Southern California Design-2-Part Show
November 15 & 16, 2017
San Diego Convention Center • San Diego, CA

Search by Category


Search by Keywords

  Reset Search  

0 Exhibitors to Meet

Exhibitor List

Listed below are the current exhibitors and service categories of companies in the show.
This page is also an interactive tool for you to use when planning your personal visit.

[ 148 ] companies match your search.
FEATURED EXHIBITORS listed first alphabetically
ACCU-SEMBLY INC.     Booth # 420
Service Categories: Assemblies - Electronic • Assemblies - Printed Circuit Boards • Prototypes - Electronic • Assemblies - Turnkey • Assemblies - Electromechanical

No matter what industry or type of electronic assemblies you require, Accu-sembly can manufacture them to your exact specifications. We can take your project from prototype to full production while delivering the value, quality and reliability you need. We offer turnkey procurement, flexible, responsive service and on-time delivery.

Quality Certifications: AS 9100 • ISO 9001:2008 • ITAR • J-STD-001 CLASS 3
ADRON TOOL CORP.     Booth # 132
Service Categories: EDM • EDM - Wire • EDM - Sinker • EDM - Small Hole Drilling • Machining - Production

Wire EDM specialists with over 50 CNC mach., CNC (sinker) std. EDM; largest capacity, 40"x32"x18", workpiece wt. 10,000 lbs., 27-1/2" thick; metal parts rapid prototyping svc. and prod. runs of complex, contoured shapes in tough to mach. or exotic mtl.; CNC production machining, coord. measuring sys., SPC, OGP optical non-contact measuring.

Quality Certifications: ISO 9001:2008 • AS 9100 • NADCAP AS7116
Service Categories: 3D Printing • Machining - Precision CNC • CAD Design Services • Consulting - Manufacturing • Engineering & Technical Services

It is the extensive knowledge and diligent craftsmanship of our engineers, machinists, programmers and seasoned veterans that allow us to deliver unmatched precision in plastics manufacturing. AIP Precision Machining specializes in understanding and envisioning how to manufacture extremely complex designs quickly and in the most cost-effective manner.

Quality Certifications: ISO 13485:2016 MEDICAL • AS 9100 ISO 9000 • ISO 9001:2015 • FDA REGISTERED
ASH INDUSTRIES     Booth # 117
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Plastics - Rotational Molding • Plastics - Hot Stamping & Screening • Prototypes - Plastic

Engineered for You. In-House MIM, Thermoplastic, and Silicone Injection & Rotational Molding & Tooling as well as cast epoxy components & 7-Axis Swiss Lathe production. Molding includes custom inserts & over-molding, two shot molding. Component assembly, secondary processing & decorating, utilizing the latest in CNC, EDM & Modeling technology.

Quality Certifications: ISO 9001 • ISO 7 CLASS 10K CLEAN ROOM
Service Categories: Testing - Materials • Testing - Mechanical Standards • Testing - Environmental

Over 60 years of expertise in the aerospace, automotive, marine, and construction fields. We offer a wide array of testing capabilities at a competitive price. Our attention to service and detail has made us an industry leader. Testing capabilities include Metallurgical, Physical, Mechanical, Environmental, Chemical, Heat Treatment, T-Peel/FRP, and Fastener.

Service Categories: Plastics - CNC Machining • Plastics - Compression/Transfer Molding • Die-Cutting • Plastics - Thermoforming/Vacuum Forming • Assembly Hardware

The leading fabricator & distributor of non-metallic materials. Services include tight tolerance machining, milling, punching, vacuum forming, bending, turning, sawing & sanding. Also manufacture Glass Polyester (Nema GPO-3) in sheet, angle & channel.

Quality Certifications: ISO 9001-2000 • UL CERTIFIED
Service Categories: Stampings - Fourslide • Stampings - Metal • Stampings - Short Run • Springs - Coil • Assemblies - Mechanical

Metal Forming, Springs & Sheet Metal Fabrication. All parts custom made. Excellent in-house Engineering & Design support. Aerospace; Automotive; Computers; Defense; Electronics; Hardware; Irrigation; Medical Equipment & Devices; Recreation; Telecommunications. Manufacturing plants in CA & Mexico. Both facilities are AS9100C / ISO 9001:2008 Registered. For information or quotes please contact or 800-385-9608.

Quality Certifications: AS9100C / ISO 9001:2008
Service Categories: Hydroforming • Machining - Precision CNC • Fabricating - Sheet Metal • Stampings - Deep Drawn Shells

Manufacturing company specializing in hydroform metal forming & sheet metal fabrication. Hardware produced for commercial industries (including aircraft), military, satellite & space.

Quality Certifications: ISO 9001 • AS 9100 • ITAR REGISTERED
Service Categories: Castings - Die • Machining - Castings • Metal Finishing - Painting • Assemblies - Electromechanical • Assemblies - Turnkey

Complete (1) Source Responsibility for Contract Manufacturing, Electromechanical Fabrication, Design Engineering, Prototype Development, Machine from Solid, Medium to High Volume Production, Secondary Machining, Powder Coating, Wet Painting, Silk Screening, Chromating, Impregnating, Pressure Testing, Complete Mechanical Assembly, Sourcing, Warehousing & Worldwide Shipping.

Quality Certifications: ISO 9001:2008 • ISO 14001-2004
CENTURY RUBBER CO. INC.     Booth # 114
Service Categories: Rubber Molding • Rubber To Metal Bonding • Gaskets, Seals, Washers & O-rings • Rubber Stampings • Prototypes - Rubber

The company manufactures precision custom molded & die-cut elastomer products, utilizing compression, transfer & injection molding processes. We work with most elastomers including silicone, fluorosilicone, viton, neoprene, nitrile, EPDM & natural rubber. Strong emphasis on rubber to metal bonding. Made in America.

Quality Certifications: AS 9100D, ISO 9001:2015 • ITAR REGISTERED • US/Canada JCP Certified
COONER WIRE     Booth # 326
Service Categories: Wire & Cable Harnesses • Assemblies - Cable • Electronics - New Product Development • Plastics - Injection Molding • Prototypes - Electronic

We maintain the world's largest inventory of flexible wire and custom cables. Cooner Wire utilizes both standard and unique wire constructions that range in size from 42 AWG mini coax to 4/0 AWG Extra Flexible Power Cable; from silicone cable to shielded cable, hookup wire to molded cable assemblies, Cooner Wire remains the first choice in specialty wire and cable design.

Quality Certifications: ISO 9000:2008 • ITAR, FDA & UL REGISTERED • RoHS / REACH • CAGE CODE
DAYTON ROGERS MFG. CO.     Booth # 118
Service Categories: Stampings - Metal • Fabricating - Sheet Metal • Assemblies - Stamped • Stampings - Short Run • Rapid Prototyping

For 90+ years, we have been providing metalforming solutions to industry. Modular tooling/progressive metal stamping, metal fabrication, welded assemblies, prototypes, drawn shapes, complete tool & die facility. All secondary operations. Seven locations to serve you. Building on Experience... Unequaled Craftsmanship... Stamping and Forming an Impact Now & into the future.

Quality Certifications: ISO 9001:2008 • AS 9100 • ITAR
DB ROBERTS     Booth # 101
Service Categories: Fasteners • Electronic Hardware • Assembly Hardware • Levers, Knobs & Handles • Masking

Since our inception, we have been focused on providing solutions for fastener applications in Sheet Metal Fabrication, Metalworking, and Industrial Electronics. Our "Superior Customer Service" and "Commitment to Excellence" has proven to be a winning formula fueling innovation and rapid growth year after year.

Quality Certifications: ISO 9001:2015 • AS 9120B
DDH ENTERPRISE INC.     Booth # 430
Service Categories: Wire & Cable Harnesses • Assemblies - Turnkey • Fabricating - Sheet Metal • Surface Mount Technology - Assembly • Assemblies

We consist of US & worldwide manufacturing facilities specializing in cable and wire harnesses, printed circuit board assemblies, sheet metal fabrication and complete box build manufacturing solutions. All are under the same ownership. We offer both turn-key and consignment services.

Quality Certifications: ISO 13485:2003 • AS9100/ISO2015 • UL REGISTERED • ITAR
DINSMORE INC.     Booth # 242
Service Categories: Rapid Prototyping • CAD Design Services • Prototypes - Machining • 3D Printing • Tooling - Rapid Injection Molding

We specialize in product design & development, 3D printing, rapid prototyping, manufacturing and tooling. With 100% satisfaction guaranteed, we strive to meet our customers' needs with competitive pricing, fast turnaround times, & quality workmanship. We proudly serve all industries medical, dental, aerospace, automotive, electronics, consumer products & more.

Quality Certifications: ISO 9001:2015 CERTIFIED
DYSINGER INC.     Booth # 302
Service Categories: Machining - Precision CNC • Grinding - Precision • Machining - Large Parts • Assemblies - Mechanical • EDM - Wire

Whether it is precision machining services, sub-assembly support, or high value added process engineering solutions, we have the knowledge and the tools to turn your production problems into profitable opportunities. We strive to develop solid customer relationships based upon high quality standards, reliable performance to commitments and attentive service.

