricating - Foil, Films & Foams • Die-Cutting • Waterjet Cutting - Non-Metal

Employee Owned, Custom Fabricator of Flexible materials: foam, rubber, sponge, thin gauge plastics, EMI/RFI, and pressure sensitive adhesives. Services: rotary die cutting/flatbed die cutting, kiss cutting, laser cutting, water jet cutting, slit to width, laminating films, fabric & PSA. Rogers Corporation Preferred Converter. 3M Select Converter.



Quality Certifications: ISO 9001:2015 • SPC
AMERISTAR MFG.     Booth # 243
Service Categories: Stampings - Metal • Fabricating - Sheet Metal • Machining - CNC Milling & Turning • Stampings - Short Run • Laser Cutting

A full service contract manufacturer, providing our customers with Metal Stamping (Long Run & Short Run), Sheet Metal Fabrication, CNC Machining, Welding, Metal Finishing, Assembly, Laser, & Waterjet. Our stock inventory of standard form dies means lower tooling & run costs. Complete in-house tool production.

Quality Certifications: ISO 9001:2008
ANDERSON QUALITY SPRING MFG. INC.     Booth # 222
Service Categories: Springs - Coil • Springs - Flat • Springs - Wave • Assemblies • Stampings - Fourslide

Custom manufacturer of springs, wire forms and formed metal products. Our customers are in the automotive, sporting goods, electronic, medical, dental and motorcycle suspension products industries, worldwide. We work with our customers from design and prototyping to supplier managed inventory programs.



Quality Certifications: ISO 9001:2015 • IATF 16949:2016
ATLAS MFG.     Booth # 445
Service Categories: Fabricating - Sheet Metal • Assemblies - Electromechanical • Metal Cabinets & Enclosures • Powder Coating • Engineering & Technical Services

We offer complete manufacturing specializing in precision, cosmetically finished sheet metal solutions. We serve Original Equipment Manufacturers in key markets of telecommunications, retail, technology, industrial, medical, commercial industries, as well as the Solar and food service industries. We use automated best-in-class machine tools and technology.

Quality Certifications: ISO 9001:2008
BARE BOARD GROUP     Booth # 120
Service Categories: Fabricating - Printed Circuit Boards • Printed Circuit Boards - Aluminum Clad • Circuits - Flexible • Prototypes - Fabrication • Prototypes - Electronic

Prototype through production, BBG is dedicated to providing quality PCB's built domestically & offshore. Rigid, Rigid Flex, Flex & Metal Clad PCB's. ITAR Registered (Domestic & Offshore), Military and Aerospace production. Specializing in RF; Medical; LED Lighting, Automotive and ITAR applications. BBG is also WEE, UL and RoHS Compliant and a Minority Business Enterprise.



Quality Certifications: ITAR • ISO 9001:2008 • TS 16949 • ISO 14001
BATESVILLE PRODUCTS INC.     Booth # 106
Service Categories: Castings - Permanent Mold • Castings - Aluminum • Castings - Zinc

Aluminum & zinc castings, engineering assistance, in-house tooling, machining & assembly. Castings from a few ounces to 80 lbs. Quantities from 500 to 150,000.



Quality Certifications: ISO 9001:2008
BOEHM PRESSED STEEL CO.     Booth # 209A
Service Categories: Stampings - Metal • Stampings - Progressive Die • Stampings - Deep Drawn Shells

Complete die design to precision metal stampings and assemblies, welding robotic & welding resistance. Single hit press line. Short run & high volume stampings. In-House tooling.



Quality Certifications: ISO 9001:2008 WITH DESIGN
BOKER'S INC.     Booth # 437
Service Categories: Washers • Stampings - Shims • Stampings - Metal • Stampings - Short Run • Stampings - Progressive Die

An owner operated custom manufacturer of stampings and non-standard washers, spacers and shims since 1919. With over 2,000 available materials our customers have endless possibilities with fast delivery.

Quality Certifications: AS 9100 • ISO 9001:2008 • WBE
BONNELL ALUMINUM (DIV.- AACOA/FUTURA)     Booth # 213
Service Categories: Fabricating - Aluminum Extrusions • Metal Finishing - Anodizing • Cutting - Tube & Pipe • Welding - MIG • Machining - CNC Milling & Turning

We are a leader in aluminum extruding, fabricating and anodizing. We are recognized for providing superior quality fabricated aluminum extrusions along with exceptional customer service. Our highly trained employees are committed to provide value to customers for their custom aluminum extrusions, specialty fabrication or direct job-shop anodizing requirements.



Quality Certifications: ISO 9001
BTW INC.     Booth # 429
Service Categories: Assemblies - Electronic • Assemblies - Printed Circuit Boards • Assemblies - Turnkey • Assemblies - Electromechanical • Surface Mount Technology - Assembly

Veteran Owned Small Business. Capabilities Include: Rigid/Flex PCB Assembly; Conformal Coating & Potting; Integration, Mechanical Assembly & Box Builds; Test Fixture Development, Product Testing, Burn-In, ESS; Global Supply Chain Management: Third Party Logistics; Clean Room Manufacturing. Support Medical/Bio-Tech, Mil/Aero, Communications and Industrial Markets.

Quality Certifications: ISO 9001:2008, 13485:2003 • FDA & ITAR REGISTERED • IPC A-610D CLASS 2&3 • IPC-J-STD
BURTON INDUSTRIES     Booth # 128
Service Categories: Assemblies - Printed Circuit Boards • Surface Mount Technology - Assembly • Engineering & Technical Services • Assemblies - Turnkey • Electronics - New Product Development

PCBA's and Box Builds! Low/medium - volume high mix. Burton's Mission Statement: We provide superior customer service and value to enhance our Customer's position in the marketplace. Our message to you is simple - Talk to us! How can we help you be more successful and achieve your goals? We have been helping our customers for over 35 years.

Quality Certifications: ISO 9001:2008 • ISO 13485:2003 • IPC-A-610 • IPC-J-STD
BUTLER TECHNOLOGIES INC.     Booth # 107
Service Categories: Switches - Membrane • Labels, Tapes & Decals • Screen Printing • Nameplates, Dials & Panels • Prototypes - Electronic

For over 25 years Butler Technologies has been providing screen/digitally printed Membrane Switches, Overlays & Labels. Additional products and processes include printed electronic components, dials & gauges, rubber keypads & laser cutting service. Please ask about our Rapid Prototype Program.



Quality Certifications: ISO 9001 • UL APPROVED • ITAR • CSA APPROVED
CARDINAL ALUMINUM CO.     Booth # 111
Service Categories: Extrusions - Aluminum • Metal Finishing - Anodizing • Fabricating - Aluminum Extrusions • Powder Coating

Custom aluminum extrusions; brite dip, color & architectural hard coat anodizing & powder coating, complete fabricating capabilities.



CGI AUTOMATED MANUFACTURING INC.     Booth # 327
Service Categories: Fabricating - Sheet Metal • Fabricating - Aluminum • Fabricating - Stainless Steel • Laser Cutting • Welding - Robotic

ISO 9001-2008 Certified Metal Fabrication manufacturer of complex fabrications, weldments and contract manufacturing utilizing "state-of-the-art" automation for laser cutting, forming and robotic welding. Customer base includes energy, automation, industrial, lighting and transportation industries.



