Greater Ohio Design-2-Part Show
October 24 & 25, 2018
John S. Knight Center • Akron, OH



Search by Category

or

Search by Keywords


  Reset Search  



0 Exhibitors to Meet

Exhibitor List


Listed below are the current exhibitors and service categories of companies in the show.
This page is also an interactive tool for you to use when planning your personal visit.

[ 167 ] companies match your search.
FEATURED EXHIBITORS listed first alphabetically
ACE WIRE SPRING & FORM CO. INC.     Booth # 134
Service Categories: Springs - Coil • Wire Forming & Fabricating • Wire Straightening • Assemblies - Mechanical • Hooks

CUSTOM "Spring & Wire Form Specialists" – Incorporating the newest CNC equipment technology to manufacture compression, extension, torsion springs, complex wire forms, and spring assemblies. Consistent quality, lower costs, on-time deliveries, and Design Engineering Assistance. Prototypes to production - Family owned & operated since 1939. Let ACE be your problem solver.

www.acewirespring.com

Quality Certifications: ISO 9001:2015 ITAR REGISTERED • MIL-SPEC 45208
ACRO INDUSTRIES LLC     Booth # 526
Service Categories: Fabricating - Sheet Metal • Assemblies - Honeycomb • Laminating • Stampings - Metal • Stampings - Progressive Die

Offers expertise in full service Contract Manufacturing, Product Design, Engineering, Supply Chain Management, System/Module Assemblies, Production Stamping, Laser & Short Run Fabrication and Custom Laminate Panel Fabrications.

www.acroind.com

Quality Certifications: ISO 9001:2015 REGISTERED • ITAR
ACTIVE MFG.     Booth # 519
Service Categories: Prototypes - Stamping • Stampings - Short Run • Assemblies - Stamped • Springs - Flat • Machining - CNC Milling & Turning

We specialize in prototype and short run stampings, springs, clips and assemblies using CNC mills, 6 axis CO2 and fiber lasers, wire EDM, servo, mechanical and hydraulic presses up to 220 tons, Mig, Tig, laser, spot and micro spot welding along with radial riveting. Please give us an opportunity to earn your business.

www.activemfg.net

Quality Certifications: ISO 9001:2015 • ITAR
ADRON TOOL CORP.     Booth # 131
Service Categories: EDM • EDM - Wire • EDM - Sinker • EDM - Small Hole Drilling • Machining - Production

Wire EDM specialists with over 50 CNC mach., CNC (sinker) std. EDM; largest capacity, 40"x32"x18", workpiece wt. 10,000 lbs., 27-1/2" thick; metal parts rapid prototyping svc. and prod. runs of complex, contoured shapes in tough to mach. or exotic mtl.; CNC production machining, coord. measuring sys., SPC, OGP optical non-contact measuring.

www.adron.com

Quality Certifications: ISO 9001:2008 • AS 9100 • NADCAP AS7116
ADVANCED CONTROLS & DISTRIBUTION     Booth # 604
Service Categories: Automation • Sensors • Industrial Supplies • Motion Control • Safety Products & Components

A technology leading, full-line distributor of industrial electrical supplies serving an extensive network of vendors and customers. At Advanced Controls and Distribution (ACD), our goal is to provide exceptional service and technical support to ensure the success of our customers be they OEMs, Integrators, Solution Providers or End-Users.

www.acdist.com

ASH INDUSTRIES     Booth # 137
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Plastics - Rotational Molding • Plastics - Hot Stamping & Screening • Prototypes - Plastic

Engineered for You. In-House MIM, Thermoplastic, and Silicone Injection & Rotational Molding & Tooling as well as cast epoxy components & 7-Axis Swiss Lathe production. Molding includes custom inserts & over-molding, two shot molding. Component assembly, secondary processing & decorating, utilizing the latest in CNC, EDM & Modeling technology.

www.ashindustries.com

Quality Certifications: ISO 9001 • ISO 7 CLASS 10K CLEAN ROOM
BOHN AND DAWSON     Booth # 618
Service Categories: Tube Bending & Fabricating • Welding - Robotic • Racks • Tubular Parts - Die Swaged

A High Volume Metal Tubing Fabricator, providing parts and welded assemblies for OEM Manufacturers in the Outdoor Power, Agricultural, Automotive, Furniture and Off Road Recreational Vehicle Market.

www.bdiweldedtubing.com

Quality Certifications: ISO 9001:2015
C & A TOOL & ENGINEERING     Booth # 307
Service Categories: Machining - CNC Milling & Turning • Assemblies - Mechanical • Grinding • EDM • 3D Printing

Large job shop offering Milling, Turning, Grinding, EDM, Direct Metal Laser Sintering, Polishing, Gun Drilling, Ball Grinding & other machining operations.

www.catool.com

Quality Certifications: AS 9100 • ISO 13485 • ISO 9001:2000 • TS 16949
C&J INDUSTRIES     Booth # 409
Service Categories: Plastics - Injection Molding • Tooling - Plastic Injection Molding • Molds & Moldmaking - Plastic • Assemblies • Prototypes - Plastic

We are your single source for plastic injection molding and contract manufacturing. With 55 presses and state-of-the-art 3D additive manufacturing machines, C&J has the leading-edge technology to reduce customers' time to market. Combined with our in-house tool shop and unique 10-Year warranty, C&J can rapidly develop prototypes into commercial reality.

www.cjindustries.com

Quality Certifications: UL CERTIFIED • ISO 9001:2015 • ISO 13485:2016 • FDA REGISTERED
CHEMENCE     Booth # 626
Service Categories: Adhesives • Potting & Encapsulation • Fasteners • Coatings • Electronic Encapsulations

A specialty chemical manufacturer with manufacturing sites in North America and Europe and sales offices in North America, Europe and Asia. Chemence supplies adhesives and sealants to markets ranging from wound closure to industrial assembly.

www.chemence.com

Quality Certifications: ISO 9001:2015 CERTIFIED
CLEVELAND STEEL TOOL     Booth # 630
Service Categories: Prototypes - Machining • Tooling • Tools, Dies & Fixtures • Machining • Machining - CNC Milling & Turning

With 110 years supplying the Metalworking Industry, we specialize in rapid turnaround of high mix and high volume applications. We offer Solidworks design, turning, milling, grinding, laser engraving, inspection and packaging services. Our ISO 9001:2015 certification means a commitment to continuous improvement, to reduce your costs and improve your time to market.

www.clevelandsteeltool.com

Quality Certifications: ISO 9001:2015
CR METAL PRODUCTS     Booth # 130
Service Categories: Fabricating - Sheet Metal • Powder Coating • Laser Cutting • Welding - Robotic • Screen Printing

A custom metal fabrication facility/contract manufacturer specializing in precision sheet metal fabrication, powder coated finishes, & silkscreening.

www.crmetal.com

Quality Certifications: ISO 9001:2008
DAJAC INC.     Booth # 505
Service Categories: Electronics - New Product Development • Engineering & Technical Services • Instrumentation & Controls • Reverse Engineering • Systems Integration

An engineering based company that has provided contract electronics hardware and software design services for two decades. Dajac (pronounced “day-jack”) has obtained a great deal of knowledge through experience in a large array of projects and we put that to work for customers via best in class design processes and procedures. Let us take your ideas to the next level!

www.dajac.com/contract_engineering.php

DAVID WOLFE DESIGN INC.     Booth # 623
Service Categories: CAD Design Services • Reverse Engineering • Plastics - Low Volume • Machining - CNC Milling & Turning • Molds & Moldmaking - Plastic

Contract services to the plastics industry. Services include product design and development, prototyping, short run production, molding, tooling, CNC machining and mold components.

www.davidwolfedesign.com

DAYTON ROGERS MFG. CO.      Booth # 102
Service Categories: Stampings - Metal • Fabricating - Sheet Metal • Assemblies - Stamped • Stampings - Short Run • Rapid Prototyping

"We provide metal forming solutions to industry." Modular tooling/progressive metal stampings, metal fabrication, welded assemblies, prototypes, drawn shapes, complete tool & die facility. All secondary operations. Four locations to serve you.

www.daytonrogers.com

Quality Certifications: ISO 9001:2008 • AS 9100 • ITAR
DB ROBERTS     Booth # 110
Service Categories: Fasteners • Electronic Hardware • Assembly Hardware • Levers, Knobs & Handles • Masking

Since our inception, we have been focused on providing solutions for fastener applications in Sheet Metal Fabrication, Metalworking, and Industrial Electronics. Our "Superior Customer Service" and "Commitment to Excellence" have proven to be a winning formula fueling innovation and rapid growth year after year.

www.dbroberts.com

Quality Certifications: ISO 9001:2015 • AS 9120B
DESIGN-2-PART MEDIA     Booth # 000
Service Categories: Publications

Published since 1984, Design-2-Part Magazine is one of the country's oldest publications specifically devoted to showcasing manufacturing companies who specialize in helping OEM's take their product from design to part.

www.reachengineers.com

DYNAMIC STAMPINGS INC.     Booth # 108
Service Categories: Stampings - Short Run • Stampings - Metal • Fabricating - Sheet Metal • Fabricating - Stainless Steel • Laser Cutting

One-Stop Shop for Low Volume metal stampings (100 - 10,000 pieces). Hard tooled die sets start at just $185.00. One-Time tool charge for the Life-Of-The-Part. RFQs quoted complete to print within 48 hours. All metals .010" to .250" thick.

www.dynamicstampings.com

EAC PRODUCT DEVELOPMENT SOLUTIONS     Booth # 222
Service Categories: Engineering & Technical Services • CAD Design Services • CAD/CAM Training • 3D Printing • CAD/CAM Software

We transform the way companies design, manufacture, connect to, and service their products. We offer world-class tools & services to help organizations get successful products to market faster. These tools & services include world-class Engineering and Design Services and industry leading PTC Creo CAD software.

www.eacpds.com

ELECTRA USA INC.     Booth # 504
Service Categories: Locks • Hinges • Gaskets, Seals, Washers & O-rings • Stainless Steel - Materials • Assembly Hardware

We produce Electronic Locking Systems, Commercial, Industrial and Heavy Duty locks, padlocks, hinges, handles, gaskets and accessories. Applications include generators, transformers, metal furniture, electrical panels, servers, telecommunication and communication cabinets, cars, trucks, recreational vehicles etc.