Quality Certifications: ISO 9001:2015 • AS9100:2016 Rev D • ITAR
Service Categories: Assemblies - Electromechanical • Machining - Precision CNC • EDM - Wire • Grinding - Jig • Machining - Miniature Precision

Specializing in precision machining, complex electro-mechanical assembly and the design and build of automated/robotic specialized production equipment.

Quality Certifications: ISO 9001:2008 • ISO 9001, ISO 13485 • AS 9100 REV C • ITAR CERTIFIED
Service Categories: EDM - Wire • Machining - Exotic Materials • Machining - CNC Milling & Turning • Grinding - Rotary Surface • Plastics - CNC Machining

Green Flash Machine LLC purchased B&A Wire EDM & Manufacturing the first of October 2017. We do titanium, inconel, silicon bronze, bronze, and plastics for underwater and other applications. We have two wire EDM machines, a 4-axis verticle mill, two lathes, and surface grinding machine. We do small to medium size production runs and also quick turn around parts.

Service Categories: Laser Engraving • Laser Cutting • Laser Welding - Mold Repair • Lasers • EDM - Small Hole Drilling

EDM machines, Laser Engraving, Laser Cutting, and Laser Welding.

Service Categories: Fasteners • Electronic Hardware • Adhesives • Assemblies - Electrical • Assembly Hardware

Our SAE AS9120 Registered Quality Management System & full service Quality Assurance facilities coupled with many years of technical sales experience & deep product line inventory ensure our commitment to total customer satisfaction. Together these make Hardware Specialty an unbeatable source for all your fastener & electronic component requirements.

Quality Certifications: SAE AS9120 • ISO 9001:2008 • ISO 14001 • MIL STD 45662A
I C A CORPORATION     Booth # 130
Service Categories: Machining - CNC Milling & Turning • Electronic Enclosures • Fabricating - Sheet Metal • Assemblies - Mechanical • Prototypes - Machining

Employee owned company providing build-to-print metal component parts & assemblies to the defense, analytical instrumentation & transportation industries. Wide range of capabilities - close tolerance CNC milling & turning; 5-axis machining; optomechanical component machining; sheet metal fabrication; custom electronic enclosures; welding; mechanical assembly.

Quality Certifications: ISO 9001 • ITAR REGISTERED
KSM ELECTRONICS INC.     Booth # 428
Service Categories: Assemblies - Cable • Assemblies - Electromechanical • Assemblies - Electronic • Assemblies - Turnkey • Assemblies - Mechanical

Custom Wire and Cable Contract Manufacturer. KSM specializes Cable Assemblies, Box Builds, Mechanical Assemblies and a variety of value added services. KSM services major markets including Military, Aerospace, Medical and a variety of Industrial applications.

Quality Certifications: ISO 9001:2008 • UL & CSA • IPC 610 • SIX SIGMA
LASEA INC.     Booth # 446
Service Categories: Laser Machining - Micro • Industrial Equipment • Laser Engraving • Optics - Precision • Laser Cutting

Designs and manufactures workstations, laser machines and beam management modules for applications such as marking, engraving, cutting, drilling, texturing, thin film removal, welding and micromachining. LASEA Inc. is equipped with the latest femtosecond laser micromachining station and offers application lab and contract manufacturing.

Quality Certifications: ISO 9001
Service Categories: Bar Coding • Plastics - Hot Stamping & Screening • Switches - Membrane • Labels, Tapes & Decals • Die-Cutting

Manufacturer of high quality custom labels, nameplates, panel overlays, serialized & bar-coded property ID labels, membrane switches, shielding, and custom converted products. Laser cutting also available.

Quality Certifications: CSA & UL APPROVED • ISO 9001:2008 • MIL-P19834B • MIL-P6906B
OSI ELECTRONICS     Booth # 322
Service Categories: Electronic Hardware • Assemblies - Electronic • Assemblies - Printed Circuit Boards • Assemblies - Electromechanical

We are a Manufacturer of Aerospace, Avionics, Commercial & DOD Circuit Board Assemblies and Value Added Assemblies, Electronic Mil-Spec Connectors and M39029 Connector Contacts, Cable/Harness and Electro/Mechanical Box Build Assemblies & Over Molded Electronics for OEMs. Also, Value Added Assembly of Products for the Medical Industry. Our six facilities incorporate 450,000 sq.ft.

Quality Certifications: AS 9100D • ISO 9001:2008 • AS 9110B • ISO 13485:2003
Service Categories: Machining - CNC Milling & Turning • Machining - Weldments • Machining - Precision CNC • Grinding • Lapping

A small, 20 person job shop, PPI specializes in the manufacture of precision machined parts for the aerospace, defense, and medical devices industries. We are extremely competent when tolerances of .0001" or better and have delivered 1 helium light band in flatness, .000005" in roundness and .003" wall thickness.

Quality Certifications: ITAR • ISO 9001 / AS 9100 • WBE • SBA
PENCOM     Booth # 240
Service Categories: Fasteners • Machining - CNC Milling & Turning • Screw Machining • Material Handling • Assemblies - Mechanical

Global source for custom and standard fasteners; mechanical components and thermal management solutions. Our motto: Manufacturing Globally - Supplied Locally captures our ability to provide customers with low-cost production advantages and inventory automation capabilities from our twenty-five global facilities.

Quality Certifications: ISO 9001 • RoHS
PROTOCAST - JLC     Booth # 413
Service Categories: Castings - Investment • Castings - Ferrous • Castings - Non-Ferrous • Castings - Stainless Steel • Castings - Aluminum

Providing prototypes and production investment castings and CNC machining services for the aerospace, medical, communications, defense and commercial markets. Protocast-JLC (John List Corporation) works with both non-ferrous and ferrous metals. In-house 3D printing capabilities. ITAR registered and AS9100 certified. All parts are produced in the USA.

Quality Certifications: AS 9100 • ISO 9001:2008 • ITAR
PURPLE PLATYPUS     Booth # 224
Service Categories: 3D Printing • Rapid Prototyping • Rapid Prototyping - Equipment • Plastics - Injection Molding • Machining - CNC Milling & Turning

Located in Southern California, Purple Platypus is the preferred distributor of Stratasys & Desktop Metal 3D printers, Roland mills, EviXscan 3D scanners, and SpaceClaim modeling software - helping manufacturing/R&D customers propel their products to market more efficiently. 3D printing services are also available through our sister company Purple Porcupine, at

RAY PRODUCTS INC.     Booth # 120
Service Categories: Plastics - Pressure Forming • Plastics - Thermoforming/Vacuum Forming • Assemblies • Packaging • Fabricating - Plastic

Experts in custom heavy gauge thermoforming, including both pressure forming & vacuum forming. Forming capabilities up to 10' x 18' with 6 axis robotic trimming. Preferred supplier to the medical, electronics, telecommunications, automotive, recreational vehicle, green energy and pool & spa markets. In-house painting and contract manufacturing.

Quality Certifications: ISO 9001:2015 • UL LISTED
Service Categories: Rapid Prototyping • Castings - Rubber Mold • Machining - CNC Milling & Turning

We specialize in 3D solid modeling, stereolithography, prototype tooling, DNC/CNC machining, and multi-jet manufacturing. Check out our new resins & SLS capabilities.

Quality Certifications: ISO 9001:2008
Service Categories: Laser Cutting • Laser Marking • Waterjet Cutting - Metal • EDM • Fabricating - Steel

Laser and waterjet job shop with both 2D and 3D capabilities. We have multiple machines for fast turn-around and operate 24 hours a day during the week. 5 Axis laser for trimming stamped, hydroformed, or metal spun parts. IPG Fiber Laser Cube is used for cutting small previously stamped parts, high accuracy parts, and copper, silver, and titanium parts. Tube cutting.

SMALLEY     Booth # 123
Service Categories: Snap Rings & Retaining Rings • Springs - Coil • Springs - Wave • Springs - Flat • Fasteners

We are the exclusive manufacturer of the industry-leading Spirolox® Retaining Rings, an innovative design that features a no gap, 360° retaining surface without protruding ears to interfere with mating components. We are also the originator of Crest to Crest® Wave Springs which save up to 50% of space compared to conventional coil springs.

Quality Certifications: ISO 9001 & ISO 13485 • IATF 16949 • AS 9100 • ISO 14001
Service Categories: CAD Design Services

We provide critical engineering resources for rapid product development and manufacturing ramp up. SoloPoint Solutions has provided design services for companies within the Medical Device, Biotechnology, and Aerospace industries.

TECH-ETCH INC.     Booth # 112
Service Categories: Chemical Milling • Photochemical Etching & Machining • Shielding - EMI/RFI • Circuits - Flexible • Assemblies - Circuits

Photoetching services featuring specialty materials: tungsten, titanium, polyimide, elgiloy, molybdenum & nitinol. Flexible circuits manufacturer featuring fine line technology, microvias & SMT Assembly. EMI/RFI shielding products manufacturer specializing in beryllium copper spring fingers, conductive fabric gaskets & knitted wire mesh.