Quality Certifications: ISO 9001:2008
CLOW STAMPING CO.     Booth # 427
Service Categories: Stampings - Short Run • Laser Cutting • Fabricating - Sheet Metal • Prototypes - Stamping • Welding & Weldments

Custom Short Run Metal Stampings. Material up to .375". In house tooling. Laser Prototyping. Value added - machining, grinding, hardware, assembly. Weldments - spot, robotic, heli-arc, wire feed, cold-wire tig, brazing and silver soldering. Outside services - heat treating, plating, painting, silk screen. Quick turnaround - estimating, tooling, and production.

Quality Certifications: ISO 9001:2008
COMPUTER AIDED TECHNOLOGY     Booth # 218
Service Categories: Rapid Prototyping • CAD/CAM Software • CAD/CAM Training • 3D Printing

From SolidWorks 3D CAD Software & Training to Stratasys 3D Printers, CATI is able to create a competitive advantage for manufacturing clients by leveraging an industry-experienced team & leading technology solutions.

COUNTERPART INC.     Booth # 440
Service Categories: Fabricating - Sheet Metal • Laser Cutting • Coatings - Metal • Welding & Weldments • Assemblies

Incorporated in 1995, Counterpart, Inc. has spent the last 20-plus years investing in people, equipment, and our community. Specializing in laser, precision punching, bending, insertion, welding and painting, Counterpart, Inc. is the region's premier metal fabricator to add value to your supply chain.

Quality Certifications: ISO 9001:2015 CERTIFIED
CRADDOCK FINISHING CORP.     Booth # 108
Service Categories: Metal Finishing - Painting • Plastics - Painting • Shielding - EMI/RFI • Powder Coating • Pad Printing

Contract production painting (Metal/Plastics) - Powder, Liquid, CARC, Teflon, and EMI/RFI Shielding. Chemical pre-treatment including RoHS Chromate, Blasting, Pad Printing, Silk-Screening, Mask Making, High-Bake capability and Blister Packaging.



Quality Certifications: ISO 9001:2008 • CONTROL PLANS • FEMA • FLOW CHARTS - SPC
D3 TECHNOLOGIES     Booth # 403
Service Categories: CAD/CAM Software • CAD/CAM Training • CAD Design Services • Rapid Prototyping • 3D Printing

We help clients design better and manufacture better through training, consulting, support and software solutions. D3 Technologies is one of the largest and most accomplished Autodesk manufacturing partners in North America and the leader in Fusion 360; D3 can partner with your company to help take its manufacturing processes to a new level of efficiency.

DA/PRO RUBBER INC.     Booth # 112
Service Categories: Rubber Molding • Plastics - Injection Molding • Silicone / Rubber - Liquid Injection Molding • Rubber To Metal Bonding • Rubber - Compression Molding

5 facilities for compression/injection molding - high-quality custom rubber, TPE, & plastic components molded to precision tolerances such as diaphragms, seals, connectors, molded shapes, rubber to metal parts for medical device, electronic & aerospace industries. Class 10,000 cleanroom - chemists & engineers assist in optimal moldability. sales@daprorubber.com



Quality Certifications: ISO 9001
DAKOTA AUTOMATION     Booth # 329
Service Categories: Machining - CNC Milling & Turning • Screw Machining - Swiss/CNC Swiss • Machining - Production • Machining - Large Parts • Engineering & Technical Services

We run a state-of-the-art manufacturing facility, with complete shop capabilities including the latest CNC machining, welding and assembly technology. We have the ability to work on any size project. We offer top quality and price competitive machining and engineering services for prototypes, low volume runs, high volume runs and any automation needs you have.

DCA MANUFACTURING     Booth # 333
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Electromechanical • Electronics - New Product Development • LED's • Printed Circuit Boards - Aluminum Clad

"Women Owned", High Quality PCB assembly and Electronics Manufacturing Services (EMS). Prototype to High Volume Production. Surface mount, through hole, LED assembly, box builds, PCB testing, conformal coating. Wisconsin Manufacturer of the Year winner & Circuits Assembly award winner. IPC-610 training facility, J-STD-001, ANSI/ESD-S20.20, IPC Class 3, SMTA member, UL.

Quality Certifications: ISO 9001:2015 • ISO 13485:2003 • IPC-A-610E • WBE
DECO PRODUCTS CO.     Booth # 236
Service Categories: Castings - Die, Zinc • Castings - Die • Castings - Zinc • Metal Finishing - Electrostatic Painting

Functional precision zinc die castings, all zinc alloys 2, 3, 5, 7 and ZA-8; fractional ounce to 8 lbs. In plant powder coatings. Additional plating processes, production machining, assembly and quality systems. USA made for any industry including transportation, HVAC, fluids, tools, fasteners, window/door, furniture, medical, military, etc.



Quality Certifications: ISO 9001:2008 • ITAR
DOUGLAS CORP.     Booth # 335
Service Categories: Nameplates, Dials & Panels • Switches - Membrane • Plastics - Injection Molding

Designs and manufactures molded plastic nameplates, decorative trim, graphic overlays, membrane switches, decals and domed Urocals. Capabilities include design, tool build, molding, electroplated finishes, metalizing, painting, hot stamping, pad printing, ultrasonic welding, component assembly.

Quality Certifications: ISO/TS 16949 • ISO 9001:2008 • General Motors Cert.
ELECTRONIC SYSTEMS INC.     Booth # 343
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Turnkey • Surface Mount Technology - Assembly • Assemblies - Electronic • Assemblies - Electromechanical

We've been providing Legendary Service to our customers for over 35 years. Founded in 1980, we provide a full range of electronic manufacturing services (EMS) to original equipment manufacturers (OEMs) in the industrial, commercial, medical, energy and HVAC markets.

Quality Certifications: ISO 13485:2003 • ISO 9001:2008 • ITAR
EPILOG LASER     Booth # 229
Service Categories: Lasers • Laser Cutting • Laser Engraving • Laser Marking • Bar Coding

An industry leader in design of laser engraving, cutting & marking systems, manufacturers of the Epilog Zing, Mini, Helix, Fusion and FiberMark series of laser systems.



Quality Certifications: ANSI STANDARDS • IEC • CE • CFR 21
EVANS     Booth # 115
Service Categories: Stampings - Deep Drawn Shells • Eyelets & Drawn Shells • Stampings - Metal

Conventional multi-station transfer presses. Custom designed progressive type presses. Thin-walled drawn metal shells, tubular parts and precision metal stampings.



Quality Certifications: ISO 9001:2015
FALCON PLASTICS     Booth # 320
Service Categories: Plastics - Injection Molding • Plastics - Blow Molding • Plastics - In Mold Labeling & Decorating • Plastics - Elastomeric Overmolding • Plastics - Hot Stamping & Screening

An innovative leader in the custom injection and blow molding industry specializing in services from design assistance through distribution. Servicing the manufacturing industry since 1975, we pride ourselves on our long term relationships with our customers and associates.



Quality Certifications: ISO 9001:2008 • BSI CERTIFIED • FDA
FATH INC.     Booth # 324
Service Categories: Gaskets, Seals, Washers & O-rings • Hinges • Machining - Castings

A globally leading innovator, manufacturer and direct to market Enterprise of Hardware. Our products can be found in the most exotic applications with our core markets in the automation Industry, Solar Industry and the Sheet Metal Enclosure/Housing Industry. Our designs are made to bring our customers in the most competitive position with the highest quality.