www.polyhardware.com

Quality Certifications: RoHS / REACH • ISO 9001: 2008 CERTIFIED
ENGINEERING RESOURCE CENTER     Booth # 606
Service Categories: Prototypes - Plastic • Tooling - Plastic Injection Molding • Tooling - Models & Prototypes • Plastics - Low Volume • Molds & Moldmaking - Plastic

At The ERC, we believe that tooling costs should not stand in the way of developing great products. Our unique, inexpensive tooling solutions allow us to offer globally competitive pricing on plastic prototypes and custom injection molds - right here in the USA!

www.theerc.com

FOX VALLEY SPRING LLC     Booth # 103
Service Categories: Springs - Coil • Springs - Flat • Wire Forming & Fabricating • Stampings - Fourslide • Stampings - Short Run

Manufacturer of custom springs, wire forms and metal forms. We utilize SPC systems, CNC coilers and experienced craftsmen to assure consistent quality. Design assistance and rush orders are welcome. Wisconsin Grand Manufacturer of the Year. We Quality Certify each process & provide a total Value-added supplier package. 10 piece minimum for custom spring and wire forms.

www.foxvalleyspring.com

Quality Certifications: ISO 9001:2008 • ITAR CERTIFIED
G & W MACHINERY SALES     Booth # 508
Service Categories: Waterjet Cutting - Machinery • 3D Printing • CAD/CAM Software • EDM • Laser Cutting

Machine Tool Distributor offering full service and support for OMAX Abrasive Water Jet, Sodick EDM and Hybrid 3D Metal Printer, Laser Americas Laser Cutting and Laser Etching, Procuttech 5 Axis Micro Machining, Komatsu Plasma. CAD/CAM software: JetWorks - 5 Axis Water Jet, CIMWorks - Multi Axis Wire EDM, Milling and Turning, JetCAM - Nesting for Water Jet, Laser & Plasma.

www.gwmachinery.com

HARDWARE SPECIALTY CO. INC.     Booth # 214
Service Categories: Fasteners • Electronic Hardware • Adhesives • Assemblies - Electrical • Assembly Hardware

Our SAE AS9120 Registered Quality Management System and full service Quality Assurance facilities coupled with many years of technical sales experience and deep product line inventory ensure our commitment to total customer satisfaction. Together these make Hardware Specialty an unbeatable source for all your fastener and electronic component requirements.

www.hardwarespecialty.com

Quality Certifications: SAE AS9120 • ISO 9001:2008 • ISO 14001 • MIL-STD-45662A
HILER INDUSTRIES     Booth # 611
Service Categories: Castings - Sand & Shell • Castings - Gray Iron • Castings - Ductile Iron • Castings - Ferrous • Machining - Castings

Produces quality gray, white and ductile iron castings exclusively in the shell molding process. Castings sizes range from a 1 lb to over 50 lbs. Value-added metal-casting services include machining, paint, HT and light assembly. Our pattern shop can produce patterns up to 16"x24". Outstanding quality and on-time delivery.

www.hilerindustries.com

Quality Certifications: ISO 9001:2015 • IATF 16949:2016
IER FUJIKURA INC.     Booth # 425
Service Categories: Rubber - Injection Molding • Plastics - Elastomeric Overmolding • Rubber - Compression Molding • Rubber - Transfer Molding • Rubber Molding

One of the first molders of fluoroelastomers, IER Fujikura has been the leader in the technical culture of synthetic elastomers. IER Fujikura’s core capabilities include custom-molded rubber gaskets and seals; insert-molded, thermoset-bonded, Viton® and Fluorosilicone seals; Perfluorelastomer seals; engineered sealing designs; and rubber compounds.

www.ierfujikura.com

Quality Certifications: ISO 9001 • IATF 16949 • A2LA ACCREDITED ISO 17025
INDIANA PRECISION GRINDING     Booth # 521
Service Categories: Grinding - Precision • Grinding - I.D. & O.D. • Grinding - Centerless • Grinding - Surface • Grinding - Carbide

Provides customer-centric solutions to the manufacturing, aerospace, and thermal spray coating industries. IPG offers a full variety of CNC Cylindrical, Centerless, Vertical Universal, and Surface Grinding services. Precision and Quality are the catalysts that drive our professional and experienced team to position all our customers toward success.

www.indianaprecisiongrinding.com

Quality Certifications: AS 9100D, ISO 9001:2008 • ROLLS ROYCE • BELL HELICOPTER APPROVED
JERPBAK BAYLESS CO.     Booth # 413
Service Categories: Machining - CNC Milling & Turning • Machining - Large Parts • Machining - Exotic Materials • Machining - Stainless Steel • Machining - Castings

Full service PRECISION contract machine shop. With our 5 ton cranes we can accommodate a large variety of parts. Jerpbak Bayless specialties include: long shafts, acme threads, parts with unique helical forms and rectangular parts that fit in a 500mm or 1000mm cube. Please look us up at www.jerpbakbayless.com for a more complete picture. Email: scott@jerpbakbayless.com

www.jerpbakbayless.com

Quality Certifications: MIL-45208A
LEWIS-BAWOL WELDING     Booth # 605
Service Categories: Welding - Laser • Welding & Weldments • Welding - TIG Aluminum • Plastics - Micro Molding • Molds & Moldmaking - Metal

A pioneer in the art of laser and microscopic TIG welding. Lewis-Bawol Welding has been specializing in precision tool, die, and injection mold welding since 1954.

www.lewisbawol.com

M2M MACHINING INC.     Booth # 619
Service Categories: Machining - Precision CNC • Machining - CNC Milling & Turning • Machining - Castings • Machining - Multi Axis • Machining - Stainless Steel

A CNC production shop, focused on both High Volume production of castings & forgings; and low rate production-high mix of complex precision components. With over 60 CNC's on our floor, we can handle a wide variety of parts. Capable in VTL turning, 5-axis Milling, Horizontal Milling, and more. We can handle part sizes up to 30" in diameter.

www.model2machine.com

Quality Certifications: AS 9100 REV D • ISO 9001:2015 • ITAR REGISTERED
MYERS PRECISION GRINDING     Booth # 313
Service Categories: Thread Grinding • Grinding - I.D. & O.D. • Grinding - Centerless • Machining - CNC Milling & Turning • Grinding - Surface

International Grinding, Centerless Grinding, and Myers Precision Grinding are focused on being a reliable ISO 9001 supplier of ID, OD, centerless, surface, and thread grinding solutions for our customers countrywide. Our customers are component manufacturers in the gear, transmission and powers systems in aviation, automotive, medical and energy industries.

www.myersprecision.com

Quality Certifications: ISO 9001:2015
NOVATHANE     Booth # 414
Service Categories: Rubber - Polyurethane Molding • Polyurethane - Parts • Rubber Molding • Gaskets, Seals, Washers & O-rings • Polyurethane - Rollers

A specialist in the molding of urethane polymers. Common products include urethane bushings, v-rollers, and bearings, although we can create a custom molding solution to meet your specific needs and requirements. For inquiries please visit the company website at www.novathanedirect.com or call 419-877-3306.

www.novathanedirect.com

PACE ELECTRONICS     Booth # 622
Service Categories: Assemblies - Turnkey • Assemblies - Electronic • Surface Mount Technology - Assembly • Plastics - Insert Injection Molding • Electronic Components

A global contract manufacturing services company, offering high quality, cost effective assemblies. We can help take your product from design to production. Our capabilities include global sourcing of components, PCB assembly, injection molded plastics, wire harnesses, testing, packaging, and logistics. We also offer design engineering services.

www.paceelectronics.com

Quality Certifications: ISO 9001:2015 • ETL • RoHS • UL APPROVED
PENN STAINLESS PRODUCTS      Booth # 523
Service Categories: Stainless Steel - Materials • Fabricating - Stainless Steel • Waterjet Cutting - Metal • Laser Cutting • Cutting - High Definition Plasma

We are a full line distributor and processor of stainless steel sheet, plate, bar, structural, pipe and tubular products. Stainless grades include high-temperature, corrosion, Duplex and PH alloys. Services include leveling, coil processing, plate shearing, sheet shearing, plasma, HQ plasma, plate laser cutting and dynamic waterjet, as well as machine, saw and Amada production cutting.

www.pennstainless.com

Quality Certifications: ISO 9001:2015
PINE ELECTRONICS INC.     Booth # 610
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Electromechanical • Assemblies - Electronic • Assemblies - Turnkey • Assemblies - Cable

Specializing in low-mid volume electronics manufacturing services, Pine Electronics offers a wide range of PCB assembly, cable and box build assembly solutions. Serving the industrial market since 1962, Pine's quality work can be found in a variety of applications, including mass transit, materials testing, electrochemistry, lift equipment, switch sensors and many more.

www.pineelectronics.com

Quality Certifications: ISO 9001:2015 CERTIFIED • IPC-A-610 • IPC/WHMA-A-620
PRECISION MFG. CO. INC.     Booth # 525
Service Categories: Wire & Cable Harnesses • Assemblies - Electromechanical • Assemblies - Electrical • Assemblies - Electronic • Prototypes - Electronic

A world class provider of electro-mechanical control boxes and wire harnesses. We have the very best in equipment and a highly trained workforce. Precision is capable of handling small prototype orders to million piece runs. We have a wide customer base; military, heavy equipment, fire protection, medical, and much more.

www.precmfgco.com

Quality Certifications: WHMA IPC-A-620 • J-STD-001 CLASS 3 • ISO 9001:2015
RECTO MOLDED PRODUCTS/LEGACY EXTRUSIONS     Booth # 403
Service Categories: Plastics - Injection Molding • Plastics - Extruded Profiles • Plastics - Insert Injection Molding • Tools, Dies & Fixtures • Pad Printing

Recto Molded Products, a custom thermoplastic injection molder established in 1919 with 26 molding presses from 33 to 500 Ton. Legacy Extrusions, a custom profile extruder since 1996 with 6 extrusion lines. Assembly, decorating, 3D Printing and Packaging Capabilities. Engineering and Design assistance. No volume too small or too large.

www.rectomolded.com

SLICE MFG. STUDIOS     Booth # 602
Service Categories: Machining - Precision CNC • 3D Printing • Rapid Prototyping • EDM - Wire • Engineering & Technical Services

A 40K sq. ft., full-spectrum manufacturing facility with integrated science laboratories offering support to customers from beginning to end, i.e., design, development, prototyping, mechanical testing, final production, sterile cleaning (Class 10K) and sterile packing (Class 1K). Slice Mfg. Studios is also a pioneer in 3D Printing/Advanced Mfg. ISO 13485 and FDA Registered.