Quality Certifications: ISO 9001:2008 • AS 9100 REV C
Service Categories: Stampings - Progressive Die • Stampings - High Volume • Tooling • EDM • Machining

Founded in 1975 by Harri & Helga Kutzmarski, German immigrants who arrived in America in 1961. Harri was trained as a machine builder in Germany & used his skills to quickly ascend as a master Tool & Die Maker, and along with his NTMA trained sons began his own business. Now three generations of unsurpassed talent & quality designing, building & operating complex tight tolerance precision stamping dies.

Quality Certifications: ISO 9001:2008 CERTIFIED
TRANS-MATIC     Booth # 425
Service Categories: Stampings - Deep Drawn Shells • Stampings - Ferrous & Non Ferrous • Stampings - High Volume • Assemblies • Stampings - Progressive Die

A privately held, family owned and operated business with headquarters in Holland, MI. Founded in 1968 by Patrick Thompson, we have become a global leading supplier of small, deep drawn metal components; from the internal components in your door lock hardware, to parts that help your braking systems function correctly.

Quality Certifications: ISO 9001:2008 • ISO 14001:2004 • ISO 16949-2009
Service Categories: 3D Printing • Rapid Prototyping • Rapid Prototyping - Equipment

Ultimaker and MatterHackers share the vision to make 3D printing accessible to all. It is why all of our desktop printers are extremely quiet, fast, accurate, reliable and effortless to use, embraced by professionals and novices alike. Ultimaker is one of the most successful and reliable open source 3D printing companies in the world.

Service Categories: Plastics - Injection Molding • Plastics - Painting • Plastic Coatings - EMI/RFI • Assemblies • Molds & Moldmaking - Plastic

We have a world-class facility and are one of the largest injection molding manufacturers on the West Coast. 50 years experience - custom large part injection molding - 37 injection molding machines 200-2000 tons - ISO/TS 16949 compliant - ISO 9001:2008 registered - ESD Assembly - Product Assembly - Painting / Shielding - 3PL - Kanban Fulfillment - Mold / Part Design.

Quality Certifications: ISO 9001:2008 • FDA REGISTERED • UL REGISTERED
WILL-MANN INC.     Booth # 223
Service Categories: Fabricating - Sheet Metal • Laser Cutting • Metal Cabinets & Enclosures • Welding & Weldments • Assemblies - Electromechanical

We are a full service sheet metal fabrication shop with state-of-the-art equipment. Prototype to production. We offer CNC punching, laser cutting, CNC bending, CNC forming, CNC machining, drilling & tapping, certified MIG/TIG welding, robotic welding, spot welding, assembly, engineering assistance & support.

Quality Certifications: ISO 9001:2008 • AS 9100C
3-D PRECISION MACHINE     Booth # 210
Service Categories: Machining - CNC Milling & Turning • Machining - Production • Engineering & Technical Services • Inspection Services • Cleaning - Ultrasonic

ISO/AS9100 REV C Certified machine shop that fabricates components of all material types meeting MIL Spec & other customer requirements with the added value of engineering services.

Quality Certifications: ISO 9001:2008 • AS 9100 REV C
3DEO INC.     Booth # 419
Service Categories: 3D Printing • Fabricating - Stainless Steel

Our breakthrough Intelligent Layering® metal 3D printing technology allows 3DEO to unlock high volume additive manufacturing by drastically reducing final part cost. Despite the low cost, our parts meet the high industry benchmark MPIF Standard 35 while still achieving tight tolerances and the best surface finish in metal 3D printing.

A. J. METAL MFG.     Booth # 338
Service Categories: Springs - Coil • Stampings - Metal • Tube Bending & Fabricating • Welding - Robotic • Assemblies

In the business of manufacturing Wire Forms, Compression, Extension, Torsion Springs, Metal Stampings, Tube Bending, Welding and Assembly for over 37 years.

Quality Certifications: ISO 9001:2008
A.L. JOHNSON CO.     Booth # 243
Service Categories: Castings - Aluminum • Prototypes - Rapid Casting • Castings - Zinc

Rubber Plaster Mold (RPM) process. Thin wall, fine surface, no draft, close tolerance, quick delivery, inexpensive, permanent tooling. Production quantities from prototype tooling. Complete machining and finishing. Castings - plaster mold & rubber mold.

Quality Certifications: AS 9100 • ISO 9001
Service Categories: Fasteners • Electronic Hardware • Industrial Supplies • Shielding - EMI/RFI • Gaskets, Seals, Washers & O-rings

A worldwide Master Stocking Distributor for AVK, BIVAR, HEYCO, FEDERAL-MOGUL, GENERAL CABLE, KEYSTONE, PANDUIT, PIC DESIGN, RAF, RICHCO, SHAKEPROOF, SUMITOMO, 3M, ZIERICK, and many other name-brand fastener and electromechanical component manufacturers, and is among the leaders in engineered specialty fasteners.

Quality Certifications: ISO 9001:2015
Service Categories: Powder Coating • Metal Finishing - Painting • Masking • Assemblies • Assemblies - Mechanical

A full service production facility that specializes in high-quality metal finishing services including: powder coating, Cerakote, ion-phosphate cleaning & sand-blasting and mechanical assemblies and box builds.

Quality Certifications: ISO 9001: 2008 CERTIFIED
Service Categories: 3D Printing • Machining - CNC Milling & Turning • Tooling - Rapid Injection Molding • Prototypes - Rapid Sheet Metal • Rubber - Compression Molding

Established in 2009, we offer metal & plastic 3D Printing, and traditional manufacturing. ITAR-certified services include: SLA, CNC, SLS, FDM, DMLS, Polyjet, Urethane & Metal Castings, Laser Cutting, & Production Tooling & Molding. We have over 20 years of additive and traditional manufacturing experience, and provide outstanding customer service.

Quality Certifications: ITAR CERTIFIED
ALLMOTION INC.     Booth # 309
Service Categories: Motion Control • Motors & Drives • Heat Sinks

Manufactures Stepper Drives, Stepper Controllers, Servo Drives and Servo Controllers. The most compact Intelligent Stepper Motor Drives and Stepper Motor Controllers on the market today. Our Servo Motor Controllers and Brushless DC Motor Controllers feature quadrature encoder feedback and are also programmable to allow stand-alone operation.

Service Categories: Springs - Coil • Springs - Flat • Springs - Wave • Assemblies • Stampings - Fourslide

Custom manufacturer of springs, wire forms and formed metal products. Our customers are in the automotive, firearm, knife, sporting goods, electronic, medical, dental and motorcycle suspension products industries, worldwide. We work with our customers from design and prototyping to supplier managed inventory programs.

Quality Certifications: ISO 9001:2015 • IATF 16949:2016
Service Categories: Fabricating - Sheet Metal • Laser Cutting • Welding & Weldments • Waterjet Cutting - Metal

Contract Fabrication. Sheet Metal processes, specializing in serving Southern California businesses. We pride ourselves in long-term relationships with customers, providing Laser Cutting, Turret Cutting, Forming, Pemming, TIG/MIG Spot Welding, batch Powder Coating, and Assembly. Free Delivery within San Diego. CRS, SS, EG, Gal, Copper, Brass, Titanium.

AQS INC.     Booth # 110
Service Categories: Assemblies - Turnkey • Assemblies - Printed Circuit Boards • Assemblies - Electrical • Assemblies - Electromechanical • Optical Components

EMS Provider with capability to support from early design to market in shortest time frame at very low cost solution. Full support of PCBA & box build from NPI to mass production. ITAR Compliant.

Quality Certifications: IPC610B • ISO 9001 • TUV / UL LISTED • ISO 13485
ARGO SPRING MFG. CO. INC.     Booth # 111
Service Categories: Springs - Coil • Springs - Flat • Wire Forming & Fabricating • Stampings - Fourslide • Stampings - Metal

Manufactures CNC Coil springs, Flat springs, CNC wire forms, Metal Stampings, Fourslide products, assemblies (welding, staking, riveting etc.), washers (Belleville and curved) to blue print or specifications. AS9100 Certified.

Quality Certifications: ISO 9001:2015 • AS 9100D • DD 2345 • Sabre Approved
Service Categories: Castings - Plaster Mold • Castings - Graphite Mold • Machining - Castings • Plastics - Reaction Injection Molding • Prototypes - Rapid Casting

An industry leader in providing prototype/short run machined aluminum castings, & Reaction Injection Molded parts for over 50 years. Full in-house capability including: DFM support, Tooling, Foundry (Plaster, Precision Airset Sand, One Shot Tool-less, Graphite Die), RIM Molding, CNC Machining, Paint & Finishes.

Quality Certifications: ISO 9001:2008 • AS 9100 REV C • ITAR
Service Categories: Prototypes - Fabrication • 3D Printing • Vacuum Metallizing • Molds & Moldmaking - Plastic • Machining - Conventional CNC

We are one of the world´s largest Product Development specialists offering Rapid Prototyping, 3D Printing, Injection Molding and Tooling Services. With over 66 years of experience in product development, ARRK combines the most innovative technologies with master craftsmanship to bring your products to market faster.

Quality Certifications: ISO 9001: 2008 CERTIFIED • ITAR CERTIFIED
Service Categories: Castings - Permanent Mold • Castings - Aluminum • Castings - Zinc

Aluminum & zinc castings, engineering assistance, in-house tooling, machining & assembly. Castings from a few ounces to 80 lbs. Quantities from 500 to 150,000.

