Mid-Atlantic Design-2-Part Show
April 26 & 27, 2017
Greater Philadelphia Expo Center • Oaks, PA

Search by Category


Search by Keywords

  Reset Search  

0 Exhibitors to Meet

Exhibitor List

Listed below are the current exhibitors and service categories of companies in the show.
This page is also an interactive tool for you to use when planning your personal visit.

[ 189 ] companies match your search.
FEATURED EXHIBITORS listed first alphabetically
A.W. MERCER INC.     Booth # 201A
Service Categories: Fabricating - Sheet Metal • Coatings - Electrostatic Powder • Laser Cutting • Welding & Weldments • Assemblies - Mechanical

Specializes in sheet metal fabrications, tubular steel welded assemblies and in-house powder coating. We service the rail, material handling, HVAC and industrial markets with high quality and reasonably priced OEM parts. With lot sizes ranging from 1 to 1,000, A.W. Mercer offers custom solutions to its ever increasing customer base.


Quality Certifications: AWS D1.1 • AWS D1.3 • AWS D1.6 • AWS D17.1
ACE WIRE SPRING & FORM CO. INC.     Booth # 245
Service Categories: Springs - Coil • Wire Forming & Fabricating • Wire Straightening • Assemblies - Mechanical • Hooks

CUSTOM "Spring & Wire Form Specialists" – Incorporating the newest CNC equipment technology to manufacture compression, extension, torsion springs, complex wire forms, and spring assemblies. Consistent quality, lower costs, on-time deliveries, and Design Engineering Assistance. Prototypes to production - Family owned & operated since 1939. Let ACE be your problem solver.


Quality Certifications: ISO 9001:2015 ITAR REGISTERED • MIL-SPEC 45208
ADRON TOOL CORP.     Booth # 107
Service Categories: EDM • EDM - Wire • EDM - Sinker • EDM - Small Hole Drilling • Machining - Production

Wire EDM specialists with over 50 CNC mach., CNC (sinker) std. EDM; largest capacity, 40"x32"x18", workpiece wt. 10,000 lbs., 27-1/2" thick; metal parts rapid prototyping svc. and prod. runs of complex, contoured shapes in tough to mach. or exotic mtl.; CNC production machining, coord. measuring sys., SPC, OGP optical non-contact measuring.


Quality Certifications: ISO 9001:2008 • AS 9100 • NADCAP AS7116
Service Categories: Gaskets, Seals, Washers & O-rings • Rubber Molding • Rubber To Metal Bonding • Silicone / Rubber - Liquid Injection Molding • Prototypes - Rubber

Manufacturer of elastomeric parts. O-Rings; MicrOrings to MacrOrings, AS568 & ISO 3601 (search inventory from our Website). We design & manufacture custom, rubber bonded to plastic, metal & filter materials, and medical rubber parts. Our services include engineering, design assistance & QC testing & reporting, from prototype to Production. Class 7 (10,000) clean room.


Quality Certifications: ISO 9001 • AS 9100
ASH INDUSTRIES     Booth # 143
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Plastics - Rotational Molding • Plastics - Hot Stamping & Screening • Prototypes - Plastic

Engineered for You. In-House MIM, Thermoplastic, and Silicone Injection & Rotational Molding & Tooling as well as cast epoxy components & 7-Axis Swiss Lathe production. Molding includes custom inserts & over-molding, two shot molding. Component assembly, secondary processing & decorating, utilizing the latest in CNC, EDM & Modeling technology.


Quality Certifications: ISO 9001 • ISO 7 CLASS 10K CLEAN ROOM
BARDANE MFG. CO.     Booth # 122
Service Categories: Castings - Die • Castings - Die, Aluminum • Castings - Die, Zinc • Castings - Zinc • Diecasting Design

Aluminum & zinc die casting - ounces to 10+ lbs. Machining, vibratory, & shot blasting. Complete packages - painting, chem-film, silk screening, anodizing, e-coat, assembly. Full tooling design with mold flow analysis. Now ISO 9001:2015 certified.


Quality Certifications: ISO 9001:2015 • MIL-I-45208A • MIL-STD-45662A • MIL-STD-105D
BMI PRECISION     Booth # 342
Service Categories: Machining • EDM • Heat Treating • Tooling

With more than 30 years of manufacturing experience, BMI Precision delivers a wide range of parts and products to customers all over the globe. From engineered-to-order tooling to high-volume quantities of machine parts, you can count on our expertise, advanced processing capabilities and reliable customer service.


Quality Certifications: ISO 9001
Service Categories: Castings - Die • Castings - Die, Zinc • Castings - Zinc • Castings - Die, Aluminum • Castings - Aluminum

Specialists in precision zinc and aluminum die castings from one gram to four pounds. Secondary machining & finishing to your specs. No minimum quantities. Competitive pricing. Casting Zinc components in all Zamak alloys including ZA #8 and EZAC. Casting Aluminum components from ounces to five pounds in 380 and K alloys.


Quality Certifications: ISO 9001 • ITAR CERTIFIED
CENTRAL COATING CO. INC.     Booth # 221
Service Categories: Shielding - EMI/RFI • Plastics - Painting • Metal Finishing - Painting • Coatings - Conformal • Coatings

Since 1970, the East Coast’s largest provider of Engineered Solutions, specializing in EMI/RFI, PCB Conformal Coatings, Low Pressure Encapsulation and Potting. Decorative Painting, Mil-Spec Coatings, Pad Printing, Direct Inkjet Printing, Silk Screening, and Laser Etching. FIP gaskets (conductive/non-conductive). Electro-Mechanical Assembly, Soldering, Supply Chain Management, Kanban, Machining, ISO 9001-2015; UL Recognized & ITAR.


Quality Certifications: ISO 9001:2015, ITAR REGISTERED • RoHS • UL RECOGNIZED • MIL-STD
Service Categories: Plastics - Injection Molding • Assemblies • Packaging • Plastics - Insert Injection Molding • Plastics - Hot Stamping & Screening

Not-for-Profit custom contract manufacturer providing services for parts, sub-assemblies and complete turn-key solutions with less than 1/2% defect rate. Medical and non-medical kitting, cleanroom and white room services. Providing jobs and services for individuals with disabilities for 50 years.


Quality Certifications: FDA REGISTERED • ISO 9001:2015
DB ROBERTS     Booth # 111
Service Categories: Fasteners • Electronic Hardware • Assembly Hardware • Levers, Knobs & Handles • Masking

Since our inception, we have been focused on providing solutions for fastener applications in Sheet Metal Fabrication, Metalworking, and Industrial Electronics. Our "Superior Customer Service" and "Commitment to Excellence" have proven to be a winning formula fueling innovation and rapid growth year after year.


Quality Certifications: ISO 9001:2015 • AS 9120B
DPI INC.     Booth # 445
Service Categories: Machining - Precision CNC • Machining - CNC Milling & Turning • Machining - Stainless Steel • Machining - Multi Axis • Machining - Castings

A full service precision machining and manufacturing company, DPI INC. is committed to excellence in precision machining, quality assurance and customer service; which has earned us a reputation for producing only the highest quality parts. From concept to production to delivery, our goal is to produce superior components, keeping customer satisfaction our first priority.


Quality Certifications: ISO 9001: 2008 CERTIFIED • ISO 9001:2015
Service Categories: Stampings - Short Run • Stampings - Metal • Fabricating - Sheet Metal • Fabricating - Stainless Steel • Laser Cutting

One-Stop Shop for Low Volume metal stampings (100 - 10,000 pieces). Hard tooled die sets start at just $185.00. One-Time tool charge for the Life-Of-The-Part. RFQs quoted complete to print within 48 hours. All metals .010" to .250" thick.


Service Categories: Consulting - Manufacturing • Lean Manufacturing Consulting • Systems Integration • Software For Job Shops & Manufacturers • Information Technology

We have a proven record of accomplishments in projects like Continuous Improvement, Lean Manufacturing, Facility Planning, Business Information System Selection and Integration. Through these efforts our clients have realized millions of dollars in cost reductions and process improvements, while adding and/or retaining jobs. Visit www.ent-sys.com for more information.


EVS METAL     Booth # 233
Service Categories: Fabricating - Sheet Metal • Electronic Enclosures • Assemblies - Electromechanical • Metal Cabinets & Enclosures • Laser Cutting

Precision sheet metal fabricator specializing in electronic enclosures, CNC punching, laser cutting, forming, machining, robotic forming, welding, assembly, in-house automated powder coating, & extensive design services. Proficient in Solidworks. With automated lights out punching & forming capabilities, we are adept at handling prototypes through production.


Quality Certifications: ISO 9001:2008
FONDREMY INC.     Booth # 340
Service Categories: Castings - Aluminum • Castings - Permanent Mold • Castings - Sand • Castings - Brass • Machining - Precision CNC

Permanent Mold & Sand Castings for Aluminum and Bronze Alloys. In-house Machining, Spectrometry, Dimensional Report and Pouring Robot. Quantities from 1 to 100,000 pcs. Capability from 0.5 lbs. to 400 lbs. for AL and 0.5 lbs. to 750 lbs. for BRZ. No lead alloy (Bismuth).


Quality Certifications: ISO 9001:2008
Service Categories: Springs - Coil • Springs - Flat • Wire Forming & Fabricating • Stampings - Fourslide • Stampings - Short Run

Manufacturer of custom springs, wire forms and metal forms. We utilize SPC systems, CNC coilers and experienced craftsmen to assure consistent quality. Design assistance and rush orders are welcome. Wisconsin Grand Manufacturer of the Year. We Quality Certify each process & provide a total Value-added supplier package. 10 piece minimum for custom spring and wire forms.


Quality Certifications: ISO 9001:2008 • ITAR CERTIFIED
G P PRECISION INC.     Booth # 126
Service Categories: Fabricating - Sheet Metal • Electronic Enclosures • Fabricating - Stainless Steel

Full service, sheet metal fabricator providing design, prototype, pilot & production runs. Fiber Optic Laser cutting & CNC punching, forming, welding (TIG, MIG & Spot). Aluminum, Steel, Stainless Steel. Plating & painting, screenprinting & assembly. Quick turn readily available. Get an instant quote: quoting@gpsheetmetal.com - RoHS & ISO 9001:2000 compliant.


GPR COMPANY INC.     Booth # 311
Service Categories: Machining - CNC Milling & Turning • Machining - Multi Axis • Machining - Large Parts • Machining - Conventional CNC • Machining - Weldments

Specializes in precision CNC machining. With a multitude of vertical, horizontal, and multi-axis mill/turn machines, we can handle even the most complex parts. Companies have come to rely on GPR for repeatable quality and a stellar reputation. With diverse size capabilities, we can machine anything from small parts to those as large as 6' x 6' x 16'.


Quality Certifications: ISO 9001:2015 • ITAR
Service Categories: Fasteners • Electronic Hardware • Adhesives • Assemblies - Electrical • Assembly Hardware

Our SAE AS9120 Registered Quality Management System and full service Quality Assurance facilities coupled with many years of technical sales experience and deep product line inventory ensure our commitment to total customer satisfaction. Together these make Hardware Specialty an unbeatable source for all your fastener and electronic component requirements.


Quality Certifications: SAE AS9120 • ISO 9001:2008 • ISO 14001 • MIL STD 45662A
JACKSON SPRING & MFG. CO.     Booth # 237
Service Categories: Springs - Coil • Springs - Flat • Wire Forming & Fabricating

Manufactures precision compression, torsion, extension springs, wire forms, constant force springs and assemblies for a wide variety of applications. Complete design/engineering services.