www.slicemfg.com

Quality Certifications: 13485 • FDA REGISTERED • CLASS 10K CLEAN ROOM
SMALLEY     Booth # 116
Service Categories: Snap Rings & Retaining Rings • Springs - Coil • Springs - Wave • Springs - Flat • Fasteners

We are the exclusive manufacturer of the industry-leading Spirolox® Retaining Rings, an innovative design that features a no gap, 360° retaining surface without protruding ears to interfere with mating components. We are also the originator of Crest to Crest® Wave Springs which save up to 50% of space compared to conventional coil springs.

www.smalley.com

Quality Certifications: ISO 9001 & ISO 13485 • IATF 16949 • AS 9100 • ISO 14001
STANDARD PRECISION MFG. INC.     Booth # 601
Service Categories: Tooling • Machining • Tools, Dies & Fixtures • Machining - CNC Milling & Turning • Machining - Precision CNC

Established in 1984 as a mold and die tooling supplier, Standard Precision has since grown into a full-service precision tooling and machining firm with over twenty employees working two shifts in 19,000 square feet of manufacturing space. Our mission is to be our customers' most trusted and preferred source for precision tooling and machined components.

www.standardprecisionmfg.com

TRIANGLE PRECISION INDUSTRIES INC.     Booth # 109
Service Categories: Prototypes - Machining • Prototypes - Fabrication • Machining - CNC Milling & Turning • EDM • Welding & Weldments

Engineering prototypes & low volume production for precision machined parts, machined & formed combinations & precision fabrications, state-of-the-art laser cutting & water jet cutting, laser marking, conventional & 5 Axis CNC machining, precision CNC turning & Swiss turning, wire & sinker EDM, press brake forming, welding. Coordinate measuring machines for inspection. Contact Harold A. Brown.

www.triangleprecision.com

Quality Certifications: ISO 9001:2015 • AS 9100D
TUTCO     Booth # 418
Service Categories: Heating Elements - Custom • Heating Elements - Electric • Heaters - Custom • Assemblies - Electrical • Fans & Blowers

The world's largest supplier of open coil heating elements. We produce 35,000 to 38,000 heaters a day to meet the demands of our OEM customers. Leading the world in heating innovation, Tutco holds 80% of the U.S. Patents in open coil heating technology. Tutco heating components can be found in countless commercial applications, including refrigeration, HVAC, appliance, lab equipment and vending. We can quickly bring your project from concept to completion.

www.farnam-custom.com

Quality Certifications: ISO 9001:2008 • ISO 14001:2004 • OHSAS 18001:2007
ULTIMAKER - DESIGN BOX 3D     Booth # 411
Service Categories: 3D Printing • Rapid Prototyping • Rapid Prototyping - Equipment

Ultimaker and DesignBox 3D share the vision to make 3D printing accessible to all. It is why all of our desktop printers are extremely quiet, fast, accurate, reliable and effortless to use, embraced by professionals and novices alike. Ultimaker is one of the most successful and reliable open source 3D printing companies in the world.

www.designbox3d.com

ULTRATECH TOOL AND DESIGN     Booth # 416
Service Categories: Stampings - Metal • Stampings - High Volume • Stampings - Progressive Die • Stampings - Deep Drawn Shells • Stampings - Ferrous & Non Ferrous

A world class contract manufacturer supplying customers with turnkey solutions to stampings from prototype to production worldwide. Presses from 32 - 600 tons of capacity, feed lines up to 60" wide and 40,000 lbs. Value added features include in-die tapping & nut/stud insertion, assembly and welding. IATF 16949 Certified. Manufacturing At Its Finest!

www.ultratechtooldesign.com

Quality Certifications: IATF 16949
ACCU-FORM POLYMERS     Booth # 503
Service Categories: Plastics - Rotational Molding • Plastics - Thermoforming/Vacuum Forming • Plastics - Injection Molding • Assemblies • Fabricating - Plastic

We manufacture a wide range of highly aesthetic plastic products for a worldwide client base. We have the experience and the understanding of our processes, coupled with the energy to innovate. Since 1989, we have provided our customers with competitive costs, highest quality molding and assembly services, with on-time delivery and outstanding customer service.

ACIETA     Booth # 620
Service Categories: Robotics • Welding - Robotic • Machining - Robotic • Fabricating - Sheet Metal • Deburring

We provide a wide range of cutting-edge robotically automated solutions and services customized for the unique needs of manufacturing applications. For the last 35 years, we have integrated more than 4,500 automation systems for customers across North America by solving challenges such as lowering costs, increasing productivity and addressing labor shortfalls.

Quality Certifications: SME
ADCRAFT DECALS     Booth # 415
Service Categories: Screen Printing • Labels, Tapes & Decals • Nameplates, Dials & Panels • Die-Cutting

Screen Printing. Produce various types of screen printed products. This includes domed decals, window decals, polycarbonates, embossing on various pressure sensitive materials.

Quality Certifications: ISO 9001:2008 • UL APPROVED • RoHS
ADL TECHNOLOGY     Booth # 615
Service Categories: Assemblies - Circuits • Prototypes - Electronic • Electronic Components • Electronic Hardware • Electronics - New Product Development

A contract manufacturer producing printed circuit boards. ADL Technology's robust engineering support team's key elements of board design are available to you. We can do your schematics or gerber file development as well as assess the design for manufacturability. We transform your idea into working products.

Quality Certifications: ISO 9001:2008
ADVANCED PLATING TECHNOLOGIES     Booth # 612
Service Categories: Metal Finishing - Electroplating • Metal Finishing - Electroless Nickel • Metal Finishing - Precious Metal Plating • Metal Finishing - Selective Plating • Powder Coating

A plating and powder coating company that provides engineered solutions in surface finishing such as gold plating, silver plating, electroless nickel plating and tin plating; among many others across a range of demanding industries including the medical, defense, power transmission/distribution, telecommunication and the oil & gas markets.

Quality Certifications: ISO 9001 & ISO 13485 • ITAR REGISTERED • FEDERAL FIREARMS LICENSE - FFL • SAM REGISTERED
AESTHETIC FINISHERS INC.     Booth # 512
Service Categories: Powder Coating • Metal Finishing - Painting • Fabricating - Sheet Metal • Pad Printing • Blasting

A family operated 80,000 sq. ft. decorative job shop coating facility specializing in the applications of powder coat, ceramic coat, firearm and cutlery coat, and high temperature resistant materials. Aesthetic Finishers is Cerakote certified. Screen and pad printing capabilities. Sheet metal fabrication including laser, precision forming,and welding.

Quality Certifications: ISO 9001:2008 WITHOUT DESIGN
AFC TOOL CO. INC.     Booth # 520
Service Categories: Tools, Dies & Fixtures • Special Machinery - Design, Build & Rebuild • Molds & Moldmaking - Metal • Stampings - Metal • Machining - CNC Milling & Turning

We provide quality and valued products in the design and manufacture of Custom Tooling Solutions including machined components, Special Machines, Jigs & Fixtures, Gauges, Molds & Stampings. Dayton Precision Aerospace Inc. is the manufacturer of the highest quality flight hardware and components. Visit us at www.dayaero.com

Quality Certifications: AS 9100D, ISO 9001:2015
AIRBORN INC.     Booth # 609
Service Categories: Connectors & Couplings • Assemblies - Cable • Electronic Components • Wire & Cable Harnesses • Engineering & Technical Services

An employee owned company whose core business is engineering & manufacturing specialized connectors & electronic components for Original Equipment Manufacturers (OEMs). AirBorn serves customers across many industries including: Aerospace, Energy, Geophysical, Industrial, Instrumentation, Marine, Medical, Military/Defense and Space Exploration.

Quality Certifications: AS 9100 REV D • 5S • 6 SIGMA • ANSI-J-STD001
ALLIED TOOL & DIE INC.     Booth # 310
Service Categories: Stampings - Ferrous & Non Ferrous • Stampings - Metal • Stampings - High Volume • Stampings - Progressive Die • Tools, Dies & Fixtures

We specialize in high quality precision and custom metal stampings. Industries we serve: Automotive, Power Equipment, Medical, Consumer Goods, Aerospace, Industrial, Lawn & Garden. Many value added services. OFF SHORE PRICING / ONSHORE RELIABILITY.



Quality Certifications: ISO 9001:2015
AMERICAN PLASTIC MOLDING CORP.     Booth # 127
Service Categories: Plastics - Injection Molding • Assemblies • Tooling - Plastic Injection Molding • Prototypes - Plastic • Plastics - Insert Injection Molding

APM: Adept-Productive-Motivated. Contract mfg., project mgmt., custom injection molding, UL approved assembly, finished packaging, drop-ship, plastic design seminars, design for manufacturing seminars, skilled engineering, dedicated customer service, domestic mfg., in-house tool shop, design enhancement, detailed quotes, mold flow analysis, and feasibility quotes.



Quality Certifications: ISO 9001:2008 • ISO 14001
AMERICAN PRODUCTS INC.     Booth # 135
Service Categories: Electronics - New Product Development • Assemblies - Electronic • Wire & Cable Harnesses • Assemblies - Printed Circuit Boards • Embedded Devices

Design and manufacture industrial electronic control systems including printed circuit board assemblies and wire harnesses.



Quality Certifications: ISO 9001:2015
ANDERSON QUALITY SPRING MFG. INC.     Booth # 217
Service Categories: Springs - Coil • Springs - Flat • Springs - Wave • Assemblies • Stampings - Fourslide

Custom manufacturer of springs, wire forms and formed metal products. Our customers are in the automotive, firearm, knife, sporting goods, electronic, medical, dental and motorcycle suspension products industries, worldwide. We work with our customers from design and prototyping to supplier managed inventory programs.



Quality Certifications: ISO 9001:2015 • IATF 16949:2016
ANSCO MACHINE     Booth # 402
Service Categories: Machining - CNC Milling & Turning • Machining - Multi Axis • Machining - Large Parts • Machining - Precision CNC • Machining - Castings

A state-of-the-art ISO9001 certified full-service contract machine shop specializing in milling and turning up to 100" (2540 mm) diameters. We work with castings, forgings, bar, and plate in both high volume production and small lots in a wide variety of materials from carbon and alloy steels through ductile and grey irons to aluminum to exotics.