FOX VALLEY METROLOGY     Booth # 317
Service Categories: Calibration & Metrology • Quality Systems • Measurement & Inspection • Rework & Repair - Electronic • Rework & Repair - Mechanical

We are a partner to the Quality Assurance Departments of thousands of organizations worldwide. By offering calibration, new equipment sales and services all under one roof, we are a single-source partner providing comprehensive coverage over the life cycle of all your precision measuring equipment.

Quality Certifications: ISO 17025 • CLASS A • ANSI STANDARDS
GALLAGHER FLUID SEALS INC.     Booth # 224
Service Categories: Gaskets, Seals, Washers & O-rings • Rubber Molding • Prototypes - Rubber • Extrusions - Rubber

For over 60 years, we have consistently provided superior technical solutions specializing in O-rings, seals, custom PTFE and molded shapes with the lowest total cost of ownership. Creating competitive advantages for our customers in their products or markets is what makes Gallagher "The Seal Specialist". 2nd location: 21 Deer Park Dr., East Longmeadow, MA, Ph: 800-356-0061



Quality Certifications: ISO 9001:2008 • ISO 14001-2004
GARDNER MFG. CO.     Booth # 235
Service Categories: Fabricating - Sheet Metal • Fabricating - Aluminum • Welding & Weldments

Contract sheet metal fabrication, UL enclosures Type 1 and 3R, weldments assembly, painting, powder and wet, fabrication of copper bus bars, electrical enclosures & 3D design services. Minority Owned Business Enterprise.

Quality Certifications: UL 508A / UL 1332 • CAN/CSA C22.2 • UL TYPE 1 & 3R ENCLOSURES • ISO 9001:2008 / ITAR
GAUTHIER INDUSTRIES INC.     Booth # 344
Service Categories: Fabricating - Sheet Metal • Stampings - Metal • Electronic Enclosures • Powder Coating • Assemblies

Leading producer of sheetmetal fabrications and stampings utilizing all material types. Significant enclosure production. Punching, forming, welding, grinding, finishing, powder coating, assembly, and silk screening. Lasers, CNC turret presses, 20-250 ton punch presses, 15-195 ton press brakes. Short lead times. Customer satisfaction guaranteed.

Quality Certifications: ISO 9001:2008 • UL LISTED • UL 508 • ETL
GEMSTAR FORMED PLASTIC COMPONENTS     Booth # 220
Service Categories: Fabricating - Plastic • Plastics - Rotational Molding • Plastics - Thermoforming/Vacuum Forming

Specializes in thermoforming, rotational molding, line bending, and custom plastic fabrication. By having 3-axis, 5-axis and other secondary equipment we can fabricate your custom plastic part, ready for use.

GIC LTD.     Booth # 241
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Electronic • Assemblies - Electromechanical • Assemblies - Turnkey • Mechanical & Electronic Design

Specializing in Turnkey Contract Electronic Manufacturing that includes: Electronic Assembly-Mixed-SMT-BGA-Micro-BGA; Electro-Mechanical Box Build; Electronic Circuit Design; Firmware Development; Mechanical Design; Full Functional & In-Circuit Testing; Chip Programming; Encapsulation/Conformal Coating.

Quality Certifications: ISO 9001:2008 • ISO 13485:2003 Medical • ANSI/ESD 20.20 • UL, CSA, CE & ITAR
GPC ELECTRONICS     Booth # 133
Service Categories: Assemblies - Electronic • Assemblies - Turnkey • Wire & Cable Harnesses • Surface Mount Technology - Assembly • Assemblies - Printed Circuit Boards

Since our inception in 1985, we've had a track record of working with leading OEMs in North America, Europe, Asia & the Pacific. We are able to customize processes, delivering unique solutions to our customers, providing them with a competitive advantage & positive outcomes. We are a full service EMS and cable harness provider with three manufacturing sites globally.



Quality Certifications: ISO 9000 • ISO 14000 • ISO 13485 • ISO/TS 16949
GRACIOUS LIVING INNOVATIONS INC.     Booth # 332
Service Categories: Plastics - Extruded Profiles • Extrusions - Plastic

A North American custom profile extrusion company and a recognized international leader in thermoplastics profile design, engineering, processing and value-added manufacturing. We have over 40 years of experience helping our customers discover unique and innovative possibilities in plastic extrusion.

Quality Certifications: ISO 9001:2008
GRAPHICAST INC.     Booth # 117
Service Categories: Castings - Permanent Mold • Castings - Graphite Mold • Castings - Zinc • Castings - Non-Ferrous

Zinc alloy castings using unique graphite permanent mold process. Low cost graphite molds make this process ideal for low to medium quantities. Eliminate expensive CNC hog-outs, high tooling costs, and long lead-times. In-house design, mold building and precision CNC machining. Cosmetic and protective finishes available.



Quality Certifications: ISO 9001:2008
HARRINGTON EMS     Booth # 206
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Electronic • Surface Mount Technology - Assembly • Rework & Repair - Electronic

Electronic Mfg. Services - We offer a wide range of services including: Surface Mount, Through-Hole, Mixed Technology, RoHS compliant/Lead Free, Conformal Coating, Electronic Assembly, Testing, Box Builds, Repair Depot, Supply Chain Management, Order Fulfillment and various Engineering Services. Our experience and dedication to our partners is second to none.

Quality Certifications: ISO 9001:2008 • ANSI/IPC-A-610 STANDARD
HARVEY VOGEL MFG. CO.     Booth # 302
Service Categories: Stampings - Metal • Fabricating - Sheet Metal • Assemblies • Prototypes - Rapid Sheet Metal • Welding & Weldments

Complete Metal Service Contractor. Metal Stamping, Fabrication, Machining & more. Metal Stamping experts for quality fabrication services since 1942. We excel at producing the most difficult stampings and metal fabrications for a wide variety of industries. Our niche is short to medium run quantities of 1,000 pieces to 50,000 pieces annually.

Quality Certifications: ISO 9001:2015 • ISO 14001
HEROLD PRECISION METALS LLC     Booth # 319
Service Categories: Fabricating - Sheet Metal • Assemblies - Electromechanical • Assemblies - Mechanical • Metal Cabinets & Enclosures • Prototypes - Rapid Sheet Metal

Precision Sheet Metal Fabricator with core competencies that include, but are not limited to Design Engineering input up to any level a customer desires, fabrication, finish, and electrical / mechanical assembly up to any level a customer would desire. We offer quick turn prototype, pre-production, and production support up to and including Kanban / JIT programs.

Quality Certifications: ISO 9001:2008 • ITAR • RoHS • UL CERTIFIED
HI-TEC FINISHING LLC     Booth # 433
Service Categories: Plastics - Painting • Shielding - EMI/RFI • Plastic Coatings - EMI/RFI

Finishing and Coatings company; mature and experienced company in the contract finishing industry. The company’s ground floor approach has enhanced its reputation as a dependable high quality contractor. We have the capacity and experience to work with a variety of base materials and volumes. Whether for prototype, short run, long run, all jobs are important to us. At Hi-Tec Finishing, 100% satisfaction is not a goal, but a guarantee.