Quality Certifications: ISO 9001:2008 • ITAR CERTIFIED
Service Categories: Fabricating - Sheet Metal • Machining - Precision CNC • Metal Cabinets & Enclosures • Electronic Enclosures • Prototypes - Fabrication

We are a full service sheet metal fabrication facility and we have proudly served our customers providing reliable, quality service since 1986. We specialize in fabricating electronic enclosures, brackets, chassis, custom panels, tubular frames and electro-mechanical assemblies.


Quality Certifications: ISO 9001:2015
MIDGARD INC.     Booth # 223
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Assemblies • Pad Printing • Welding - Sonic

Leading injection molding facility with an in-house design staff. We can take your part from concept to completion with certified quality assurance. We provide custom tooling and repair along with assembly services.


Quality Certifications: ISO 9001:2008
Service Categories: Laser Marking • Electronic Components • Wire & Cable Harnesses • Assemblies - Cable • Assemblies - Electromechanical

Working from customer specifications, Mohawk Electrical Systems, Inc. combines precision manufacturing capabilities with quality components to produce custom, basic or multi-stage assemblies used in the defense, oil and gas, pyrotechnics, instrumentation and mining industries.


Quality Certifications: ISO 9001:2015
MOLDAMATIC LLC     Booth # 113
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Plastics - Insert Injection Molding • Plastics - Hot Stamping & Screening • Plastics - Heat Sealing & Welding

Plastic - custom injection molding, 60 molding machines up to 600 ton 76 oz. shot size, in-house design CAD/CAM, 20 moldmakers in-house. SPC, QIP & ISO9001-2008 certified, UL registered.


Quality Certifications: ISO 9001:2008 • QIP • SPC • UL REGISTERED
Service Categories: Bearings • Bushings • Machining - Precision CNC • Machining - Conventional CNC • Machining - Production

We are the manufacturer of choice for precision-machined components and a dependable supplier of bar stock and metal products. Our facility is ISO 9001 and AS 9100 certified and ITAR registered. Our value-added services include a variety of inventory management options and rigorous quality standards for 100% quality acceptance and on-time delivery.


Quality Certifications: AS 9100 REV C / ISO 9001:2008 • ITAR REGISTERED
Service Categories: Thread Grinding • Grinding - I.D. & O.D. • Grinding - Centerless • Machining - CNC Milling & Turning • Grinding - Surface

International Grinding, Centerless Grinding, and Myers Precision Grinding are focused on being a reliable ISO 9001 supplier of ID, OD, centerless, surface, and thread grinding solutions for our customers countrywide. Our customers are component manufacturers in the gear, transmission and powers systems in aviation, automotive, medical and energy industries.


Quality Certifications: ISO 9001:2015
Service Categories: Machining • Machining - CNC Milling & Turning • Machining - Large Parts • Fabricating - Steel • Waterjet Cutting - Metal

A machining and fabrication facility located in Mount Bethel, Pennsylvania. Nazareth Machine Works, Inc. has the ability to machine and fabricate various products made from steel and other alloys according to customer specifications. We can machine parts in single piece and high volumes, and in sizes from under an inch to 150 inches in diameter.


NOVATHANE     Booth # 319
Service Categories: Rubber - Polyurethane Molding • Polyurethane - Parts • Rubber Molding • Gaskets, Seals, Washers & O-rings • Polyurethane - Rollers

A specialist in the molding of urethane polymers. Common products include urethane bushings, v-rollers, and bearings, although we can create a custom molding solution to meet your specific needs and requirements. For inquiries please visit the company website at www.novathanedirect.com or call 419-877-3306.


ONEXIA INC.     Booth # 373
Service Categories: Robotics • Motion Control • Engineering & Technical Services • Assemblies - Electromechanical • Assemblies - Mechanical

ONExia is an industrial distributor and custom machine builder based in Exton, PA. Our partnership with our vendors gives us the ability to provide our customers with the best technology available for motion control and precision positioning applications. We also offer a complete line of laser marking and robotic products designed to work in a variety of work environments.


Service Categories: Coatings - Physical Vapor Deposition • Coatings - Conformal • Assemblies - Electrical

An ISO 9001:2008 and ITAR certified manufacturer service provider specializing in the application of Parylene, Acrylic, Polyurethane, Silicone, and Epoxy conformal coatings. PCT conformal coatings find wide-ranging application in medical, electronic, automotive, military & aerospace industries.


Quality Certifications: ISO 9001:2008 / ITAR
PROTO PLASTICS INC.     Booth # 356
Service Categories: Plastics - Injection Molding • Plastics - CNC Machining • Plastics - Insert Injection Molding • Plastics - Elastomeric Overmolding • Tooling - Plastic Injection Molding

A full-service manufacturer of custom plastic injection molded parts & assemblies specializing in technically-demanding, close tolerance parts since 1969. The value-add services provided in our ISO 9001-2008 certified facility are: part design assistance, Tooling design & build, plastic injection molding, pad printing, CNC Machining, & assembly.


Quality Certifications: ISO 9001:2008
Service Categories: Machining - CNC Milling & Turning • Fabricating - Steel • Machining - Multi Axis • Welding & Weldments • Machining - Weldments

We provide experienced, detail oriented solutions for companies manufacturing needs. We specialize in manufacturing of prototypes; short to medium production runs of machined, metal fabricated parts, and assemblies. We strive to partner with our customers through continuous improvement.


Quality Certifications: ISO 9001-2008 • AWS D1.1 WELDING • ITAR • ASME
SMALLEY     Booth # 123
Service Categories: Snap Rings & Retaining Rings • Springs - Coil • Springs - Wave • Springs - Flat • Fasteners

We are the exclusive manufacturer of the industry-leading Spirolox® Retaining Rings, an innovative design that features a no gap, 360° retaining surface without protruding ears to interfere with mating components. We are also the originator of Crest to Crest® Wave Springs which save up to 50% of space compared to conventional coil springs.


Quality Certifications: ISO 9001 & ISO 13485 • IATF 16949 • AS 9100 • ISO 14001
TECH-ETCH INC.     Booth # 141
Service Categories: Chemical Milling • Photochemical Etching & Machining • Shielding - EMI/RFI • Circuits - Flexible • Assemblies - Circuits

Photoetching services featuring specialty materials: tungsten, titanium, polyimide, elgiloy, molybdenum & nitinol. Flexible circuits manufacturer featuring fine line technology, microvias & SMT Assembly. EMI/RFI shielding products manufacturer specializing in beryllium copper spring fingers, conductive fabric gaskets & knitted wire mesh.


Quality Certifications: ISO 9001:2008 • AS 9100 REV C
TRI-COM     Booth # 436
Service Categories: Assemblies - Cable • Wire & Cable Harnesses • Assemblies - Electronic • Packaging

Custom cable and wire harness manufacturer. With over 25 years of experience and expertise we focus on QUALITY and CUSTOMER service, providing our customers with a valuable partner they can count on.


Quality Certifications: UL APPROVED • UL CERTIFIED • IPC/WHMA-A-620 • ISO 9001:2015
Service Categories: 3D Printing • Rapid Prototyping • Rapid Prototyping - Equipment

Ultimaker and MatterHackers share the vision to make 3D printing accessible to all. It is why all of our desktop printers are extremely quiet, fast, accurate, reliable and effortless to use, embraced by professionals and novices alike. Ultimaker is one of the most successful and reliable open source 3D printing companies in the world.


VALCO/VALLEY TOOL & DIE INC.     Booth # 462
Service Categories: Stampings - Metal • Tools, Dies & Fixtures • Fasteners • Screw Machining • EDM

Celebrating 50 years, Valco remains a complete metal parts manufacturing house. Along with our Valco Snap Button line, we also have a complete tool room to manufacture progressive and 4 slide dies, screw machines up to 1 5/8" diameter, CNC and wire EDM capabilities, metal stamping up to 200 tons. Call us today for a quote!


Quality Certifications: ISO 9001:2016
WIGGINS PLASTICS     Booth # 127
Service Categories: Plastics - Injection Molding • Plastics - Compression/Transfer Molding • Plastics - Thermoset Molding • Plastics - Insert Injection Molding • Plastics - Extruded Profiles

32 presses - Single source for all your molding requirements: thermoset injection, compression & transfer molding, thermoplastic injection molding; BMC & SMC molding, prototypes, engineering assistance, hot stamping, pad printing, sonic welding; sub assemblies, short & long runs.


Quality Certifications: ISO 9001:2015
XACT WIRE EDM CORP.     Booth # 131
Service Categories: EDM - Wire • EDM - Small Hole Drilling • EDM • Machining - Production • Laser Marking

We specialize in providing cost effective wire EDM & high speed small hole EDM services to customers in the defense, medical, aerospace, electronics, energy, automation, robotics, MIM, PM & AM, & the metal machining & tooling industries. We have 45 wire EDM machines, 7 high-speed small hole machines & laser part marking. Locations in Waukesha, WI & Cary, IL. ISO 9001:2015


Quality Certifications: ISO 9001:2015
Service Categories: Machining - CNC Milling & Turning • Machining - Microwave • Waterjet Cutting - Metal • EDM • Machining - Castings

A contract machine shop utilizing: CNC Horizontal Mills, CNC Vertical Mills, CNC Lathes, Water Jet, Wire EDM, MIG/TIG Welding, Vibratory Tumbling, CMM, Rockwell Hardness Tester, & In-house RoHs plating. The family run business has been in continuous operation since 1974 supporting customers like General Dynamics, Teledyne, & Lockheed Martin.


Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Electromechanical • Machining - CNC Milling & Turning • Fabricating - Sheet Metal • Assemblies - Cable

Vertically integrated contract manufacturer specializing in precision machining, sheet metal fabrication, PCB assembly and electro-mechanical assembly.


Quality Certifications: ISO 9001:2015 • ISO 13485:2016 MEDICAL • # 97-112 CERT
Service Categories: Wire Forming & Fabricating • Welding & Weldments • Baskets • Fabricating - Stainless Steel • Assemblies - Mechanical

Precision custom fabrication of wire & sheet metal components using steel and stainless steel. Wire forming capabilities .050" to .500" diameter. Design, tool making, CNC forming, bending, machining, presswork, threading, stamping, resistance welding, robotic welding, assembly & specialty packaging. Powder coating & fluid bed finishing. Design assistance for new projects.

Quality Certifications: ISO 9001:2015
Service Categories: Machining - Production • Wheels & Casters

Provides innovative ergonomic and safety solutions for all caster and wheel applications. Service before, during and after the sale since 1957.

ADMIRAL METALS     Booth # 307
Service Categories: Alloys • Extrusions - Aluminum • Fabricating - Aluminum • Grinding • Extrusions - Copper/Alloys

The Northeast's leading distributor of quality metal products: Aluminum, Brass, Beryllium, Bronze, Copper, Stainless and High Temp Alloys. Since 1950 Admiral Metals has built its reputation on providing breadth and depth of available products, competitive pricing, overnight delivery of in-stock items and an unsurpassed level of customer service.

Quality Certifications: ISO 9001:2008
AERO METALS INC.     Booth # 262
Service Categories: Castings - Investment • Castings - Ferrous • Castings - Non-Ferrous • Castings - Stainless Steel • Castings - Steel

High integrity investment casting, net & near net shapes, thin wall, ferrous & non-ferrous components at the lowest total cost. Creative engineering analysis, secondary machining, Just-in-time delivery. Complete in-house tool & die shop, CAD/CAM tooling, and exacting control in achieving dimensional tolerances as specified. 16 Machining centers, drilling, tapping, impact forming, heat treating, sub-assembly of components. Quality craftsmanship & superior customer service.

