Northern California Design-2-Part Show
May 24 & 25, 2017
Santa Clara Convention Center • Santa Clara, CA



Search by Category

or

Search by Keywords


  Reset Search  



0 Exhibitors to Meet

Exhibitor List


Listed below are the current exhibitors and service categories of companies in the show.
This page is also an interactive tool for you to use when planning your personal visit.

[ 162 ] companies match your search.
FEATURED EXHIBITORS listed first alphabetically
A & B DIE CASTING CORP.     Booth # 322
Service Categories: Castings - Die, Aluminum • Castings - Die, Zinc • Machining - Precision CNC

We supply fully finished and machined, short and medium run die cast components to customers world-wide. We offer a full range of services to provide components ready for assembly, combined with order fulfillment options to provide the flexibility you need to meet your customers' needs.

www.abdiecasting.com

Quality Certifications: ISO 9001:2008
ADDITIVE MANUFACTURING LLC     Booth # 437
Service Categories: 3D Printing • Machining - CNC Milling & Turning • Tooling - Rapid Injection Molding • Prototypes - Rapid Sheet Metal • Rubber - Compression Molding

Established in 2009, we offer metal & plastic 3D Printing, and traditional manufacturing. ITAR-certified services include: SLA, CNC, SLS, FDM, DMLS, Polyjet, Urethane & Metal Castings, Laser Cutting, & Production Tooling & Molding. We have over 20 years of additive and traditional manufacturing experience, and provide outstanding customer service.

www.additivemanufacturingllc.com

Quality Certifications: ITAR CERTIFIED
ADRON TOOL CORP.     Booth # 110
Service Categories: EDM • EDM - Wire • EDM - Sinker • EDM - Small Hole Drilling • Machining - Production

Wire EDM specialists with over 50 CNC mach., CNC (sinker) std. EDM; largest capacity, 40"x32"x18", workpiece wt. 10,000 lbs., 27-1/2" thick; metal parts rapid prototyping svc. and prod. runs of complex, contoured shapes in tough to mach. or exotic mtl.; CNC production machining, coord. measuring sys., SPC, OGP optical non-contact measuring.

www.adron.com

Quality Certifications: ISO 9001:2008 • AS 9100 • NADCAP AS7116
AK STAMPING COMPANY     Booth # 240
Service Categories: Stampings - High Volume • Stampings - Short Run • Stampings - Progressive Die • Stampings - Metal • Stampings - Fourslide

A leader in precision stamping technology providing engineering solutions, product design, development, production, & high volume manufacturing & assemblies.

www.akstamping.com

Quality Certifications: ISO 9000:2008
AREIAS SYSTEMS INC.     Booth # 447
Service Categories: Assemblies - Electromechanical • Controls - Industrial & Machine Tool • Engineering & Technical Services • Instrumentation & Controls • Motors & Drives

Founded in 2000, Areias Systems, Inc. is a contract engineering and manufacturing company located in Scotts Valley, CA. We specialize in electro-mechanical assemblies, machines and controls. Our services range from building your cable assemblies, to turnkey machines or sub-assemblies for your production line or end products.

www.areiasys.com

Quality Certifications: ISO 9001:2008 • UL 508A • CE • EN
ASH INDUSTRIES     Booth # 144
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Plastics - Insert Injection Molding • Plastics - Hot Stamping & Screening • Prototypes - Plastic

Engineered for You. In-House MIM, Thermoplastic, and Silicone Injection & Roto Molding & Tooling as well as cast epoxy components & 7-Axis Swiss Lathe production. Molding includes custom inserts & over-molding, two shot molding. Component assembly, secondary processing & decorating, utilizing the latest in CNC, EDM & Modeling technology.

www.ashindustries.com

Quality Certifications: ISO 9001 • ISO 7 CLASS 10K CLEAN ROOM
BT LASER INC.     Booth # 342
Service Categories: Laser Cutting • Machining • Fabricating - Sheet Metal • Welding - TIG Aluminum • Welding - MIG

Provides custom design, fabrication and manufacturing services. American Performance Technologies and Rave Precision sit under the BT Laser umbrella. This allows us to provide precision laser cutting, precision machining and full fabrication support while delivering a complete customer experience. High quality products and total solutions on time is our mission.

www.btlaser.com

Quality Certifications: ISO 9001:2008
CENTURY RUBBER CO. INC.     Booth # 116
Service Categories: Rubber Molding • Rubber To Metal Bonding • Gaskets, Seals, Washers & O-rings • Rubber Stampings • Prototypes - Rubber

The company manufactures precision custom molded & die-cut elastomer products, utilizing compression, transfer & injection molding processes. We work with most elastomers including silicone, fluorosilicone, viton, neoprene, nitrile, EPDM & natural rubber. Strong emphasis on rubber to metal bonding. Made in America.

www.centuryrubber.com

Quality Certifications: ISO 9001:2008 • ITAR REGISTERED • US/Canada JCP Certified
CITO MEDICAL     Booth # 449
Service Categories: Engineering & Technical Services • CAD Design Services • Consulting - Manufacturing • Mechanical & Electronic Design • Prototypes - Electronic

We are an innovative product-development company whose expertise is in the engineering, design & development of state-of-the-art medical & biotech devices. Areas of Expertise: Design for Injection Molding, Design for Manufacturing & Assembly, High Volume Consumables Design, Industrial Design & Human Factors, Mechanical Engineering & Process Automation.

www.citomedical.com/index.html

DAVIS TOOL INC.     Booth # 448
Service Categories: Machining - CNC Milling & Turning • Stampings - Metal • Assemblies - Electromechanical • Metal Finishing - Plating

A leading producer of precision machined parts, sheet metal parts, and multi-level assemblies. We serve the Hi-Tech, Aerospace, Transportation, Medical, Military and Power Generation industries. Our processes include laser cutting, punching, forming, turning, milling, and EDM metal removal. We are AS9100 & ISO 9001:2008 registered.

www.davistl.com

Quality Certifications: AS 9100 • ISO 9001:2008 • NADCAP ACCREDITED
DB ROBERTS     Booth # 129
Service Categories: Fasteners • Electronic Hardware • Assembly Hardware • Levers, Knobs & Handles • Masking

Since our inception, we have been focused on providing solutions for fastener applications in Sheet Metal Fabrication, Metalworking, and Industrial Electronics. Our "Superior Customer Service" and "Commitment to Excellence" has proven to be a winning formula fueling innovation and rapid growth year after year.

www.dbroberts.com

Quality Certifications: ISO 9001:2008 • AS 9120A
DIGICOM ELECTRONICS     Booth # 331
Service Categories: Assemblies - Turnkey • Assemblies - Electronic • Assemblies - Printed Circuit Boards • Surface Mount Technology - Assembly • Prototypes - Electronic

Provides electronics manufacturing solutions for small to high-volume production, prototypes, PCB assemblies and complete box-build systems. Specializes in medical devices, aerospace, industrial, RF, wireless. Manufacturing in the California Bay Area since 1982. We deliver personal service, precision technology, and stringent process control. For more information or to get a quote, please email us at info@digicom.org

www.digicom.org

Quality Certifications: ISO 9001:2008 • ISO 13485:2003 • 21 CFR 820 • MIL-SPEC 45208/ITAR CERT
DINSMORE INC.     Booth # 340
Service Categories: Rapid Prototyping • CAD Design Services • Prototypes - Machining • Prototypes - Plastic • Tooling - Rapid Injection Molding

We specialize in product design & development, 3D printing, rapid prototyping, rapid manufacturing & rapid tooling. We strive to meet our customers' needs with competitive pricing, fast turnaround times & quality workmanship with a 100% satisfaction guarantee. We serve all industries: medical/dental equipment, aerospace, automotive, electronics, consumer products & more...

www.dinsmoreinc.com

E & S PRECISION MACHINE INC.     Booth # 219
Service Categories: Machining - CNC Milling & Turning • Prototypes - Machining • Laser Engraving • Machining - Precision CNC • Machining - Conventional CNC

We provide high quality prototypes. Short & long run CNC production & welded assemblies. For more information, please contact us at: sales@esprecision.com.

www.esprecision.com

Quality Certifications: ISO 9001:2008
FREETECH PLASTICS INC.     Booth # 221
Service Categories: Plastics - Pressure Forming • Plastics - Thermoforming/Vacuum Forming • Plastics - Low Volume • Electronic Enclosures • Tooling

Specializing in high-detail & close tolerance formed plastic parts. We offer CNC machining, fabrication assembly & engineering services. Our capabilities include plastic pressure & vacuum forming, drape forming, twin sheet forming, design development, materials selection & technical consulting. Primary markets we serve are medical, electronics, telecommunications, automotive & aerospace.

www.freetechplastics.com

Quality Certifications: ISO 9001 • AS 9100
GOENGINEER     Booth # 227
Service Categories: CAD/CAM Software • CAD Design Services • 3D Printing • CAD/CAM Training • Machining - CNC Milling & Turning

We deliver software, technology and expertise that enable companies to unlock design innovation and deliver better products faster. With more than 30 years' experience and thousands of customers in high tech, medical, machine design, energy and other industries, GoEngineer provides best-in-class design solutions from SOLIDWORKS CAD, Stratasys 3D printing, Creaform 3D Scanning, CAMWorks, POM and more.

www.goengineer.com

HARDWARE SPECIALTY CO. INC.     Booth # 202
Service Categories: Fasteners • Electronic Hardware • Adhesives • Assemblies - Electrical • Assembly Hardware

Our SAE AS9120 Registered Quality Management System and full service Quality Assurance facilities coupled with many years of technical sales experience and deep product line inventory ensure our commitment to total customer satisfaction. Together these make Hardware Specialty an unbeatable source for all your fastener and electronic component requirements.

www.hardwarespecialty.com

Quality Certifications: SAE AS9120 • ISO 9001:2008 • ISO 14001 • MIL STD 45662A
I C A CORPORATION     Booth # 111
Service Categories: Machining - Precision CNC • Electronic Enclosures • Fabricating - Sheet Metal • Assemblies - Mechanical • 3D Printing

Employee owned company providing build-to-print metal component parts & assemblies to the defense, analytical instrumentation & transportation industries. Wide range of capabilities - close tolerance CNC milling & turning; 5-axis machining; optomechanical component machining; sheet metal fabrication; custom electronic enclosures; welding; mechanical assembly; 3D printing.

www.icacorp.com

Quality Certifications: ISO 9001:2008 • ITAR REGISTERED
IPG PHOTONICS     Booth # 318
Service Categories: Lasers • Welding - Laser • Cutting - Tube & Pipe • Welding - Robotic • Welding - Solid State

The leading developer & manufacturer of high-performance fiber lasers & amplifiers. IPG’s diverse lines of low, medium & high-power lasers and amplifiers are used in materials processing, medical & numerous other applications. Our products are displacing traditional technologies in current applications & enabling new applications for lasers.