Quality Certifications: ISO 9001:2008
BISCO INDUSTRIES     Booth # 345
Service Categories: Fasteners • Electronic Components • Electronic Hardware • Assembly Hardware • Bearings

We are a premier distributor of Electronic Components and Fasteners used for production in Aerospace, Communication, Computer, Fabrication, Industrial Equipment, Instrumentation, Marine and Military Industries. We strive to be our customers' sole supplier of electronic components and fasteners by being a local presence and providing exceptional service.

Quality Certifications: AS 9100 • ISO 9001:2008 • BOEING APPROVED • LOCKHEED MARTIN
Service Categories: Stampings - Metal • Stampings - Progressive Die • Stampings - Deep Drawn Shells

Complete die design to precision metal stampings and assemblies, welding robotic & welding resistance. Single hit press line. Short run & high volume stampings. In-House tooling.

Quality Certifications: ISO 9001:2015 WITH DESIGN
Service Categories: Cable & Wire Manufacturing • Assemblies - Cable • Assemblies - Electrical • Assemblies - Electromechanical • Wire & Cable Harnesses

Custom cable assemblies & wire harnesses. CableConn specializes in high mix, low to medium volume assemblies. Coax (VSWR, IL, & Phase Match), Mil Circular, Micro-D, Molding, High Density, RJ45, Signal & Power crimp & poke. Assemblers are IPC-A-620 Class 3 & J-STD-001 Soldering Class 3 Certified. AS9100 Certified, Reach Compliant, ITAR Registered, Woman Owned Small Business.

Quality Certifications: AS9100/ISO 9001:2000 • J-STD-001 • IPC CLASS 3
Service Categories: Certification Services • Consulting - Manufacturing • Manufacturing Association • Safety Certifications

Offering services that help manufacturers improve productivity & profitability throughout California. ALSO OFFERING a no-cost program for California manufacturers, job shops, and assemblers with less than $10M annual sales. The California Manufacturers Accelerator Program provides business & manufacturing support at no cost to you. Call for more information.

Service Categories: Manufacturing Association • Assemblies • Packaging • Assemblies - Turnkey • Wire & Cable Harnesses

The Joint Venture Program (JVP) provides vocational training opportunities to offenders within California’s correctional settings and it offers businesses attractive benefits for employing them. Your profit. Their opportunities. Our commitment.

CAPLUGS      Booth # 313
Service Categories: Plastics - Injection Molding • Plastics - Extruded Profiles • Die-Cutting • Tooling

A worldwide leader in product protection for over 70 years. We specialize in six different molding processes allowing us to offer a variety of design and material options. Our catalog highlights 15,000+ parts in stock and ready to ship. If a part doesn't meet your requirements, our team of engineers will work with you to design exactly what is needed.

Quality Certifications: ISO 9001 • IATF 16949 • ISO 13485 • ISO 14001
Service Categories: Labels, Tapes & Decals • Die-Cutting • Nameplates, Dials & Panels • Switches - Membrane • Rubber - Compression Molding

Manufactures pressure sensitive labels, RFID tags and custom die cut components - overlays, nameplates, insulators, gauges, EMI/RFI shielding, gaskets, shims spacers, shock absorbers, LRF components, tamper-evident security seals & others. Cellotape's print processes include screen, thermal transfer, hot stamp, digital, flexography, RFID & Near Field Communications converter.

Quality Certifications: UL CERTIFIED • ISO 9001:2015 • RoHS
CENTURY SPRING CORP.     Booth # 218
Service Categories: Springs - Coil • Stampings - Fourslide • Wire Forming & Fabricating • Springs - Flat • Springs - Wave

A MW Industries location, is the go-to source for Made in USA stock and custom springs, for any OEM or MRO application. Same day shipments from over 35,000 stock designs - compression, extension, torsion, tapered, disc, urethane and die springs. Century also specializes in custom springs. Inquire at FREE CATALOG upon request.

Quality Certifications: ISO 9001:2008
Service Categories: Stampings - Deep Drawn Shells • Stampings - Short Run • Stampings - Metal • Stampings - Ferrous & Non Ferrous • EDM

Deep drawing specialist in a wide range of metals based on customers' supplied drawings. All required tooling is built and tested on site. We supply small to medium production runs to the high voltage power & X-ray tube manufacturers; as well as components for aerospace and other industries.

Quality Certifications: AS 9100D • ISO 9001:2015 • ITAR REGISTERED
COOLING SOURCE     Booth # 412
Service Categories: Machining • Engineering & Technical Services • Extrusions - Aluminum • Prototypes - Machining • Plastics - Injection Molding

A heatsink manufacturer offering the most comprehensive value-added standardized or custom heatsink solutions for today's global market. Using the very latest technology available to heatsink manufacturers, we offer a wide range of products for our global market clients.

Quality Certifications: ISO 9001:2015 • ITAR
COX MFG. CO.     Booth # 213
Service Categories: Screw Machining - Swiss/CNC Swiss • Machining - Precision CNC • Machining - Multi Axis • Screw Machining - Multi Spindle • Machining - CNC Milling & Turning

Custom screw machine products in volume for the auto/trucking, medical, firearms, geophysical, aero/defense industries and more. We expertly operate CNC, Swiss, multi-axis, and multi-spindle machines to name a few. Parts range from miniature to 2.75" diameter, with a wide diversity of materials, delivered reliably.

Quality Certifications: ISO 9001:2015 • ITAR REGISTERED
C-PAK INDUSTRIES INC.     Booth # 321
Service Categories: Plastics - Rotational Molding • Molds & Moldmaking - Plastic

Rotational molding and assembly of products with complex & varied shapes, producing seamless hollow plastic parts of exceptional strength and durability, as well as rotational molds & associated tooling.

Service Categories: Metal Finishing - Painting • Plastics - Painting • Shielding - EMI/RFI • Powder Coating • Pad Printing

Contract production painting (Metal/Plastics) - Powder, Liquid, CARC, Teflon, and EMI/RFI Shielding. Chemical pre-treatment including RoHS Chromate, Blasting, Pad Printing, Silk-Screening, Mask Making, High-Bake capability and Blister Packaging.

Quality Certifications: ISO 9001:2015 • CONTROL PLANS • FEMA • FLOW CHARTS - SPC
Service Categories: Stampings - Short Run • Fabricating - Sheet Metal • Laser Cutting • Prototypes - Rapid Sheet Metal • Prototypes - Stamping

Custom metal stamping & sheet metal fabrication using LOW COST tooling of our own unique design. Economical for production runs of 50 to 50,000. We also offer rapid prototype, laser cutting & machining. Email us for a quote at

Quality Certifications: ISO 9001
DA/PRO RUBBER INC.     Booth # 133
Service Categories: Rubber Molding • Plastics - Injection Molding • Silicone / Rubber - Liquid Injection Molding • Rubber To Metal Bonding • Rubber - Compression Molding

5 facilities for compression/injection molding - high-quality custom rubber, TPE, & plastic components molded to precision tolerances such as diaphragms, seals, connectors, molded shapes, rubber to metal parts for medical device, electronic & aerospace industries. Class 10,000 cleanroom - chemists & engineers assist in optimal moldability.

Quality Certifications: ISO 9001
Service Categories: Inspection Services • Quality Systems • Testing - Mechanical Standards • Testing - Environmental

We are a thrid party certification and verification company that validates manufacturing standards for U.S. based clients. These standards include ISO 9001, 14001, 50001, 13485, AS 9100, IAT 16949, OHSAS 18001 and many others. DEKRA also provides Assessment Services.

Quality Certifications: ISO 9001:2015, AS 9100 • IATF 16949 • ISO 14001:2015 • ISO 13485, ISO 50001
DESIGN-2-PART MEDIA     Booth # 000
Service Categories: Publications

Published since 1984, Design-2-Part Magazine is one of the country's oldest publications specifically devoted to showcasing manufacturing companies who specialize in helping OEM's take their product from design to part.

Service Categories: Machining - Precision CNC • Machining - CNC Milling & Turning • Machining - Production • Machining - Multi Axis • EDM

A precision contract manufacturer located in Santa Clara, CA. Core competencies include precision machined and assembled components for Medical, Aerospace, Defense, and other markets; helping customers with R&D/engineering support, wire & sinker EDM, supply-chain management, and DFM. Dedicated Program Managers and VOC/HOC processes deliver best-in-class customer service.

Quality Certifications: ISO 9001 • ISO 13485 • AS 9100:C • ITAR
Service Categories: Shielding - EMI/RFI • Gaskets, Seals, Washers & O-rings • Testing - EMI/RFI • Fabricating - Felt, Cork & Rubber

Manufacturing & distributing EMI/RFI materials, EMI Gaskets, gasket materials, and die-cutting materials for nearly a decade; and the professional experience of our outstanding staff extends beyond twenty years. East Coast Shielding is based in New Jersey and has clients and customers located throughout the United States, and around the world.