Quality Certifications: ISO 9001:2015 • NADCAP • SPC
Service Categories: Metal Finishing - Hard Coating • Metal Finishing - Anodizing • Metal Finishing - Electroplating • Metal Finishing - Precious Metal Plating

Anodizing, electroplating, & chemical finishing services including: hardcoat, sulfuric (colors & clear) & chromic anodizing; gold, silver, electroless nickel, rhodium, nickel, tin, copper & zinc plating; electropolishing of stainless steel. Mil Specs. Special Capabilties: Type II Anodizing up to 20ft. and Type III Anodizing up to 16ft. Visit www.alexandriametalfinishers.com for more.

Service Categories: Machining - CNC Milling & Turning • CAD/CAM Software • Machining - Conventional CNC

Precision Machining, fabrication and custom welding services. Capabilities include but not limited to complex muti-part custom engineered fabrications and assemblies.

Quality Certifications: ISO 9001:2008
ALRO STEEL & PLASTICS     Booth # 450
Service Categories: Aluminum - Materials • Alloys • Cold Drawn Steel Profiles - Cold Rolled Steel • Stainless Steel - Materials • Plastics - Sheet, Rod & Tube

We have grown to over 60 locations in 12 states. Alro distributes metals, industrial supplies and plastics, offering cut-to-size metals and plastics with next day delivery to over 25,000 customers in North America. Alro sells a broad inventory of products under the following companies: Alro Steel, Alro Metals, Alro Metals Outlet, Alro Industrial Supply, and Alro Plastics.

Quality Certifications: ISO 9001:2008
Service Categories: Stampings - Deep Drawn Shells • Hydroforming • Assemblies - Mechanical • Brazing - Aluminum Dip

Deep drawn & Hydroformed Enclosures; plus Aluminum Dip Brazing. SECONDARY OPERATIONS: CNC Machining, Anodizing, Iriditing, Painting (Powder Coat & Wet), Piercing/Forming, Welding, Light Assembly and Heat Treating. MATERIALS: Aluminum, Stainless, Brass, Copper, Hastelloy, Nickel, Steel & Specialty Metals. MARKETS SERVED - All.

Quality Certifications: MIL-I-45208A • ITAR REGISTERED
Service Categories: Castings - Sand • Castings - Die, Aluminum • Castings - Permanent Mold • Patternmaking • Tooling - Casting

A full service aluminum casting house offering sand, die, and permanent -mold aluminum castings. All patterns and molds are built in-house.

Quality Certifications: AMS-2771 • ISO 9001:2008
Service Categories: Gaskets, Seals, Washers & O-rings • Die-Cutting - Felt, Cork & Rubber • Fabricating - Foil, Films & Foams • Die-Cutting • Waterjet Cutting - Non-Metal

Employee Owned, Custom Fabricator of Flexible materials: foam, rubber, sponge, thin gauge plastics, EMI/RFI, and pressure sensitive adhesives. Services: rotary die cutting/flatbed die cutting, kiss cutting, DIGITAL CUTTING, laser cutting, water jet cutting, slit to width, laminating films, fabric & PSA. Rogers Corporation Preferred Converter. 3M Select Converter.

Quality Certifications: ISO 9001:2015 • SPC
Service Categories: Electronics - New Product Development • Assemblies - Electronic • Wire & Cable Harnesses • Assemblies - Printed Circuit Boards • Embedded Devices

Design and manufacture industrial electronic control systems including printed circuit board assemblies and wire harnesses.

Quality Certifications: ISO 9001:2015
AMUNEAL MFG. CORP.     Booth # 326
Service Categories: Heat Treating • Shielding - EMI/RFI • Electronic Enclosures • Fabricating - Sheet Metal • Prototypes - Rapid Sheet Metal

Serving highly technical markets, working with leaders in aerospace, electronics, cryogenics, healthcare, and research to develop cost-effective shielding strategies and products that out perform the most demanding requirements. Hydrogen Atmosphere Heat Treating, Oxiding, Magnetic Material Annealing.

Quality Certifications: ISO 9001:2008 • MIL-STD-45662A • MIL-45208A
Service Categories: Nameplates, Dials & Panels • Labels, Tapes & Decals

Manufacturer of custom labels, nameplates, decals, panels, dials, tags, spacers and insulators. Long and short runs. Immediate delivery. Providing dependable, prompt, courteous service since 1963.

API TECHNOLOGIES     Booth # 238
Service Categories: Assemblies - Printed Circuit Boards • Prototypes - Electronic • Assemblies - Electromechanical • Assemblies - Electronic • Surface Mount Technology - Assembly

PCBA prototyping, DFM/DFA/DFT analysis, SMT assembly including 0201 & BGA, through-hole/mixed technologies, new product introduction, electromechanical assembly, box build, functional/in-circuit/flying probe test & rework services. Turnkey/consigned material management, AOI, wave solder, X-Ray, cleanliness testing. RoHS Compliant, ITAR Registered & J-STD-001 Certified.

Quality Certifications: AS 9100:2009 • ISO 13485 / ISO 9001:2008 • UL REGISTERED • IPC CLASS 2 / IPC CLASS 3
Service Categories: Castings - Permanent Mold • Castings - Aluminum • Castings - Zinc

Aluminum & zinc castings, engineering assistance, in-house tooling, machining & assembly. Castings from a few ounces to 80 lbs. Quantities from 500 to 150,000.

Quality Certifications: ISO 9001:2008
BELMET PRODUCTS INC.     Booth # 473
Service Categories: Stampings - Deep Drawn Shells • Stampings - Metal • Tooling • Tools, Dies & Fixtures

A reliable and trusted source for stamped metal and deep drawn parts for over 80 years. Delivering a quality product on time has been our formula for success since 1919. Belmet Products serves the needs of Original Equipment Manufacturers in a broad range of industrial and consumer products including aerospace, beverage, display bases, defense & automotive.

Quality Certifications: ISO 9001:2008
Service Categories: Assemblies - Electronic • Assemblies - Mechanical • Assemblies - Printed Circuit Boards • Assemblies - Turnkey

A leading electronic manufacturer based in New Jersey. We provide turnkey/box-build manufacturing services, including electronic, mechanical, and printed circuit board assemblies with components, as well as fulfill quality control procedures and testing to insure finished goods meet our customers’ satisfaction.

Quality Certifications: ISO 9001:2015 • UL CERTIFIED • ETL • MIL-STD-105D
Service Categories: Aluminum - Materials • Extrusions - Aluminum • Fabricating - Aluminum Extrusions • Machining - Aluminum • Metal Finishing - Anodizing

We are a leader in aluminum extruding, fabricating and anodizing. We are recognized for providing superior quality fabricated aluminum extrusions along with exceptional customer service. Our highly trained employees are committed to provide value to customers for their custom aluminum extrusions, specialty fabrication or direct job-shop anodizing requirements.

Quality Certifications: ISO 9001 • ISO 14001 • ISO/TS 16949
Service Categories: Calibration & Metrology • Inspection Services • Measurement & Inspection • Measurement - Equipment • Quality Control

A provider of metrology solutions to the industry for over forty years. Our calibration division provides accredited, NIST-traceable field calibration services of dimensional instruments.

Quality Certifications: ISO/IEC 17025:2005
BREWSTER WASHERS     Booth # 361
Service Categories: Stampings - Shims • Gaskets, Seals, Washers & O-rings • EDM - Wire • Prototypes - Stamping • Stampings - Micro-Miniature

We are a fourth generation custom precision parts manufacturer of washers, shims, discs and other odd shaped flat parts. Our company is celebrating its 100th Anniversary in 2019! All parts are manufactured in our Fairfield, NJ plant with American or DFARs compliant materials. We are ISO 9001 certified and working towards our AS9100 certification.

Quality Certifications: ISO 9001 • DOD REGISTERED • CAGE CODE: 08555
Service Categories: Screw Machining - Multi Spindle • Machining - Precision CNC • Bushings • Connectors & Couplings • Hoses, Clamps & Fittings

An industry leader in the production of simple to complex machine turned precision parts in high to low volumes. Committed to consistently delivering quality products, delivered on time, and supported through outstanding customer service. Our "Value Add" technological advances ensure our customer's high quality products are delivered at a consistently competitive cost.

Quality Certifications: TS 16949 • ITAR REGISTERED
Service Categories: Switches - Membrane • Labels, Tapes & Decals • Screen Printing • Nameplates, Dials & Panels • Prototypes - Electronic

For over 25 years Butler Technologies has been providing screen/digitally printed Membrane Switches, Overlays & Labels. Additional products and processes include printed electronic components, dials & gauges, rubber keypads & laser cutting service. Please ask about our Rapid Prototype Program.

Quality Certifications: ISO 9001 • UL APPROVED • ITAR • CSA APPROVED
Service Categories: Plastics - Thermoforming/Vacuum Forming • Plastics - Pressure Forming • Extrusions - Plastic • Plastics - Extruded Profiles • Plastics - Thermoplastic Extrusion

C&K Plastics and Valley Extrusions are sister plastic companies. Since 1963 C&K has specialized in cut sheet vacuum, pressure and twin sheet forming, also providing CNC machining and contract manufacturing. Since 2001 Valley has specialized in custom plastic extrusions with co-extrusions & tri-extrusions, large parts, complex hollows & tubing capabilities produced in most thermoplastics. Our three facilities have a combined 450,000 sq.ft. giving us the capacity to meet even the largest requirements. Valley Extrusions - PA, C&K - NJ, and C&K Georgia - GA.

Quality Certifications: ISO 9001:2008
CAD BLU     Booth # 322
Service Categories: 3D Printing • Rapid Prototyping • CAD/CAM Software • Materials - Plastic • Prototypes - Plastic

For over 20 years, CAD BLU has been transforming businesses through manufacturing innovation. We provide an extensive selection of 3D printer systems, materials, technologies, and vendors - offering you the right solution for virtually any printing need you may have. We don't just sell machines. We provide solutions.

CAMCO MFG. INC.     Booth # 323
Service Categories: Machining • Assemblies • Gears • Grinding • Machining - Castings

A full service machine shop specializing in manufacturing of precision machined components and electromechanical assemblies. We offer our customers the most accurate lead times, exceptional quality standards and competitive pricing.

Quality Certifications: ISO 9001:2008 • ISO 17025 • ITAR • LOCKHEED MARTIN
Service Categories: Fabricating - Sheet Metal • Fabricating - Heavy Steel & Plate • Machining • Special Machinery - Design, Build & Rebuild • Engineering & Technical Services

Custom Machinery, OEM equipment. Metal Fabrication; Sheet Metal - Heavy Gauge (Carbon Steel, all grades of Stainless, exotic alloys). ASME Code Welding, Build-to-Print or Design & Build. Electrical Systems and Control Panels. Precision Machining, Pressure Vessels & Piping. Field Installation, Reverse Engineering, Contract Engineering, Design Analysis, Drawing Packages & Project Management.

Quality Certifications: ASME U / PP / R STAMPS • AWS • NACE • ITAR
CAPLUGS      Booth # 209
Service Categories: Plastics - Injection Molding • Plastics - Extruded Profiles • Die-Cutting • Tooling

A worldwide leader in product protection for over 70 years. We specialize in six different molding processes allowing us to offer a variety of design and material options. Our catalog highlights 15,000+ parts in stock and ready to ship. If a part doesn't meet your requirements, our team of engineers will work with you to design exactly what is needed.