www.ipgphotonics.com

LUSTRE-CAL CORPORATION     Booth # 235
Service Categories: Bar Coding • Plastics - Hot Stamping & Screening • Switches - Membrane • Labels, Tapes & Decals • Die-Cutting

Manufacturer of high quality custom labels, nameplates, panel overlays, serialized & bar-coded property ID labels, membrane switches, shielding, and custom converted products. Laser cutting also available.

www.lustrecal.com

Quality Certifications: CSA & UL APPROVED • ISO 9001:2008 • MIL-P19834B • MIL-P6906B
MC ELECTRONICS     Booth # 440
Service Categories: Wire & Cable Harnesses • Assemblies - Cable • Assemblies - Electromechanical • Rapid Prototyping • Engineering & Technical Services

We are a custom cable assembly, wire harness, and box build manufacturer based in Hollister, CA. Our team of experts work across all engineering and manufacturing processes, from concept development through product life-cycle support. We hold Certifications for ISO 9001:2003, ISO 13485:2008, are RoHs compliant, and build to IPC-WHMA-A-620 workmanship standards.

www.mcelectronics.com

Quality Certifications: ISO 13485:2003 • ISO 9001:2008 • IPC/WHMA-A-620
MCNEAL ENTERPRISES INC.     Booth # 238
Service Categories: Plastics - CNC Machining • Fabricating - Plastic • Prototypes - Plastic • Plastics - Thermoforming/Vacuum Forming • Assemblies - Mechanical

Company provides prototype through production precision machining, fabricating, thermoforming & poly-welding of all plastics & assembly. All products built to customer specifications. Technical assistance is offered for engineering & materials selection. Capabilities include multilayer manifolds, CMP retaining rings & packaging.

www.mcneal.com

Quality Certifications: MIL-STD-45208 • ISO 9001
MCX INC.     Booth # 407
Service Categories: Assemblies - Cable • Wire & Cable Harnesses • Assemblies - Electromechanical • Assemblies - Electronic • Prototypes - Electromechanical

The company has over 35 years experience as a domestic contract manufacturer specializing in interconnection products including: Wiring Harnesses, Round Cable Assemblies, Flat Cable Assemblies, Flat Flex Assemblies, Jumpers, Wire Prep and Coaxial Cable Assemblies. Other assembly services include: Box Build, Electromechanical Assembly and Panel Assembly.

www.mcxinc.com

Quality Certifications: ISO 9001:2015 CERTIFIED • IPC/WHMA-A-620B • ITAR / HUBZONE CERTIFIED • CSA / UL APPROVED
PACIFIC STATES FELT & MFG. CO. INC.     Booth # 132
Service Categories: Gaskets, Seals, Washers & O-rings • Die-Cutting • Rubber Fabrication • Die-Cutting - Felt, Cork & Rubber • Rubber Stampings

Manufacturer of gaskets from non-metallic materials: cork, felt, foam, fibre, plastics, rubber, & sponge. Rubber extruded and molded parts, O-rings, EMI/RFI shielding, Die-cutting, fabrication & adhesive laminating. Mfgrs. of felt, foam & sponge rubber strips & adhesive backed tapes. ISO 9001:2008 Compliant. For more information, email us at sales@pacificstatesfelt.net.

www.pacificstatesfelt.com

PENCOM     Booth # 327
Service Categories: Fasteners • Machining - CNC Milling & Turning • Screw Machining • Material Handling • Assemblies - Mechanical

Global source for custom and standard fasteners; mechanical components and thermal management solutions. Our motto: Manufacturing Globally….Supplied Locally captures our ability to provide customers with low-cost production advantages and inventory automation capabilities from our twenty-five global facilities.

www.pencomsf.com

Quality Certifications: ISO 9001 • RoHS
POWDERCOAT SERVICES LLC     Booth # 401
Service Categories: Powder Coating • Coatings - E Coat

Serving its customers since 1981, capabilities include: Powder Coating, Electrophoretic Coating, Part Cleaning Services, Pad Print/Silk Screen, Turn-Key Mfg. & Supply Chain Management. ISO certified with 5 coating production lines. In-house testing lab & transportation services. Industries served include: Automotive, Builders Hardware, Music, Cosmetics, Medical, Electronics & many more.

www.powdercoatservices.com

Quality Certifications: ISO 9001:2008
RAY PRODUCTS INC.     Booth # 253
Service Categories: Plastics - Pressure Forming • Plastics - Thermoforming/Vacuum Forming • Plastics - Painting • Packaging • Fabricating - Plastic

Experts in custom heavy gauge thermoforming, including both pressure forming & vacuum forming. Forming capabilities up to 10' x 18' with 6 axis robotic trimming. Preferred supplier to the medical, electronics, telecommunications, automotive, recreational vehicle, green energy and pool & spa markets. In-house painting and contract manufacturing.

www.rayplastics.com

Quality Certifications: ISO 9001:2008 • UL LISTED
RSJ MACHINING     Booth # 422
Service Categories: Machining - CNC Milling & Turning • Machining - Multi Axis • Machining - Production • Machining - Precision CNC • Machining - Large Parts

A modern facility that specializes in precision machining and assembly for various industries including semi-conductor, tech, automotive and cryogenics. RSJ has built our reputation through attention to detail and quality throughout the process. Our engineering rep understands complex specs to produce precision parts for production with real time tracking.

www.rsjmachining.com

SIMALEX MANUFACTURING     Booth # 345
Service Categories: Castings - Die, Aluminum • Castings - Die, Zinc • Castings - Die, Magnesium • Castings - Die • Castings - Non-Ferrous

An Aluminum, Zinc and Magnesium manufacturing company with over 50 years experience in the industry. We work with you to ensure you get the parts and quality you need. Whether you are a small or large company doing short or long run projects, we are always here to assist you. Our design for manufacturing assistance is something you can use to optimize your product.

www.simalex.com

Quality Certifications: ISO 9001:2008
SMALLEY     Booth # 123
Service Categories: Snap Rings & Retaining Rings • Springs - Coil • Springs - Wave • Springs - Flat • Fasteners

We are the exclusive manufacturer of the industry-leading Spirolox® Retaining Rings, an innovative design that features a no gap, 360° retaining surface without protruding ears to interfere with mating components. We are also the originator of Crest to Crest® Wave Springs which save up to 50% of space compared to conventional coil springs.

www.smalley.com

Quality Certifications: ISO 9001 & ISO 13485 • ISO/TS 16949 • AS 9100 • ISO 14001
TECH-ETCH INC.     Booth # 106
Service Categories: Chemical Milling • Photochemical Etching & Machining • Shielding - EMI/RFI • Circuits - Flexible • Assemblies - Circuits

Photoetching services featuring specialty materials: tungsten, titanium, polyimide, elgiloy, molybdenum & nitinol. Flexible circuits manufacturer featuring fine line technology, microvias & SMT Assembly. EMI/RFI shielding products manufacturer specializing in beryllium copper spring fingers, conductive fabric gaskets & knitted wire mesh.

www.tech-etch.com

Quality Certifications: ISO 9001:2008 • AS 9100 REV C
THE OLANDER COMPANY     Booth # 452
Service Categories: Fasteners • Adhesives • Electronic Hardware • Engineering & Technical Services • Springs - Coil

The Olander Company, Inc. is a full line distributor of standard and metric fasteners, including commercial and specialty fasteners, precision hardware, electromechanical components, tools, adhesives, and wire management products. We have been proudly serving the Silicon Valley since 1962 and currently serve 63 different countries.

www.olander.com

ULTIMAKER - MATTERHACKERS     Booth # 346
Service Categories: 3D Printing • Rapid Prototyping • Rapid Prototyping - Equipment

Ultimaker and MatterHackers share the vision to make 3D printing accessible to all. It is why all of our desktop printers are extremely quiet, fast, accurate, reliable and effortless to use, embraced by professionals and novices alike. Ultimaker is one of the most successful and reliable open source 3D printing companies in the world.

www.matterhackers.com

WEISER ENGINEERING     Booth # 451
Service Categories: Machining - Multi Axis • Fabricating - Sheet Metal • Laser Cutting • Machining - CNC Milling & Turning • Welding & Weldments

A Full-Service ISO 9001 Certified Manufacturer operating out of a state-of-the-art 30,000 square foot facility. We offer our customers cutting edge technology and the latest automation in precision machining, sheetmetal, welding and fabrication all under one roof. From prototype to production, Weiser Engineering is "Your Partner in Manufacturing"

www.weimhp.com

Quality Certifications: ISO 9001:2008
WORLDWIDE FOAM LTD.     Booth # 417
Service Categories: Extrusions - Plastic Sheet

We were founded with a relentless focus on providing XLPE customers with the product they need, when they need it. Short lead times on buns and sheets as well as the widest range of sizes and densities available. Worldwide Foam, Ltd. ensures that our customers never have to worry about having the product they need.

www.worldwidefoam.com

Quality Certifications: ISO 9001:2008
3D-CAM INC.     Booth # 109
Service Categories: Rapid Prototyping • Tooling - Models & Prototypes • Tooling - Plastic Injection Molding • Prototypes - Models • Prototypes - Rapid Casting

In-house SLA, RTV Tooling/Urethane Castings, Prototype/Production Tooling, Injection Molding, Paint Shop, Appearance Models, Wax Patterns/Metal Castings, CNC Machining. MegaRoller, Inc. represents the best in rapid prototyping, sheet metal, injection molding, RIM molding, wire forming, machining and 3D printing. Contact: Kevin Kingston 831-295-3316.

Quality Certifications: AS 9100 REV B
A.L. JOHNSON CO.     Booth # 108
Service Categories: Castings - Aluminum • Prototypes - Rapid Casting • Castings - Zinc

Rubber Plaster Mold (RPM) process. Thin wall, fine surface, no draft, close tolerance, quick delivery, inexpensive, permanent tooling. Production quantities from prototype tooling. Complete machining and finishing. Castings - plaster mold & rubber mold.



Quality Certifications: AS 9100 • ISO 9001
ABX ENGINEERING INC.     Booth # 454
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Electromechanical • Testing - Printed Circuit Boards • Assemblies - Turnkey • Assemblies - Electronic

Full Service Electronic Contract Manufacturer providing PCBA to ElectroMechanical Assembly, Cable Assembly. Services have NPI (New Product Introduction/Prototype), Low to High Mix/Volume, PCBA, AOI, X-Ray, Full Test, Fulfillment (Ship to end Customers) and Depot Repair. The new additional Facility that opened December 2013, brings our Square Footage to 55,000.