EMKA INC.     Booth # 301
Service Categories: Assembly Hardware • Electronic Hardware • Hinges • Extrusions - Rubber • Gaskets, Seals, Washers & O-rings

A leading manufacturer of enclosure hardware. Products include handles, hinges, locks, latches, gasketing and accessories.

Quality Certifications: ISO 9001 • ISO 14001 • RoHS • UL APPROVED
ENPLAS AMERICA INC.     Booth # 404
Service Categories: Plastics - Injection Molding • Engineering & Technical Services • Prototypes - Plastic • Semiconductors • Optics - Precision

Providing medium to high precision custom plastic injection molding and engineering services with a focus on Medical Devices and Life Science solutions.

Quality Certifications: ISO 9001 • TS 16949
Service Categories: Machining - CNC Milling & Turning • Laser Engraving • EDM - Wire • Assemblies • Engineering & Technical Services

A precision manufacturing facility located in Boise, Idaho. Since 1993 we have been serving the entire United States with outstanding machining standards and practices. We are proud of our quality, reasonable pricing, and JIT delivery. Turnaround time is extremely important to us. If you have one part or a thousand parts, we specialize in taking care of your machining needs.

Quality Certifications: ITAR • ISO 9001:2015
EPILOG LASER     Booth # 247
Service Categories: Lasers • Laser Cutting • Laser Engraving • Laser Marking • Bar Coding

An industry leader in design of laser engraving, cutting & marking systems, manufacturers of the Epilog Zing, Mini, Helix, Fusion Pro, FiberMark, and G2 Galvo series of laser systems.

Quality Certifications: ANSI STANDARDS • IEC • CE • CFR 21
FABCOR     Booth # 319
Service Categories: Fabricating - Sheet Metal • Machining - CNC Milling & Turning • Laser Cutting • Metal Cabinets & Enclosures • Electronic Enclosures

Full service precision sheet metal & machine shop using state-of-the-art metal fabrication & engineering methods. We can design your parts to: maximize yields, optimize function & lower production costs. Mitsubishi 4000 Watt CO2, Laser, CNC punching, forming/rolling, shearing, drilling/tapping, Mig/Tig welding, Spot welding, assembly and JIT/KanBan. Woman owned small business.

Quality Certifications: ISO 9001:2015
FORECAST 3D     Booth # 329
Service Categories: 3D Printing • Rapid Prototyping • Prototypes - Rapid Casting • Castings - Rubber Mold • Tooling - Models & Prototypes

Industrial 3D Printing, Short-Run Manufacturing, & High Volume Production Services for Prototype & Production. Capabilities: HP's Multi Jet Fusion (MJF), Fused Deposition Modeling (FDM), Direct Metal Laser Sintering (DMLS), Stereolithography (SLA), PolyJet, CNC Machining, & RTV Urethane Casting. Customer Focused, Quality Driven since 1994.

Quality Certifications: ITAR REGISTERED • ISO 9001:2015 • AS 9100D
Service Categories: Assemblies - Cable • Assemblies - Electrical • Assemblies - Electronic

Specializes in cable and wire identification and protection. Gamma Electronics sells shrink tube printers, heat shrink tubing and other cable related products. These include cable tie labels, in house shrink tube label production and non-shrinkable tubes.

Quality Certifications: RoHS / UL CERTIFIED
GARDNER SPRING INC.     Booth # 411
Service Categories: Springs - Coil • Springs - Wave • Fasteners

A woman-owned manufacturer of stock and custom springs and spring washers, including compression, extension, torsion, constant force, conical compression, cot extension, ball bearing, Belleville, curved, finger, wave and specialty springs. US made since 1907. Retail assortments and engineering kits are also available.

GASSER & SONS INC.     Booth # 124
Service Categories: Stampings - Deep Drawn Shells • Machining - CNC Milling & Turning • Stampings - Metal • Stampings - Progressive Die • Machining - Precision CNC

Since 1916 Gasser continues to Provide: Precision Deep Drawn Components, Secondary Machining, A Vast Tooling Library, Custom Formed Lead Lining for Housings and Assemblies, Design Engineering Services, Production Quantity Runs and Quality...with Confidence.

Quality Certifications: ISO 9001 • ITAR REGISTERED
Service Categories: Castings - Aluminum • Castings - Plaster Mold • Castings - Sand & Shell • Castings - Permanent Mold • Castings - Investment

We are the only foundry offering 5 complementary casting processes, in-house patternmaking, machining, surface finishing, and inspection - a true best in class turnkey solution. Thin/thick walled, smooth surface, class A finishes, oz. to 500 lbs., design for manufacturing, breaking design rules with complex parts.

Quality Certifications: ISO 9001:2015 • ITAR REGISTERED
GOPROTO INC.     Booth # 207
Service Categories: 3D Printing • Machining • Tooling - Plastic Injection Molding • Tooling - Casting • Prototypes - Models

Delivering turnkey plastic and metal part manufacturing solutions including industrial design model making, rapid prototyping, additive manufacturing, cast urethane, CNC machining, rapid sheet metal, rapid injection tooling, production parts (injection molding, stamping, die-cast, sheet metal), and part finishing to complete your product.

Quality Certifications: ISO 9001
GPC ELECTRONICS     Booth # 125
Service Categories: Assemblies - Electronic • Assemblies - Turnkey • Wire & Cable Harnesses • Surface Mount Technology - Assembly • Assemblies - Printed Circuit Boards

Since our inception in 1985, we've had a track record of working with leading OEMs in North America, Europe, Asia & the Pacific. We are able to customize processes, delivering unique solutions to our customers, providing them with a competitive advantage & positive outcomes. We are a full service EMS and cable harness provider with four manufacturing sites globally.

Quality Certifications: ISO 9001:2015 • ISO 14001:2015 • ISO 13485:2016 • IATF 16949:2016
HBM SUPPLY     Booth # 346
Service Categories: Adhesive Coating Services • Adhesives • Converters • Die-Cutting • Fabricating - Foam

A converter and distributor of specialty tape and adhesives. Specializing in precision slitting, die-cutting, laminating, rewind slitting, extended liner, printing, double liner, spooling, and perforating.

Service Categories: Prototypes - Machining • Machining - Aluminum • Machining - Precision CNC • Machining - CNC Milling & Turning • Machining - Robotic

Specializes in prototypes, custom CNC machining, short run productions, and quick turnaround products. Rapid prototyping of precision machining is our specialty.

Service Categories: Castings - Die, Aluminum • Castings - Die, Zinc • Machining - CNC Milling & Turning • Powder Coating • Assemblies - Mechanical

Produces high-pressure aluminum and zinc castings up to 80 lbs. We also offer complete die cast tool design and fabrication, secondary CNC machining, powder coating, hardware assembly and kitting. We are ISO 9001:2008 and AS9100 Rev D certified. We have extensive experience in the aerospace, medical, electronics and gaming industries.

Quality Certifications: ISO 9001:2015 • AS 9100 REV D • BOEING APPROVED • HONEYWELL APPROVED
Service Categories: Nameplates, Dials & Panels • Labels, Tapes & Decals • Insulators • Screen Printing • Adhesives

A provider of Lexan Overlays, Nameplates, Warning Labels, Decals, Control Panels, Front Panels, Metalphoto Aluminum Plates, Engraved Aluminum Plates, Die Cut Insulators, Electroluminescent Lamps & other screen and digitally printed products.

Quality Certifications: ISO 9001:2015 • UL APPROVED • RoHS
INSACO INC.     Booth # 109
Service Categories: Grinding - Ceramics • Machining - Ceramics • Grinding - Glass • Ceramic Parts • Optical Polishing

Precision fabricator of ultra hard materials, utilizing advanced ceramic materials including sapphire, ceramics from all producers, glass, quartz, & many others. Machining to very precise dimension & tolerances in a variety of shapes & configurations as required. No standard parts/all mfg. to specific customer requirements. Prototype to production. No metals or plastics.

Service Categories: Machining • Machining - CNC Milling & Turning • Special Machinery - Design, Build & Rebuild • Prototypes - Machining • Extrusions - Plastic

Specializes in custom machine builds and quick turnaround short run machining. IPE Manufacturing's interdisciplinary engineering team has specialties in mechanical, electrical and chemical engineering to assist you with machine builds & part design to minimize costs & decrease time to market.

Quality Certifications: ISO 9001:2015
K & D CO. LLC     Booth # 427
Service Categories: Welding & Weldments • Welding - Robotic • Testing - Non-Destructive

Supplier of Electron Beam Welding service and helium leak testing. Serving the needs of aerospace, aviation MRO, the oil & gas industry and the medical device field. Electron beam welding produces a very narrow heat affected zone and can penetrate as much as 5" deep. Minimal heat input reduces distortion. It is done in a vacuum so the welds have exceptional purity.

Quality Certifications: NADCAP CERTIFIED FOR WELDING • AS 9100 • NADCAP • ISO 9100 REV B
KAL PLASTICS     Booth # 225
Service Categories: Plastics - Thermoforming/Vacuum Forming • Plastics - Low Volume • Die-Cutting • Fabricating - Plastic • Material Handling

Specializing in heavy gauge cut-sheet thermoforming. Huge capacity in terms of facility, equipment & max part size. OEM partners in all major end markets, 5-axis CNC trimming, 100% woman owned.