Quality Certifications: ISO 9001 • IATF 16949 • ISO 13485 • ISO 14001
Service Categories: Extrusions - Aluminum • Metal Finishing - Anodizing • Fabricating - Aluminum Extrusions • Powder Coating

Custom aluminum extrusions; brite dip, color & architectural hard coat anodizing & powder coating, complete fabricating capabilities.

CARTER MFG. CO. INC.     Booth # 248
Service Categories: Stampings - Metal • Stampings - Progressive Die • Rubber To Metal Bonding

We manufacture a diverse range of stampings from all kinds of metals to the highest quality using high speed Bruderer presses. 170 ton Stamtec's give the capability for large parts. We service all industries including Medical, Automotive, Telecommunications, Bearings and Seals. Secondary operations include Tapping, Deburring, Degreasing and Assembly.

Quality Certifications: ISO 9001:2008 • NSF • ITAR CERTIFIED
CENTURY-TYWOOD MFG.     Booth # 349
Service Categories: Fabricating - Sheet Metal • Fabricating - Stainless Steel • Roll Forming • Stampings - Ferrous & Non Ferrous • Assemblies - Electromechanical

Sheet Metal Fabrication, Metal Stampings, Specialty Wire Mesh & Screen Punching, Roll Forming, Welding (TIG, MIG, SPOT), Soldering, Wire EDM, and Value added electro-mechanical assembly in a clean room environment.

Quality Certifications: ISO 9001:2015 • ITAR
Service Categories: Machining - Exotic Materials • Machining - Microwave • Machining - Precision CNC • Screw Machining - Swiss/CNC Swiss • Prototypes - Machining

CNC Swiss Screw Machining & Assembly, Machining up to 1-1/4" diameter, custom precision parts for the Aerospace, Electronic, Military, Firearms, Medical & Commercial Industries.

Quality Certifications: ISO 9001:2008 • ITAR
CIMQUEST INC.     Booth # 213
Service Categories: 3D Printing • Rapid Prototyping - Equipment • Reverse Engineering • Inspection Services • CAD/CAM Software

We are a leading resource for 3D printing, Reverse Engineering, and CNC programming based in Branchburg, NJ. Serving the East Coast since 1990, we help equip companies (small and large) with tools for product development, manufacturing, and final part inspection. With a diverse staff of machinists, engineers, and technicians, Cimquest understands the latest technology and will direct companies to the best solution even if it's not our own. 3D Printing hardware and services include HP Multi Jet Fusion and Desktop Metal solutions.

Service Categories: Metal Finishing - Painting • Plastics - Painting • Shielding - EMI/RFI • Powder Coating • Pad Printing

Contract production painting (Metal/Plastics) - Powder, Liquid, CARC, Teflon, and EMI/RFI Shielding. Chemical pre-treatment including RoHS Chromate, Blasting, Pad Printing, Silk-Screening, Mask Making, High-Bake capability and Blister Packaging.

Quality Certifications: ISO 9001:2015 • CONTROL PLANS • FEMA • FLOW CHARTS - SPC
CW THOMAS      Booth # 225
Service Categories: Plastics - Thermoforming/Vacuum Forming • Plastics - Pressure Forming • Plastics - Low Volume • Prototypes - Plastic • Plastic Cabinets & Enclosures

For over 70 Years CW Thomas has been producing highly engineered plastic parts and assemblies, delivered when needed to our customers, and at fair and reasonable prices. We have an established reputation as an industry leader in expanding the viability of the thermoforming processes of Vacuum and Pressure forming.

Quality Certifications: ISO 9001:2008 • AS 9100C
DA/PRO RUBBER INC.     Booth # 124
Service Categories: Rubber Molding • Plastics - Injection Molding • Silicone / Rubber - Liquid Injection Molding • Rubber To Metal Bonding • Rubber - Compression Molding

5 facilities for compression/injection molding - high-quality custom rubber, TPE, & plastic components molded to precision tolerances such as diaphragms, seals, connectors, molded shapes, rubber to metal parts for medical device, electronic & aerospace industries. Class 10,000 cleanroom - chemists & engineers assist in optimal moldability. sales@daprorubber.com

Quality Certifications: ISO 9001
Service Categories: Screw Machining - Swiss/CNC Swiss • Screw Machining - Multi Spindle • Machining - Precision CNC • Machining - CNC Milling & Turning • Assemblies

We deliver custom high and low complexity parts for critical components and sub-assemblies for OEMs in the northeast and beyond. When precision is non-negotiable, our CNC Swiss and CNC Multi Axis machines provide accuracy and consistency for both low and high volume runs.

Quality Certifications: ISO 9001:2008
Service Categories: Inspection Services • Quality Systems • Testing - Mechanical Standards • Testing - Environmental

We are a thrid party certification and verification company that validates manufacturing standards for U.S. based clients. These standards include ISO 9001, 14001, 50001, 13485, AS 9100, IAT 16949, OHSAS 18001 and many others. DEKRA also provides Assessment Services.

Quality Certifications: ISO 9001:2015, AS 9100 • IATF 16949 • ISO 14001:2015 • ISO 13485, ISO 50001
Service Categories: Screen Printing • Switches - Membrane • Labels, Tapes & Decals • Nameplates, Dials & Panels • Die-Cutting

A leading manufacturer of graphic overlays, membrane switches, labels and functional die cut products since 1971. We take pride in being your one-call solution provider.

Quality Certifications: ISO 9001:2008 • CSA & UL APPROVED • RoHS • ITAR
DESIGNDESIGN INC.     Booth # 314
Service Categories: Engineering & Technical Services • Industrial Design Services • CAD Design Services • Mechanical & Electronic Design • Reverse Engineering

We provide Product Design & Development services to clients in the Consumer, Industrial, Medical & Defense markets. More specifically: Industrial Design (Product Aesthetics, Human Factors, Ergonomics) & Mechanical Engineering (Design for Manufacture & Assembly, Interactive Mechanism Development) support to New Product Development & Mature Product Refresh/Cost-Reduction.

DESIGNLYNX LLC     Booth # 441
Service Categories: CAD Design Services • Engineering & Technical Services • Prototypes - Electromechanical • Reverse Engineering • 3D Printing

A product development firm specializing in creating meaningful products for a broad range of clients and consumers. Designlynx LLC works on projects large and small (and everything in between) and have experience in a variety of industries. From Industrial Design to Design-For-Manufacture and Engineering - we believe in listening to our clients and consumers.

Service Categories: Machining - Precision CNC • Prototypes - Machining • Fabricating - Sheet Metal • Inspection Services

Precision machining in the fields of medical, aerospace, automotive, tool & die repair, electronics & plastics using the most advanced equipment and a team of highly professional machinists.

Quality Certifications: ISO 9001:2008
DRT POWER SYSTEMS     Booth # 260
Service Categories: Machining - CNC Milling & Turning • Fabricating - Sheet Metal • Assemblies - Mechanical • Brazing - Aluminum Dip • Machining - Aluminum

Manufacturer of complex machined components & assemblies. Broad range of capabilities including CNC milling, CNC turning, sheet metal fabrication & dip brazed assemblies, Laser Cutting, and Machining of aluminum castings. AS9100C / ISO 9001:2008

Quality Certifications: AS 9100C • ISO 9001:2008
EB INDUSTRIES LLC     Booth # 327
Service Categories: Electron Beam Welding • Welding - Laser • Welding & Weldments • Laser Cutting • Testing - Non-Destructive

Full service provider of Electron Beam Welding, 5 axis Laser Welding, 2D&3D Laser Cutting and Laser Hermetic Sealing Services. We specialize in integrating with our customers' supply chains, exceeding requirements for cost, delivery, and quality. Experience welding aluminum, copper, stainless, titanium, and other exotic alloys, including dissimilar combinations.

Quality Certifications: ISO 9001:2008 • NADCAP CERTIFIED FOR WELDING • AWS D17.1 • ITAR REGISTERED
ECK PLASTIC ARTS     Booth # 374
Service Categories: Plastics - Injection Molding • Plastics - Thermoforming/Vacuum Forming • 3D Printing • Plastics - CNC Machining • Rapid Prototyping

We are a supplier of plastic engineered components to OEM customer specifications. Processes in house include - Fabrication, Machinings, 3D Printing,Protoypes, Injection Molding, Assembly and Vacuum Forming.

Service Categories: Fabricating - Sheet Metal • Assemblies - Turnkey • Electronic Enclosures • Machining - Precision CNC • Plastics - Injection Molding

Custom sheet metal fabrication & machining. Chassis, card cages, front panels, cabinets & enclosures. Plating (RoHS), painting, silk-screening & value added assembly in-house. Prototypes to production with short lead times & competitive pricing.

Quality Certifications: ISO 9002 • MIL-STD-105 • MIL-I-45208
ELMIRA STAMPING & MFG. CORP.     Booth # 253
Service Categories: Stampings - High Volume • Stampings - Deep Drawn Shells • Stampings - Progressive Die • Machining - CNC Milling & Turning • Welding & Weldments

We specialize in deep drawn & progressive die metal stampings, along with CNC Machining, Tube Bending & Welded Assemblies. We supply turn-key finished metal parts to OEM's.

Quality Certifications: ISO 9001:2008
Service Categories: Machining - CNC Milling & Turning • Welding & Weldments • Fabricating - Steel • Machining - Weldments • Assemblies - Mechanical

Serving industry for over 80 years. Quality and customer satisfaction is our main goal. Elsner is a contract manufacturer along with custom and stock machine builds. We have our own product line of paper converting machinery. We sell around the world and have machines in over 60 countries. We are located in one facility in south central PA.

Service Categories: Plastics - Thermoforming/Vacuum Forming • Plastics - Pressure Forming • Fabricating - Plastic

For 60 years Engineered Plastic Products has been custom thermoforming and fabricating all thermoplastic materials that include those with ESD and high temperature properties. Providing our customers services from prototype engineering to production assembly in low to mid-volume quantities.

Service Categories: Castings - Investment • Castings - Steel • Castings - Non-Ferrous

Ferrous & non-ferrous investment castings. In-house capabilities include: toolroom, complete N.D.T. and heat treating. Email us your RFQ at info@epcast.com

Quality Certifications: MIL-45208 • AS 9100 • ISO 9001
ENSER CORP.     Booth # 222
Service Categories: Engineering & Technical Services • Special Machinery - Design, Build & Rebuild • Mechanical & Electronic Design • CAD Design Services • Finite Element Analysis - FEA

Celebrating 70 years of supporting the engineering community, our Engineering and Design of product, manufacturing, tooling and testing, and supporting your process engineering, we can deliver superior cutting-edge solutions. Our reputation is built on the quality of service and firmly believe long-term customer satisfaction is the cornerstone of our success.

EPILOG LASER     Booth # 257
Service Categories: Lasers • Laser Cutting • Laser Engraving • Laser Marking • Bar Coding

An industry leader in design of laser engraving, cutting & marking systems, manufacturers of the Epilog Zing, Mini, Helix, Fusion Pro, FiberMark, and G2 Galvo series of laser systems.

Quality Certifications: ANSI STANDARDS • IEC • CE • CFR 21
ETEMCO     Booth # 362
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Electronic • Assemblies - Electromechanical • Coatings - Conformal • Prototypes - Electronic

An ISO-9001:2015 Certified Contract Electronic Manufacturer specializing in electronic and electro-mechanical assembly, sub-assembly, system assembly, and conformal coating. We excel at complex RoHS or lead based surface mount, through hole, and mixed technology PCB assemblies. Our customer-focused culture is evident in our superior quality and customer service.