Quality Certifications: ISO 9001:2008
INCERTEC     Booth # 406
Service Categories: Metal Finishing - Anodizing • Metal Finishing - Electroplating • Metal Finishing - Precious Metal Plating • Metal Finishing - Passivating • Metal Finishing - Selective Plating

We are among the largest NADCAP Accredited plating and metal finishing companies in America. Incertec has approvals from many of the world's biggest names in the fields of aerospace, medical devices and electronics. Certifications: ISO 9001, ISO 14001, AS9100, ITAR, RoHS Compliant, Federal Firearms License.

Quality Certifications: NADCAP ACCREDITED • AS9100 REV C • ISO 9001:2000 • ITAR / NADCAP
INDUSTRIAL MODERN PATTERN & MOLD     Booth # 131
Service Categories: Rapid Prototyping • Urethanes - Molded/Extruded • Tooling - Models & Prototypes • Plastics - Low Volume • Prototypes - Rapid Casting

IMPM is a full-service prototyping bureau specializing in product development and low-volume production. Our core competencies include Stereolithography, cast urethane and silicone tooling (home of the 100 shot guarantee), aluminum/P20 steel tooling, and injection molding. Let IMPM set your standard.

INNOVATIVE ELECTRONICS CORP.     Booth # 219
Service Categories: Assemblies - Electronic • Assemblies - Printed Circuit Boards • Assemblies - Electromechanical • Prototypes - Electronic • Assemblies - Electrical

Full service Electronics Contract Mfgr. Electronics & electro-mechanical assemblies to customer specs, top quality workmanship at the lowest cost. Prototypes, small & medium production of surface mount technology, through hole & mixed technology. Highly skilled staff to assist in product development & product mfg. Deeply committed to customer service.



Quality Certifications: IPC-A-610D • IPC/WHMA-A-620 • ISO 13485 • J-STD-001
INSULFAB PLASTICS INC.     Booth # 215
Service Categories: Plastics - CNC Machining • Plastics - Sheet, Rod & Tube • Stampings - Progressive Die • Plastics - Screw Machining • EDM - Wire

Specializing in precision CNC machining, turning & die cutting of thermoplastics, thermosets, composites, films & fibre. Prototypes, Turnkey Assembly. Design & fabrication of specialty assembly and process tooling for the PCB industry including wire EDM.

Quality Certifications: ISO 9001:2008 • ITAR
ISLAND TOOL & DIE INC.     Booth # 411
Service Categories: Machining - CNC Milling & Turning • Machining • Grinding - Surface • Heat Treating • Metal Finishing - Electropolishing

A contract job shop located in Pine Island, MN, Island Tool & Die specializes in precision production machining; automated tooling; custom tooling and fixtures; blank and pierce, form, progressive dies, and prototype work. We work with a wide variety of steels, aluminum, plastics, and exotic materials. We serve our customers with the best in precision-machined parts.

KATO CABLE     Booth # 340
Service Categories: Wire & Cable Harnesses • Assemblies - Cable • Assemblies - Electromechanical

Complex wire harnesses and cable assemblies for the industrial, speciality vehicle, medical, power sports and power generation markets.

Quality Certifications: ISO 9001 • UL RECOGNIZED • ITAR
K-TEK WISCONSIN / K-TEK CAROLINA     Booth # 124
Service Categories: Stampings - Progressive Die • Fabricating - Sheet Metal • Assemblies - Electromechanical • Welding - Robotic • Wire Forming & Fabricating

We are the world-class manufacturers of metal components for the Major OEM markets. We have presses from 30 to 400 tons. Specializing in short to long run stampings with a variety of globally competitive tooling options. Sheet metal fabrication up to .500" thick. We also provide WIRE FORMING capabilities with Round / Square wire. .080 - .625 thick.

Quality Certifications: ISO 9001:2008
LAVA DESIGN     Booth # 417
Service Categories: Industrial Design Services • Mechanical & Electronic Design • CAD Design Services • Engineering & Technical Services • Electronics - New Product Development

We design engineers' products, digital platforms and support content that engage today’s consumer. LAVA's process is a cost effective approach to product development. We customize it to your needs enabling your company to benefit from a highly strategic and sophisticated design approach.

LAVELLE INDUSTRIES INC.     Booth # 309
Service Categories: Rubber Molding • Rubber - Transfer Molding • Plastics - Injection Molding • Rubber To Metal Bonding • Rubber Stampings

Provides Lean manufactured solutions for your custom molded rubber or plastic applications. We offer a comprehensive array of molding equipment and on-site R&D lab.

Quality Certifications: ISO 9001
LCS PRECISION MOLDING INC.     Booth # 409
Service Categories: Plastics - Injection Molding • Tooling - Plastic Injection Molding • Packaging

A custom injection molder serving customers with the highest quality plastic parts. LCS molds plastics parts for a variety of industries including window and door manufacturing and hardware companies, motorsports, industrial furniture, recreation and many other applications. We are ISO 9001:2008 certified company as well as a Minority Business Enterprise.

Quality Certifications: ISO 2008 • MBE CERTIFIED
LEE SPRING     Booth # 237
Service Categories: Springs - Coil • Springs - Flat • Springs - Wave • Stampings - Fourslide

Springs in stock ready to ship or made to your specifications. Large selection of stock Compression, Extension, Torsion, HEFTY™ Die, REDUX™ Wave, LeeP™ Plastic Composite, MIL-SPEC, Belleville Washer, Battery and Constant Force Springs. Custom Springs, Stampings, Wire Forms and Fourslide design and manufacturing. Prototypes through large production runs.



Quality Certifications: ISO 9001 • RoHS / REACH • MIL SPEC AS24585 • MIL SPEC AS24586
MAVERICK ENGINEERING AND MANUFACTURING     Booth # 431
Service Categories: Assemblies - Electrical • Assemblies - Cable • Cable & Wire Manufacturing • Electronic Enclosures • Prototypes - Electronic

Specializes in Wire Assemblies and Control Panel Systems for a variety of industries.

MERCURY CORP.     Booth # 210
Service Categories: Fabricating - Sheet Metal • Metal Cabinets & Enclosures • Assemblies - Turnkey • Fabricating - Aluminum • Fabricating - Stainless Steel

AN INTEGRATED SOLUTION TO YOUR SUPPLY CHAIN - we build custom racks, frames, enclosures, plastics & stamping assemblies. CORE PROCESSES: Design, Metal Fabrication, welding of all types of metals, Plastic Injection Molding, Finishing, Turn-Key Assemblies & KAN BAN.



Quality Certifications: ISO 9001:2008 • ISO 13485 • AS 9100 • ITAR REGISTERED
MERRILL MFG. CORP.     Booth # 121
Service Categories: Wire Forming & Fabricating • Welding - Resistance • Baskets • Metal Finishing - Zinc Plating • Metal Finishing - Painting

We provide engineering assistance and manufacturing expertise for both stainless steel and basic welded wire & formed wire products with our exclusive MerriBrite zinc plating for your parts. Stainless steel specialty products. Complex welded assemblies.



Quality Certifications: ISO 9001:2008
METAL SERVICES     Booth # 421
Service Categories: Fabricating - Heavy Steel & Plate • Fabricating - Sheet Metal • Tube Bending & Fabricating • Laser Cutting • Welding & Weldments

We have a 33 year history of providing quality metal fabricated products to customers in a variety of industries. Our capabilities include tube bending, brake forming, laser/plasma cutting, rolling, and welding of aluminum, steel, and stainless. We have a large range of equipment and extensive experience in creating any fabrication needed.