Quality Certifications: ISO 9001:2008
KORMACHINE     Booth # 429
Service Categories: Machining - CNC Milling & Turning • Machining - Precision CNC • Machining - Stainless Steel • Machining - Multi Axis • Machining - Castings

Prototypes and production manufactures complex machine milled and turned parts and assemblies for our clients principally in the Aerospace, Aircraft, Oil and Gas, Food and Beverage, Railroad, Construction, Defense, and Consumer Products Industries.

Quality Certifications: AS 9100D, ISO 9001:2015 • JCP • CAGE CODE • ITAR
LEE SPRING     Booth # 221
Service Categories: Springs - Coil • Springs - Flat • Springs - Wave • Stampings - Fourslide

Springs in stock ready to ship or made to your specifications. Large selection of stock Compression, Extension, Torsion, HEFTY™ Die, REDUX™ Wave, LeeP™ Plastic Composite, MIL-SPEC, Belleville Washer, Battery and Constant Force Springs. Custom Springs, Stampings, Wire Forms and Fourslide design and manufacturing. Prototypes through large production runs.

Quality Certifications: ISO 9001 • RoHS / REACH • MIL SPEC AS24585 • MIL SPEC AS24586
M & F GAUGE AND SPECIALTY CO. INC.     Booth # 334
Service Categories: Machining - CNC Milling & Turning • Assemblies - Turnkey

Metal Machining, Punch Press, General Assembly.

Quality Certifications: ISO 9001:2015
MAZONTECH LLC     Booth # 440
Service Categories: Machining - Production • Screw Machining - Swiss/CNC Swiss • Assemblies - Electromechanical • Machining - Miniature Precision • Machining - Multi Axis

Precision custom manufacturing, assembly and supply chain consolidation of parts, devices and components. We consolidate build-to-print of small mechanic parts and assemblies. Specialized in-house high precision machining services of turned and milled micro-parts with Swiss automatic machines from ø 0.5 mm (0.02”) to ø 16 mm (0.63”).

Quality Certifications: AS 9100 REV C / ISO 9001:2008 • ISO 13485:2016 • SAM REGISTERED • SBA
MERCURY CORP.     Booth # 234
Service Categories: Fabricating - Sheet Metal • Metal Cabinets & Enclosures • Assemblies - Turnkey • Fabricating - Aluminum • Fabricating - Stainless Steel

AN INTEGRATED SOLUTION TO YOUR SUPPLY CHAIN - we build custom racks, frames, enclosures, plastics & stamping assemblies. CORE PROCESSES: Design, Metal Fabrication, welding of all types of metals, Plastic Injection Molding, Finishing, Turn-Key Assemblies & KAN BAN.

Quality Certifications: ISO 9001:2008 • ISO 13485 • AS 9100 • ITAR REGISTERED
Service Categories: Fabricating - Foam • Foam Conversion • Die-Cutting • Waterjet Cutting - Non-Metal • Packaging

Foam fabricator & distributor of open & closed cell foam, sponge rubbers, and silicones in the automotive, appliance, electrical, HVAC filtration, medical & industrial markets. Capabilities: sheeting, slitting, adhesive lamination, water-jet, rotary die & steel rule die cutting & packaging. Products: Gaskets/Seals, Filters, Sound dampening, Pads, Cushions & Packaging.

Quality Certifications: ISO 9001:2015
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Plastics - Insert Injection Molding • Tooling - Plastic Injection Molding

An ISO 13485 and ISO 9000 registered company, MIssion Plastics specializes in custom injection molding of medical device components. Precision manufacturing with scientific molding practices encompasses horizontal, vertical and insert molding. Comprehensive tool room capabilities include mold design, tool construction, tool repair and preventive maintenance.

Service Categories: Machining - Precision CNC • Machining - Production • Assemblies - Mechanical

Moseys provides precision, production manufacturing services to OEMs of global organizations. We produce a high mix of critical components in Medical, Aerospace, Hydraulics/Pneumatics, Oil & Gas, Semiconductor and more. Moseys is ITAR registered and AS9100 Rev. D and ISO 9001:2015 Certified. For questions, please email

Quality Certifications: AS 9100 REV D • ITAR • US/Canada JCP Certified • ISO 9001:2015
Service Categories: Motion Control • Controls - Industrial & Machine Tool • Instrumentation & Controls • Machining - CNC Milling & Turning • Machining - Conventional CNC

We have created a powerful CNC control with our own proprietary software. We sell CNC control retrofit kits and offer our retrofitting services; our control works with nearly any CNC machine. The system is state-of-the-art with a solid-state industrial computer, integrated motion control card, as well as our own user-friendly CNC software. Check us out at

Service Categories: Stampings - Short Run • Stampings - Metal • Stampings - Ferrous & Non Ferrous

We are a custom, short run metal stamping facility specializing in low cost, lifetime guaranteed tooling on production runs of 50 pieces to 50,000 pieces per order. We have been an innovator in the short run metal stamping industry for over 35 years. We are ISO 9001:2008 & RoHS Compliant.

Service Categories: Cable & Wire Manufacturing • Wire & Cable Harnesses • Internet Services

Full service custom manufacturing of wire and cable products. Short runs, fast turn times, high quality, reasonable pricing. All products Manufactured In USA. We have 65 years experience in military, robotics, medical, geophysical, aerospace, architectural and controls. Employee owned ESOP company.

Quality Certifications: MIL-I-45208A • UL APPROVED • UL RECOGNIZED • CSA APPROVED
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Plastics - Elastomeric Overmolding

We offer in-house design, mold making, and full service injection molding. The company is product-development oriented. Eleven presses range from 30-500 tons. All engineering resins. Key markets: electronics, biomedical, & consumer products. Founded in 1980, Pacific Plastics relocated to a 20,000 sq.ft. facility in Vista, CA.

Quality Certifications: ISO 9001:2015
Service Categories: Assemblies - Turnkey • Machining - CNC Milling & Turning • Fabricating - Sheet Metal • Systems Integration • Special Machinery - Design, Build & Rebuild

A Vertically Integrated Contract Manufacturer with four major divisions: CNC Machining: 85 turning & milling CNC machines; the largest is 106" x 161" x 42", Sheet Metal/Stamping with state-of-the-art equipment including robotic welding. Assembly Division: Assembly & test of top level OEM product/equipment. Systems Division: Design & build automated test & assembly equipment.

Quality Certifications: ISO 9001:2000 • ISO 13485 • AS 9100 • TUV / UL CERTIFIED
PENCO PRECISION INC.     Booth # 347
Service Categories: Machining - Production • Machining - Precision CNC • Machining - CNC Milling & Turning • Machining - Aluminum • Machining - Stainless Steel

We work with all industries including aerospace, computer, medical and high end commercial. Short to medium run lots and we also machine castings. Small to medium size parts. Maximum work piece: milling, 24" X 40" X 28"; turning, 11" X 32". 5,000 shop hours/month. 100% Woman Owned and Operated.

Quality Certifications: ISO 9001:2008 • AS9100C • ITAR REGISTERED • WBE
Service Categories: Adhesives • Gaskets, Seals, Washers & O-rings • Potting & Encapsulation • Surface Treatment • Coatings - Conformal

Quality certified manufacturer of adhesives & sealants. Product lines include anaerobic, cyanoacrylate, epoxy, structural acrylic, UV/visible, modified epoxy, MS polymer and polyurethane.

Quality Certifications: ISO 9001:2015
Service Categories: Stampings - Fineblanked • Grinding - Creep Feed • Machining - Precision CNC • Grinding - I.D. & O.D. • Grinding - Double Disc

Complete precision metal part manufacturing service, offering fineblanking, CNC milling & turning, lapping, EDM, honing and grinding. Grinding includes double disc, blanchard, surface, cylindrical, centerless and creepfeed.

Quality Certifications: MIL-45208 • MIL-STD-105-E
PFI INC.     Booth # 342
Service Categories: Plastics - Injection Molding • Assemblies • Machining

Plastic injection molding company specializing in small parts and small volumes. We have assembly, packaging, shipping capabilities. Part and tool design and fabrication.

Service Categories: Coatings - Conformal • Coatings - Physical Vapor Deposition • Potting & Encapsulation • Electronic Encapsulations • Engineering & Technical Services

The premier service provider for Conformal Coating, Potting, Encapsulating, Plasma Etchback/Desmear, Laboratory Services & BGA underfill, ESS testing, and ultrasonic cleaning. Our Northern and Southern California divisions provide rapid response, technical excellence and a problem-solving, “can-do” staff of professionals. From concept to integration, we are your solutions resource. RoHS Compliant.

Quality Certifications: AS 9100 • ISO 9001-2000 • ITAR • IPC
Service Categories: Coatings - Thermal Spray/Plasma/HVOF • Coatings - Physical Vapor Deposition • Coatings - Titanium Nitride • Grinding • Machining

A recognized leader in Thermal Coatings. Over 350 different coatings & thin film coatings. 2 locations: Torrance, CA & S. Windsor, CT. Setup with 24 fully operational spray booths. Supplier to OEM’s in all market segments. Modern metallurgical labs. Experienced engineers to take you from concept to finished part. Using the latest in advanced coating technologies.