Quality Certifications: ISO 9001:2008 • ISO 13485:2003 • IPC 610 • ITAR
ACF COMPONENTS & FASTENERS INC.     Booth # 343
Service Categories: Fasteners • Electronic Hardware • Industrial Supplies • Shielding - EMI/RFI • Gaskets, Seals, Washers & O-rings

A worldwide Master Stocking Distributor for AVK, BIVAR, HEYCO, FEDERAL-MOGUL, GENERAL CABLE, KEYSTONE, PANDUIT, PIC DESIGN, RAF, RICHCO, SHAKEPROOF, SUMITOMO, 3M, ZIERICK, and many other name-brand fastener and electromechanical component manufacturers, and is among the leaders in engineered specialty fasteners.

Quality Certifications: ISO 9001:2008
ACORN PRODUCT DEVELOPMENT INC.     Booth # 444
Service Categories: Engineering & Technical Services • Consulting - Manufacturing • Prototypes - Models • Assemblies - Mechanical • Assemblies - Electromechanical

Founded in 1993, Acorn Product Development is based in Silicon Valley with design centers in Boston & Atlanta. We provide comprehensive product engineering services; from turnkey product development, sub-assembly development, and engineering analysis to materials cost analysis and manufacturing cost reduction—for leading companies around the globe.

ACTECH NORTH AMERICA INC.     Booth # 405
Service Categories: Castings - Sand • Castings - Sand & Shell • Castings - Aluminum • Castings - Steel • Castings - Investment

A prototype sand and investment foundry specializing in "Rapid Casting Technology" for quick turn-around delivery. We are a full-service supplier from CAD to Casting to Heat Treatment to Inspection to Machining. We utilize equipment that fuses the shell sand grains together to furnish high-quality prototype metal investment castings.

Quality Certifications: ISO 9001 • ISO/TS 16949 • ISO 14001
ADVANCED MACHINING TECHNIQUES INC.     Booth # 136
Service Categories: Machining - CNC Milling & Turning • Machining - Multi Axis • Welding - TIG Aluminum • Machining

We are a precision manufacturer providing quality CNC machining & sheetmetal products at globally competitive prices through the use of unmanned machining cells & lean mfg. principles. We perform certified welding & mechanical assembly. Call us for details if you have a need for Hubzone Certification.

Quality Certifications: AS 9100 REV C • ISO 9001:2008 • ISO 13485 / ITAR Certified • AWS D1.1 / AWS D1.2
ADVANCED TECHNOLOGY     Booth # 243
Service Categories: Tooling - Rapid Injection Molding • Molds & Moldmaking - Plastic • Tooling - Plastic Injection Molding • Plastics - Injection Molding • Prototypes - Plastic

Injection Molded Parts in only 10 Days! Unique mold building process provides true injection molded production parts incredibly fast! Complex part geometry, all thermoplastic resins, production traceability and tight quality requirements, including those required for medical devices, are supported. All molds and manufacturing made in the USA in Southern California.

AERO-SPACE SOUTHWEST INC.     Booth # 431
Service Categories: Fasteners • Slides • Electronic Hardware • Shielding - EMI/RFI • Assembly Hardware

We are a certified distributor of fasteners and electronic components serving avionics, gaming, medical, energy, aerospace and defense markets.

Quality Certifications: ISO 9001:2008 • AS9120
A-LASER     Booth # 329
Service Categories: Laser Cutting • Laser Machining - Micro • Laser Drilling • Laser Marking • Photochemical Etching & Machining

A premier precision parts manufacturer, providing consistent, high quality laser services for a wide range of industries. Specializing in the processing of ultra-thin materials, our technicians provide solutions for your most challenging applications.

Quality Certifications: ISO 9001:2008
ALLMOTION INC.     Booth # 338
Service Categories: Motion Control • Motors & Drives • Heat Sinks

Manufactures Stepper Drives, Stepper Controllers, Servo Drives and Servo Controllers. The most compact Intelligent Stepper Motor Drives and Stepper Motor Controllers on the market today. Our Servo Motor Controllers and Brushless DC Motor Controllers feature quadrature encoder feedback and are also programmable to allow stand-alone operation.

AM COMPASS GROUP INC.     Booth # 319
Service Categories: Machining • Molds & Moldmaking - Plastic • Metal Injection Molding • EDM • Stampings - Metal

Offering one-stop shopping options to assist your mechanical needs from prototype to volume production with combination of CNC machining, injection molding, metal injection molding (MIM), and die casting. We have experienced engineers and skilled mechanics to produce high quality parts promptly at aggressive prices. We will be happy to support you!

Quality Certifications: ISO 9001:2000 • ISO 14001
AMALCO (AMERICAN ALUMINUM CO.)     Booth # 114
Service Categories: Stampings - Deep Drawn Shells • Hydroforming • Assemblies - Mechanical • Brazing - Aluminum Dip

Deep drawn & Hydroformed Enclosures; plus Aluminum Dip Brazing. SECONDARY OPERATIONS: CNC Machining, Anodizing, Iriditing, Painting (Powder Coat & Wet), Piercing/Forming, Welding, Light Assembly and Heat Treating. MATERIALS: Aluminum, Stainless, Brass, Copper, Hastelloy, Nickel, Steel & Specialty Metals. MARKETS SERVED - All.



Quality Certifications: MIL-I-45208A • ITAR REGISTERED
AMERICAN CASTING CO.     Booth # 420
Service Categories: Castings - Investment

Implantable Grade CoCr (F-75), Nickel Base (Inconel / Rene / Etc.), Copper Base, Mild and Low Alloy Steel and Stainless Steels are some of the alloys we specialize in. Whether we are manufacturing prototypes, high volume production or custom production products we deliver quality investment castings with the industries shortest lead times.

Quality Certifications: ISO 9001 • AS 9100
ANDERSON QUALITY SPRING MFG. INC.     Booth # 205
Service Categories: Springs - Coil • Springs - Flat • Springs - Wave • Assemblies • Stampings - Fourslide

Custom manufacturer of springs, wire forms and formed metal products. Our customers are in the automotive, sporting goods, electronic, medical, dental and motorcycle suspension products industries, worldwide. We work with our customers from design and prototyping to supplier managed inventory programs.



Quality Certifications: ISO 9001:2015 • IATF 16949:2016
AQS INC.     Booth # 107
Service Categories: Assemblies - Turnkey • Assemblies - Printed Circuit Boards • Assemblies - Electrical • Assemblies - Electromechanical • Optical Components

EMS Provider with capability to support from early design to market in shortest time frame at very low cost solution. Full support of PCBA & box build from NPI to mass production. ITAR Compliant.



Quality Certifications: IPC610B • ISO 9001 • TUV / UL LISTED • ISO 13485
ARC-TRONICS INC.     Booth # 241
Service Categories: Assemblies - Electronic • Assemblies - Electromechanical • Assemblies - Printed Circuit Boards • Assemblies - Turnkey • Prototypes - Electronic

We are a full-service Electronic Manufacturing Services (EMS) provider for turnkey products in printed circuit board assembly, cable/harness assembly, and complete box build or higher level integration. The company is ISO 9001:2008, ISO 13485:2003, and AS9100 Rev. C certified. Arc-Tronics is also an ITAR registered company.



Quality Certifications: ISO 9001:2008 • AS 9100 REV C • ITAR • ISO 13485:2003
ARGO SPRING MFG. CO. INC.     Booth # 120
Service Categories: Springs - Coil • Springs - Flat • Wire Forming & Fabricating • Stampings - Fourslide • Stampings - Metal

Manufacture CNC Coil springs, Flat springs, CNC wire forms, Metal Stampings, Fourslide products, assemblies (welding, staking, riveting etc.), washers (Belleville and curved) to blue print or specifications. AS9100 Certified.

Quality Certifications: ISO 9001:2008 • AS 9100C
ASCO SINTERING     Booth # 441
Service Categories: Powder Metal Parts • Gears • Valves & Controls • Assemblies • Copper - Materials

A contract manufacturer of Powder Metallurgy components offering highly engineered solutions since 1964. New product development or cost reducing existing parts. Near full density + all MPIF materials. High temperature sintering and in-house tool design. Complete to print; serving all markets including automotive. Kanban/JIT ISO-9001:2008 Certified.

Quality Certifications: ANSI/ISO/ASQ 9001:2008 • ISO 9001:2008
ASTEELFLASH     Booth # 317
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Turnkey • Assemblies - Electronic • Coatings - Conformal • Electronics - New Product Development

An international Electronic Manufacturing Services (EMS) company. In addition to our Fremont CA manufacturing facility, the company operates 17 manufacturing sites on 4 continents with a headcount exceeding 5,000 employees. The company was founded in Paris, France in 1999 and offers comprehensive and integrated design and manufacturing services.

Quality Certifications: AS 9100 / ISO 9001:2008 • ISO 13485 • ISO/TS 16949 • ITAR
BAY SEAL CO.     Booth # 350
Service Categories: Gaskets, Seals, Washers & O-rings • Rubber Molding • Rubber To Metal Bonding

Specializing in Engineered Sealing Solutions from o-rings (including spliced) to gaskets & tight tolerenced custom rubber molded shapes in all materials, including FFKM (Kalrez). We will help solve your most difficult sealing applications.

Quality Certifications: ISO 9001
BISCO INDUSTRIES     Booth # 320
Service Categories: Fasteners • Electronic Components • Electronic Hardware • Assembly Hardware • Bearings

We are a premier distributor of Electronic Components and Fasteners used for production in Aerospace, Communication, Computer, Fabrication, Industrial Equipment, Instrumentation, Marine and Military Industries. We strive to be our customers' sole supplier of electronic components and fasteners by being a local presence and providing exceptional service.

Quality Certifications: AS 9100 • ISO 9001:2008 • BOEING APPROVED • LOCKHEED MARTIN
C2G - A BRAND OF LEGRAND     Booth # 339
Service Categories: Cable & Wire Manufacturing • Assemblies - Cable • Cables - Mechanical • Fiber Optic Tooling & Components • Rapid Prototyping

We provide solutions and services to original equipment manufacturers in industries such as medical/healthcare, contract manufacturing, gaming, hospitality, and industrial—ranging from regionally-based organizations to multi-national companies. Whether you need a modified stock cable alteration, or a custom engineered application, you can count on C2G.



Quality Certifications: ISO 9001:2008
CALPIA - JOINT VENTURE PROGRAM     Booth # 307
Service Categories: Manufacturing Association • Assemblies • Packaging • Assemblies - Turnkey • Wire & Cable Harnesses

The Joint Venture Program (JVP) provides vocational training opportunities to offenders within California’s correctional settings and it offers businesses attractive benefits for employing them. Your profit. Their opportunities. Our commitment.

CARBON INC.     Booth # 406
Service Categories: 3D Printing • Polyurethane - Parts • Tooling - Models & Prototypes

We are working at the intersection of hardware, software and molecular science to deliver on the promise of 3D printing. This breakthrough is possible with Carbon’s Continuous Liquid Interface Production (CLIP). Carbon's commercial CLIP-based additive manufacturing machine, combined with the Smart Part Washer are powerful tools for low-volume manufacturing.