Quality Certifications: ISO 9001:2015 • IPC A-610D CLASS 2&3 • J-STD-001 • UL LISTED
EVANS     Booth # 110
Service Categories: Stampings - Deep Drawn Shells • Eyelets & Drawn Shells • Stampings - Metal

Conventional multi-station transfer presses. Custom designed progressive type presses. Thin-walled drawn metal shells, tubular parts and precision metal stampings.

Quality Certifications: ISO 9001:2015
Service Categories: Plastics - Reaction Injection Molding • Plastics - Structural Foam • Plastics - Thermoset Molding • Molds & Moldmaking - Metal • Electronic Encapsulations

Aluminum Molds CAD/CAM, large part molding through RIM & Thermoplastic Structural Foam, Spray Painting, Shielding, Screening, Assembly. KANBAN - ERP Software. QC Dept. - CMM.

Quality Certifications: ISO 9001:2008
FAB FORM     Booth # 443
Service Categories: Stampings - Short Run • Fabricating - Steel • Machining - CNC Milling & Turning • Fabricating - Sheet Metal • Powder Coating

A turn-key Metal Stamping, Fabricating and Machining company founded in 1978, specializing in Laser Cutting, CNC Punching, Metal Stamping, CNC Bending, Welding, Vertical and Horizontal Machining, Forming and Powder Coating. We offer complete manufacturing solutions from design and development to full production.

Quality Certifications: ISO 9001:2008
Service Categories: Machining - CNC Milling & Turning • Screw Machining - Swiss/CNC Swiss • Screw Machining - Multi Spindle • Rapid Prototyping • Assemblies

Serving OEM companies for over 74 years, supplying them with carefully-engineered, precision machined parts and assemblies that are delivered on-time at very attractive prices. Our employees really excel at making your parts right the first time and they can offer valuable advice for further cost reductions!

Quality Certifications: ISO 9001:2015
FALK PRECISION INC.     Booth # 339
Service Categories: Machining • Machining - CNC Milling & Turning • Machining - Precision CNC • Plastics - CNC Machining • Assemblies - Mechanical

We are a contract manufacturer who specializes in tight tolerance and precision parts. Multi-axis machining, horizontal, vertical, palletized, 3-D machining, turning, shearing, grinding/finishing, tooling, assembly, multi-shift operations, CNC bending, TIG/MIG welding, sheet metal fabrication, and quality inspection – DCC CMM.

Quality Certifications: ITAR • AWS D1.1 • AWS D1.2 • AWS D17.1 WELDING
Service Categories: Deburring • Metal Finishing - Tumble & Vibratory Polishing • Surface Finishing • Surface Treatment • Shot Peening

Surface preparation and mass finishing job shop facility for metal, rubber & plastic. Small or large lots, long or short runs. High end technologies used. Surfaces below 1 Ra achievable. Vibratory tumbling & shot peening, dry coatings. Large OEM supplier of equipment and consumables as well.

Service Categories: Castings - Graphite Mold • Castings - Aluminum • Castings - Zinc • Castings - Die, Aluminum • Castings - Die, Zinc

The leader in Graphite Permanent Mold Technology, rapid production tooling, CNC machining, & economical, high precision mfg. of zinc & aluminum castings. We offer high quality castings in low and medium production volumes and a lifetime warranty on every production mold we make. Graphite molds are a fraction of the cost of die cast tools.

Quality Certifications: CONTROLLED GOODS • ISO 9001:2015 • ISO 14001:2004 • BSOHSAS: 18001:2007
FORMED PLASTICS INC.     Booth # 252
Service Categories: Plastics - Rotational Molding • Plastics - Thermoforming/Vacuum Forming • Fabricating - Plastic • Machining • Assemblies

An award winning rotational molder, thermoformer and fabricator of custom plastic parts. We specialize in small to medium sized production runs with low cost tooling. We are a third generation family run business, with over 65 years of experience, including in-house engineering, tool-making, painting and assembly.

Quality Certifications: ISO 9001:2008 • AS9100-C
Service Categories: Gaskets, Seals, Washers & O-rings • Rubber Molding • Prototypes - Rubber • Extrusions - Rubber

For over 60 years, we have consistently provided superior technical solutions specializing in O-rings, seals, custom PTFE and molded shapes with the lowest total cost of ownership. Creating competitive advantages for our customers in their products or markets is what makes Gallagher "The Seal Specialist". 2nd location: 21 Deer Park Dr., East Longmeadow, MA, Ph: 800-356-0061

Quality Certifications: ISO 9001:2008 • ISO 14001-2004
GAM PRECISION     Booth # 375
Service Categories: Machining - CNC Milling & Turning • Machining - Precision CNC • CAD Design Services • Special Machinery - Design, Build & Rebuild • Machining - Production

Specializes in CUSTOM Precision Screw Machine Products; CNC Swiss, Turning & Milling. Our team consists of Skilled Engineers, CNC Programmers, and Machinists all committed to providing products to the highest standards. ISO Compliant, we operate out of a very clean, modern, 25,000 square foot facility equipped with the latest multi-axis 3D machining equipment.

Service Categories: Springs - Coil • Wire Forming & Fabricating • Springs - Flat • Assemblies - Mechanical

We are a leading manufacturer of precision springs & wire forms in small & large quantities from a wide range of materials. We have one of the largest wire ranges in the spring industry. In-house design engineering painting, bar coding, shot peening & assembly are all available. We routinely handle rush deliveries.

Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Turnkey • Assemblies - Electrical • Testing - Printed Circuit Boards • Surface Mount Technology - Assembly

A full-service electronics contract manufacturer specializing in RoHS compliant printed circuit board assembly, box builds and custom functional test.

Quality Certifications: ISO 9001:2008 • IPC-A-610 / J-STD-001 • UL APPROVED • ETL
GOPROTO INC.     Booth # 376
Service Categories: 3D Printing • Machining • Tooling - Plastic Injection Molding • Tooling - Casting • Prototypes - Models

Delivering turnkey plastic and metal part manufacturing solutions including industrial design model making, rapid prototyping, additive manufacturing, cast urethane, CNC machining, rapid sheet metal, rapid injection tooling, production parts (injection molding, stamping, die-cast, sheet metal), and part finishing to complete your product.

Quality Certifications: ISO 9001
Service Categories: Plastics - Extruded Profiles • Extrusions - Plastic

A North American custom profile extrusion company and a recognized international leader in thermoplastics profile design, engineering, processing and value-added manufacturing. We have over 40 years of experience helping our customers discover unique and innovative possibilities in plastic extrusion.

Quality Certifications: ISO 9001:2008
Service Categories: Metal Finishing - Zinc Plating • Metal Finishing - Electroplating • Metal Finishing - Passivating • Metal Finishing - Plating

Primarily a zinc and zinc nickel electroplater located in Erie, PA., Great Lakes Metal Finishing, Inc.operates 8 automated plating lines, consisting of both rack and barrel plating. Some of our other services include: passivation, pickle and oil, aluminum conversion, and sandblasting.

Quality Certifications: ISO 9001:2008 • SAM REGISTERED • ASTM-B-633 • ISO 9001:2008
GREENE RUBBER CO. INC.     Booth # 115
Service Categories: Rubber Fabrication • Rubber Molding • Rubber - Transfer Molding • Silicone / Rubber - Liquid Injection Molding

Custom rubber gaskets & seals. Custom rubber molding, LSR, vibration isolation, rubber-to-metal bonding, Chomerics EMI & Thermal materials, Rogers Poron Urethane Foams, 3M Adhesives, Parker O-Rings, St. Gobain tubing and Panasonic PGS.

Quality Certifications: ISO 9001:2015 • AS9100D
Service Categories: Machining - Aluminum • Machining - Precision CNC • Machining - Microwave • Machining - Production • Machining - Castings

We are a second generation company serving the medical, communication and electronic industries in the tri-state area since 1963. We specialize in C.N.C. milling, short runs to production orders.

HARVEY VOGEL MFG. CO.     Booth # 333
Service Categories: Stampings - Metal • Fabricating - Sheet Metal • Assemblies • Prototypes - Rapid Sheet Metal • Welding & Weldments

Complete Metal Service Contractor. Metal Stamping, Fabrication, Machining, In-House Powder Coating & more. Metal Stamping experts for quality fabrication services since 1942. We excel at producing the most difficult stampings and metal fabrications for a wide variety of industries. Our niche is short to medium run quantities of 1,000 pieces to 50,000 pieces annually.

Quality Certifications: ISO 9001:2015 • ISO 14001
HOFFMAN MFG. INC.     Booth # 220
Service Categories: Fabricating - Sheet Metal • Welding & Weldments • Machining - Conventional CNC • Welding - Robotic • Laser Cutting

Precision sheet metal fabrication shop. CNC punching & forming. Full welding capabilities include robotic welding, spot welding, Mig & Tig welding & laser cutting. Powder coating services available.

HOLCO INC.     Booth # 446
Service Categories: Calibration & Metrology • Measurement - Equipment • Measurement - Software • Measurement & Inspection • Metrology - Equipment & Services

We provide measuring systems from Quality Vision International (comparators, video & multisensor systems, and point cloud systems by OGP, RAM, CCP, VIEW & ShapeGrabber). Also, Scan Fit Measure by EngView, Romer Arms, Renishaw, and Erowa for part holding & automation for machine tools. Our sister co., HMS, does A2LA/ISO certified calibrations for measuring systems.

Quality Certifications: A2LA ACCREDITED • ANSI-Z-540-1 • ISO/IEC 17025:2005
HOWARD J. MOORE CO. INC.     Booth # 303
Service Categories: Plastics - CNC Machining • Die-Cutting - Felt, Cork & Rubber • Insulators • Rubber Stampings • Laser Cutting

Plastic Fabricator: Die Cut, CNC machined, stamped, laser cut and 3D printed parts. We specialize in custom non-metallic materials. Materials we work with inlcude Phenolics (X,XX, LE, CE, G7, G9, G10, G11 GPO, FR4), Lexan, Acrylic, Delrin, PTFE teflon, ABS, Nylon, Nomex, Formex, Kapton, Mylar, Thermal Transfer materials, EMI shielding materials, all rubbers and more.

Quality Certifications: ISO 9001:2008 • MIL-I-45208A
HOWELL PLASTICS     Booth # 316
Service Categories: Plastics - Thermoforming/Vacuum Forming • Packaging • Material Handling • Prototypes - Fabrication • Plastics - CNC Machining

Specializing in design, tooling & manufacturing of both thin & heavy gage products such as material handling trays, custom enclosures, OEM components, blisters, clamshells & medical device packaging. We use a wide variety of materials including GP-ABS, HDPE, PETG, HIPS & PVC. Thickness ranging from 0.010" - 0.500".

HOYT CORPORATION     Booth # 456
Service Categories: Extrusions - Copper/Alloys • EDM • Machining - CNC Milling & Turning • Screw Machining - Swiss/CNC Swiss • Assemblies - Electromechanical

For over 50 years, Hoyt has been a prime manufacturing source of quality electrical contacts, and contact assemblies for both the OEM market as well as the replacement aftermarket; supplying, rebuilding, and servicing customers around the world. Hoyt manufactures a vast array of both standard and custom designed electrical parts.