Quality Certifications: ISO 9001:2008 • MIL-I-45208A
ARC-TRONICS INC.     Booth # 308
Service Categories: Assemblies - Electronic • Assemblies - Electromechanical • Assemblies - Printed Circuit Boards • Assemblies - Turnkey • Prototypes - Electronic

We are a full-service Electronic Manufacturing Services (EMS) provider for turnkey products in printed circuit board assembly, cable/harness assembly, and complete box build or higher level integration. The company is ISO 9001:2008, ISO 13485:2003, and AS9100 Rev. C certified. Arc-Tronics is also an ITAR registered company.



Quality Certifications: ISO 9001:2008 • AS 9100 REV C • ITAR • ISO 13485:2003
ATI MACHINING     Booth # 507
Service Categories: Machining • Machining - Production • Machining - CNC Milling & Turning • Machining - Multi Axis • Machining - Precision CNC

We are a full service CNC Machining Facility with CNC Milling and CNC Lathe capabilities. We specialize in high precision, close tolerance prototype and production CNC Machining. Quality and Customer-driven, ISO Compliant, Competitive Pricing, Fast Quote and Lead Times. High-speed Machining, Prototype Development, Small to Medium Production 4-axis CNC Milling and Turning Center.

AVANTI ADVANCED MFG. CORP.     Booth # 614
Service Categories: Plastics - Injection Molding • Machining • Pad Printing • Assemblies - Electrical • 3D Printing

Why did we start a manufacturing business in the U.S. during a recession in what many saw as a dying North American industry? The answer is simple: Where others saw failure, we saw opportunity. We’re carving out an industry of our own with lean manufacturing all while being based in the U.S. so that we can reliably meet our client’s deadlines. We begin where others finish!

Quality Certifications: ISO 9001 CERTIFIED
BAKER MFG. CO. LLC     Booth # 522
Service Categories: Castings - Gray Iron • Castings - Ductile Iron • Castings - Sand

We have a reputation for high-quality casting products, blending the experience and technical skills of our craftsmen and the technology of today to serve the gray and ductile iron casting needs of our customers.

Quality Certifications: ISO 9001:2015
BARE BOARD GROUP     Booth # 120
Service Categories: Fabricating - Printed Circuit Boards • Printed Circuit Boards - Aluminum Clad • Circuits - Flexible • Prototypes - Fabrication • Prototypes - Electronic

Prototype through production, BBG is dedicated to providing quality PCB's built domestically & offshore. Rigid, Rigid Flex, Flex & Metal Clad PCB's. ITAR Registered (Domestic & Offshore), Military and Aerospace production. Specializing in RF; Medical; LED Lighting, Automotive and ITAR applications. BBG is also WEE, UL and RoHS Compliant and a Minority Business Enterprise.



Quality Certifications: ITAR • ISO 9001:2008 • TS 16949 • ISO 14001
BATESVILLE PRODUCTS INC.     Booth # 107
Service Categories: Castings - Permanent Mold • Castings - Aluminum • Castings - Zinc

Aluminum & zinc castings, engineering assistance, in-house tooling, machining & assembly. Castings from a few ounces to 80 lbs. Quantities from 500 to 150,000.



Quality Certifications: ISO 9001:2008
BERGAD SPECIALTY FOAMS AND COMPOSITES     Booth # 518
Service Categories: Plastics - Flexible Foam • Machining - Conventional CNC • Roll Forming • Assemblies - Stamped • CAD Design Services

A manufacturer and fabricator of polyurethane foams and gels for the home, healthcare, electronics, industrial, oil and gas, aerospace, military, and transportation markets. Our products include finished goods, sub-assemblies, laboratory services, R&D and testing, as well as raw materials for OEMs, fabricators, and retailers.

BOEHM PRESSED STEEL CO.     Booth # 129
Service Categories: Stampings - Metal • Stampings - Progressive Die • Stampings - Deep Drawn Shells

Complete die design to precision metal stampings and assemblies, welding robotic & welding resistance. Single hit press line. Short run & high volume stampings. In-House tooling.



Quality Certifications: ISO 9001:2015 WITH DESIGN
BONNELL ALUMINUM (DIV.- AACOA/FUTURA)     Booth # 306
Service Categories: Aluminum - Materials • Extrusions - Aluminum • Fabricating - Aluminum Extrusions • Machining - Aluminum • Metal Finishing - Anodizing

We are a leader in aluminum extruding, fabricating and anodizing. We are recognized for providing superior quality fabricated aluminum extrusions along with exceptional customer service. Our highly trained employees are committed to provide value to customers for their custom aluminum extrusions, specialty fabrication or direct job-shop anodizing requirements.



Quality Certifications: ISO 9001 • ISO 14001 • ISO/TS 16949
BURTON INDUSTRIES     Booth # 317
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Electronic • Engineering & Technical Services • Surface Mount Technology - Assembly • Electronics - New Product Development

PCBAs and Box Builds! Protoypes! Low/medium - volume high mix. Burton’s Mission Statement: We provide superior customer service and value to enhance our Customer’s position in the marketplace. Our message to you is simple - Talk to us! How can we help you be more successful and achieve your goals? We have been helping our customers for 40 years.

Quality Certifications: ISO 9001:2008 • ISO 13485:2003 • IPC-A-610 • IPC-J-STD
BUTLER TECHNOLOGIES INC.     Booth # 213
Service Categories: Switches - Membrane • Labels, Tapes & Decals • Screen Printing • Nameplates, Dials & Panels • Prototypes - Electronic

For over 25 years Butler Technologies has been providing screen/digitally printed Membrane Switches, Overlays & Labels. Additional products and processes include printed electronic components, dials & gauges, rubber keypads & laser cutting service. Please ask about our Rapid Prototype Program.



Quality Certifications: ISO 9001 • UL APPROVED • ITAR • CSA APPROVED
C & K PLASTICS/VALLEY EXTRUSIONS     Booth # 114
Service Categories: Plastics - Thermoforming/Vacuum Forming • Plastics - Pressure Forming • Extrusions - Plastic • Plastics - Extruded Profiles • Plastics - Thermoplastic Extrusion

C&K Plastics and Valley Extrusions are sister plastic companies. Since 1963 C&K has specialized in cut sheet vacuum, pressure and twin sheet forming, also providing CNC machining and contract manufacturing. Since 2001 Valley has specialized in custom plastic extrusions with co-extrusions & tri-extrusions, large parts, complex hollows & tubing capabilities produced in most thermoplastics. Our three facilities have a combined 450,000 sq.ft. giving us the capacity to meet even the largest requirements. Valley Extrusions - PA, C&K - NJ, and C&K Georgia - GA.



Quality Certifications: ISO 9001:2008
C2G - A BRAND OF LEGRAND     Booth # 322
Service Categories: Cable & Wire Manufacturing • Assemblies - Cable • Cables - Mechanical • Fiber Optic Tooling & Components • Rapid Prototyping

We provide solutions and services to original equipment manufacturers in industries such as medical/healthcare, contract manufacturing, gaming, hospitality, and industrial—ranging from regionally-based organizations to multi-national companies. Whether you need a modified stock cable alteration, or a custom engineered application, you can count on C2G.



Quality Certifications: ISO 9001:2015
CAI LLC / FORM MANUFACTURING     Booth # 202
Service Categories: Wire & Cable Harnesses • Plastics - Injection Molding • Panels - Control • Assemblies - Electronic • Assemblies - Printed Circuit Boards

Manufacturer of WIRE HARNESS, CABLING, INJECTION MOLDING and ELECTROMECHANICAL ASSEMBLY. Prototype to production volume of ASSEMBLY HARNESSES, INJECTION MOLDING, HOT STAMP AND DECORATIVE PLASTICS; BOX BUILDS, miniature harness assemblies, coil cord, custom over molding. Ohio & Pennsylvania locations. For quote or inquiry, email info@sig4cai.com

Quality Certifications: ITAR • IPC 610 / 620 • UL RECOGNIZED
CENTURY SPRING CORP.     Booth # 225
Service Categories: Springs - Coil • Stampings - Fourslide • Wire Forming & Fabricating • Springs - Flat • Springs - Wave

A MW Industries location, is the go-to source for Made in USA stock and custom springs, for any OEM or MRO application. Same day shipments from over 35,000 stock designs - compression, extension, torsion, tapered, disc, urethane and die springs. Century also specializes in custom springs. Inquire at info@centuryspring.com. FREE CATALOG upon request.



Quality Certifications: ISO 9001:2008
CIMQUEST INC.     Booth # 424
Service Categories: 3D Printing • Rapid Prototyping - Equipment • Reverse Engineering • Inspection Services • CAD/CAM Software

We are a leading resource for 3D printing, Reverse Engineering, and CNC programming based in Branchburg, NJ. Serving the East Coast since 1990, we help equip companies (small and large) with tools for product development, manufacturing, and final part inspection. With a diverse staff of machinists, engineers, and technicians, Cimquest understands the latest technology and will direct companies to the best solution even if it's not our own. 3D Printing hardware and services include HP Multi Jet Fusion and Desktop Metal solutions.

CLARK METAL PRODUCTS     Booth # 410
Service Categories: Fabricating - Sheet Metal • Metal Cabinets & Enclosures • Electronic Enclosures • Assemblies - Mechanical

An award-winning advanced manufacturing company, specializing in precision sheet metal fabrication. From our headquarters near Pittsburgh, PA, we provide cost-effective solutions, quality products, value-added services and on-time delivery to companies in a wide range of industries including electronics, healthcare, life science, transportation and robotics.

Quality Certifications: ISO 9001
COMPUTER AIDED TECHNOLOGY     Booth # 204
Service Categories: Rapid Prototyping • CAD/CAM Software • CAD/CAM Training • 3D Printing

From SolidWorks 3D CAD Software & Training, Stratasys 3D Printers to Creaform 3D Scanners CATI is able to create a competitive advantage for manufacturing clients by leveraging an industry-experienced team & leading technology solutions.

CRADDOCK FINISHING CORP.     Booth # 105
Service Categories: Metal Finishing - Painting • Plastics - Painting • Shielding - EMI/RFI • Powder Coating • Pad Printing

Contract production painting (Metal/Plastics) - Powder, Liquid, CARC, Teflon, and EMI/RFI Shielding. Chemical pre-treatment including RoHS Chromate, Blasting, Pad Printing, Silk-Screening, Mask Making, High-Bake capability and Blister Packaging.