PRE PLASTICS     Booth # 438
Service Categories: Plastics - Injection Molding • Tooling - Plastic Injection Molding • Assemblies • Molds & Moldmaking - Plastic • 3D Printing

We are proud to celebrate 32 years of innovation and excellence in plastics. PRe Plastics is known for our ability to tackle difficult design, mold making, and manufacturing challenges. From design and mold tooling, to parts manufacturing and custom assembly, PRe Plastics meets our customers’ needs at a high level of quality with exceptional customer service.

Quality Certifications: ISO 9001: 2008 CERTIFIED • FDA REGISTERED • UL APPROVED
Service Categories: Plastics - Structural Foam • Plastics - Injection Molding • Plastics - Painting • Assemblies - Turnkey • Tooling - Plastic Injection Molding

Full service, turnkey custom structural foam injection molder with in-house mold design, moldmaking, molding, finishing and assembly all under one roof.

Quality Certifications: ISO 9001:2015 • UL CERTIFIED
PRICE MFG. CO. INC.     Booth # 219
Service Categories: Screw Machining - Multi Spindle • Machining - Production • Machining - Aluminum • Machining - Stainless Steel • Machining - CNC Milling & Turning

Producer of precision parts 1/16" to 2-5/8". Materials used: aluminum, stainless, brass, titanium, & other alloys. Industries served: automotive, aerospace, alternative fuels, electronics, communications, medical, mining, recreational vehicles, commercial apppliance & many other applications.

Quality Certifications: ISO 9001:2015
PROFORMANCE MFG. INC.     Booth # 416
Service Categories: Stampings - Deep Drawn Shells • Stampings - Progressive Die • Machining - Conventional CNC • Machining - Precision CNC • Metal Spinning

Manufacturer of precision metal components. Specializing in Metal Spinning, Deep Draw & progressive stamping as well as CNC Dual Spindle/Dual End Parts Machining with live tooling capability. CNC turning & screw machining. Also further specializes in the deep draw & machining or glass sealing & nickel alloys including Kovar, OFHC Copper & Cupronickel.

Quality Certifications: ISO 9001:2008 • LOCKHEED MARTIN / RAYTHEON • A.S.M.E. CERTIFIED • MIL-I-45208A
PROTOLABS     Booth # 317
Service Categories: Rapid Prototyping • Plastics - Injection Molding • 3D Printing • Machining - CNC Milling & Turning • Fabricating - Sheet Metal

We are the world's fastest digital manufacturing source for rapid prototyping and on-demand production. Our technology-enabled company produces custom parts in as fast as 1 day with automated 3D printing, CNC machining, sheet metal fabrication, and injection molding processes.

Quality Certifications: ISO 9001:2015 • ITAR REGISTERED • AS 9100
Q-PLUS LABS     Booth # 306
Service Categories: Inspection Services • Reverse Engineering • Measurement & Inspection • Measurement - Equipment • Calibration & Metrology

ISO 9001 registered & ISO 17025 accredited dimensional measurement & inspection lab, reverse engineering, 3D scanning, and calibration. Services include full automation, non-contact inspection, statistical analysis, contour analysis, surface finish analysis, ct scanning, nano measurement, parts sorting & inspection, & form/roundness testing. Reseller of metrology products.

Quality Certifications: ISO 17025 • ISO 9001 • AS9100D
REDCO     Booth # 214
Service Categories: Rubber Molding • Rubber To Metal Bonding • Rubber Rolls & Rollers • Die-Cutting • Gaskets, Seals, Washers & O-rings

Proudly made in America since 1948. Your complete source for precision rollers, rubber molding, rubber extrusions, die-cutting, foam fabricating & sub component assembly. We are your one stop source. Family owned and operated for 70 years.

Service Categories: Fabricating - Sheet Metal • Assemblies - Mechanical • Metal Cabinets & Enclosures • Prototypes - Rapid Sheet Metal

One-stop source of precision sheet metal & machining for high-tech companies. Production & Prototype. Emphasis on design assistance. Superior finish work with in-house painting & silk screening.

Quality Certifications: ISO 9001:2008
REULAND     Booth # 308
Service Categories: Castings - Aluminum • Castings - Sand • Machining - Large Parts • Machining - Multi Axis

A full spectrum of services for any size casting including: design, pattern, finishing, anodizing, heat treat, inspection and complete CNC machining. We welcome small, medium or large prototype castings and short runs and will gladly work from your pattern, computer files, or existing castings.

Quality Certifications: ISO 9001:2015
REULAND     Booth # 308
Service Categories: Castings - Aluminum • Castings - Sand • Machining - Large Parts • Machining - Multi Axis

A full spectrum of services for any size casting including: design, pattern, finishing, anodizing, heat treat, inspection and complete CNC machining. We welcome small, medium or large prototype castings and short runs and will gladly work from your pattern, computer files, or existing castings.

Quality Certifications: ISO 9001:2015
Service Categories: Plastics - CNC Machining • Assemblies - Mechanical • Rapid Prototyping • Machining - Precision CNC • 3D Printing

Since 1969 we have specialized in Precision Fabrication, CNC Machining, Die Cutting, Rapid Prototyping and Clean Room Assembly of Plastic and Non-Metallic components. Ask about our 5 axis milling capabilities.

Quality Certifications: AS 9100D • ISO 9001:2015 • ISO 13485:2003 • ITAR REGISTERED
RS PRECISION     Booth # 328
Service Categories: EDM - Sinker • EDM - Wire • Grinding - Precision • Machining - Multi Axis

For more than 70 years, we have been satisfying our customers’ most demanding requirements for complex precision machined parts and assemblies. Our new larger CNC milling capabilities enable the production of a broader range of components. Our highly collaborative "beyond the blueprint" approach results in the most advantageous manufacturing solution for your part.

Quality Certifications: AS9100:2016 • ISO 9001:2015 • ITAR
S&H RUBBER     Booth # 341
Service Categories: Rubber Molding • Extrusions - Rubber • Rubber Stampings • Rubber To Metal Bonding

Contract Manufacturer for rubber parts. Molded, Extruded and Stamped rubber parts. We serve aerospace, automotive and many other industries. We work with many types of rubber including; Silicone, EPDM, Neoprene, Buna-Nitrile and Viton. ISO 9001:2015 and AS9100 Rev. D as well as a direct supplier to Boeing, Parker and other OEM Aerospace Companies.

Quality Certifications: ISO 9001:2015 • AS 9100 REV D • BOEING • ITAR
Service Categories: Die-Cutting • Adhesives • Die-Cutting - Felt, Cork & Rubber • Laser Cutting • Gaskets, Seals, Washers & O-rings

Saunders, A Div. of R.S. Hughes Co. has been custom converting thin flexible materials since 1959, tailoring our services and processes to your needs. We convert a wide array of materials from 3M tapes, foams, films, plastics, rubber, hook & loop, labels, and much more with services including die & kiss cutting, slitting, laminating, cut to length, laser cutting and more.

Quality Certifications: ISO 9001:2015 • GASKET FABRICATORS ASSOC.(GFA)
SEAL METHODS INC.     Booth # 237
Service Categories: Die-Cutting • Foam Conversion • Insulators • Assemblies - Turnkey • Extrusions - Rubber

Manufacturer of gaskets, seals, tapes & precision die cuts. Major Raw Material Suppliers include: 3M, Dupont Elastomers, Rogers Corp., Saint Gobain, Gaska, Interface Solutions & many others. We convert your ideas into finished parts. We fabricate custom parts, prototyping available, water-jet cutting, slitting, laminating, die cutting, laser cutting, and bonding.

Quality Certifications: ISO/IATF 16949 • UL & FDA REGISTERED • AAMA
SEALING DEVICES INC.     Booth # 105
Service Categories: Gaskets, Seals, Washers & O-rings • Rubber - Injection Molding • Shielding - EMI/RFI • Die-Cutting • Adhesives

Manufacturer/fabricator of gaskets, O-rings, EMI shielding, adhesives, seals, custom molded rubber, and sponge parts. Also, compression, transfer and injection molding on-site. In-house tooling. Authorized Distributors for Parker Seal, Chomerics, Gore, 3M, Rogers, Garlock, Flexitallic & Loctite. Veteran Owned, Small Business & ITAR registered.

Quality Certifications: AS 9100 REV D • ISO 9001:2015 • MIL-I-45208 • MIL STD 45662
Service Categories: Plastics - Injection Molding • Prototypes - Plastic • Plastics - Low Volume • Molds & Moldmaking - Plastic • Plastics - Painting

We are a full service plastic injection molding company specializing in prototype injection molding, low to mid volume production and mold making. We are headquartered in the Clearwater Beach/Tampa Bay area and have two manufacturing locations, Port Richey and Brooksville, FL. Employing 160, Seaway strives to provide technology leadership and performance excellence to medical, aerospace, military, packaging, food service, industrial and consumer products.