CELLOTAPE-A RESOURCE LABEL GROUP CO.     Booth # 337
Service Categories: Labels, Tapes & Decals • Die-Cutting • Nameplates, Dials & Panels • Switches - Membrane • Rubber - Compression Molding

Manufactures pressure sensitive labels, RFID tags and custom die cut components - overlays, nameplates, insulators, gauges, EMI/RFI shielding, gaskets, shims spacers, shock absorbers, LRF components, tamper-evident security seals & others. Cellotape's print processes include screen, thermal transfer, hot stamp, digital, flexography, RFID & Near Field Communications converter.

Quality Certifications: UL CERTIFIED • ISO 9001:2015 • RoHS
CENTURY SPRING CORP.     Booth # 223
Service Categories: Springs - Coil • Stampings - Fourslide • Wire Forming & Fabricating • Springs - Flat • Springs - Wave

A MW Industries location, is the go-to source for Made in USA stock and custom springs, for any OEM or MRO application. Same day shipments from over 35,000 stock designs - compression, extension, torsion, tapered, disc, urethane and die springs. Century also specializes in custom springs. Inquire at info@centuryspring.com. FREE CATALOG upon request.



Quality Certifications: ISO 9001:2008
COFAN USA     Booth # 303
Service Categories: Heat Sinks • Fans & Blowers • LED's • Machining - Conventional CNC • Machining - Precision CNC

Provides DC Axial Fans, DC Blower Fans, CPU Coolers, Active BGA Heat Sinks, Passive BGA Heat Sinks and Custom Heat Sink products for the most difficult thermal challenges; using state-of-the-art fan and heat sink technology combining various alloys at very competitive prices. Provides OEM customized manufacturing for metal fabrication, extrusion, die-casting and injection.

Quality Certifications: ISO 9001:2008 • ISO 14001:2004 • OHSAS 18001 • CE, RoHS
COMPASS MFG. SERVICES     Booth # 421
Service Categories: Assemblies - Electromechanical • Assemblies - Electrical • Cable & Wire Manufacturing • Instrumentation & Controls • Panels - Control

We are a well established electronic contract manufacturer specializing in System Integration, Electro-Mechanical Assembly, along with cables and harnesses. CMS supports many Fortune 500 companies in Transportation, Semiconductor Equipment, Energy, Industrial, and Medical sectors.

Quality Certifications: ISO 9001:2008 • UL 508A • RoHS • CSA & UL APPROVED
COMPASS PRODUCT DESIGN INC.     Booth # 433
Service Categories: Industrial Design Services • CAD Design Services • Engineering & Technical Services • Plastic Cabinets & Enclosures

Designs That Work - Brands That Sell. Compass Design is an award-winning product design and development firm with offices in Silicon Valley and Tennessee. We design and engineer innovative products, intuitive interfaces and compelling brands. We have expertise in medical devices, consumer electronics, sporting goods, toys, business/office and communications products.

CONNECTICUT COINING INC.     Booth # 215
Service Categories: Stampings - Deep Drawn Shells • Stampings - Short Run • Stampings - Metal • Stampings - Ferrous & Non Ferrous • EDM

Deep drawing specialist in a wide range of metals based on customers' supplied drawings. All required tooling is built and tested on site. We supply small to medium production runs to the high voltage power & X-ray tube manufacturers; as well as components for aerospace and other industries.



Quality Certifications: AS 9100C • ISO 9001:2008 • ITAR REGISTERED
COOLING SOURCE     Booth # 328
Service Categories: Machining • Engineering & Technical Services • Extrusions - Aluminum • Prototypes - Machining • Plastics - Injection Molding

A heatsink manufacturer offering the most comprehensive value-added standardized or custom heatsink solutions for today's global market. Using the very latest technology available to heatsink manufacturers, we offer a wide range of products for our global market clients.

Quality Certifications: ISO 9001:2015 • ITAR
CREATIVE MFG. SOLUTIONS     Booth # 242
Service Categories: Fabricating - Sheet Metal • Laser Cutting • Machining • Prototypes - Machining • Assemblies

We are a full service machining & sheet metal manufacturing comapany that provides one-stop shopping for all your design & manufacturing needs.

Quality Certifications: ISO 9001:2008
DA/PRO RUBBER INC.     Booth # 112
Service Categories: Rubber Molding • Plastics - Injection Molding • Silicone / Rubber - Liquid Injection Molding • Rubber To Metal Bonding • Rubber - Compression Molding

5 facilities for compression/injection molding - high-quality custom rubber, TPE, & plastic components molded to precision tolerances such as diaphragms, seals, connectors, molded shapes, rubber to metal parts for medical device, electronic & aerospace industries. Class 10,000 cleanroom - chemists & engineers assist in optimal moldability. sales@daprorubber.com



Quality Certifications: ISO 9001
DEKRA NORTH AMERICA     Booth # 249
Service Categories: Inspection Services • Quality Systems • Testing - Mechanical Standards • Testing - Environmental

We are a 3rd party certification and verification company that validates manufacturing standards for U.S. based clients. These standards include ISO 9001, 14001, 50001, 13485, AS 9100, TS 16949, OHSAS 18001 and many others. DEKRA also provides Assessment Services for Sustainability, Responsible Supply Chain, Energy Performance, Business Continuity/Disaster Recovery, and Asset Integrity Management.

Quality Certifications: ISO 9001:2008 / AS 9100 • ISO/TS 16949 • ISO 14001:2004 • ISO 13485 / ISO 50001
DESIGN OCTAVES INC.     Booth # 113
Service Categories: Plastics - Reaction Injection Molding • Plastics - Low Volume • Electronic Enclosures • Plastics - Painting • Polyurethane - Parts

Our clients are Medical, Instrumentation, Analytical, Government & Security Companies. We specialize in UL94V-O enclosures in quantities of 100-5000 units per year. All tooling is built In-house to the most stringent standards & guaranteed for a minimum of 10,000 cycles. Also, we provide Painting, UL Approved Shielding & Decoration.

Quality Certifications: UL-QMRX2 • UL-QMMY2 • ISO 9001:2008
DIAMOND TOOL & DIE INC.     Booth # 224
Service Categories: Machining - CNC Milling & Turning • Machining - Precision CNC • Plastics - CNC Machining • Prototypes - Machining • EDM - Wire

Full Service Jobshop, 45+ years experience. CNC (& Manual) Milling & Turning; Lathes up to 40" swing, Horizontals up to 70". In-house Wire EDM, Fixturing, Tooling, Welding, Honing, Grinding, Repairs, Reverse Engineering, Deburring, Assembly, Inspection. We machine all metals and plastics. Prototype to Production runs. Quality with competitive pricing. Employee owned.

DOLPHIN INCORPORATED     Booth # 353
Service Categories: Castings - Investment • Castings - Ferrous • Castings - Non-Ferrous • Castings - Stainless Steel • Castings - Aluminum

“DOLPHIN IS A CUSTOMER SERVICE COMPANY THAT JUST HAPPENS TO MAKE PRECISION INVESTMENT CASTINGS” Supplies investment castings to many different industries. Petrochemical, flow metering, medical, fiberglass insulation, railroad, automotive, and aerospace companies, are just a few industries that rely on Dolphin’s 49 years of expertise.

Quality Certifications: ISO 9001: 2008 CERTIFIED • PED
DPMS DBA DANCO MACHINE     Booth # 302
Service Categories: Machining - Precision CNC • Machining - CNC Milling & Turning • Machining - Production • Machining - Multi Axis • EDM

A precision contract manufacturer located in Santa Clara, CA. Core competencies include precision machined and assembled components for Medical, Aerospace, Defense, and other markets; helping customers with R&D/engineering support, wire & sinker EDM, supply-chain management, and DFM. Dedicated Program Managers and VOC/HOC processes deliver best-in-class customer service.

Quality Certifications: ISO 9001 • ISO 13485 • AS 9100:C • ITAR
DPSS LASERS INC.     Booth # 236
Service Categories: Laser Marking • Laser Engraving • Laser Cutting • Lasers

Low-cost “Quasi-CW” UV lasers, 0.1-5.0+Watts, 355nm with high peak powers. Applications using our UV “Cold-Laser” are Micromachining, Marking, Sapphire Scribing, ITO Removal, Semiconductor and Medical Packaging.

EDM TECHNOLOGIES INC.     Booth # 124
Service Categories: EDM • EDM - Wire • EDM - Sinker • EDM - Small Hole Drilling

Electrical discharge machining (EDM) shop specializing in Wire EDM, Sinker EDM, Small Hole EDM & precision machining. EDM Technologies is a certified precision tooling source.

Quality Certifications: ISO 9001:2008
ELECTROPIN TECHNOLOGIES     Booth # 333
Service Categories: Cold Heading - Cold Forming • Wire Forming & Fabricating • Thread Rolling • Thread Machining • Cleaning & Degreasing

Manufacturer of small pin shaped parts. Cold Heading & Die Pin Rolling are high speed, scrap free processes which yield tremendous cost savings.

Quality Certifications: ISO 9001:2000
EPILOG LASER     Booth # 201
Service Categories: Lasers • Laser Cutting • Laser Engraving • Laser Marking • Bar Coding

An industry leader in design of laser engraving, cutting & marking systems, manufacturers of the Epilog Zing, Mini, Helix, Fusion and FiberMark series of laser systems.



Quality Certifications: ANSI STANDARDS • IEC • CE • CFR 21
FATHOM     Booth # 138
Service Categories: 3D Printing • Rapid Prototyping • Molds & Moldmaking - Plastic • Plastics - Injection Molding • Machining - Precision CNC

FATHOM is driven by advanced technologies. We leverage our expertise in 3D printing and additive manufacturing to help our customers innovate faster and more efficiently. Our product portfolio includes professional 3D printers and manufacturing systems, prototyping and advanced manufacturing services, with design and engineering resources in support of these.

FICTIV INC.     Booth # 316
Service Categories: 3D Printing • Machining - CNC Milling & Turning • Prototypes - Fabrication • Prototypes - Rapid Casting • Prototypes - Models

Our manufacturing platform is the most efficient way to fabricate parts. Powered by a distributed network of highly vetted vendors, Fictiv customers can get 3D printed parts in 24 hours and CNC machined parts in 3 days. The online interface makes it easy for customers to get instant quotes, review manufacturing feedback, and manage orders—all through a single service.

Quality Certifications: ISO 9001:2015
FOREST CITY CASTINGS     Booth # 334
Service Categories: Castings - Graphite Mold • Castings - Aluminum • Castings - Zinc • Castings - Die, Aluminum • Castings - Die, Zinc

The leader in Graphite Permanent Mold Technology, rapid production tooling, CNC machining, & economical, high precision mfg. of zinc & aluminum castings. We offer high quality castings in low and medium production volumes and a lifetime warranty on every production mold we make. Graphite molds are a fraction of the cost of die cast tools.