Quality Certifications: ISO 9001:2015 • CONTROL PLANS • FEMA • FLOW CHARTS - SPC
CRAWFORD MFG. CO.     Booth # 401
Service Categories: Wire Forming & Fabricating • Stampings - Fourslide • Stampings - High Volume • Springs - Coil • Assemblies

A family owned manufacturer of high quality wire forms, stampings, springs, and assemblies since 1965. Our customer focused business practices include quality, reliability, and volume feasibility. We also provide design and engineering support. In-House Quality System. Contact us to help fill your needs.



CW THOMAS      Booth # 215
Service Categories: Plastics - Thermoforming/Vacuum Forming • Plastics - Pressure Forming • Plastics - Low Volume • Prototypes - Plastic • Plastic Cabinets & Enclosures

For over 70 Years CW Thomas has been producing highly engineered plastic parts and assemblies, delivered when needed to our customers, and at fair and reasonable prices. We have an established reputation as an industry leader in expanding the viability of the thermoforming processes of Vacuum and Pressure forming.



Quality Certifications: ISO 9001:2008 • AS 9100C
DA/PRO RUBBER INC.     Booth # 125
Service Categories: Rubber Molding • Plastics - Injection Molding • Silicone / Rubber - Liquid Injection Molding • Rubber To Metal Bonding • Rubber - Compression Molding

5 facilities for compression/injection molding - high-quality custom rubber, TPE, & plastic components molded to precision tolerances such as diaphragms, seals, connectors, molded shapes, rubber to metal parts for medical device, electronic & aerospace industries. Class 10,000 cleanroom - chemists & engineers assist in optimal moldability. sales@daprorubber.com



Quality Certifications: ISO 9001
DATUM ALLOYS INC.     Booth # 608
Service Categories: Alloys • Machining - Stainless Steel • Machining - Miniature Precision

Supplies and manufactures the highest performing stencil materials available. Datum machines and manufactures step stencil, cavity stencil, ball drop stencil, 3D flux and wafer stencil blanks. Tolerances are from ±2 microns in X, Y and Z. Unlike other processes we have no limitation on heights, feature sizes, feature placement multi steps or aspect ratios.

Quality Certifications: ISO 9001:2015
DECA MANUFACTURING     Booth # 405
Service Categories: Wire & Cable Harnesses • Assemblies - Electronic • Assemblies - Cable • Assemblies - Electromechanical • Wire Forming & Fabricating

Full service contract manufacturer of wiring harnesses, custom cabling, and electrical assemblies. 35 years in business with a diversified customer base including automotive, military, electronics, and industrial customers. Specialties include hand-soldering, working with higher gauge materials, breadth of tooling and connectors, laser stripping, and overmolding.

Quality Certifications: ISO 9001:2015 • ITAR • IPC 620A • CAGE CODE 0CA45
DESIGN MOLDED PLASTICS     Booth # 524
Service Categories: Plastics - Injection Molding • Plastics - Two Shot Injection Molding • Plastics - Insert Injection Molding • 3D Printing • Molds & Moldmaking - Plastic

Premier custom injection molding company that offers full service engineering based solutions through part and mold design, value added assembly, automation, and 3-D Printing. Diversified market segments supported by press sizes ranging from 88 to 950 ton, including two-shot, insert, and vertical molding.

Quality Certifications: ISO 9001:2008
EFE LABORATORIES INC.     Booth # 603
Service Categories: Assemblies - Electromechanical • Control & Measurement Electronics • Engineering & Technical Services • Electronics - New Product Development • Reverse Engineering

With over 50 years of industrial and manufacturing experience, EFE is an established, build to specification electrical and mechanical manufacturer. By collaborating with customers across diverse markets in pursuit of superior product design, development, and manufacturing services, EFE brings extraordinary expertise to its customers.

Quality Certifications: ISO 9001 • AS 9100D • ITAR
EPILOG LASER     Booth # 113
Service Categories: Lasers • Laser Cutting • Laser Engraving • Laser Marking • Bar Coding

An industry leader in design of laser engraving, cutting & marking systems, manufacturers of the Epilog Zing, Mini, Helix, Fusion M2, FiberMark, and G2 Galvo series of laser systems.



Quality Certifications: ANSI STANDARDS • IEC • CE • CFR 21
EVANS     Booth # 118
Service Categories: Stampings - Deep Drawn Shells • Eyelets & Drawn Shells • Stampings - Metal

Conventional multi-station transfer presses. Custom designed progressive type presses. Thin-walled drawn metal shells, tubular parts and precision metal stampings.



Quality Certifications: ISO 9001:2015
EVER-ROLL SPECIALTIES CO.     Booth # 515
Service Categories: Tube Bending & Fabricating • Wire Forming & Fabricating • Tubular Parts - Die Swaged • Welding - Resistance • Welding - Robotic

With 72 years in business, specializing in tube bending (mandrel and CNC 3/8"- 2"), steel rings-wire (0.092"- 1"), tubular rings (0.25"- 2") and press work. Hole piercing and end forming available. In-house tool shop. Our ISO 9001:2015 registration means a commitment to continuous improvement, quality and service. 100% employee owned and operated.

Quality Certifications: ISO 9001:2015 • PPAP's
FAB FORM     Booth # 509
Service Categories: Stampings - Short Run • Fabricating - Steel • Machining - CNC Milling & Turning • Fabricating - Sheet Metal • Powder Coating

A turn-key Metal Stamping, Fabricating and Machining company founded in 1978, specializing in Laser Cutting, CNC Punching, Metal Stamping, CNC Bending, Welding, Vertical and Horizontal Machining, Forming and Powder Coating. We offer complete manufacturing solutions from design and development to full production.

Quality Certifications: ISO 9001:2008
FAB MASTERS CO. INC.     Booth # 211
Service Categories: Extrusions - Aluminum • Fabricating - Aluminum Extrusions • Machining - Aluminum • Welding - TIG Aluminum • Heat Sinks

Suppliers of complete precision-machined parts from custom aluminum extrusions with finishing available. Totally accountable from extrusions to complete finished part. All production welding & custom fabrications are built to customer or military specifications. Our welders are AWS certified in several alloys, Mig & Tig.

Quality Certifications: ISO 9001:2015 • ITAR REGISTERED • VOSB • AWS
FORMASTERS CORP.     Booth # 621
Service Categories: Roll Forming • Stampings - Metal • Tools, Dies & Fixtures • Die-Cutting • Waterjet Cutting - Metal

A Cleveland, OH based Custom Roll-Forming & Stamping manufacturer. For over 25 years, ForMasters has served the Tool & Die and OEM industry. Our facility has the capability of complete custom Roll-Forming & Stamping manufacturing, from Engineering design, testing to production with our specialized tooling, that is completed in-house.

Quality Certifications: ISO
FRALO INDUSTRIES INC/VICTOR GROUP CO.     Booth # 417
Service Categories: Fabricating - Sheet Metal • Powder Coating • Electronic Enclosures • Welding & Weldments • Controls - Industrial & Machine Tool

A leading sheet metal fabricator with full-service capabilities. We produce high quality sheet metal components & finished assemblies. Custom sheet metal fabrication of all types of steels. Custom metal cabinets & enclosures. Powder Coating in various colors & textures. MIG, TIG & Robotic welding.

Quality Certifications: ISO 9001:2015 • RoHS • UL 508A • DOD REGISTERED
GOPROTO INC.     Booth # 312
Service Categories: 3D Printing • Machining • Tooling - Plastic Injection Molding • Tooling - Casting • Prototypes - Models

Delivering turnkey plastic and metal part manufacturing solutions including industrial design model making, rapid prototyping, additive manufacturing, cast urethane, CNC machining, rapid sheet metal, rapid injection tooling, production parts (injection molding, stamping, die-cast, sheet metal), and part finishing to complete your product.



Quality Certifications: ISO 9001
GPC ELECTRONICS     Booth # 210
Service Categories: Assemblies - Electronic • Assemblies - Turnkey • Wire & Cable Harnesses • Surface Mount Technology - Assembly • Assemblies - Printed Circuit Boards

Since our inception in 1985, we've had a track record of working with leading OEMs in North America, Europe, Asia & the Pacific. We are able to customize processes, delivering unique solutions to our customers, providing them with a competitive advantage & positive outcomes. We are a full service EMS and cable harness provider with three manufacturing sites globally.



Quality Certifications: ISO 9001 • ISO 14001 • ISO 13485 • ISO/TS 16949
GRACIOUS LIVING INNOVATIONS INC.     Booth # 304
Service Categories: Plastics - Extruded Profiles • Extrusions - Plastic

A North American custom profile extrusion company and a recognized international leader in thermoplastics profile design, engineering, processing and value-added manufacturing. We have over 40 years of experience helping our customers discover unique and innovative possibilities in plastic extrusion.

Quality Certifications: ISO 9001:2008
GRAPHICAST INC.     Booth # 325
Service Categories: Castings - Permanent Mold • Castings - Graphite Mold • Castings - Zinc • Castings - Non-Ferrous

Zinc alloy castings using unique graphite permanent mold process. Low cost graphite molds make this process ideal for low to medium quantities. Eliminate expensive CNC hog-outs, high tooling costs, and long lead-times. In-house design, mold building and precision CNC machining. Cosmetic and protective finishes available.



Quality Certifications: ISO 9001:2008
HARBOR CASTINGS     Booth # 205
Service Categories: Castings - Investment • Castings - Non-Ferrous

A ferrous and non-ferrous investment castings company. Offering services to a diverse group of customers. Our customers include working with the aerospace industry, military, defense, transportation, air and hand tools, oil field, medical, valve and pump, door hardware, gun and food industries – to name a few.

Quality Certifications: ISO 9001:2015 • AS 9100D
HARMONY CASTINGS LLC     Booth # 126
Service Categories: Castings - Aluminum • Castings - Sand & Shell • Castings - Sand

We are a leader in the production of aluminum castings. We are an ITAR compliant and AS9100 Certified facility. Our V-process delivers tight tolerances, thin walls and excellent surface finish. Further we're able to bring your project from model to production in just three weeks.



Quality Certifications: ISO 9001:2008 • AS 9100 REV D
HARVEY VOGEL MFG. CO.     Booth # 323
Service Categories: Stampings - Metal • Fabricating - Sheet Metal • Assemblies • Prototypes - Rapid Sheet Metal • Welding & Weldments

Complete Metal Service Contractor. Metal Stamping, Fabrication, Machining, In-House Powder Coating & more. Metal Stamping experts for quality fabrication services since 1942. We excel at producing the most difficult stampings and metal fabrications for a wide variety of industries. Our niche is short to medium run quantities of 1,000 pieces to 50,000 pieces annually.