Quality Certifications: ISO 13485:2016, ISO 9001:2015 • ANSI/ASQ Q9001-2000 • ITAR REGISTERED • NADCAP ACCREDITED
Service Categories: Assemblies - Printed Circuit Boards • Cable & Wire Manufacturing • Coatings - Conformal • Rework & Repair - Electronic • Inspection Services

Approved supplier for Fermi Lab, EnerSys, Honeywell, Eaton, Raytheon, Motorola, GE Aviation, IGT.

Quality Certifications: ISO 9001:2008 • ISO 13485 • IPC A-610D CLASS 2&3 • AS 9100 REV C
SKB CORP.     Booth # 437
Service Categories: Plastics - Injection Molding • Plastics - Rotational Molding • Plastics - Thermoforming/Vacuum Forming • Plastics - Hot Stamping & Screening • Racks

One of the largest protective plastic case and rack manufacturers in the USA. Offering the best cases in the industry.

Service Categories: Castings - Die, Aluminum • Machining - Precision CNC • Tools, Dies & Fixtures • Castings - Die, Zinc

Aluminum, zinc & brass die casting & finishing company, supplying precision-machined components. The company has complete in-house CAD/CAM die design capabilities.

Quality Certifications: ISO 9002
Service Categories: Heat Treating • Brazing - Vacuum Furnace • Heat Treating - Vacuum Carburizing LPVC

We offer high quality Vacuum Heat Treating services producing bright, scale-free parts with minimal distortion. Markets served include aerospace, medical, power generation, firearms & ordnance, and more. Our state-of-the-art vacuum furnaces range from lab sized to 48’. Four plants located in Souderton, PA, Hermitage, PA, Greenville, SC, and Fontana, CA.

Quality Certifications: NADCAP • ISO 9001:2015, AS 9100D • BOEING / P & W / ROLLS ROYCE • G.E. S-1000
SOUCY BARON     Booth # 203
Service Categories: Rubber Molding • Rubber To Metal Bonding • Prototypes - Rubber

Custom molding of engineered precision rubber components with specialization in NVH (Noise, Vibration, Harshness). Markets served: personal protective equipment, lawn & garden equipment, agricultural, aggregate & mining equipment, defense, automotive & powersport industries. Custom compounding of all thermoset elastomers. Product design & testing services available. Worldwide locations.

Quality Certifications: ISO 9001:2015
Service Categories: Timing Pulleys & Belts • Gears • Gearboxes • Machining - Precision CNC • Screw Machining - Swiss/CNC Swiss

We make high-quality, high-precision small mechanical components and assemblies for critical motion control applications. Whether you need custom design and manufacturing to meet your requirements or a standard catalog item we can meet your needs. Standard components available include timing belts, pulleys, precision gears, bearings, couplings and many more.

Quality Certifications: ISO 9001 • AS9100 • Boeing BQMS Certified
Service Categories: 3D Printing • Rapid Prototyping • Prototypes - Models • Tooling • Carbon Fiber Molding

California's only dedicated Markforged Reseller: Markforged’s mission is to provide its customers with high strength parts, built right the first time. Markforged has revolutionized 3D printing with the world’s first carbon-fiber composite 3D printer. Markforged’s 3D printers and their groundbreaking materials include: X3, X5, X7 Mark Two, Onyx Series, Metal X Carbon Fiber -

Service Categories: Extrusions - Aluminum • Fabricating - Aluminum Extrusions • Machining - Aluminum

Manufactures precision aluminum extrusions in a 65,000 square foot facility located in Chino, California. Superior Metal Shapes extrudes parts in 6061, 6063, 2024 and 7075 aluminum alloys, and also offers in-house, secondary machining operations. Finishing services such as anodizing, heavy etching, chem-film and paint also available.

Quality Certifications: ASTM B221 • AMS QQ-A-200 • AS 9100
SURFACE FINISHES     Booth # 102
Service Categories: Optical Polishing • Lapping • Machining - Single Point Diamond • Grinding - I.D. & O.D. • Metrology - Equipment & Services

Precision Finishing, Fabrication and Refurbishment Services, Chemical Mechanical Polishing, Optical Quality Polishing, Precision Lapping, Single Point Diamond Machining, and Precision Low Stress Grinding. See our website for typical results.

Quality Certifications: ITAR REGISTERED
SWISSOMATION INC.     Booth # 127
Service Categories: Screw Machining - Swiss/CNC Swiss • Machining - Miniature Precision • Machining - Precision CNC • Plastics - Screw Machining • Screw Machining - Escomatics

CNC & Swiss Type machining and Micro-machining. Over 75 Citizen and Maier Swiss CNC Screw Machines. Prototype to Production; .004" (.1mm) to 1.625" (42mm) diameter, for the Medical, Dental, Electronics, Microwave, Government etc. Metals and Plastics! Our second location, Swissomation Virginia, 254 Industrial Park Dr. Amherst, VA 24521 Phone: 434-946-7360, ISO 9001:2008 Compliant.

Quality Certifications: SPC • KEYENCE INSPECTION • ITAR
Service Categories: Silicone / Rubber - Liquid Injection Molding • Rubber Molding • Rubber To Metal Bonding • Bushings • Heat Sinks

Manufacturer of Alpha-GEL brand silicone parts & components for many applications: Anti-vibration parts, Shock-absorbing materials, Thermally Conductive Pads & Paste. Alpha-GEL is soft, highly-durable, environmentally-friendly silicone that can be used over a wide temperature range (-40 C to +200 C). Visit us at

Quality Certifications: ISO 9001 • RoHS • UL 746 D • JIS/DTS
TEMPCO MFG. CO. INC.     Booth # 250
Service Categories: Stampings - Metal • Fabricating - Sheet Metal • Assemblies - Mechanical • Welding & Weldments • Tools, Dies & Fixtures

With over 70 years of experience, Tempco Manufacturing produces precision metal stampings, precision sheet metal fabrications, and mechanical assemblies for clients across numerous industries. Tempco Manufacturing offers a complete tool & die room to go along with secondary services to be your one stop shop for metal stampings and sheet metal fabrications.

Quality Certifications: AS9100D • ISO 13485:2016 • ISO 9001:2015
Service Categories: Assemblies - Cable • Die-Cutting • Engineering & Technical Services • Laser Cutting • Shielding - EMI/RFI

Manufacturers of wrap-around, repairable, re-enterable, flexible jacketing & shielding systems that feature multiple, unique closures allowing fast, easy use on new or existing installations. Our proven and custom-engineered solutions provide bundling, thermal management, water-blocking and EMI hardening, as well as flame, chemical and abrasion resistance.

Quality Certifications: ISO/TS 16949 • ISO 9001
THERMO COOL     Booth # 452
Service Categories: Heat Sinks • Extrusions - Aluminum • Castings - Die, Aluminum • Stampings - Progressive Die • Forgings - Cold

We manufacture custom heat sinks. Aluminum extrusions, copper heat pipes, skived fins, snapped fins, bonded fins, cold forging and die casting. Secondary processes, including CNC machining, anodizing, bead blasting, interface materials, and screw/spring attachment hardware. Prototypes to full production Thermal engineering services: Design & CFD simulations.

Quality Certifications: ISO 9001:2008
TPI-ARCADE INC.     Booth # 113
Service Categories: Castings - Aluminum • Castings - Sand & Shell • Castings - Sand

The most advanced Aluminum V-Process casting facility in the US. Twice as accurate and smooth as common sand castings, .125" wall thickness, 0° draft and unlimited pattern life are a few advantages. We pride ourselves on speed to market with samples in 2-3 weeks. Let us be your prototype and production foundry.

Quality Certifications: AS9100D • ITAR REGISTERED
TRUE CUT E.D.M. INC.     Booth # 339
Service Categories: Machining - CNC Milling & Turning • EDM • Tools, Dies & Fixtures • Machining - Production • Stampings - Metal

Precision CNC Machining, Milling and Turning and EDM facility. Specializing in short run and prototype parts, Tool & Die work and fixtures. Also, short thru medium volume production runs. Punch press capabilities to 400 ton press. Serving Aerospace, Defense, Medical, Oil and Gas along with commercial industries.

Quality Certifications: AS 9100 REV D
TUTCO     Booth # 447
Service Categories: Heating Elements - Custom • Heating Elements - Electric • Heaters - Custom • Assemblies - Electrical • Fans & Blowers

The world's largest supplier of open coil heating elements. We produce 35,000 to 38,000 heaters a day to meet the demands of our OEM customers. Leading the world in heating innovation, Tutco holds 80% of the U.S. Patents in open coil heating technology. Tutco heating components can be found in countless commercial applications, including refrigeration, HVAC, appliance, lab equipment and vending. We can quickly bring your project from concept to completion.

Quality Certifications: ISO 9001:2008 • ISO 14001:2004 • OHSAS 18001:2007
Service Categories: Wire & Cable Harnesses • Electronics - New Product Development • Castings - Investment • Plastics - Injection Molding • Electronics - New Product Development

We bring manufacturing under one umbrella. With US quality management, QC, logistics & engineering, we put the world's manufacturing capabilities at your doorstep. Electronic Controls - Castings/Forgings - Wire Harnesses - Metal Fabrication - Plastics - Wire Forming.

Quality Certifications: ISO 9001:2008

© 2019 The Job Shop Company • 16 Waterbury Road, Prospect, CT 06712 • (800) 225-4535