Quality Certifications: CONTROLLED GOODS • ISO 9001:2008 • ISO 14001:2004 • BSOHSAS: 18001:2007
GASSER & SONS INC.     Booth # 104
Service Categories: Stampings - Deep Drawn Shells • Machining - CNC Milling & Turning • Stampings - Metal • Stampings - Progressive Die • Machining - Precision CNC

Since 1916 Gasser continues to Provide: Precision Deep Drawn Components, Secondary Machining, A Vast Tooling Library, Custom Formed Lead Lining for Housings and Assemblies, Design Engineering Services, Production Quantity Runs and Quality...with Confidence.

Quality Certifications: ISO 9001 • ITAR REGISTERED
GENERAL FOUNDRY SERVICE     Booth # 226
Service Categories: Castings - Aluminum • Castings - Plaster Mold • Castings - Sand & Shell • Castings - Permanent Mold • Castings - Investment

We are the only foundry offering 5 complementary casting processes, in-house patternmaking, machining, surface finishing, and inspection - a true best in class turnkey solution. Thin/thick walled, smooth surface, class A finishes, oz. to 500 lbs., design for manufacturing, breaking design rules with complex parts.

Quality Certifications: ISO 9001:2015 • ITAR REGISTERED
GOPROTO INC.     Booth # 247
Service Categories: 3D Printing • Machining • Tooling - Plastic Injection Molding • Tooling - Casting • Prototypes - Models

Delivering turnkey plastic and metal part manufacturing solutions including industrial design model making, rapid prototyping, additive manufacturing, cast urethane, CNC machining, rapid sheet metal, rapid injection tooling, production parts (injection molding, stamping, die-cast, sheet metal), and part finishing to complete your product.



Quality Certifications: ISO 9001
GPC ELECTRONICS     Booth # 134
Service Categories: Assemblies - Electronic • Assemblies - Turnkey • Wire & Cable Harnesses • Surface Mount Technology - Assembly • Assemblies - Printed Circuit Boards

Since our inception in 1985, we've had a track record of working with leading OEMs in North America, Europe, Asia & the Pacific. We are able to customize processes, delivering unique solutions to our customers, providing them with a competitive advantage & positive outcomes. We are a full service EMS and cable harness provider with three manufacturing sites globally.



Quality Certifications: ISO 9000 • ISO 14000 • ISO 13485 • ISO/TS 16949
GREENE RUBBER CO. INC.     Booth # 234
Service Categories: Rubber Fabrication • Rubber Molding • Rubber - Transfer Molding • Silicone / Rubber - Liquid Injection Molding

Custom rubber gaskets & seals. Custom rubber molding, LSR, vibration isolation, rubber-to-metal bonding, Chomerics EMI & Thermal materials, Rogers Poron Urethane Foams, 3M Adhesives, Parker O-Rings, St. Gobain tubing and Panasonic PGS.

Quality Certifications: ISO 9001:2008 • AS9100C
HARMONY CASTINGS LLC     Booth # 119
Service Categories: Castings - Aluminum • Castings - Sand & Shell • Castings - Sand

We are a leader in the production of aluminum castings. We are an ITAR compliant and AS9100 Certified facility. Our V-process delivers tight tolerances, thin walls and excellent surface finish. Further we're able to bring your project from model to production in just three weeks.



Quality Certifications: ISO 9001:2008 • AS 9100 REV C
HAWK RIDGE SYSTEMS     Booth # 428
Service Categories: CAD/CAM Software • 3D Printing • Assemblies • Machining • Plastics - Injection Molding

A global provider of engineering design and manufacturing software including SOLIDWORKS 3D CAD, Hawk Ridge Systems has solutions for 3D design, simulation, plastics, assemblies and wiring. CAMWorks offers CNC machining and our 3D Printer line from HP, Markforged, and Artec provides the most competitive solutions for 3D printing. Ask us more at hawk@hawkridgesys.com.

HELICAL PRODUCTS CO.     Booth # 225
Service Categories: Couplings - Misalignment • Springs - Coil • Motion Control

Manufactures the HELI-CAL®Flexure. This highly engineered product makes bar stock flexible and can be found in applications ranging from satellite instruments to conveyors, medical devices and oil field equipment. It is commonly used as a flexible shaft, coupling, a u-joint, or a “machined” spring.

Quality Certifications: AS 9100 • ISO 9001:2008 • RoHS • ITAR
HILLTOP TECHNOLOGY LABORATORY INC.     Booth # 415
Service Categories: Prototypes - Machining • Machining - Aluminum • Machining - Precision CNC • Machining - CNC Milling & Turning • Machining - Robotic

Specializes in prototypes, custom CNC machining, short run productions, and quick turnaround products. Rapid prototyping of precision machining is our specialty.

IMT PRECISION INC.     Booth # 351
Service Categories: Machining • Machining - Large Parts • Machining - CNC Milling & Turning • Machining - Weldments • Prototypes - Rapid Sheet Metal

We are the Bay Area's premier source for machining and sheet metal fabrication. Specializing in large machining (up to 200" x 135" x 42"), IMT Precision offers unparalleled service and capabilities. IMT is ISO 9001:2008 certified and has a 50,000 sq. ft. manufacturing facility in Hayward, CA.

Quality Certifications: ISO 9001:2000
INLAND METAL TECHNOLOGIES INC.     Booth # 308
Service Categories: Fabricating - Sheet Metal • Machining - CNC Milling & Turning • Prototypes - Fabrication • Assemblies - Mechanical • Engineering & Technical Services

A leading provider of precision sheet metal fabrications, enclosures, weldments & assemblies. Inland specializes in small to mid-volume production with extensive experience in DFM, NPI and Lean Manufacturing. Our engineers design innovative solutions for your manufacturing & fabrication challenges. For additional information please contact: sales@inlandmetal.com.

Quality Certifications: AS 9100 • ISO 9001:2008 • AWS D1.1 • RAYTHEON & ABBOTT CERTIFIED
INSACO INC.     Booth # 115
Service Categories: Grinding - Ceramics • Machining - Ceramics • Grinding - Glass • Ceramic Parts

Precision fabricator of ultra hard materials, utilizing advanced ceramic materials including sapphire, ceramics from all producers, glass, quartz, & many others. Machining to very precise dimension & tolerances in a variety of shapes & configurations as required. No standard parts/all mfg. to specific customer requirements. Prototype to production. No metals or plastics.



INTERNATIONAL CERAMIC ENGINEERING     Booth # 142
Service Categories: Ceramic Parts • Machining - Ceramics • Grinding - Ceramics • Ceramics - Metallizing & Plating • Prototypes - Machining

A leading manufacturer & fabricator of technical ceramic materials & machinable thermo-plastics. We offer engineering assistance during the prototype process through to production. We specialize in unique geometries made from high quality advanced materials. Competitive pricing with quick deliveries. Materials include Alumina Oxide, Boron Nitride, Macor™, Zirconia, PEEK, Ultem & More!



ISO FINISHING/EAGLE MOULDINGS     Booth # 418
Service Categories: Metal Finishing - Tumble & Vibratory Polishing • Extrusions - Aluminum • Surface Finishing • Fabricating - Aluminum Extrusions • Cleaning - Ultrasonic

ISO Finishing is a mass finishing job shop specializing in mechanical surface improvement services for medical, OEM and all other precision component manufacturers. Eagle Mouldings is a manufacturer, warehouse, and distributor of custom and hard-to-find aluminum extrusions with hundreds of in-stock custom aluminum trims and standard shapes for architectural millwork and store fixture/display manufacturers.

Quality Certifications: ISO 9001: 2008 CERTIFIED • F.F.L.
JOHNSON CENTRIFUGAL TECHNOLOGY     Booth # 218
Service Categories: Forgings - Aluminum • Castings - Brass • Castings - Stainless Steel • Machining • Forgings - Seamless Rolled Rings

Formed aluminum, copper, stainless components to wrought properties. Excellent anodizing response with high vacuum integrity. Custom alloys & complete finished machining to your specifications.



Quality Certifications: MIL-SPEC 45208 • ISO 9001:2008
JWP MANUFACTURING     Booth # 206
Service Categories: Machining - CNC Milling & Turning • Screw Machining - Swiss/CNC Swiss • EDM - Wire • Prototypes - Machining • Machining - Multi Axis

From Microscopic Machining, to 50" x 80" envelope work pieces. JWP has eight 5-axis machining centers within 3 Cell systems, Horizontal, Vertical, Mill/Turning, Turn/Milling. Wire EDM, Stress Relief Heat-Treatment and Lapping. JWP serves the Medical, Commercial Aircraft, Defense, Laser/Optics and Semiconductor industries globally. NPI, Quick-turn, Production Complexed Machining, Medium and Simple in complexity.

Quality Certifications: ISO 9000:2008 • ITAR REGISTERED • ISO 13485 - AS9102
KAGA (U.S.A.) INC.     Booth # 403
Service Categories: Stampings - Metal • Stampings - Short Run • Stampings - High Volume

Specializing in precision stamped metal parts and related tooling technologies for over 35 years. Its brand-new KAGA-SPC stamping technology can minimize gaps between forms while keeping sharp corner angles without any machining processes. Come & see actual samples at our booth.

Quality Certifications: ISO 9001:2008 • ISO 14001:2004
KNIGHTSBRIDGE PLASTICS INC.     Booth # 344
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Plastics - Thermoset Molding • Plastics - Insert Injection Molding • Welding - Laser

A precision injection molder with an "In-House" toolroom. We specialize in small intricate parts using many high temperature & chemically resistant materials.

Quality Certifications: ISO 9001:2008 • ISO 13485:2003
KOVATCH CASTINGS INC.     Booth # 118
Service Categories: Castings - Investment • Castings - Stainless Steel • Castings - Aluminum • Castings - Steel • Prototypes - Rapid Casting

Ferrous & non-ferrous air-melt alloys. Up to 30 lbs. short & long production runs for aerospace, military, medical castings. Full NDT, chemical laboratory & in-house machining & tooling. We also quote rapid prototyping with our in-house wax prototype printer. Surgical tools, Cobalt spherical bearings, rod ends, manifolds, military ordnance components, manifolds.



Quality Certifications: NADCAP WELD & NDT • AS 9100C / ISO 9002 • GE AEROSPACE • LOCKHEED / BOEING APRV.
KURT MFG. CO.     Booth # 127
Service Categories: Machining - Precision CNC • Assemblies - Electromechanical • Castings - Die, Aluminum • Extrusions - Impact • Gaging - Custom Engineered

Precision CNC Machining - Turning and Milling. Multi-Axis and FMS lines. Development to production, impact extrusions, screw machining, class 1000 clean room, precision gears & assembly, aluminum die castings, custom gaging. Facilities in Minneapolis, MN, Lyman, NE & Pueblo, CO.