Quality Certifications: ISO 9001-2015 • AWS D1.1
MICRO CONTROL COMPANY     Booth # 233
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Turnkey • Assemblies - Electronic • Assemblies - Electromechanical • Prototypes - Electronic

Our Electronic Manufacturing Service is an ISO 9001:2008 registered contract-manufacturing service providing high-quality electronic assembly that meets each customer's unique requirements. Capabilities include low/medium/high-volume surface-mount, through-hole, and mixed technologies, with BGA rework with X-ray; and mechanical box-build assembly.

Quality Certifications: ISO 9001:2008
MICRO MACHINE INC.     Booth # 416
Service Categories: Machining - CNC Milling & Turning • Industrial Design Services • Fabricating - Sheet Metal • Welding & Weldments • Powder Coating

An Engineering and Manufacturing firm Specializing in value driven Milling, Turning, Tube Bending, Sheet Metal, Welding, Powder Coating, and assembly; all located within our 36,000 Sq. Ft. facility located in Greenfield Minnesota.

Quality Certifications: VOSB
MID-WEST SPRING & STAMPING     Booth # 231
Service Categories: Springs - Coil • Stampings - Fourslide • Stampings - Metal

Springs from wire diameters to 2", wire forms from .010" to .250", clock, die & special springs, formed parts, flat springs, spring washers & stampings.



Quality Certifications: ISO 9001:2008
MILLERBERND SYSTEMS     Booth # 341
Service Categories: Fabricating - Sheet Metal • Laser Cutting • Cutting - High Definition Plasma • Welding - Robotic • Bending - Custom

We are a full-service metal fabrication and welding company located in Winsted, MN. Established in 1933, we serve companies in the food & dairy, energy, agriculture, packaging, and construction industries. Our capabilites include design & engineering and fabrication services such as welding, machining, cutting, 20' 716 ton forming, robotic welding, and assembly.

Quality Certifications: AWS D1.1 • AWS D1.2
MINNESOTA GRINDING INC.     Booth # 342
Service Categories: Grinding - Precision • Grinding - I.D. & O.D. • Thread Grinding • Grinding - Centerless • Grinding

We have delivered precision grinding of machined parts since 1959. Located in the Minneapolis/St. Paul metro area, our motto, Exceeding Your Expectations represents our focus on delivering quality solutions, on time. Our reputation is proven daily. We get most of our new business by referral. Let us Exceed Your Expectations!

MOELLER INDUSTRIAL     Booth # 211
Service Categories: Plastics - Rotational Molding • Plastics - Low Volume • Fabricating - Aluminum • Prototypes - Plastic • Rapid Prototyping

Custom aluminum fuel tanks, rotationally-molded fuel tanks, structural components, housings, specialized bins. Contract manufacturer. EPA-compliance experts. Open stock lines include fuel tanks, fuel delivery systems, water and waste tanks, waste oil bins, and battery boxes/accessories.



Quality Certifications: ISO 9001:2008 • CE
MTI MANUFACTURING INC.     Booth # 408
Service Categories: Machining • Machining - CNC Milling & Turning

Precision Machine Shop with 12 Machining Centers and One CNC Lathe.

Quality Certifications: ISO 9001:2008
NEUMAN ALUMINUM IMPACT EXTRUSION INC.     Booth # 338
Service Categories: Extrusions - Impact • Fabricating - Aluminum • Machining - Aluminum • Assemblies - Mechanical • Forgings - Cold

We are a leading manufacturer of aluminum impact extrusions for many different markets including automotive, defense, and electrical. Benefits include increased strength from cold working, uniform grain structure (no voids), and different wall and bottom thicknesses. We have in-house heat treatment and final CNC machining. We are ISO/TS 16949 & ISO 14001 certified.

Quality Certifications: ISO/TS 16949
NINJA CIRCUITS     Booth # 304
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Turnkey • Engineering & Technical Services • Prototypes - Electronic • Electronic Components

We offer a complete range of prototyping services to meet your needs, specializing in quick-turn, proof-of-concept and one-time builds. Ninja Circuits has the resources including Assembleon iFlex, vapor phase re-flow oven technology, conformal coating, IPC trained operators and over 30 years of industry experience. If you need it fast, call Ninja!

Quality Certifications: AS 9100
NORTHERN IRON & MACHINE     Booth # 405
Service Categories: Castings - Ductile Iron • Machining - Castings • Castings - Gray Iron • Machining - CNC Milling & Turning • Castings - Sand

A high quality supplier of machined and rough ductile, gray, and austempered ductile iron castings.

Quality Certifications: ISO 9001:2008 • ABS CERTIFIED
PACE INDUSTRIES     Booth # 422
Service Categories: Castings - Die, Aluminum • Castings - Die, Magnesium • Castings - Die, Zinc • Plastics - Injection Molding • Engineering & Technical Services

North America’s leading full-service high pressure aluminum die casting, zinc die casting and magnesium die casting manufacturer. Strategically located throughout North America, Pace Industries is more than a die casting company. We are a solutions provider offering a wide array of capabilities and services including plastic injection molding.

Quality Certifications: ISO 9001:2008
PCM PRODUCTS INC.     Booth # 100
Service Categories: Photochemical Etching & Machining • Shielding - EMI/RFI • Chemical Milling

We produce precision, burr/stress free parts, .1" thick down to .0001" thick. In-house plating, forming, heat treating and assembly. Competes with laser cutting and EDM. COMPLIANT TO ISO 9001:2000 & AS9100B & ANSI/ASQ Z1.4-2003.



Quality Certifications: MIL-I-45208
PEQUOT TOOL & MFG. INC.     Booth # 201
Service Categories: Machining - CNC Milling & Turning • Fabricating - Sheet Metal • Laser Cutting • Screw Machining - Swiss/CNC Swiss • Machining - Robotic

Precision Machined & Fabricated parts. Turning (Swiss & multitasking, mill/turn), Milling (horizontal & vertical), Laser cutting & engraving, Punching, Forming, Stamping, Welding & Assembly.

Quality Certifications: ISO 9001:2008 • AS 9100:2009 REV C
PERIN MACHINING COMPANY     Booth # 308
Service Categories: Machining - Production • Screw Machining - Multi Spindle • Machining - Rotary Transfer • Machining - CNC Milling & Turning • Machining - Multi Axis

Founded in 1980, Perin Machining Company specializes in custom screw machining, multi-spindle CNC machining, Hydromat rotary transfer machining, and CNC turning. Perin Machining Company is an ISO 9001 certified company producing component parts for the agricultural, appliance, automotive, faucet, and hydraulic industries. PPAP Compliant.

Quality Certifications: ISO 9001:2015 CERTIFIED • LEAN 5S CONCEPT CERTIFIED
PIONEER METAL FINISHING     Booth # 223
Service Categories: Metal Finishing - Anodizing • Metal Finishing - Hard Coating • Metal Finishing - Electroless Nickel • Metal Finishing - Painting • Rubber To Metal Bonding

Leading metal finisher in clear & dyed anodizing, brite dip, hardcoat, electroless nickel plating, conversion coatings, zinc & zinc rich coatings, paint, powder coat & e-coat, metal-to-rubber bonding & dry-film lubricants. Headquartered in Green Bay, WI; with locations across the United States & Mexico. We are WEEE Compliant. For information contact sales@pioneermetal.com.