Quality Certifications: ISO 9001:2015 • ISO 14001
HI-TECH FASTENERS INC.     Booth # 119
Service Categories: Fasteners • Electronic Hardware • Threaded Parts • Grommets • Assembly Hardware

Authorized stocking distributor for 60 leading fastener & component lines. Products include PEM, Southco, circuit board hardware & accessories, threaded inserts for plastics, cable components, adhesives & tapes, commercial & military hardware, installation tools, grommets, grommet edging, gaskets, extrusions, seals trim, fiber management, cable sleeving and wraps.



Quality Certifications: ISO 9001:2000 • MIL-I-45208A
HYDRO TUBE ENTERPRISES INC.     Booth # 121
Service Categories: Tube Bending & Fabricating • Laser Cutting • Cutting - Tube & Pipe • Welding & Weldments • Powder Coating

We are experts in tube bending & fabrication, providing innovative quality products & services. From robotic welding, to powder coat painting to LASER TUBE CUTTING to 12" diameter, our customers use our many services to get assemblies done well & done right. Ask us about our 5 axis laser. For a quote call Tim @ 919-258-3070.



Quality Certifications: ASTM - SAE • METRIC - JIS • CE AWS • ISO 9001-2000
INNOVATIVE ELECTRONICS CORP.     Booth # 128
Service Categories: Assemblies - Electronic • Assemblies - Printed Circuit Boards • Assemblies - Electromechanical • Prototypes - Electronic • Assemblies - Electrical

Full service Electronics Contract Mfgr. Electronics & electro-mechanical assemblies to customer specs, top quality workmanship at the lowest cost. Prototypes, small & medium production of surface mount technology, through hole & mixed technology. Highly skilled staff to assist in product development & product mfg. Deeply committed to customer service.



Quality Certifications: IPC-A-610D • IPC/WHMA-A-620 • ISO 13485 • J-STD-001
INSULFAB PLASTICS INC.     Booth # 206
Service Categories: Plastics - CNC Machining • Plastics - Sheet, Rod & Tube • Stampings - Progressive Die • Plastics - Screw Machining • EDM - Wire

Specializing in precision CNC machining, turning & die cutting of thermoplastics, thermosets, composites, films & fibre. Prototypes, Turnkey Assembly. Design & fabrication of specialty assembly and process tooling for the PCB industry including wire EDM.

Quality Certifications: ISO 9001:2008 • ITAR
INTERNATIONAL CERAMIC ENGINEERING     Booth # 223
Service Categories: Ceramic Parts • Machining - Ceramics • Grinding - Ceramics • Ceramics - Metallizing & Plating • Prototypes - Machining

A leading manufacturer & fabricator of technical ceramic materials & machinable thermo-plastics. We offer engineering assistance during the prototype process through to production. We specialize in unique geometries made from high quality advanced materials. Competitive pricing with quick deliveries. Materials include Alumina Oxide, Boron Nitride, Macor™, Zirconia, PEEK, Ultem & More!



IONIC TECHNOLOGIES INC.     Booth # 305
Service Categories: Nitriding • Heat Treating • Cryogenic Treatment • Metal Finishing - Black Oxide

Our company’s vision is to offer the metal working industry the highest level of Ion, Gas, Solution Nitriding and Vacuum Heat Treatment services for all types of metals. Our goal is to continually seek new technologies that will allow our customers to be competitive in today’s marketplace.

Quality Certifications: AS 9100 • ISO 9001 • TS 16949
ISELI - A DIVISION OF APEX TOOL GROUP LLC     Booth # 221
Service Categories: Screw Machining - Swiss/CNC Swiss • Screw Machining - Escomatics • Machining - Miniature Precision

Precision machined components to 1.125" diameter. Complete secondary including: thread rolling, knurling, milling, tapping, drilling and slotting. For a Quote, email David at david.atwood@apextoolgroup.com.



Quality Certifications: ISO 9001:2015
K & S PRECISION METALS     Booth # 208
Service Categories: Tubing - Cold Drawn • Cutting - Tube & Pipe • Drilling & Tapping

Providing high quality brass, aluminum & copper tubing, rod, strips & sheets. Secondary operations include cut to length, draw to size, milling, tapping & threading. Low minimums & quick delivery.



KNOWLTON MFG. CO.     Booth # 406
Service Categories: Stampings - Progressive Die • Stampings - Deep Drawn Shells • Stampings - High Volume • Stampings - Short Run • Stampings - Metal

Providing Precision Engineered Stamped parts since 1935. We can produce short run, one of a kind parts and also high volume annual contracts. We can produce parts made out of CRS, HRP&O, aluminum, stainless and other materials. We have shearing, grinding and misc. welding as well as press brakes.

KOSMO MACHINE INC.     Booth # 422
Service Categories: Machining • EDM • EDM - Sinker • EDM - Wire • Inspection Services

Employee owned business devoted to quality production and superior customer service. Our full-service precision machine shop specializes in CNC milling and turning, EDM machining and custom welding processes. We also offer a range of reconditioning services, including dry-ice blasting and alternative methods of advanced cleaning.

Quality Certifications: ISO 9001-2015 • AS9100-D • PED CE CAT II EU • SUBSAFE LEVEL-1
KOVATCH CASTINGS INC.     Booth # 136
Service Categories: Castings - Investment • Castings - Stainless Steel • Castings - Aluminum • Castings - Steel • Prototypes - Rapid Casting

FFL-7 / SOT Ferrous & non-ferrous air-melt alloys. Up to 30 lbs. short & long production runs for aerospace, military, medical castings. Full NDT, chemical laboratory & in-house machining & tooling. We also quote rapid prototyping with our in-house wax prototype printer. Surgical tools, Cobalt spherical ball bearings, rod ends, manifolds, and military ordnance components.



Quality Certifications: NADCAP WELD & NDT • AS 9100C / ISO 9002 • GE AEROSPACE • LOCKHEED / BOEING APRV.
K-TEK WISCONSIN / K-TEK CAROLINA     Booth # 212
Service Categories: Stampings - Progressive Die • Fabricating - Sheet Metal • Assemblies - Electromechanical • Welding - Robotic • Wire Forming & Fabricating

We are the world-class manufacturers of metal components for the Major OEM markets. We have presses from 30 to 400 tons. Specializing in short to long run stampings with a variety of globally competitive tooling options. Sheet metal fabrication up to .500" thick. We also provide WIRE FORMING capabilities with Round / Square wire .080 - .625 thick.

Quality Certifications: ISO 9001:2008
LAKESIDE CASTING SOLUTIONS     Booth # 132
Service Categories: Castings - Die, Zinc • Castings - Zinc • Castings - Die • Tooling - Casting • Castings - Non-Ferrous

Manufacturer of precision Zinc die-castings. Specializing in Four-Slide Tooling Technology. Tight tolerances, thin walls, internal cast threads, secondary machining, assembly, product protective finishes. We have a fully equipped, on-site tool shop, offering complete tool builds, repairs and maintenance. Please submit RFQs to: mhetheriton@lakesidecasting.com.



Quality Certifications: ISO 9001:2015
LAMOTHERMIC PREC. INVEST. CASTING CORP.     Booth # 220
Service Categories: Castings - Investment • Castings - Steel • Castings - Ferrous

We manufacture investment castings from fractional ounces to 70 lbs. In-house capabilities include CNC machining, NDT, heat treating & complete to print parts.



LASZERAY TECHNOLOGY LLC     Booth # 514
Service Categories: Plastics - Injection Molding • Tooling - Plastic Injection Molding • Assemblies - Electromechanical • Machining - Precision CNC • Machining - Castings

An integrated manufacturer of quality, custom injection molded components and highly engineered tooling. Laszeray provides customers with a full suite of value-added services.

Quality Certifications: ISO 9001:2015
MALISH PLASTICS     Booth # 426
Service Categories: Extrusions - Plastic • Plastics - Extruded Profiles • Plastics - Sheet, Rod & Tube • Brushes • Fabricating - Plastic

Plastic Extrusion services, including heavy wall pipe/tube, flexible and rigid profile shapes in various configurations and resin options including PVC, ABS, HDPE, PC, HIPS, PP, TPR and TPU. Co-extrusions, Design assistance and In-House tooling capability. We can take your idea from design to reality.

MERCURY CORP.     Booth # 224
Service Categories: Fabricating - Sheet Metal • Metal Cabinets & Enclosures • Assemblies - Turnkey • Fabricating - Aluminum • Fabricating - Stainless Steel

AN INTEGRATED SOLUTION TO YOUR SUPPLY CHAIN - we build custom racks, frames, enclosures, plastics & stamping assemblies. CORE PROCESSES: Design, Metal Fabrication, welding of all types of metals, Plastic Injection Molding, Finishing, Turn-Key Assemblies & KAN BAN.



Quality Certifications: ISO 9001:2008 • ISO 13485 • AS 9100 • ITAR REGISTERED
METALFAB GROUP     Booth # 517
Service Categories: Fabricating - Stainless Steel • Fabricating - Steel • Fabricating - Aluminum • Laser Cutting • Engineering & Technical Services

We can meet all of your prototyping and production needs with a wide variety of metal fabricating capabilities and experience. With our knowledgeable staff, advanced technology, and state-of-the-art equipment, we aim to meet your fabricating needs and exceed your expectations.

Quality Certifications: ANSI/ASQ 9001:2000 • ISO 9001:2015
METALLON INC.     Booth # 319
Service Categories: Stampings - High Volume • Stampings - Progressive Die • Stampings - Ferrous & Non Ferrous • Stampings - Metal

High volume precision stampings. Progressive dies run in presses up to 150 tons. Added value: welding, staking, tapping & assembly. Product design assistance, prototyping.



Quality Certifications: ISO/TS 16949 • ISO 9001 • ISO 14001
METALPHOTO OF CINCINNATI / PANNAM     Booth # 408
Service Categories: Tags - Custom • Switches - Membrane • Circuits - Flexible • Labels, Tapes & Decals • Nameplates, Dials & Panels

We have been a leading full-service manufacturer of durable custom nameplates, panels, overlays, labels and signs for more than 50 years. Pannam Imaging is a recognized worldwide leader specializing in the manufacture of complex, mid-to-low volume integrated human-machine interfaces with unique functional, graphic or performance requirements.