Quality Certifications: ISO 9001:2008 • AS 9100C
LAMAR TOOL & DIE CASTING INC.     Booth # 438
Service Categories: Castings - Die, Aluminum • Diecasting Design • Machining - Castings • Tools, Dies & Fixtures • Tooling - Casting

Our die casting department features fully automated die casting machines from 350 to 730 tons of clamping pressure. Alloys used at Lamar: Aluminum, Zinc and ZA. 40 years of design and tool and die making experience, including off shore tooling. Advanced CNC machining on complex castings.

Quality Certifications: ISO 9001:2000
LASERAGE/VENTA MEDICAL/AMETEK EMC     Booth # 121
Service Categories: Welding - Laser • Laser Cutting • Laser Drilling • Laser Machining

Contract manufacturing utilizing a wide variety of materials offering precision laser welding, cutting, ablation, and drilling of metals, plastics and ceramics. Medical device components, cleanroom assembly and metal finishing operations. CO2, YAG, Fiber, Disk, Femto, DPSS & Excimer lasers. Glove box welding. Equipped to handle both low and high volume productions. Today manufacturing in northern California, Midwest and low-cost regions.



Quality Certifications: ISO 13485 • ISO 9001 • CLASS 7 CER
LEE SPRING     Booth # 251
Service Categories: Springs - Coil • Springs - Flat • Springs - Wave • Stampings - Fourslide

Springs in stock ready to ship or made to your specifications. Large selection of stock Compression, Extension, Torsion, HEFTY™ Die, REDUX™ Wave, LeeP™ Plastic Composite, MIL-SPEC, Belleville Washer, Battery and Constant Force Springs. Custom Springs, Stampings, Wire Forms and Fourslide design and manufacturing. Prototypes through large production runs.



Quality Certifications: ISO 9001 • RoHS / REACH • MIL SPEC AS24585 • MIL SPEC AS24586
M & F GAUGE AND SPECIALTY CO. INC.     Booth # 426
Service Categories: Machining - CNC Milling & Turning • Assemblies - Turnkey

Metal Machining, Punch Press, General Assembly.

Quality Certifications: ISO 9001:2008
MAG-KNIGHT INC.     Booth # 416
Service Categories: Die-Cutting • Fabricating - Plastic • Fabricating - Non-Metallic • Fabricating - Felt, Cork & Rubber • Laser Cutting

We offer low cost nationwide die cutting, laser cutting, prototyping, assembly and packaging from OEM's to small companies alike. Our customers include medical, industrial, OEM, aerospace, fuel cell, educational, tactical, power sports, refractory, entrepreneur, textile, chemical, retail, government and many more.

Quality Certifications: BOEING APPROVED • ANSI/Y14.5M • SPC
MELROSE NAMEPLATE & LABEL CO.     Booth # 217
Service Categories: Switches - Membrane • Nameplates, Dials & Panels • Labels, Tapes & Decals • Assemblies - Electronic • Engineering & Technical Services

Manufacturing: Touch screen assemblies, membrane switches, silicone keypads, graphic overlays, industrial and decorative nameplates, UL labels. Capabilities: -Backlighting, optical adhesives, chrome inks -Digital processing (laser, UV inkjet)-Acid etching, embossing, plating -ISO 9001:2008 -Design: EE and ME: IO interfaces (I2C, USB) and molded and metal enclosures.

Quality Certifications: UL APPROVED • CSA APPROVED
MERCURY CORP.     Booth # 220
Service Categories: Fabricating - Sheet Metal • Metal Cabinets & Enclosures • Assemblies - Turnkey • Fabricating - Aluminum • Fabricating - Stainless Steel

AN INTEGRATED SOLUTION TO YOUR SUPPLY CHAIN - we build custom racks, frames, enclosures, plastics & stamping assemblies. CORE PROCESSES: Design, Metal Fabrication, welding of all types of metals, Plastic Injection Molding, Finishing, Turn-Key Assemblies & KAN BAN.



Quality Certifications: ISO 9001:2008 • ISO 13485 • AS 9100 • ITAR REGISTERED
METALFX/ADVANCED MFG. & DEV.     Booth # 101
Service Categories: Fabricating - Sheet Metal • Metal Cabinets & Enclosures • Assemblies - Electromechanical

Custom design, manufacturing, and integration of sheet metal components for some of today's leading Electronic, Medical, Network, Life Science, and Test and Measurement companies. We also offer in-house weld, paint, powder coat and silk screen services.

Quality Certifications: ISO 9001:2000
MICROCONNEX     Booth # 402
Service Categories: Machining - Miniature Precision • Electronics - New Product Development • Drilling - Micro • Rapid Prototyping • Fabricating - Printed Circuit Boards

Laser micromachining & drilling using ESI 5200, ESI 5300, 5300HE laser systems with spot size of less than 25microns. Services include microvia drilling, dicing, dielectric laser ablation & skiving. Design & fabrication of high density, fine-line, fine-pitch (less than 2 mil trace / space) flex circuits & high density interconnect solutions. Single or multilayer designs.

Quality Certifications: ISO 9001:2008 • ITAR • IPC
MIKRON RUBBER PRODUCTS     Booth # 304
Service Categories: Rubber Molding

Mikron Rubber Products is a division of IRP Group Holdings Inc. IRP Group consists of three divisions specializing by industry and unique, critical to function processes. The Mikron division specializes in critical to function molded shapes from proto-type to mass production. Our technology includes compression, transfer, and injection molding of rubber.

MINDRUM PRECISION INC.     Booth # 233
Service Categories: Machining - Precision CNC • Optical Components • Ceramic Parts • EDM - Wire • Machining - Ceramics

Custom machining & polishing of precision components & assemblies. 5-axis CNC milling, turning surface grinding, plano, spherical & cylindrical polishing continuous & double-side polishers, glassblowing, acid etching & soldering. Materials: glass, quartz, sapphire, ceramics & similar. Aluminum, stainless steel, titanium & simular. Class 1,000 cleanroom 100 with flo.

Quality Certifications: ISO 9001:2008 • MIL-I-45208A
MISSION PLASTICS INC.     Booth # 427
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Plastics - Insert Injection Molding • Tooling - Plastic Injection Molding

An ISO 13485 and ISO 9000 registered company, MIssion Plastics specializes in custom injection molding of medical device components. Precision manufacturing with scientific molding practices encompasses horizontal, vertical and insert molding. Comprehensive tool room capabilities include mold design, tool construction, tool repair and preventive maintenance.

Quality Certifications: ISO 9001 / ISO 13485 • ISO 8 CLASS 10K CLEAN ROOM • 5S • ISO CLASS 8 CLEAN ENVIRONMENT
MOS PLASTICS     Booth # 450
Service Categories: Plastics - Injection Molding • Tooling - Plastic Injection Molding

We specialize in high-precision, injection-molding, contract manufacture, and assembly of medical device, life science, and technology OEMs. After 35 years in the heart of Silicon Valley, we understand the performance expectations of cutting-edge companies delivering disruptive technologies.

Quality Certifications: ISO 9001:2008 • ISO 13485:2003
MS. CARITA INC.     Booth # 442
Service Categories: Labels, Tapes & Decals • Pad Printing • Gaskets, Seals, Washers & O-rings • Nameplates, Dials & Panels • Packaging

We have been supporting customers with their labeling and panel overlay needs for over 40 years. We are very active in many business segments such as Medical Device, Biotech, Network / Telecommunications, Avionics and many others. Assisting Design & Manufacturing facilities looking for help with Labels, Nameplates, & Die-Cut items as well as Marketing Graphics.

NDT LABORATORIES LLC     Booth # 335
Service Categories: Testing - Non-Destructive • Calibration & Metrology

Providing Non-destructive Testing Services to the Aerospace, Defense, Medical Devices Manufacturing Industries. NDT Laboratories, LLC offers X-ray, Ultrasonic, Magnetic Particle and Fluorescent Penetrant Inspection for flaw detection for manufactured, process, and in-service components. Inspection of Welds, castings, forgings, machined parts etc.

Quality Certifications: LOCKHEED / NORTHRUP GRUMMAN • AS 9100 • NADCAP:NDT:ASTM • NADCAP: MPI, FPI
NORTH STATE FASTENER INC.     Booth # 419
Service Categories: Fasteners • Electronic Hardware • Timing Pulleys & Belts • Hoses, Clamps & Fittings • Threaded Parts

Since 1972 we have been providing fastening expertise and solutions to our customers around the world. We supply a wide range of fasteners including: standard and custom, inch and metric sizes, electronic hardware, precision mechanical components, and tools. Our fleet of trucks deliver throughout the San Francisco Bay Area. We offer same day delivery if stock is available.

PACIFIC METAL STAMPINGS INC.     Booth # 103
Service Categories: Stampings - Short Run • Stampings - Metal • Stampings - Ferrous & Non Ferrous • Prototypes - Stamping • Laser Cutting

Specializing in short run to high production. We use low cost, life time tooling produced on our CNC machining center & wire EDM machines, providing savings of 50 to 80% of conventional tooling. Components for hundreds of aerospace, automotive, medical & electronic customers. Sheet metal fabrication, laser cutting & prototype. Quotes are answered within 24 hours.



Quality Certifications: ISO 9001:2008
PEKO PRECISION PRODUCTS INC.     Booth # 230
Service Categories: Assemblies - Turnkey • Machining - CNC Milling & Turning • Fabricating - Sheet Metal • Systems Integration • Machinery - Design, Build & Rebuild

A Vertically Integrated Contract Manufacturer with four major divisions: CNC Machining: 85 turning & milling CNC machines; the largest is 106" x 161" x 42", Sheet Metal/Stamping with state-of-the-art equipment including robotic welding. Assembly Division: Assembly & test of top level OEM product/equipment. Systems Division: Design & build automated test & assembly equipment.



Quality Certifications: ISO 9001:2000 • ISO 13485 • AS 9100 • TUV / UL CERTIFIED
PENCO PRECISION INC.     Booth # 250
Service Categories: Machining - Production • Machining - Precision CNC • Machining - CNC Milling & Turning • Machining - Aluminum • Machining - Stainless Steel

We work with all industries including aerospace, computer, medical and high end commercial. Short to medium run lots and we also machine castings. Small to medium size parts. Maximum work piece: milling, 24" X 40" X 28"; turning, 11" X 32". 5,000 shop hours/month. 100% Woman Owned and Operated.



Quality Certifications: ISO 9001:2008 • AS9100C • ITAR REGISTERED • WBE
PETERSEN PRECISION ENGINEERING LLC     Booth # 117
Service Categories: Stampings - Fineblanked • Grinding - Creep Feed • Machining - Precision CNC • Grinding - I.D. & O.D. • Grinding - Double Disc

Complete precision metal part manufacturing service, offering fineblanking, CNC milling & turning, lapping, EDM, honing and grinding. Grinding includes double disc, blanchard, surface, cylindrical, centerless and creepfeed.