Quality Certifications: ISO 9001:2008 • AS 9100 • NADCAP/ITAR/ELV/RoHS
PJ TUBE-PHILLIPS & JOHNSTON INC.     Booth # 311
Service Categories: Tube Bending & Fabricating • Laser Machining • Fabricating - Steel • Cutting - Tube & Pipe • Machining - Tube Piercing & Tubing

PJ Tube (Phillips & Johnston) is a manufacturer and precision fabricator of tubular metals. Several strategic facilities deploying the most advanced technology offering quality manufacturing, precision fabricating & inventory solutions for tubular metals in stainless steel, specialty alloys, carbon steel, aluminum & red metals. One-stop shop for all specialty tubing needs.

Quality Certifications: ISO 9001:2008
PLASTICS INTERNATIONAL     Booth # 339
Service Categories: Plastics - Sheet, Rod & Tube • Plastics - CNC Machining • Plastics - Low Volume • Prototypes - Plastic • Polyurethane - Parts

We are a Global Supplier of Machine Grade and High Performance Grade plastics in sheet, rod, tube & film. Materials include Nylon, Delrin, Teflon, PEEK, UHMW, etc. Cut to size and certifications available.

PLS INC.     Booth # 415
Service Categories: Die-Cutting - Felt, Cork & Rubber • Gaskets, Seals, Washers & O-rings • Labels, Tapes & Decals • Die-Cutting • Nameplates, Dials & Panels

A full service custom converter and printer. Our technology includes, flexographic and digital printing both UV and water based. Our converting equipment is web based and servo driven suitable for multiple web laminations and multiple die station cutting. OEM markings, adhesive gasketing and electronic shielding, barcoding, sequential#, holographics.

Quality Certifications: ISO 9001:2008
PMI LLC     Booth # 412
Service Categories: Stampings - Metal • Laser Cutting • Welding & Weldments • Fabricating - Sheet Metal • Tooling

We stamp metal parts and are a metal service center. PMI offers steel blanking, slitting, metal stamping, laser cutting, turret/punch fabrication, robotic welding and part assembly.

Quality Certifications: ISO 9001:2008
POSTHASTE DESIGN & DEVELOPMENT     Booth # 407
Service Categories: Assemblies - Electromechanical • Assemblies - Electronic • CAD Design Services • Prototypes - Electromechanical • Engineering & Technical Services

Specializing in Modular Electronic Systems, Posthaste provides design thru production services for industries including furniture, marine, RV, industrial cleaning and consumer products. Offering PCBA, housings, wiring harnesses, light assembly and complete assemblies. Abilities include LED, motor controls, wireless communications, smart devices and integrated mobile apps.

POWER ENTERPRISE     Booth # 337
Service Categories: Machining - CNC Milling & Turning • Grinding - Precision • Honing • Molds & Moldmaking - Plastic • EDM

We are your one-stop source for precision CNC parts, custom molding and mold making. Our precision machining capabilities include 3/5/7 axis CNC milling and turning, center-less and cylindrical grinding, lapping, honing and EDM. Custom molding is another specialty, including precision insert molding. Power is a U.S. company with multiple locations.

Quality Certifications: ISO 9001:2008 • ISO 14001
PRECISION ASSOCIATES INC.     Booth # 323
Service Categories: Rubber Molding • Rubber To Metal Bonding • Gaskets, Seals, Washers & O-rings • Rubber - Injection Molding • Rubber - Transfer Molding

Manufacturer of the World's Smallest O-ring! Standard & custom O-rings, X-rings, U-cups & Back-up rings. Precision molded rubber, rubber to metal, plastic bonded components, machined plastic parts for oil & gas, industrial & medical applications. In-house mold shop, Class 10,000 clean room, custom compound formulations & engineering assistance. Info@precisionassoc.com.

Quality Certifications: ISO 9001:2008
PRECISION RESOURCE     Booth # 242
Service Categories: Stampings - Fineblanked • Metal Finishing - Polishing & Plating • Tooling

A dynamic and growing company that specializes in fineblanking and secondary finishing of quality components. As a world leader in fineblanking technology, we provide cutting edge solutions to customers in a variety of industries, including automotive, electronics, off-highway equipment, cutlery, hand tools, hardware, and medical equipment.

Quality Certifications: ISO 9001 • TS 16949:2002
QUALITY MACHINING INC.     Booth # 110
Service Categories: Machining - CNC Milling & Turning • Machining - Precision CNC • Machining - Production • Grinding - I.D. & O.D.

Full service CNC machine shop, Turning Centers, Vertical Machining Centers, Horizontal Machining Centers, some I.D. and O.D. Grinding, 55 CNC machines.

Quality Certifications: ISO 9001:2008
R & B GRINDING CO. INC.     Booth # 301
Service Categories: Machining - CNC Milling & Turning • Grinding • Broaching • Heat Treating • Assemblies

With 59 years of experience as an ISO 9001:2008 certified manufacturer, we offer close tolerance machining, grinding, fabricating and assembly to large OEM manufacturers. Our 140,000 square feet of manufacturing space features: CNC Milling & Turning, Grinding – CNC, End Feed, Thru Feed, Cylindrical, Internal & Surface (Blanchard), 50 multi-spindle & single spindle Automatic Screw Machines, Welding, Assemblies from 2 - 20 pieces, and Horizontal and Vertical broaching.

Quality Certifications: ISO 9001:2008
RIVERSTAR INC.     Booth # 305
Service Categories: Assemblies - Electromechanical • Assemblies - Mechanical • Assemblies • Packaging

Providing services in the areas of complex and simple assemblies, kitting, order fulfillment, packaging and logistics. Offering a complete supply chain solution.

Quality Certifications: ANSI/ISO/ASQ 9001:2008
ROBERTS AUTOMATIC PRODUCTS INC.     Booth # 122
Service Categories: Screw Machining - Multi Spindle • Machining - CNC Milling & Turning • Machining - Precision CNC • Machining - Multi Axis • Screw Machining - Swiss/CNC Swiss

Offering precision production machining, featuring twin-spindle multi-tasking CNC turnmill centers and multi axis CNC cells, swiss, & multiple spindle screw machines.



Quality Certifications: ISO 9001:2008 • ITAR REGISTERED
ROCHESTER PRECISION MACHINE INC.     Booth # 232
Service Categories: Machining - CNC Milling & Turning • Machining - Swiss Laser & CNC Swiss • Machining - Multi Axis • Machining - Production • Machining - Cams

Swiss Turning to 38mm dia., Live Tool Turning to 16.0" dia., Live Tool Barfeed Turning to 3.0" dia., 5 Axis Milling with Probing, 4 Axis Vertical and Horizontal Milling, Production Broaching, Honing.



Quality Certifications: ISO 9001:2008
RONCELLI PLASTICS     Booth # 205
Service Categories: Plastics - CNC Machining • Assemblies - Mechanical • Rapid Prototyping • Machining - Precision CNC • 3D Printing

Since 1969 we have specialized in Precision Fabrication, CNC Machining, Die Cutting, Rapid Prototyping and Clean Room Assembly of Plastic and Non-Metallic components. Ask about our 5 axis milling capabilities.