Quality Certifications: UL & CSA REGISTERED
MONTI INC.     Booth # 624
Service Categories: Fabricating - Sheet Metal • Fabricating - Plastic • Machining - Multi Axis • Metal Finishing - Electroplating • Metal Finishing - Painting

For 47 years, we have specialized in manufacturing and fabricating conductors, insulators, and steel parts for the electrical industry. Unlike our competitors who focus on one service or material type, we offer a broad selection of products and services, allowing our customers to drastically reduce their vendor base.

Quality Certifications: ISO 9001:2015 CERTIFIED
MOORE INDUSTRIES INC.     Booth # 318
Service Categories: Plastics - Injection Molding • Fabricating - Foam

A Leading Midwest Supplier of Custom Injection Molding. Production capabilities include machine ranging in size from 75 to 2,000 tons, all with robotic technology and several with Market experience in automotive, heavy truck, building and construction, office furniture and many other types of OEM molding.

Quality Certifications: ISO 9001
NEUMAN ALUMINUM IMPACT EXTRUSION INC.     Booth # 316
Service Categories: Extrusions - Impact • Fabricating - Aluminum • Machining - Aluminum • Assemblies - Mechanical • Forgings - Cold

We are a leading manufacturer of aluminum impact extrusions for many different markets including automotive, defense, and electrical. Benefits include increased strength from cold working, uniform grain structure (no voids), and different wall and bottom thicknesses. We have in-house heat treatment and final CNC machining. We are ISO/TS 16949 & ISO 14001 certified.



Quality Certifications: ISO/TS 16949
NORTHERN PRECISION PRODUCTS     Booth # 613
Service Categories: Screw Machining - Multi Spindle • Screw Machining • Sensors • Machining - Aluminum • Machining - Stainless Steel

Specializes in complex profiles, custom temperature and pressure sensor housings, high pressure fittings, and specialty fasteners. Northern Precision Products' high performance screw machines allow us to offer cost effective large or small runs in stainless steel, brass, steel, and aluminum.

Quality Certifications: IATF 16949 • ISO 9001
NORTHWEST TOOL & MFG. CO. INC.     Booth # 407
Service Categories: Machining • EDM - Wire • Special Machinery - Design, Build & Rebuild • Tools, Dies & Fixtures • Machining - Exotic Materials

We started out in 1965 as a small machine shop that provided a service to local factories. Throughout the following years, Northwest Tool gained a reputation of being a reliable machining source. Now with a 22,000 sq. ft. facility and some of the trade’s most modern equipment, Northwest Tool has the size and capability to make us a widely versatile shop.

NU-DI CORPORATION     Booth # 516
Service Categories: Wire & Cable Harnesses • Assemblies - Cable • Assemblies - Electronic • Cable & Wire Manufacturing

A family-owned business since 1976, Nu-Di Corporation is a custom manufacturer of Wire Harnesses, Cable Assemblies, PCB Assemblies, and other Custom Manufacturing Solutions. We are a preferred supplier in the Automotive Service Industry, and we strive to meet and exceed our customers' expectations from design aid through the entire manufacturing process.

OGS INDUSTRIES (OHIO GASKET & SHIM CO)     Booth # 314
Service Categories: Stampings - Metal • Fabricating - Sheet Metal • Laser Cutting • Welding - Robotic

Manufacturer of Custom Metal Stampings, Custom Metal Fabrication, Metal Forming, Brackets, Precision Shims, Metallic Gaskets, Laser Cutting, CNC Punching, Welding (Mig, Spot, Stud, Nut), Inventory Stocking Programs, Specialized Packaging, Part Marking & Labeling.

Quality Certifications: IATF 16949 • AS 9100 • ISO 14001
OHIO LASER LLC     Booth # 321
Service Categories: Laser Cutting • Cutting - Tube & Pipe • Fabricating - Stainless Steel • Fabricating - Steel • Welding - Robotic

A contract manufacturer which specializes in laser cutting & fabrication of steel, stainless & aluminum materials (tube, sheet & plate). We utilize multiple Trumpf tube and flat lasers to produce parts and assemblies. Other services include mig and tig welding, laser welding, forming, punching, plate flattening and assembly. Contact our staff for your next project.

Quality Certifications: ISO 9001:2015 • AWS D1.1 WELDING
PAMTON 3D COMMERCIAL PRINTING     Booth # 513
Service Categories: 3D Printing

Commercial 3D printing company offering multiple filaments, ceramic, metal & poly-jet. We are a woman owned small business.

PCM PRODUCTS INC.     Booth # 111
Service Categories: Photochemical Etching & Machining • Shielding - EMI/RFI • Chemical Milling

We produce precision, burr/stress free parts, .1" thick down to .0001" thick. In-house plating, forming, heat treating and assembly. Competes with laser cutting and EDM. COMPLIANT TO ISO 9001:2000 & AS9100B & ANSI/ASQ Z1.4-2003.



Quality Certifications: MIL-I-45208
PENNSYLVANIA STEEL - CLEVELAND DIV.     Booth # 326
Service Categories: Saw Cutting • Tube Bending & Fabricating • Cutting - Tube & Pipe • Aluminum - Materials • Alloys

Production cutting: Aluminum, Stainless, Cold finish, Alloy, Tool Steel, and Brass. Precision plate cutting: Aluminum, Stainless, and Tool Steel. Also available: Milling, Grinding, Gun-Drilling, and Hollow Bar.

Quality Certifications: ISO 9001:2008
PERMABOND ENGINEERING ADHESIVES     Booth # 203
Service Categories: Adhesives • Gaskets, Seals, Washers & O-rings • Potting & Encapsulation • Surface Treatment • Coatings - Conformal

Quality certified manufacturer of adhesives & sealants. Product lines include anaerobic, cyanoacrylates, epoxy, structural acrylic, UV/visible, modified epoxy, MS polymer and polyurethanes.



Quality Certifications: ISO 9001:2015
PHILPOTT RUBBER & PLASTICS     Booth # 324
Service Categories: Rubber Molding • Plastics - Injection Molding • Rubber - Polyurethane Molding

Founded in 1889 and specializes in the supply, distribution and manufacturing of industrial rubber and plastic products including molded, extruded, cast, lathe cut, machined, die cut, custom fabricated and other specialty products.

Quality Certifications: ISO 9001:2015 CERTIFIED
PLASTIC DESIGN INT'L. INC.     Booth # 122
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Tooling - Plastic Injection Molding

We have evolved & expanded our initial core competencies of injection molding into a broad range of products & services, tailored to meet the needs of the changing manufacturing world of today & tomorrow, which include molded components, sub-assemblies & complete products. For inquiries email us at sales@plasticdesign.com.



Quality Certifications: ISO 9001:2015
PR MACHINE WORKS INC. / SAS INC.     Booth # 302
Service Categories: Machining - CNC Milling & Turning • Machining - Multi Axis • Machining - Production • Prototypes - Fabrication • Assemblies - Turnkey

A full-service facility with state-of-the-art equipment. Our capabilities include: low to high volume production machining, prototypes, precision fabrication & welding, design & managed inventory services. Secondary operations include in-house plasma cutting, punching, forming, & shearing; along with AWS-certified MIG, TIG & stick welding for virtually any ferrous or non-ferrous material. Quality products and custom machines built to your specs & delivered on time, every time.

Quality Certifications: ISO 9001:2015
PRECISION GRAPHICS INC.     Booth # 207
Service Categories: Nameplates, Dials & Panels • Switches - Membrane • Labels, Tapes & Decals

Front-Panels, Faceplates, Graphic-Panels, Metalphoto-Panels, Membrane-Panels, Graphic-Overlays, Labels, and Nameplates. In-House capability of metal machining, punching, bending, Pem-insertion, membrane circuits made 100% in-house. For a quote, send RFQ to rossj@pgict.net and dawnb@pgict.net. Or call Ross Johnson at 860-248-2046.



Quality Certifications: ITAR
PRINCIPAL MANUFACTURING CORP.     Booth # 219
Service Categories: Assemblies - Stamped • Stampings - Fineblanked • Plastics - Insert Injection Molding • Stampings - High Volume • Machining - CNC Milling & Turning

A contract manufacturer offering Precision Metal Stampings (45-400 tons), Fineblanking (100-630 tons), insert molding, grinding, robotic mig welding along with other secondary operations. Serving the aerospace, HVAC, automotive, hand tools, industrial, small engine and other market segments from our IATF and ISO14001 Certified, 161,000 sq. ft. facility.



Quality Certifications: IATF • ISO 14001
PTR TOOL AND PLASTICS     Booth # 617
Service Categories: Tooling - Plastic Injection Molding • Molds & Moldmaking - Plastic • Molds & Moldmaking - Metal • Tooling - Models & Prototypes • Engineering & Technical Services

A leading supplier of world class, high precision thermoplastics injection mold tooling, zinc die-cast mold tooling, & molded components for today's elite industrial suppliers. PTR Tool & Plastics can provide you with complete turnkey custom injection molding & tooling solutions and can handle almost any project from concept through production. Design. Build. Run.

Quality Certifications: IATF 16949 • ISO 14001
R & H MACHINE PRODUCTS     Booth # 625
Service Categories: Screw Machining - Swiss/CNC Swiss • Screw Machining - Multi Spindle • Screw Machining • Machining - Multi Axis • Machining - Production

Offers multi-spindle Screw Machines and CNC Swiss Lathes, Tornos with capabilities up to 5/8" diameter. Additional capabilities include "value-added services" such as heat treat, plating, tube bending, welding and assembly.

Quality Certifications: ISO 9001-2015 • 5S • CAGE CODE • LEAN
RAPIDPROTO & DIVSYS INTERNATIONAL ICAPE     Booth # 501
Service Categories: Fabricating - Printed Circuit Boards • Testing - Printed Circuit Boards • Assemblies - Electronic • Engineering & Technical Services • Prototypes - Electronic

Originating from 40 years of PCB fabrication in the US, DIVSYS is a PCB expert providing PC Boards without the quality risks from any competition. DFM file analysis, Electrical (BBT) & in-house Class 3 laboratory in Indianapolis assures risk-free PCBs. In addition to PCBs, RapidProto, LLC - ICAPE, LLC can provide 1-3 day assembly services in our state-of-the-art facility. For a detailed quote please call 317-975-2060.

Quality Certifications: ISO 9001
RESOURCES FOR MFG. INC.     Booth # 616
Service Categories: Metrology - Equipment & Services

Value added distributor of metrology equipment and services.