Quality Certifications: MIL-45208 • MIL-STD-105-E
PILLER-AIMMCO     Booth # 336
Service Categories: Plastics - Injection Molding • Tooling - Plastic Injection Molding • Plastics - Insert Injection Molding • Plastics - Elastomeric Overmolding • Prototypes - Plastic

Our combination of Design, Engineering, Tool Manufacturing & Injection Molding expertise offers clients a one-stop-shop from design to finished product. With fully equipped tooling and molding operations, both operating 3-shifts, we deliver unparalleled speed in bringing new products from concept to production. We are ISO certified & engineering driven.

Quality Certifications: ISO 9001:2008
PLASMA RUGGEDIZED SOLUTIONS     Booth # 228
Service Categories: Coatings - Conformal • Coatings - Physical Vapor Deposition • Potting & Encapsulation • Electronic Encapsulations • Engineering & Technical Services

The premier service provider for Conformal Coating, Potting, Encapsulating, Plasma Etchback/Desmear, Laboratory Services & BGA underfill, ESS testing, and ultrasonic cleaning. Our Northern and Southern California divisions provide rapid response, technical excellence and a problem-solving, “can-do” staff of professionals. From concept to integration, we are your solutions resource. RoHS Compliant.

Quality Certifications: AS 9100 • ISO 9001-2000 • ITAR • IPC
PLASTIKON - HANTEL     Booth # 301
Service Categories: Plastics - Injection Molding • Packaging • Tooling - Plastic Injection Molding • Prototypes - Plastic • Plastics - Thermoforming/Vacuum Forming

A full service supplier of custom engineered, plastic based products and a source for product design, rapid prototyping, contract manufacturing, and machining services in the Medical Industry.

Quality Certifications: ISO 8 CLASS 10K CLEAN ROOM • ISO 9001 / ISO 13485 • 13485 MEDICAL • ISO CLASS 7 CLEANROOM
PREMATECH ADVANCED CERAMICS     Booth # 349
Service Categories: Ceramic Parts • Machining - Ceramics • Grinding - Ceramics • Grinding - Carbide • Lapping

Machining & Precision Grinding of Advanced Ceramics including Silicon Carbide, Silicon Nitride, Sapphire, Alumina, Zirconia & other ultrahard materials. Offer prototype to production from your material or ours. Markets include semiconductor, defense, life science, power generation, research & general industrial. Complex & large shapes - no problem!



Quality Certifications: ISO 9001:2008 • ITAR • SAM • WBENC
PREPRODUCTION PLASTICS INC.     Booth # 128
Service Categories: Plastics - Structural Foam • Plastics - Injection Molding • Plastics - Painting • Assemblies - Turnkey • Tooling - Plastic Injection Molding

Full service, turnkey custom structural foam injection molder with in-house mold design, moldmaking, molding, finishing and assembly all under one roof.

Quality Certifications: ISO 9001:2008 • UL CERTIFIED
PROGRESSIVE CONCEPTS MACHINING     Booth # 435
Service Categories: Machining - Precision CNC • Machining - Production • Machining - CNC Milling & Turning • Welding & Weldments

A woman owned Bay Area precision CNC machine shop, PCM specializes in short and long run production. We are experienced in manufacturing parts and sub-assemblies for a wide-range of industries, including government, the semiconductor equipment, communications, & medical industries. We are actively pursuing our ISO 9001:2008 certification.

Quality Certifications: AWS-CWI
PROTOCAFE INC.     Booth # 207
Service Categories: Rapid Prototyping • Laser Cutting • Castings - Rubber Mold • CAD Design Services • Plastics - Low Volume

Full turnkey service bureau offering urethane casting/soft tooling, silicone parts, model finishing, laser cutting, 3D scanning, low volume production, CAD. We also have the finest resolution prototyping in the industry. Great for fine feature detail. DMLS, FDM, ABS, SLA, SLS, OBJET, translucent, flexible, high resolution, high temp, medical grade, Largest platform etc.

RAPID     Booth # 237
Service Categories: Prototypes - Rapid Sheet Metal • Prototypes - Machining • Assemblies - Cable • Machining - CNC Milling & Turning • Fabricating - Sheet Metal

We are a subtractive rapid prototyping manufacturer, specializing in quick-turn prototype and short-run production custom parts. RAPID’S core services include Rapid Sheet Metal - sheet metal fabrication services; Rapid Machining - CNC machining services; and Rapid Wire Cable - wire harnesses, cable assemblies, and electro-mechanical box build assemblies.



Quality Certifications: ISO 9001:2008 • ITAR REGISTERED
REDCO     Booth # 126
Service Categories: Rubber Rolls & Rollers • Rubber Molding • Gaskets, Seals, Washers & O-rings • Rubber - Transfer Molding • Die-Cutting

Proudly made in America since 1948. Your complete source for precision rollers, rubber molding, rubber extrusions, die cutting, foam fabricating & sub component assembly. We are your one stop source.



RH USA     Booth # 424
Service Categories: Assemblies - Turnkey • Assemblies - Electromechanical • Prototypes - Electromechanical

An FDA registered site for medical device manufacturing. Our core manufacturing technologies are laser and optic assemblies. RH USA takes pride in being a full turn-key partner.

Quality Certifications: FDA REGISTERED • ISO 13485 • ISO 9001
ROBERTS AUTOMATIC PRODUCTS INC.     Booth # 122
Service Categories: Screw Machining - Multi Spindle • Machining - CNC Milling & Turning • Machining - Precision CNC • Machining - Multi Axis • Screw Machining - Swiss/CNC Swiss

Offering precision production machining, featuring twin-spindle multi-tasking CNC turnmill centers and multi axis CNC cells, swiss, & multiple spindle screw machines.



Quality Certifications: ISO 9001:2008 • ITAR REGISTERED
RONCELLI PLASTICS     Booth # 245
Service Categories: Plastics - CNC Machining • Assemblies - Mechanical • Rapid Prototyping • Machining - Precision CNC • 3D Printing

Since 1969 we have specialized in Precision Fabrication, CNC Machining, Die Cutting, Rapid Prototyping and Clean Room Assembly of Plastic and Non-Metallic components. Ask about our 5 axis milling capabilities.

Quality Certifications: AS 9100C • ISO 9001:2008 • ISO 13485:2003 • ITAR REGISTERED
S & H RUBBER     Booth # 323
Service Categories: Rubber Molding • Extrusions - Rubber • Rubber Stampings • Rubber To Metal Bonding • Urethanes - Molded/Extruded

We specialize in custom molded, extruded and stamped rubber parts. We serve aerospace, automotive and many other industries. We work with many types of rubber including; Silicone, EPDM, Neoprene, Buna-Nitrile and Viton. ISO 9001:2008 and AS9100:2009 as well as a direct supplier to Boeing, Parker and other OEM Aerospace Co's.

Quality Certifications: ISO 9001 • AS 9100 • BOEING • ITAR
SCANDIC SPRINGS INC.     Booth # 324
Service Categories: Prototypes - Stamping • Stampings - Progressive Die • Stampings - Fourslide • Springs - Coil • Waterjet Cutting - Metal

A leading stamping & spring company specializing in quick-turn prototypes, custom metal stamping & CNC wireforming & laser and waterjet cutting.

Quality Certifications: ISO 9001:2015
SCHIPPERS & CREW INC.     Booth # 341
Service Categories: Assemblies - Printed Circuit Boards • Surface Mount Technology - Assembly • Assemblies - Turnkey • Cable & Wire Manufacturing • Inspection Services

We are an Electronics Manufacturing Services Company in Seattle, WA. We provide a full range of assembly services including SMT, Thru-hole, BGA, Cable, Test (ICT & JTAG) & X-Ray. Lead-free & Leaded. Our facility handles quantities from prototype up to volume production in both consigned & turnkey formats. Please contact us for a quote or tour!

Quality Certifications: ISO 9001 • ITAR • IPC-A-610
SEALING DEVICES INC.     Booth # 140
Service Categories: Gaskets, Seals, Washers & O-rings • Rubber - Injection Molding • Shielding - EMI/RFI • Die-Cutting • Adhesives

Manufacturer/fabricator of gaskets, O-rings, EMI shielding, adhesives, seals, custom molded rubber, and sponge parts. Also, compression, transfer and injection molding on-site. In-house tooling. Authorized Distributors for Parker Seal, Chomerics, Gore, 3M, Rogers, Garlock, Flexitallic & Loctite. Veteran Owned, Small Business & ITAR registered. seals@sealingdevices.com



Quality Certifications: AS 9100 REV C • ISO 9001:2008 • MIL-I-45208 • MIL STD 45662
SEAWAY PLASTICS ENGINEERING LLC     Booth # 231
Service Categories: Plastics - Injection Molding • Prototypes - Plastic • Plastics - Low Volume • Molds & Moldmaking - Plastic • Plastics - Painting

We are a full service plastic injection molding company specializing in prototype injection molding, low to mid volume production and mold making. We are headquartered in the Clearwater Beach/Tampa Bay area and have two manufacturing locations, Port Richey and Brooksville, Florida. Employing 160, Seaway strives to provide technology leadership and performance excellence to medical, aerospace, military, packaging, food service, industrial and consumer products.



Quality Certifications: ISO 13485:2003 / ISO 9001:2008 • ANSI/ASQ Q9001-2000 • ITAR REGISTERED • NADCAP ACCREDITED
SEVEN RANGES MFG. CORP.     Booth # 203
Service Categories: Stampings - Deep Drawn Shells • Stampings - Heavy Gauge • Stampings - High Volume • Stampings - Progressive Die • Tanks - Small Cylindrical

We are a 4 to 1 ratio deep drawn metal stamping house that is well diversified with carbon steel, stainless steel, aluminum, copper, & brass. We are known for heavy gauge, high volume stamping & can customize stamping jobs for medium volume, medium run & short run stamping jobs that will fit a customer's budget & time frame.



Quality Certifications: ISO 9001:2008 • DOD REGISTERED
SIGMADESIGN INC.     Booth # 404
Service Categories: Engineering & Technical Services • Electronics - New Product Development • Industrial Design Services • Mechanical & Electronic Design • Assemblies - Turnkey

We are a product design and engineering firm headquartered in Camas, WA. We offer professional services that support projects from concept through production. The firm serves clients from multiple U.S. and worldwide locations. In-house services include Industrial Design, Mechanical, Electrical, Firmware and Software Engineering, Prototyping, Machining, Testing and Mfg.

Quality Certifications: ITAR
SKS DIE CASTING & MACHINING INC.     Booth # 254
Service Categories: Castings - Die, Aluminum • Machining - Precision CNC • Tools, Dies & Fixtures • Castings - Die, Zinc

Aluminum, zinc & brass die casting & finishing company, supplying precision-machined components. The company has complete in-house CAD/CAM die design capabilities.