Quality Certifications: AS 9100C • ISO 9001:2008 • ISO 13485:2003 • ITAR REGISTERED
S.W. ANDERSON CO.     Booth # 418
Service Categories: Fasteners • Assembly Hardware • Electronic Hardware • Springs - Coil • Washers

A stocking distributor and engineering representative for specialty fasteners, standard fasteners and other OEM components. Our full line of products and quality brands simplifies your ordering process and keeps your business running smoothly.

Quality Certifications: ISO 9001: 2008 CERTIFIED
SEAWAY PLASTICS ENGINEERING LLC     Booth # 202
Service Categories: Plastics - Injection Molding • Prototypes - Plastic • Plastics - Low Volume • Molds & Moldmaking - Plastic • Plastics - Painting

We are a full service plastic injection molding company specializing in prototype injection molding, low to mid volume production and mold making. We are headquartered in the Clearwater Beach/Tampa Bay area and have two manufacturing locations, Port Richey and Brooksville, Florida. Employing 160, Seaway strives to provide technology leadership and performance excellence to medical, aerospace, military, packaging, food service, industrial and consumer products.



Quality Certifications: ISO 13485:2003 / ISO 9001:2008 • ANSI/ASQ Q9001-2000 • ITAR REGISTERED • NADCAP ACCREDITED
SEVEN RANGES MFG. CORP.     Booth # 216
Service Categories: Stampings - Deep Drawn Shells • Stampings - Heavy Gauge • Stampings - High Volume • Stampings - Progressive Die • Tanks - Small Cylindrical

We are a 4 to 1 ratio deep drawn metal stamping house that is well diversified with carbon steel, stainless steel, aluminum, copper, & brass. We are known for heavy gauge, high volume stamping & can customize stamping jobs for medium volume, medium run & short run stamping jobs that will fit a customer's budget & time frame.



Quality Certifications: ISO 9001:2008 • DOD REGISTERED
SI PLASTICS INC.     Booth # 208
Service Categories: Plastics - Injection Molding • Plastics - Insert Injection Molding • Plastics - Micro Molding • Assemblies

UL certified supplier of custom, plastic injection molded parts. Located in the greater Louisville, Kentucky area with press sizes from 25 to 1000 tons, established 16 years, non-union, extremely competitive pricing, on time delivery and a single digit PPM.



Quality Certifications: ISO 9001:2008 • ISO/TS 16949
SMARTREND MANUFACTURING GROUP (SMG)     Booth # 313
Service Categories: Rapid Prototyping • Assemblies - Mechanical • Plastics - Injection Molding • Fabricating - Sheet Metal • Rubber Fabrication

We are a supply chain management company specializing in customer-specific engineered components and assemblies. We focus on collaborative efforts with customers to provide the lowest total cost of acquistion. SMG brings value to your operation with efficiently designed and manufactured parts, made to your specifications, and delivered on your schedule.

Quality Certifications: ISO 9001:2008
SMC POWDER METALLURGY INC.     Booth # 318
Service Categories: Powder Metal Parts • Gears

ISO/TS-16949:2009 certified manufacture of Powder Metal components serving a diverse customer base.



Quality Certifications: ISO/TS 16949:2009
SOHN MANUFACTURING     Booth # 238
Service Categories: Die-Cutting • Labels, Tapes & Decals • Tools, Dies & Fixtures • Fabricating - Foil, Films & Foams

Rotary die cutting equipment and rotary die converting facility and a contract converter for the medical and industrial markets.

Quality Certifications: ISO 9001:2008 • ISO 13485:2003
SOLAR ATMOSPHERES     Booth # 109
Service Categories: Heat Treating • Brazing - Vacuum Furnace • Nitriding

We offer high quality Vacuum Heat Treating services producing bright, scale-free parts with minimal distortion. Markets served include aerospace, medical, power generation, firearms & ordnance, and more. Our state-of-the-art vacuum furnaces range from lab sized to 48’. Four plants located in Souderton, PA, Hermitage, PA, Greenville, SC, and Fontana, CA.



Quality Certifications: NADCAP • AS 9100C • BOEING / P & W / ROLLS ROYCE • G.E. S-1000
STACKER 3D PRINTERS     Booth # 430
Service Categories: 3D Printing • Prototypes - Plastic • Plastics - Low Volume • Industrial Equipment

We design, manufacture, and sell industrial grade 3D printers and filament. Our printers are found on the floors of major manufacturers, college campuses, research labs, and design shops.

Quality Certifications: CE
SURFACE FINISHES     Booth # 125
Service Categories: Optical Polishing • Lapping • Machining - Single Point Diamond • Grinding - I.D. & O.D. • Honing

Precision Finishing, Fabrication and Refurbishment Services, Chemical Mechanical Polishing, Optical Quality Polishing, Precision Lapping, Single Point Diamond Machining, Precision Low Stress Grinding, Precision Honing - Large and Small Bore. See our website for typical results.



Quality Certifications: ITAR REGISTERED
SWOOSH TECHNOLOGIES     Booth # 105
Service Categories: CAD/CAM Software • Software For Job Shops & Manufacturers • CAD/CAM Training • Measurement - Software

We are your premier Product Lifecycle Management (PLM) solutions provider delivering software, support & training to give your business its competitive advantage. Headquartered in St. Louis, MO with regional support locations in Houston, Dallas, Chicago, New York & Nashville, we bring the latest CAD, CAM, CAE & PDM solutions to your front door.



TAYLOR METALWORKS INC.     Booth # 306
Service Categories: Machining - Precision CNC • Castings - Aluminum • Prototypes - Machining • Castings - Ferrous • Assemblies

A full service CNC Machine shop specializing in complex machining of non-ferrous and ferrous castings and all casting processes. Prototype through production quantities. Also, contract machining of components from plate, bar and tubing materials. Full Project Management capabilities including design assistance and value added services.

Quality Certifications: ISO 9001:2015
TECHNICAL DIE-CASTING INC.     Booth # 230
Service Categories: Castings - Die, Aluminum • Castings - Die • Castings - Aluminum • Castings - Non-Ferrous

Full service Aluminum Die Caster located in SE Minnesota, committed to total Customer Satisfaction. Quality Castings, Competitive Prices, On Time Deliveries. 100% Process Monitoring. In-house Engineering, Design Assistance, Machining, Tooling, Value Added Operations and Flexible Stocking Programs. Providing reliable solutions since 1975.



Quality Certifications: ISO 9001 CERTIFIED
TECNOVA ELECTRONICS INC.     Booth # 226
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Electronic • Surface Mount Technology - Assembly • Electronics - New Product Development • Testing - Printed Circuit Boards

We are an ISO Certified, Turn-key Electronic Contract Manufacturer and Design Engineering firm, specializing in product design and mobile apps, automated test systems, and manufacture of complex electronic assemblies for commercial and industrial applications.

Quality Certifications: ISO 9001:2008 • UL 508 • J-STD-001 • IPC-A-610
TEMPCO MFG. CO. INC.     Booth # 228
Service Categories: Stampings - Metal • Fabricating - Sheet Metal • Assemblies - Mechanical • Welding & Weldments • Tools, Dies & Fixtures

With over 70 years of experience, Tempco produces precision metal stampings, precision sheet metal fabrications and mechanical assemblies for clients across numerous industries. Tempco offers a complete tool & die room to go along with secondary services to be your one stop shop for metal stampings and sheet metal fabrications.