Service Categories: Extrusions - Plastic • Plastics - Extruded Profiles • Plastics - Thermoset Extrusion

We are a custom plastic profile extrusion company with over 42 years servicing OEMs and many Fortune 500 companies. We offer an impressive array of engineered polymers, producing profiles from a 1/16" up to a 5" envelope within a wide range of geometries. Secondary and inline printing capabilities. In-house tooling and design capabilities offer responsive lead times.

HTF     Booth # 261
Service Categories: Fasteners • Electronic Hardware • Threaded Parts • Grommets • Assembly Hardware

Authorized stocking distributor for 60 leading fastener & component lines. Products include PEM, Southco, circuit board hardware & accessories, threaded inserts for plastics, cable components, adhesives & tapes, commercial & military hardware, installation tools, grommets, grommet edging, gaskets, extrusions, seals trim, fiber management, cable sleeving and wraps.

Quality Certifications: ISO 9001:2000 • MIL-I-45208A
Service Categories: Tube Bending & Fabricating • Laser Cutting • Cutting - Tube & Pipe • Welding & Weldments • Powder Coating

We are experts in tube bending & fabrication, providing innovative quality products & services. From robotic welding, to powder coat painting to LASER TUBE CUTTING to 12" diameter, our customers use our many services to get assemblies done well & done right. Ask us about our 5 axis laser. For a quote call Tim @ 919-258-3070.

Quality Certifications: ASTM - SAE • METRIC - JIS • CE AWS • ISO 9001-2000
Service Categories: Assemblies - Printed Circuit Boards • Electronics - New Product Development • Surface Mount Technology - Assembly • Engineering & Technical Services • Prototypes - Electronic

US-based contract manufacturing, electronics engineering, and product development for medical, industrial, military, and consumer products. We can accommodate surface mount and through-hole PCB assemblies of any size, and manufacture oversized LED boards up to 5FT long.

Quality Certifications: IPC-A-610 CLASS 2 & 3 • UL Recognized, RoHS
INNOTECH LASER LLC     Booth # 458
Service Categories: Laser Engraving • Laser Marking • Lasers • Pad Printing • Screen Printing

Contract laser services and distributor of TYKMA Electrox Fiber lasers and Universal Lasers for CO2 lasers.

Service Categories: Assemblies - Electronic • Assemblies - Printed Circuit Boards • Assemblies - Electromechanical • Prototypes - Electronic • Assemblies - Electrical

Full service Electronics Contract Mfgr. Electronics & electro-mechanical assemblies to customer specs, top quality workmanship at the lowest cost. Prototypes, small & medium production of surface mount technology, through hole & mixed technology. Highly skilled staff to assist in product development & product mfg. Deeply committed to customer service.

Quality Certifications: IPC-A-610D • IPC/WHMA-A-620 • ISO 13485 • J-STD-001
INSACO INC.     Booth # 106
Service Categories: Grinding - Ceramics • Machining - Ceramics • Grinding - Glass • Ceramic Parts • Optical Polishing

Precision fabricator of ultra hard materials, utilizing advanced ceramic materials including sapphire, ceramics from all producers, glass, quartz, & many others. Machining to very precise dimension & tolerances in a variety of shapes & configurations as required. No standard parts/all mfg. to specific customer requirements. Prototype to production. No metals or plastics.

Service Categories: Ceramic Parts • Machining - Ceramics • Grinding - Ceramics • Ceramics - Metallizing & Plating • Prototypes - Machining

A leading manufacturer & fabricator of technical ceramic materials & machinable thermo-plastics. We offer engineering assistance during the prototype process through to production. We specialize in unique geometries made from high quality advanced materials. Competitive pricing with quick deliveries. Materials include Alumina Oxide, Boron Nitride, Macor™, Zirconia, PEEK, Ultem & More!

J.G. EDELEN CO. INC.     Booth # 453
Service Categories: Fabricating - Sheet Metal • Stampings - Metal • Fabricating - Steel • Stampings - Progressive Die

A 94 year old manufacturing & distribution company located in Baltimore MD. J.G. Edelen specializes in CNC punching, metal stamping, bending, tapping, inserts and assembly. Our in-house design team and die maker can assist you with all aspects of developing new products. Our knowledgeable and friendly sales team would be thrilled to assist you!

JO-VEK TOOL & DIE     Booth # 347
Service Categories: Stampings - Progressive Die • Stampings - Deep Drawn Shells • Stampings - High Volume • Machining - CNC Milling & Turning • EDM - Wire

A progressive stamping/deep drawn stamping facility with press capabilities from 5-100 ton that is supported by an in-house tool building department that consists of CNC Machining, CNC Turning, and Wire EDM.

Quality Certifications: ISO 9001:2008
K & S PRECISION METALS     Booth # 240
Service Categories: Tubing - Cold Drawn • Cutting - Tube & Pipe • Drilling & Tapping

Providing high quality brass, aluminum & copper tubing, rod, strips & sheets. Secondary operations include cut to length, draw to size, milling, tapping & threading. Low minimums & quick delivery.

Service Categories: Assemblies - Electromechanical • Assemblies - Mechanical • Assemblies - Turnkey • Fabricating - Sheet Metal • Special Machinery - Design, Build & Rebuild

As a diverse & highly capable contract manufacturer that provides a wide array of manufacturing services, Kalow has built a solid reputation of responding quickly & personally to help our customers achieve their goals. Our experienced team & detailed processes continue to result in dependable quality. We are also CSA Recognized. Like our motto says: "Tell us what you need - we'll make it happen."

Quality Certifications: CE • ETL • UL508a CERTIFIED • ITAR / ISO 9002
KIMCHUK INC.     Booth # 247
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Electronic • Engineering & Technical Services • Assemblies - Turnkey • Electronics - New Product Development

A Veteran Owned Small Business Electronic Manufacturing Services organization with a world class state-of-the-art facility, Kimchuk is a fast paced, technologically advanced, high product mix electronics firm specializing in Electronic and Electromechanical Contract Manufacturing Services and Engineering Services that is committed to excellence.

Quality Certifications: IPC-A-610D, IPC-J-STD • ISO 9001-2000 • AS 9100 • ITAR REGISTERED
KNOWLTON MFG. CO.     Booth # 309
Service Categories: Stampings - Progressive Die • Stampings - Deep Drawn Shells • Stampings - High Volume • Stampings - Short Run • Stampings - Metal

Providing Precision Engineered Stamped parts since 1935. We can produce short run, one of a kind parts and also high volume annual contracts. We can produce parts made out of CRS, HRP&O, aluminum, stainless and other materials. We have shearing, grinding and misc. welding as well as press brakes.

Service Categories: Stampings - Progressive Die • Fabricating - Sheet Metal • Assemblies - Electromechanical • Welding - Robotic • Wire Forming & Fabricating

We are the world-class manufacturers of metal components for the Major OEM markets. We have presses from 30 to 400 tons. Specializing in short to long run stampings with a variety of globally competitive tooling options. Sheet metal fabrication up to .500" thick. We also provide WIRE FORMING capabilities with Round / Square wire .080 - .625 thick.

Quality Certifications: ISO 9001:2008
L & R PRECISION TOOLING INC.     Booth # 301
Service Categories: Machining - Multi Axis • Machining - Exotic Materials • Machining - Precision CNC • Machining - Production • Prototypes - Machining

A Virginia company providing quicker lead times and better pricing utilizing a Fastems/Okuma Flexible Manufacturing System integrated with 3 - Okuma MB4000 4 axis horizontals. Prototype through production quantities, adept in Inconel & titanium to +/-.0002". Also 7 axis Okuma Mill/Turns, 4 & 5 axis Okuma & Haas milling and Makino wire EDM. www.lrprecisiontooling.com

Quality Certifications: AS 9100 • ISO 9001:2008 • ITAR • GIDEP
Service Categories: Castings - Die, Zinc • Castings - Zinc • Castings - Die • Tooling - Casting • Castings - Non-Ferrous

Manufacturer of precision Zinc die-castings. Specializing in Four-Slide Tooling Technology. Tight tolerances, thin walls, internal cast threads, secondary machining, assembly, product protective finishes. We have a fully equipped, on-site tool shop, offering complete tool builds, repairs and maintenance. Please submit RFQs to: rwilliams@lakesidecasting.com.

Quality Certifications: ISO 9001:2015
Service Categories: Castings - Investment • Castings - Steel • Castings - Ferrous

We manufacture investment castings from fractional ounces to 70 lbs. In-house capabilities include CNC machining, NDT, heat treating & complete to print parts.

Service Categories: Plastics - Injection Molding • Tooling - Plastic Injection Molding • Assemblies - Electromechanical • Machining - Precision CNC • Machining - Castings

An integrated manufacturer of quality, custom injection molded components and highly engineered tooling. Laszeray provides customers with a full suite of value-added services.

Quality Certifications: ISO 9001:2015
LEE SPRING     Booth # 255
Service Categories: Springs - Coil • Springs - Flat • Springs - Wave • Stampings - Fourslide

Springs in stock ready to ship or made to your specifications. Large selection of stock Compression, Extension, Torsion, HEFTY™ Die, REDUX™ Wave, LeeP™ Plastic Composite, MIL-SPEC, Belleville Washer, Battery and Constant Force Springs. Custom Springs, Stampings, Wire Forms and Fourslide design and manufacturing. Prototypes through large production runs.

Quality Certifications: ISO 9001 • RoHS / REACH • MIL SPEC AS24585 • MIL SPEC AS24586
Service Categories: Machining - Precision CNC • Metal Finishing - Chrome Plating • Machining • Machining - Multi Axis • Machining - CNC Milling & Turning

Over 40 years of prototype / production machining. Capabilities include CNC milling, CNC turning, 4th Axis Milling, Grinding, Welding, Painting, Engineering, Finishing, and Assembly.

Quality Certifications: ISO 9001:2008
Service Categories: Molds & Moldmaking - Plastic • Plastics - Injection Molding • Machining - Precision CNC • Plastics - Injection Molding • Laser Engraving

We specialize in precision machining, mold build and injection molding. With over 25 years in the injection molding industry, Maloney Tool and Plastics has the experience and resources to provide solutions to customers manufacturing needs. Onsite engineering, tooling, mold sample, inspection and production capabilities allow for full project control to be maintained.

Quality Certifications: ISO 9001:2008
Service Categories: Power Supplies & Batteries • Wire & Cable Harnesses • Cable & Wire Manufacturing

Manufacturer of Power Cords & AC/DC~DC/DC Power Supplies for use on PCB, desk top, wall mount and open frame.

Quality Certifications: ISO 9001:2000
MERCURY CORP.     Booth # 254
Service Categories: Fabricating - Sheet Metal • Metal Cabinets & Enclosures • Assemblies - Turnkey • Fabricating - Aluminum • Fabricating - Stainless Steel

AN INTEGRATED SOLUTION TO YOUR SUPPLY CHAIN - we build custom racks, frames, enclosures, plastics & stamping assemblies. CORE PROCESSES: Design, Metal Fabrication, welding of all types of metals, Plastic Injection Molding, Finishing, Turn-Key Assemblies & KAN BAN.

Quality Certifications: ISO 9001:2008 • ISO 13485 • AS 9100 • ITAR REGISTERED
MINOR RUBBER CO. INC.     Booth # 108
Service Categories: Rubber Molding • Rubber - Injection Molding • Extrusions - Rubber • Rubber - Compression Molding • Rubber - Transfer Molding

Custom molders, extruders and dip molders of rubber products. Also extensive line of standard catalog items, such as grommets, bumpers, extruded profiles, isolators, bellows, etc. Most items are searchable online at www.minorrubber.com.