Quality Certifications: ISO 9002
SMART PRODUCTS     Booth # 102
Service Categories: Valves & Controls • Pumps & Reservoirs

Designs & manufactures an extensive family of check valves, pressure relief valves, pumps, & related components for advanced low pressure, low flow applications.



Quality Certifications: ISO 9001:2008
SNA ELECTRONICS INC.     Booth # 436
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Electronic • Assemblies - Mechanical • Wire & Cable Harnesses • Prototypes - Electronic

Electronics Manufacturing Services including: PCB Assembly & PCB Fabrication, System Integration, Cable Assembly, Plastics, Sheet Metal, Rework/RMA Support, Box, Labels, Accessory, Final Package Support & BGA Rework. Consignment/Turnkey/Combination.

Quality Certifications: ISO 9001:2008 • ISO 13485:2003 • AS 9100C:2009
SPECCOAT     Booth # 244
Service Categories: Coatings - Conformal • Coatings - Physical Vapor Deposition • Coatings - Polyurethane • Potting & Encapsulation • Electronic Encapsulations

Provides conformal coating and potting of printed circuit boards. Urethane, Acrylics, Silicone, Parylene, Epoxies and Nano coating. Industries include: Military, Medical, Aerospace, Space, and Industrial. Minor sub-assembly and soldering.

Quality Certifications: ISO 9001:2008 • AS 9100 REV D • ITAR • ANSI ESD S20.20-2007
STOCK DRIVE PRODUCTS/STERLING INSTRUMENT     Booth # 352
Service Categories: Timing Pulleys & Belts • Gears • Gearboxes • Machining - Precision CNC • Screw Machining - Swiss/CNC Swiss

We make high-quality, high-precision small mechanical components and assemblies for critical motion control applications. Whether you need custom design and manufacturing to meet your requirements or a standard catalog item we can meet your needs. Standard components available include timing belts, pulleys, precision gears, bearings, couplings and many more.

Quality Certifications: ISO 9001 • AS9100 • Boeing BQMS Certified
STREAMLINE ELECTRONICS MFG. INC. (SEM)     Booth # 325
Service Categories: Assemblies - Electronic • Assemblies - Turnkey • Prototypes - Electronic • Assemblies - Electromechanical • Electronics - New Product Development

Founded in 1994 and headquartered in Fremont, CA, SEM is a full-service product development and electronics manufacturing services company. SEM specializes in highly complex electronic assemblies. ISO 13485 & RoHS Compliant. Visit us at www.sem-inc.com.

Quality Certifications: ISO 9001: 2008 CERTIFIED
SURFACE FINISHES     Booth # 105
Service Categories: Optical Polishing • Lapping • Machining - Single Point Diamond • Grinding - I.D. & O.D. • Honing

Precision Finishing, Fabrication and Refurbishment Services, Chemical Mechanical Polishing, Optical Quality Polishing, Precision Lapping, Single Point Diamond Machining, Precision Low Stress Grinding, Precision Honing - Large and Small Bore. See our website for typical results.



Quality Certifications: ITAR REGISTERED
SWISSOMATION INC.     Booth # 216
Service Categories: Screw Machining - Swiss/CNC Swiss • Machining - Miniature Precision • Machining - Precision CNC • Plastics - Screw Machining • Screw Machining - Escomatics

Features a wide range of high quality production capabilities to meet your CNC machining needs on time & at competitive prices. Our experienced staff can set up & produce your parts on our Citizen Swiss CNC Screw Machines or our CNC Machining Centers. Our prototype department includes rapid prototyping capabilities to help you finalize your design. ISO 9001 Compliant. Also located at 254 Industrial Park Dr. Amherst, VA 24521 Phone: 434-946-7360.



Quality Certifications: SPC • PPAP's
TAICA NORTH AMERICA CORP.     Booth # 248
Service Categories: Silicone / Rubber - Liquid Injection Molding • Rubber Molding • Rubber To Metal Bonding • Bushings • Heat Sinks

Manufacturer of Alpha-GEL brand silicone parts & components for many applications: Anti-vibration parts, Shock-absorbing materials, Thermally Conductive Pads & Paste. Alpha-GEL is soft, highly-durable, environmentally-friendly silicone that can be used over a wide temperature range (-40 C to +200 C). Visit us at www.taica-na.com

Quality Certifications: ISO 9001 • RoHS • UL 746 D • JIS/DTS
TEMPCO MFG. CO. INC.     Booth # 252
Service Categories: Stampings - Metal • Fabricating - Sheet Metal • Assemblies - Mechanical • Welding & Weldments • Tools, Dies & Fixtures

With over 70 years of experience, Tempco produces precision metal stampings, precision sheet metal fabrications and mechanical assemblies for clients across numerous industries. Tempco offers a complete tool & die room to go along with secondary services to be your one stop shop for metal stampings and sheet metal fabrications.



Quality Certifications: AS9100C • ISO 9001:2008
THERMO COOL     Booth # 423
Service Categories: Heat Sinks • Extrusions - Aluminum • Castings - Die, Aluminum • Stampings - Progressive Die • Forgings - Cold

We manufacture custom heat sinks. Aluminum extrusions, copper heat pipes, skived fins, snapped fins, bonded fins, cold forging and die casting. Secondary processes, including CNC machining, anodizing, bead blasting, interface materials, and screw/spring attachment hardware. Prototypes to full production Thermal engineering services: Design & CFD simulations.

Quality Certifications: ISO 9001:2008
TOP TOOL CO.     Booth # 432
Service Categories: Stampings - Micro-Miniature • Prototypes - Stamping • EDM - Wire • Tools, Dies & Fixtures • Stampings - Progressive Die

Specializes in creating tooling and complex precision components down to the µm level for world-class companies.

Quality Certifications: ISO 13485:2003 • ISO 9001:2008 • ITAR
TPI-ARCADE INC.     Booth # 239
Service Categories: Castings - Aluminum • Castings - Sand & Shell • Castings - Sand

The most advanced Aluminum V-Process casting facility in the US. Twice as accurate and smooth as common sand castings, .125" wall thickness, 0° draft and unlimited pattern life are a few advantages. We pride ourselves on speed to market with samples in 2-3 weeks. Let us be your prototype and production foundry.

Quality Certifications: AS9100C • ITAR REGISTERED
TUTCO     Booth # 315
Service Categories: Industrial Equipment • Assemblies - Electrical • Fans & Blowers

The world's largest supplier of open coil heating elements. We produce 35,000 to 38,000 heaters a day to meet the demands of our OEM customers. Leading the world in heating innovation, Tutco holds 80% of the U.S. Patents in open coil heating technology. Tutco heating components can be found in countless commercial applications, including refrigeration, HVAC, appliance, lab equipment and vending. We can quickly bring your project from concept to completion.

Quality Certifications: ISO 9001:2008 • ISO 14001:2004 • OHSAS 18001:2007
ULTIMATE 3D LLC     Booth # 443
Service Categories: 3D Printing • Assemblies - Mechanical • CAD Design Services • Jigs & Fixtures

An Oregon-based 3D printing, manufacturing, and engineering company with in-house 3D Print capabilities specializing in SLS. We can handle your prototyping to production runs of up to 30,000 parts with post processing available including Tumble Polish, Hand Sanding, Nickel Plating, Dying, Painting and Assembly.

USA SEALING     Booth # 453
Service Categories: Gaskets, Seals, Washers & O-rings

Specializes in O-rings, hydraulic seals & raw materials used in sealing applications. At USA Sealing we offer in-stock, all standard O-ring sizes in over a dozen materials and have over 5,000 metric sizes in Buna-N, Viton, Silicone & EPDM. We also stock hydraulic seals such as rod seals, piston seals & wipers along with a vast selection of sponge rubber to fit your needs.

VECO USA     Booth # 208
Service Categories: Electroforming • Chemical Milling • Photochemical Etching & Machining • Shielding - EMI/RFI • Optical Components

Pushing the boundaries of Micro-Precision Parts since 1934, we are your one source for all your precision Metal Parts & Component needs. Using Veco's core technologies of Photo Electroforming and/or Photo Etching, along with our precision Micro Laser capabilities, we are committed to helping you create dependable products. Transforming ideas into reality!



Quality Certifications: ISO 9001:2000 • ISO 14001:1996 • TS 16949 • OHSAS 18001
WEST VALLEY PRECISION INC.     Booth # 326
Service Categories: Machining - CNC Milling & Turning • Machining - Production • Prototypes - Machining

Facility with large capacity full 5 axis machining, multi pallet horizontal milling, CNC lathes & Swiss Screw machines. Providing prototype through production machining for all industries.

WILLIAMS MANUFACTURING     Booth # 332
Service Categories: Welding & Weldments • Machining - Precision CNC • Engineering & Technical Services • Fabricating - Stainless Steel • Fabricating - Sheet Metal

A full service Metal Fabrication facility with the ability to produce tight tolerances, quality products and on time deliveries unsurpassed in the industry. With over 40 years of experience, we are confident that our customers will have a professional business experience. We look forward to serving all industries for any size project. ISO Compliant

WRIGHT ENGINEERED PLASTICS INC.     Booth # 321
Service Categories: Plastics - Injection Molding • Plastics - Insert Injection Molding • Plastics - Elastomeric Overmolding • Plastics - In Mold Labeling & Decorating • Assemblies - Turnkey

San Francisco Bay Area provider of injection molding & assembly services, including clean environment rooms for molding & assembly, insert or overmolding, decorating and final packaging. First Green Certified manufacturer in Northern California. In-house tool. Outstanding DFM support. All parts made in Santa Rosa, CA.

Quality Certifications: ISO 9001:2008 • ISO 13485:2012 • FDA REGISTERED • ITAR REGISTERED
Y. C. CABLE USA INC.     Booth # 354
Service Categories: Wire & Cable Harnesses • Plastics - Insert Injection Molding • Cable & Wire Manufacturing • Assemblies - Electronic

An industry leader in the cable assembly market. We have four U.S. locations and three international locations to provide service from. Also UL and CSA certified. With our diverse manufacturing capabilities, our cables can be found in industrial, computer, telecommunications, consumer, medical and RF markets. TS16949; FDA Registered. Also featuring SMD Inc.

Quality Certifications: ISO 9001:2000 • IPC/WHMA-A-620 • UL CERTIFIED • RoHS
ZEISS INDUSTRIAL METROLOGY     Booth # 125
Service Categories: Measurement & Inspection • Measurement - Equipment • Measurement - Software

We are the world's leader in CNC coordinate measuring machines (CMMs) & complete solutions for multidimensional metrology in the metrology lab & production.





© 2017 The Job Shop Company • 16 Waterbury Road, Prospect, CT 06712 • (800) 225-4535