Quality Certifications: AS9100C • ISO 9001:2008
TRIENT TECH. / A DIVISION OF EIS INC.     Booth # 135
Service Categories: Adhesives • Gaskets, Seals, Washers & O-rings • Die-Cutting • Shielding - EMI/RFI • Packaging

OEM & Aftermarket contract manufacturer of thin film applications including acrylic foam tapes, transfer adhesives, thermal & electrically conductive tapes, water indicator tapes, adhesive backed shielding foils, vinyl tapes & more. From concept to finished product; services include Custom laminating up to 63”, Jumbo roll slitting to 63”, Plotter & Flatbed die cutting to 5’ x 10’, Precision rotary die cutting to 24”, tolerances +/- 0.003”, Offset, Flexographic & Digital printing.



Quality Certifications: ISO 9001:2008 • ISO/TS 16949:2009 • ISO 13485:2003 • ISO 14001:2004
TUTCO     Booth # 239
Service Categories: Industrial Equipment • Assemblies - Electrical • Fans & Blowers

The world's largest supplier of open coil heating elements. We produce 35,000 to 38,000 heaters a day to meet the demands of our OEM customers. Leading the world in heating innovation, Tutco holds 80% of the U.S. Patents in open coil heating technology. Tutco heating components can be found in countless commercial applications, including refrigeration, HVAC, appliance, lab equipment and vending. We can quickly bring your project from concept to completion.

Quality Certifications: ISO 9001:2008 • ISO 14001:2004 • OHSAS 18001:2007
TWIN CITY EDM & MFG. INC.     Booth # 420
Service Categories: Machining - CNC Milling & Turning • Machining - Swiss Laser & CNC Swiss • EDM - Wire • EDM - Sinker • Machining - Conventional CNC

We service the Medical Component & Device industry making parts and assemblies complete. We do Swiss Turning, CNC Milling & Turning, Wire & Sinker EDM, High Speed Hard Milling, Micro Hole Burning, Laser Welding & Laser Marking & Etching, Bead blasting and all the finishing. We also service the defense, auto, aerospace and aircraft industry.

Quality Certifications: Lindell
TWIN CITY PLATING     Booth # 336
Service Categories: Metal Finishing - Electroless Nickel • Metal Finishing - Anodizing • Metal Finishing - Hard Coating • Metal Finishing - Passivating • Metal Finishing - Precious Metal Plating

TCP is celebrating 80 years of Metal Finishing. Specializing in Electroless Nickel, there are few jobs we can't handle. Our unrivaled customer service and 2-3 day average turnaround time has awarded us a Top 50 Finishing Shop in America according to Products Finishing magazine. We also perform EN w/boron nitride "Twin Clad XT", type II & III anodizing, passivation, eletropolish, chemical conversion, hard gold plating and chemical polish/bright dip.

Quality Certifications: ISO 9001:2015 • ASTM B-733 • MIL-A-8625 • ASTM 967
WAKEFIELD-VETTE     Booth # 129
Service Categories: Extrusions - Aluminum • Castings - Die • Industrial Equipment • Machining - Production • Heat Sinks

Aluminum Extrusion Mill - Precision Aluminum Extrusions, Thermal Management Solutions, Electronic Packaging Systems and Precision Production Machining and Fabrication.

Quality Certifications: ISO 9001:2008
WESTERN SPRING MFG.     Booth # 334
Service Categories: Springs - Coil • Wire Forming & Fabricating • Springs - Flat • Springs - Wave • Stampings - Short Run

Manufacturer of Precision Coil Springs and Wire Forms. Our products are fabricated by highly skilled technicians operating CNC equipment using a variety of certified materials. All procedures are aligned to ensure delivery of value to our customers and ultimately their customers. Our goal is to be the vendor of choice.

Quality Certifications: ISO 9001:2008
WISCONSIN PLASTIC PRODUCTS     Booth # 310
Service Categories: Extrusions - Plastic • Plastics - Thermoplastic Extrusion • LED's • Roll Forming • Fabricating - Plastic

Located in Southeastern Wisconsin, our core competencies include: intricate, close tolerance profile extrusion, hollow & multi-hollow profiles, large profiles capability, Celuka foamed profiles, multi-material co-extrusion, meta-plast metal embedded plastic extrusions. Continuous fiberglass embedded extrusions, secondary fabrication, complete in-house tool building.

Quality Certifications: ISO 9001:2008
WISCONSIN PRECISION CASTING CORP.     Booth # 130
Service Categories: Castings - Investment • Prototypes - Rapid Casting • Castings - Aluminum • Castings - Stainless Steel • Castings - Steel

A leading manufacturer of Rapid Prototypes & Production Precision Investment Castings. Prototypes delivered in 7-10 working days - no tooling required. Select from 150 different non-ferrous & ferrous alloys for prototypes & production. Engineering support & Secondary CNC machining available. Sizes range up to 20" x 22" x 24". TWO PLANT LOCATIONS - EAST TROY, WI & LAKE GENEVA, WI.

Quality Certifications: ISO
WRICO     Booth # 132
Service Categories: Stampings - Metal • Stampings - Short Run • Welding - Robotic • Fabricating - Sheet Metal • Assemblies - Stamped

Custom short-medium run stampings, fabrications and mechanical assemblies. Presses 20-400 ton - lasers - turrets, EDM's, robotic welding cells. EDI, JIT, Kanban, SPC, CAD/CAM systems. Low cost lifetime tooling - 6 plants strategically located throughout the country.

Quality Certifications: ISO 9001:2008
WSI INDUSTRIES INC.     Booth # 322
Service Categories: Machining - CNC Milling & Turning • Prototypes - Machining • Assemblies - Turnkey • Castings - Aluminum • Forgings

We are a large ISO 9001:2008, AS 9100C, and ITAR Certified Precision Machining, Turning, and assembly facility located in Monticello, MN. We manufacture close tolerance, difficult to machine materials, build-to-print parts, and assemblies for a wide variety of industries.

Quality Certifications: AS 9100C • ISO 9001:2008 • ITAR REGISTERED
ZEISS INDUSTRIAL METROLOGY     Booth # 126
Service Categories: Measurement & Inspection • Measurement - Equipment • Measurement - Software

We are the world's leader in CNC coordinate measuring machines (CMMs) & complete solutions for multidimensional metrology in the metrology lab & production.



ZTECH PRECISION     Booth # 436
Service Categories: Machining - Precision CNC • Machining - CNC Milling & Turning • EDM - Wire • EDM - Sinker • EDM - Small Hole Drilling

We are a team of talented professionals manufacturing high-precision machined components used in the Aerospace, Medical, Defense, Oil & Gas, and other High-Tech industries. ZTECH utilizes 3+2 Axis CNC Milling, multi-axis CNC Turning with live tooling, Wire EDM, Sinker EDM, and EDM Drilling. ZTECH is ISO 9001:2015 certified and ITAR & Cage Code registered.

Quality Certifications: ANSI/ISO/ASQ 9001:2015 • ITAR • CAGE CODE • SAM REGISTERED


© 2017 The Job Shop Company • 16 Waterbury Road, Prospect, CT 06712 • (800) 225-4535