Quality Certifications: MIL-I-45208A
MKS INC.     Booth # 203
Service Categories: Switches - Membrane • LED's • Lighting - Electroluminescent

Manufacturer of custom Electroluminescent Backlighting, Membrane Switches, Control Panels. Committed to Quality. CAD driven Laser Tooling assures consistent quality, low tooling costs, Fast Protos.

Service Categories: Plastics - Injection Molding • Machining - Precision CNC

MSI Molding Solutions, Inc. & Fermer Precision are sister companies; Thermal Plastic Injection Molding, & CNC machining specialists respectively; MSI located in Rome, NY & Fermer located at 161 Johnson Rd. Ilion, NY 13357, 315-822 6371. www.fermerprecision.com Together as a part of Fiber Instrument Sales group representing 7 companies with annual sales of more than $75 million in domestic and international markets, we are a market leader.

Quality Certifications: ISO 9001:2008 • ISO 16949-2002
Service Categories: Extrusions - Impact • Fabricating - Aluminum • Machining - Aluminum • Assemblies - Mechanical • Forgings - Cold

We are a leading manufacturer of aluminum impact extrusions for many different markets including automotive, defense, and electrical. Benefits include increased strength from cold working, uniform grain structure (no voids), and different wall and bottom thicknesses. We have in-house heat treatment and final CNC machining. We are ISO/TS 16949 & ISO 14001 certified.

Quality Certifications: ISO/TS 16949
Service Categories: EDM • EDM - Wire • EDM - Sinker

Wire EDM & Sinker EDM & EDM Drilling services using all state-of-the-art, Mitsubishi, anti-electrolysis machines, specializing in medical devices, tool & die components, plastic extrusion tooling. Prototype & Production EDM services are performed on submerged arc machines with auto-threaders. 40 CNC EDM machines & dozens of CNC machining centers. FAST 24/7 SERVICE!

Quality Certifications: ISO 9001:2008 • ISO 13485:2003
NEXUS DESIGN LLC     Booth # 325
Service Categories: Engineering & Technical Services • Industrial Design Services • Mechanical & Electronic Design • Electronics - New Product Development • Tooling - Models & Prototypes

We are a full service industrial design and engineering firm, developing new products from initial concepts to detailed, production ready designs for a wide variety of clientele. Services offered by Nexus Design: Industrial Design, Mechanical Engineering, Electronics Integration, and Vendor Sourcing.

Service Categories: Metal Finishing - Plating • Metal Finishing - Electroplating • Metal Finishing - Precious Metal Plating • Metal Finishing - Electropolishing • Metal Finishing - Electroless Nickel

General Metal Finishing is part of the Precision Engineered Products Group of NN Inc., a leading supplier of specification rack barrel, and vibratory electroplating and electropolishing services serving medical, energy management, aerospace/defense and transportation industries.

Quality Certifications: ISO 9001:2008 • ISO 13485:2003 • NADCAP
Service Categories: Coatings - Physical Vapor Deposition • Coatings - Titanium Nitride • Coatings • Nitriding

A provider of PVD coatings, Diamond Like Carbon (DLC) coatings, Plasma ion Nitriding and Melonite salt bath ferritic nitrocarburizng. Our surface treatments are used by the medical\dental, aerospace, firearms, cutting tool users and manufacturers, injection molders, automated equipment manufacturers and companies interested in improving the life of their components.

Quality Certifications: ISO 9001:2008 • AS 9100
NOVATRONIX INC.     Booth # 352
Service Categories: Assemblies - Electronic • Assemblies - Printed Circuit Boards • Assemblies - Electromechanical • Engineering & Technical Services • Electronics - New Product Development

Turnkey EMS for Printed Circuit Board Assembly (PCBA) and High Level Assembly, box build. Engineering services for product design, Altium/SolidWorks. Prototype to Volume Production in a High-Tech manufacturing environment. Surface Mount, Through Hole, Box Build, Testing, Conformal Coating and Potting. Quality Certified design & manufacturing.

Quality Certifications: ISO 9001, AS 9100 • ITAR, UL APPROVED • IPC 610 CLASS 3 • J-STD-001 CLASS 3
Service Categories: Castings - Aluminum • Castings - Sand • 3D Printing • Machining - Castings • CAD Design Services

Providing "Zero Leak" castings. Specializing in "pressure-tight & leak-free castings" exhibiting machining characteristics equal to bar stock. Providing industry short 4 week lead times. Automated "Air Set" and "Green Sand" molding. Offering CAD & design support, process & engineering reviews along with in-house heat treat capabilities. Machine complete option available.

Quality Certifications: ISO 9001:2008
ONDRIVES.US CORP.     Booth # 331
Service Categories: Gearboxes • Gears • Couplings - Misalignment • Machining - CNC Milling & Turning • Machining - Precision CNC

We are a leading manufacturer and distributor of precision mechanical components and assemblies. With extensive knowledge and experience in mechanical component design and application, our engineering team is committed to creating quality solutions that will exceed your expectations at competitive prices. Our manufacturing facility will ensure parts are made to your specifications.

Quality Certifications: ISO 9001:2015 • ITAR REGISTERED
PARATRONIX     Booth # 447
Service Categories: Coatings - Conformal • Electronic Encapsulations • Special Machinery - Design, Build & Rebuild • Machinery Sales & Services - New & Used

We provide high quality Parylene conformal coating services for industrial and medical applications, & design, manufacture & sell our line of vapor deposition systems. www.paratronix.com – Paratronix QC Certifications: ITAR, US/CA Joint Cert. Program, NRTL Certified, CE Compliant & UL508A Compliant. Paratronix is a new division of MicroChem Corp.

Quality Certifications: ISO 9001:2008
PCM PRODUCTS INC.     Booth # 105
Service Categories: Photochemical Etching & Machining • Shielding - EMI/RFI • Chemical Milling

We produce precision, burr/stress free parts, .1" thick down to .0001" thick. In-house plating, forming, heat treating and assembly. Competes with laser cutting and EDM. COMPLIANT TO ISO 9001:2000 & AS9100B & ANSI/ASQ Z1.4-2003.

Quality Certifications: MIL-I-45208
PENASACK INC.     Booth # 275
Service Categories: Fabricating - Sheet Metal • Welding & Weldments • Fabricating - Stainless Steel • Electronic Enclosures • Assemblies - Turnkey

Our core business is Metal Fabrication with the capability of complete turnkey electromechanical assemblies, precision weldments, enclosures and fabrications in Stainless Steel, Mild Steel and Aluminum. Our Welders are AWS Certified and Resistance Welding is AWS D17.2(Mil-W-6858) O A.

Quality Certifications: AWS Welding • AWS D17.2 (MIL-W-6858)
Service Categories: Saw Cutting • Tubing - Cold Drawn • Cutting - Tube & Pipe • Aluminum - Materials • Alloys

Production cutting: Aluminum, Stainless, Cold finish, Alloy, Tool Steel, Brass. Precision plate cutting: Aluminum, Stainless, Tool Steel. Also available: Milling, Grinding, Gun-Drilling, Hollow Bar.

Quality Certifications: ISO 9001:2008
Service Categories: Rubber Molding • Rubber To Metal Bonding • Rubber Fabrication

Manufacturing high quality custom rubber components. Operations include custom molding, custom formulating, compression, transfer & injection molding, painting & finishing, assembly & packaging. Die-cutting & rapid prototyping also available. Total Customer Satisfaction Since 1911.

Quality Certifications: ISO 9001:2015
PLASTIC DESIGN INT'L. INC.     Booth # 241
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Tooling - Plastic Injection Molding

We have evolved & expanded our initial core competencies of injection molding into a broad range of products & services, tailored to meet the needs of the changing manufacturing world of today & tomorrow, which include molded components, sub-assemblies & complete products. For inquiries email us at sales@plasticdesign.com.

Quality Certifications: ISO 9001:2015
PLEIGER PLASTICS     Booth # 350
Service Categories: Polyurethane - Parts • Polyurethane - Rollers • Plastics - Thermoset Molding • Plastics - Sheet, Rod & Tube • Screen Printing

Specializing in full service stock shape & custom molded solid and foam polyurethane. Over 20 different Plei-Tech material compounds including options with general MSHA and FDA approvals. Only licensed U.S. custom molder of Vulkollan polyurethane.

PNC INC.     Booth # 201
Service Categories: Assemblies - Printed Circuit Boards • Fabricating - Printed Circuit Boards • Electronics - New Product Development • Surface Mount Technology - Assembly • Assemblies - Turnkey

A Total Concept Company specializing in Electronic Design, PCB Manufacturing, and Electronic Assembly, including Box builds and functional testing. Prototype to Production, Single Sided to 40 Layers, Flex and Rigi-Flex, Impedance Control, Via fill, Hybrids, Metal Core, FR4, Polyimide, Rogers PTFE and Ceramic.

Quality Certifications: AS9100 D / ISO 9001:2008 • MIL-PRF-31032 • MIL-P-55110 • ITAR & UL REGISTERED
Service Categories: Laser Cutting • Fabricating - Steel • Welding & Weldments • Welding - Robotic • Fabricating - Sheet Metal

A high-tech contract manufacturer with 10-Trumpf Lasers, 3-Turret Punches, 9-CNC Press Brakes, 27-Welding Stations, and 2-Robotic Welders that provide just-in-time manufacturing solutions for single steel components to complete sheet metal & structural steel weldments & sub-assemblies.

Quality Certifications: ISO 9001:2000 • ISO 14001
Service Categories: Embedded Devices • Systems Integration • Software For Job Shops & Manufacturers • Motion Control • Electronics - New Product Development

Custom software engineering of embedded and real-time systems for mission-critical and safety-critical environments.

Quality Certifications: ISO 9001:2015 • ISO 13485:2016
PROTOLABS     Booth # 232
Service Categories: Rapid Prototyping • Plastics - Injection Molding • 3D Printing • Machining - CNC Milling & Turning • Fabricating - Sheet Metal

We are the world's fastest digital manufacturing source for rapid prototyping and on-demand production. Our technology-enabled company produces custom parts in as fast as 1 day with automated 3D printing, CNC machining, sheet metal fabrication, and injection molding processes.

Quality Certifications: ISO 9001:2015 • ITAR REGISTERED • AS 9100
PROTOTEK MFG.     Booth # 346
Service Categories: Rapid Prototyping • Prototypes - Rapid Sheet Metal • Prototypes - Fabrication • Machining - Precision CNC • Fabricating - Sheet Metal

Supplier of quick turn PRECISION SHEET METAL & CNC MACHINED PRODUCTS for the prototype & production markets such as robotics, semi-conductor, telecommunications, military, pharmaceutical, medical, computer technologies & aeronautics. Plating, painting, powder coating, silk screening & assembly capabilities all under the same roof. Quotes now, Parts now!

Quality Certifications: RoHS/ITAR/DFAR • SAM CAGE CODE 4WQ72 • ISO 9001:2008
Service Categories: Castings - Non-Ferrous • Castings - Sand • Castings - Investment • Castings - Ferrous • Castings - Brass

A premier manufacturer of Brass, Bronze, & Aluminum Sand Castings. We also do Investment, Die & Permanent Mold. Complete finishing available.

Quality Certifications: MIL STD 45662
Service Categories: Shielding - EMI/RFI • Extrusions - Rubber • Rubber Molding • Surface Mount Technology - Assembly • Optical Components

As the inventor of conductive fabric over foam shielding gaskets in 1987, Schlegel Electronics Materials has always set the standard for highly flexible conductive fabrics. Schlegel Electronics designs and develops the latest technology in conductive fabric over foam, conductive foam, conductive fabric over silicone, EMI / Enviromental gasketing, and conductive tapes.

Quality Certifications: ISO 9001:2008 • UL RECOGNIZED • ITAR • DOD REGISTERED
Service Categories: Plastics - Injection Molding • Prototypes - Plastic • Plastics - Low Volume • Molds & Moldmaking - Plastic • Plastics - Painting

We are a full service plastic injection molding company specializing in prototype injection molding, low to mid volume production and mold making. We are headquartered in the Clearwater Beach/Tampa Bay area and have two manufacturing locations, Port Richey and Brooksville, FL. Employing 160, Seaway strives to provide technology leadership and performance excellence to medical, aerospace, military, packaging, food service, industrial and consumer products.

Quality Certifications: ISO 13485:2016, ISO 9001:2015 • ANSI/ASQ Q9001-2000 • ITAR REGISTERED • NADCAP ACCREDITED
Service Categories: Gears • Gearboxes • Machining - Conventional CNC • Fabricating - Heavy Steel & Plate

Custom gear boxes & Gears, Gear fabricating from 1/4" to 80" in diameter with quantities from 1 to 10,000 plus. Heavy machining & welding fabricating with CNC equipment.

Service Categories: CAD Design Services • Industrial Design Services • Conversion - Metal to Plastic • Measurement & Inspection • Prototypes - Models

For two decades, the team at Shore Plastic Technologies has been trusted by clients domestic & abroad for our experience in uniquely innovative products. We take you from drawing board concepts to commercially viable reality. We are a consulting firm that has proficiencies in design, simulation, metrology, validation, compliance and molding and is a company worth knowing!

Service Categories: Heat Treating • Heat Treating - Vacuum Carburizing LPVC • Brazing - Vacuum Furnace • Nitriding

We offer high quality Vacuum Heat Treating and Brazing services producing bright, scale-free parts with minimal distortion. Markets served include aerospace, medical, power generation, firearms & ordnance, and more. Our state-of-the-art vacuum furnaces range from lab sized to 48 feet. Four plants located in Souderton, PA, Hermitage, PA, Greenville, SC, and Fontana, CA.

Quality Certifications: ISO 9001:2015 ITAR • AS 9100D • NADCAP • MEDACCRED
Service Categories: CAD/CAM Software • CAD/CAM Training • Reverse Engineering • CAD Design Services

Since its founding in 1997, SIS has focused on the development of new and innovative technologies and refined its staff abilities in Systems Integration, Research and Development, Technology Transfer, and Enterprise Support Services in order to develop vastly improved technology solutions to improve process efficiencies for our customers.

SPEC FAB     Booth # 440
Service Categories: Welding & Weldments • Bending - Custom • Fabricating - Steel • Engineering & Technical Services • Cutting - Tube & Pipe

A metal fabrication partner that will help make your business stronger. Even beyond welding, forming, cutting and finishing, Spec Fab provides expert advice, friendly service and custom manufacturing solutions.

STEWART EFI LLC     Booth # 207
Service Categories: Stampings - Deep Drawn Shells • Stampings - Progressive Die • Stampings - Fourslide

A mfgr. of medium-to-high volume precision progressive die stampings; deep-drawn, slide-formed components; wire forms; & multi-component assemblies. In-house design & tool building, reel-to-reel stampings, transfer press & secondary tapping, welding, staking, screw insertion, value-added plating, heat treating, & secondary processes. Facilities located in CT & TX.

Quality Certifications: ISO/TS 16942:2009 • ISO 9001:2008
Service Categories: Silicone / Rubber - Liquid Injection Molding • Shielding - EMI/RFI • Rubber Fabrication • Gaskets, Seals, Washers & O-rings • Prototypes - Rubber

Die cut, molded & water jet cut silicone rubber and high performance elastomers for sealing and cushioning requirements. Thermally/electrically conductive. Fast-turn prototypes using Water Jet Cutting and tool-less Flash Cutting. Acrylic and Silicone Adhesive Backings are applied to Silicone Rubber Foam, Solid and Sponge.

Quality Certifications: ISO 9001:2015 • ITAR APPROVED
Service Categories: Castings - Zinc • Stampings - Metal • Stampings - High Volume • Stampings - Progressive Die • Castings - Die, Zinc

For over 90 years, we have provided the automotive industry with high-quality zinc die casting & stamping; offering a wide range of die casting, stamping & plating services for the non-automotive market as well. STRATTEC designs & builds nearly all their production die cast & stamping tools. We can take your products from design concept, tool build, to production & delivery.

Quality Certifications: ISO/TS 16949 • ISO 14001
Service Categories: Machining - Swiss Laser & CNC Swiss • Machining - Precision CNC • Machining - Miniature Precision • Machining - Stainless Steel • Machining - Exotic Materials

CNC Swiss type operation with 13 axis capabilities for long or short run. Capacity range from .015 to 1.500 Stainless, Plastic and Exotic Materials our specialty. We also offer six-axis Swiss machining integrated with NEW laser cutting capability. CNC turning to 2-1/4 with 8" chucking capacity.

Quality Certifications: ISO 9001:2015 • ISO 13485
SYSCOM TECH     Booth # 305
Service Categories: Assemblies - Printed Circuit Boards • Surface Mount Technology - Assembly • Assemblies - Turnkey • Assemblies - Electronic • Wire & Cable Harnesses

A one-stop technology solution company providing turn key electronic manufacturing services including: Printed Circuit Board Assembly, Cable/Harness Assembly, Electro-Mechanical Assembly, RF/Microwave, Chassis & Full System Assemblies, Full Project Management, Box Build, Distribution, Inventory Management & Functional Testing.

Quality Certifications: AS 9100 REV C / ISO 9001:2008 • QC 080000 IECQ RoHS • IPC-A-610 / 620 • ITAR REGISTERED
Service Categories: Silicone / Rubber - Liquid Injection Molding • Rubber Molding • Rubber To Metal Bonding • Bushings • Heat Sinks

Manufacturer of Alpha-GEL brand silicone parts & components for many applications: Anti-vibration parts, Shock-absorbing materials, Thermally Conductive Pads & Paste. Alpha-GEL is soft, highly-durable, environmentally-friendly silicone that can be used over a wide temperature range (-40 C to +200 C). Visit us at www.taica-na.com

Quality Certifications: ISO 9001 • RoHS • UL 746 D • JIS/DTS
Service Categories: Measurement - Software • Material Handling

We are a Logistics Technology & Resource Company. TBL provides and implements practical supply chain solutions that reduce costs & increase productivity to improve our clients bottom line.

TECH CAST LLC     Booth # 437
Service Categories: Castings - Investment • Prototypes - Rapid Casting • Castings - Stainless Steel • Castings - Steel • Castings - Ferrous

Air melt, 100% commercial investment cast foundry. Product Distribution: NAFTA and Europe. Preferred supplier of closed impellers for the military and oil/gas industry, mission critical components to support programs such as battlefield and shipboard applications, i.e. submarines and light armored combat vehicles. Large investment castings up to 500 lbs.

Quality Certifications: ISO 9001:2008
TECHNH INC.     Booth # 120
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Plastics - Two Shot Injection Molding

Plastics injection molding and plastics injection molding tooling company. TechNH offers complete plastics engineering assistance. We specialize in product, tooling and process development. We offer two-shot, over- and insert-molding capabilities; with a complete line of secondary operations required for component and assembly completion as well.

TEMPCO MFG. CO. INC.     Booth # 142
Service Categories: Stampings - Metal • Fabricating - Sheet Metal • Assemblies - Mechanical • Welding & Weldments • Tools, Dies & Fixtures

With over 70 years of experience, Tempco Manufacturing produces precision metal stampings, precision sheet metal fabrications, and mechanical assemblies for clients across numerous industries. Tempco Manufacturing offers a complete tool & die room to go along with secondary services to be your one stop shop for metal stampings and sheet metal fabrications.

Quality Certifications: AS9100D • ISO 13485:2016 • ISO 9001:2015
Service Categories: Electronic Components • Adhesives • Fans & Blowers • Printed Circuit Boards - Aluminum Clad

Henkel Adhesive Electronics is a division of global material supplier powerhouse, Henkel Corporation. A leader in die attach, underfill, solder, low pressure molding, printable ink and Bergquist brand thermal management materials, Henkel AE has developed some of the industry's most innovative and enabling electronic material solutions.

Quality Certifications: ISO 14001:2004 • ISO 9001:2008 • TS 16949:2002
Service Categories: Fabricating - Sheet Metal • Laser Cutting • Machining • Welding & Weldments • Fabricating - Heavy Steel & Plate

We are a global manufacturing company offering a wide range of services to OEM’s throughout the United States, Canada, and Western Europe. We produce Sheet Metal and Heavy Plate Fabrications, Manual and Robotic Weldments, CNC Machined parts and Full Assemblies.

Quality Certifications: ISO 9001:2015 • AWS D17.1 • AWS D1.3 • AWS D1.1
Service Categories: Electronics - New Product Development • Surface Mount Technology - Assembly • Testing - Printed Circuit Boards • Prototypes - Electronic • Embedded Devices

We are a one-stop-shop for your electronic solutions. We have provided our clients with high quality engineering design, software development, and production manufacturing since 1971. Let our years of experience and range of services simplify your project and reduce your time to market.

Service Categories: Stampings - Metal • Screw Machining - Swiss/CNC Swiss • Stampings - High Volume • Electronics - New Product Development • Tools, Dies & Fixtures

Tooling Dynamics specializes in high volume, precision metal stampings using thin gauge metals & quality swiss screw machine work both under very tight tolerances for all industries.

Quality Certifications: 6 SIGMA • ISO 9001:2008
Service Categories: Metal Finishing - Plating • Metal Finishing - Electroless Nickel • Metal Finishing - Anodizing • Powder Coating • Metal Finishing - Passivating

Plating, Barrel & Rack (Zinc, Zinc Nickle, Nickle, Copper & Tin), Anodizing, TY II & TY III (Hardcoat), Chem Film (Iridite/Alodine), Passivating, Ecoat, Powder Coat, Wet Paint, Electropolish, Black Oxide; Phosphate (Zinc, Manganese & Iron), Electroless Nickel, Carc Paint; Kynar, Abrasive Blasting, Silk Screening, Part Marking, Salt & Xray Testing, and many more.

Quality Certifications: ISO 9001 • NADCAP APPROVED • AS 9100
TRYCO TOOL & MFG.     Booth # 217
Service Categories: Stampings - Metal • Stampings - Progressive Die • Assemblies - Mechanical • Stampings - Tapped • Stampings - Deep Drawn Shells

Precision Metal Stampings. An aggressive metal stamping company specializing in precision stampings & assemblies in medium to long run quantities. Presses range from 22-200 tons. Work with all metals.

Quality Certifications: ISO 9001
WEPCO PLASTICS INC.     Booth # 104
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Prototypes - Plastic • Plastics - Elastomeric Overmolding • Plastics - Insert Injection Molding

We are a family owned full-service mold making and plastic injection molding company offering American made parts. We specialize in rapid prototype onsite tooling and short to medium run plastic injection molding with 4 axis machining, fixturing, and secondaries.


© 2019 The Job Shop Company • 16 Waterbury Road, Prospect, CT 06712 • (800) 225-4535