Quality Certifications: ISO/IEC 17025
ROBERTS AUTOMATIC PRODUCTS INC.     Booth # 101
Service Categories: Screw Machining - Multi Spindle • Machining - CNC Milling & Turning • Machining - Precision CNC • Machining - Multi Axis • Screw Machining - Swiss/CNC Swiss

Offering precision production machining, featuring twin-spindle multi-tasking CNC turnmill centers and multi axis CNC cells, swiss, & multiple spindle screw machines.



Quality Certifications: ISO 9001:2008 • ITAR REGISTERED
ROBERTS MACHINE PRODUCTS     Booth # 502
Service Categories: Machining - CNC Milling & Turning • Screw Machining - Multi Spindle

We stand proudly on our commitment to provide customers 100% American made quality in every steel, aluminum and brass part we machine; for infrastructure, automotive, heavy equipment, material handling, lawn and garden, and many other markets.

Quality Certifications: ISO 9001
ROBIN INDUSTRIES INC.     Booth # 311
Service Categories: Rubber To Metal Bonding • Plastics - Injection Molding • Rubber - Compression Molding • Silicone / Rubber - Liquid Injection Molding • Rubber - Injection Molding

We are a custom molder of precision elastomeric and thermoplastic components. Prototype through production support, high quality engineering, custom material development, and in-house mold design and build capabilities. We service a wide variety of industries. FDA registered



Quality Certifications: ISO 9001 / ISO 14001 • ISO/TS 16949 • ISO 13485 • ITAR
ROMAN MFG./QUALITY NON-FERROUS FOUNDRY     Booth # 419
Service Categories: Castings - Aluminum • Castings - Brass • Castings - Electrolytic Copper • Castings - Non-Ferrous • Castings - Permanent Mold

Quality Non-Ferrous Foundry. We cast brass, bronze, copper and aluminum from single-part part runs to high volume. We also offer many finishing options to ship our customers which greatly reduces handling costs. www.qualitynff.com

Quality Certifications: ISO 9001:2008
SCHOONOVER INDUSTRIES INC.     Booth # 309
Service Categories: Laser Cutting • Fabricating - Stainless Steel • Fabricating - Sheet Metal • Fabricating - Steel • Welding & Weldments

Precision metal fabrication, including laser cutting, Mig/Tig welding, forming & stampings. Quality work & on-time delivery.

SEAL & DESIGN INC.     Booth # 420
Service Categories: Gaskets, Seals, Washers & O-rings • Die-Cutting • Laminating • Fabricating - Foam • Plastics - Injection Molding

A world-class manufacturing and distribution company specializing in all types of sealing products. Our product line includes gaskets, o-rings, seals, molded products, die-cut foams, and other products for all kinds of sealing applications. Supplying Automotive, Medical, Military, Aerospace, Electronics, Power Generation, Hydraulics markets and more.

Quality Certifications: ISO/TS 16949 • ITAR • NSF
SEALING DEVICES INC.     Booth # 133
Service Categories: Gaskets, Seals, Washers & O-rings • Rubber - Injection Molding • Shielding - EMI/RFI • Die-Cutting • Adhesives

Manufacturer/fabricator of gaskets, O-rings, EMI shielding, adhesives, seals, custom molded rubber, and sponge parts. Also, compression, transfer and injection molding on-site. In-house tooling. Authorized Distributors for Parker Seal, Chomerics, Gore, 3M, Rogers, Garlock, Flexitallic & Loctite. Veteran Owned, Small Business & ITAR registered. seals@sealingdevices.com



Quality Certifications: AS 9100 REV C • ISO 9001:2008 • MIL-I-45208 • MIL STD 45662
SEVEN RANGES MFG. CORP.     Booth # 303
Service Categories: Stampings - Deep Drawn Shells • Stampings - Heavy Gauge • Stampings - High Volume • Stampings - Progressive Die • Tanks - Small Cylindrical

We are a 4 to 1 ratio deep drawn metal stamping house that is well versed in carbon steel, stainless steel, aluminum, copper, & brass. We are known for heavy gauge, high volume stamping & can customize stamping jobs for medium volume, medium run & short run stamping jobs that will fit a customer's budget & time frame. For additional information please contact Kurt Fogle at 330-627-7155, ext. 105 or kurt@sevenranges.com.



Quality Certifications: ISO 9001-2015 • DOD REGISTERED
SHERBROOKE GEAR WORKS INC.     Booth # 115
Service Categories: Gears • Gearboxes • Machining - Conventional CNC • Fabricating - Heavy Steel & Plate

Custom gear boxes & Gears, Gear fabricating from 1/4" to 80" in diameter with quantities from 1 to 10,000 plus. Heavy machining & welding fabricating with CNC equipment.

SMC LLC     Booth # 421
Service Categories: Assemblies - Electronic • Assemblies - Turnkey • Cable & Wire Manufacturing • Assemblies - Electromechanical • Assemblies - Printed Circuit Boards

Your one stop electronics manufacturing solutions company. We excel in supporting customers who are in need of need engineering service support, quality circuit board manufacturing, complex wire harness and cable assembly, system integration solutions, in-house test development, domestic and International supply chain management programs, and a global alliance MFG options.

Quality Certifications: ISO 9000:2001 • ISO 13485 • FDA REGISTERED • IPC/WHMA-A-620
SMITH & RICHARDSON INC.     Booth # 209
Service Categories: Screw Machining - Swiss/CNC Swiss • Machining - CNC Milling & Turning • Machining - Precision CNC • Machining - Multi Axis • Stampings - Progressive Die

Precision Swiss CNC, CNC milling/turning, Vertical/Horizontal machining, Progressive Die Stamping and Slide Forming. Complex turned/milled products in all metals. Progressive Die Stamping up to 110 tons. Serving the aerospace, hydraulic, IT, Instrumentation, Medical, Sporting Goods, and Transportation industries.



Quality Certifications: ISO 9001:2015
SOLAR ATMOSPHERES     Booth # 117
Service Categories: Heat Treating • Brazing - Vacuum Furnace • Nitriding

We offer high quality Vacuum Heat Treating services producing bright, scale-free parts with minimal distortion. Markets served include aerospace, medical, power generation, firearms & ordnance, and more. Our state-of-the-art vacuum furnaces range from lab sized to 48 feet. Four plants located in Eastern, PA, Western, PA, South Carolina, and California.



Quality Certifications: ISO 9001:2015 • AS 9100D • ITAR
SOUCY BARON     Booth # 218
Service Categories: Rubber Molding • Rubber To Metal Bonding • Prototypes - Rubber

Custom molding of engineered precision rubber components with specialization in NVH (Noise, Vibration, Harshness). Markets served: personal protective equipment, lawn & garden equipment, agricultural, aggregate & mining equipment, defense, automotive & powersport industries. Custom compounding of all thermoset elastomers. Product design & testing services available. Worldwide locations.



Quality Certifications: ISO 9001:2015
SOUTHERN SPRING & STAMPING INC.     Booth # 123
Service Categories: Springs - Coil • Stampings - Metal • Laser Cutting • Bending - Custom • Fabricating - Sheet Metal

Custom Compression, Extension & Torsion Springs. Wire Forms, Stampings, Fourslide parts, Progressive Die, In-House Tool & Die, Precision Sheet Metal Fab, Fiberoptic Laser Cutting & Machining. Grinding, Shot-peening, Powder Coating, Painting & Silk Screen Printing. Prototypes to production. Please follow us on Instagram. Visit our website for a free quote.

Quality Certifications: ISO 9001 • ITAR REGISTERED • BELL HELICOPTER APPROVED
SPENCE TECHNOLOGIES INC.     Booth # 607
Service Categories: Machining - CNC Milling & Turning • Machining - Stainless Steel • Machining - Aluminum • Laser Engraving • Assemblies

Over 100 years of combined experience available to help machine the quality parts you desire. Since 1996, Spence Technologies has provided companies in Northeast Ohio and throughout the United States with precision CNC Milled and Turned machined parts. We provide custom made parts along with full production runs from a variety of materials.

STAUB MANUFACTURING SOLUTIONS     Booth # 423
Service Categories: Fabricating - Sheet Metal • Laser Cutting • Fabricating - Stainless Steel • Laser Machining • Stampings - Metal

Trusted contract metal fabrication. Hit your objectives, keep your promises, grow your company. Mid to high volume production of fabricated metal components and assemblies. 99.2% quality rating & 96% on time delivery.

Quality Certifications: ISO 9001:2008
STEWART EFI LLC     Booth # 201
Service Categories: Stampings - Deep Drawn Shells • Stampings - Progressive Die • Stampings - Fourslide

A mfgr. of medium-to-high volume precision progressive die stampings; deep-drawn, slide-formed components; wire forms; & multi-component assemblies. In-house design & tool building, reel-to-reel stampings, transfer press & secondary tapping, welding, staking, screw insertion, value-added plating, heat treating, & secondary processes. Facilities located in CT & TX.



Quality Certifications: ISO/TS 16942:2009 • ISO 9001:2008
SURFACE FINISHES     Booth # 106
Service Categories: Optical Polishing • Lapping • Machining - Single Point Diamond • Grinding - I.D. & O.D. • Metrology - Equipment & Services

Precision Finishing, Fabrication and Refurbishment Services, Chemical Mechanical Polishing, Optical Quality Polishing, Precision Lapping, Single Point Diamond Machining, and Precision Low Stress Grinding. See our website for typical results.



Quality Certifications: ITAR REGISTERED
SWOOSH TECHNOLOGIES     Booth # 124
Service Categories: CAD/CAM Software • Software For Job Shops & Manufacturers • CAD/CAM Training • Measurement - Software • 3D Printing

Partnered with manufacturing leaders - including Siemens PLM, Mentor Graphics, and Markforged, we deliver the best CAD/CAM/CAE and product data management solutions for your company and take an active role in the investments you make. Whether it’s engineering software, PLM training, or services, our engineers can help you tackle the most critical challenges.



TAYLOR-WINFIELD TECHNOLOGIES INC.     Booth # 320
Service Categories: Special Machinery - Design, Build & Rebuild • Welding - Resistance • Welding - MIG • Heat Treating • Welding - Robotic

A world leader in the design and manufacture of material joining equipment and systems. Complete design, engineering, assembly, wiring, testing, and field service capabilities. We focus on material joining, automated assembly, resistance welding, induction heating, arc welding, robotic & vision system integration, material handling, and copper/spare parts.

Quality Certifications: AWS • RWMA
TECHNICAL MAINTENANCE INC.     Booth # 315
Service Categories: Calibration & Metrology • Instrumentation & Controls • Measurement - Equipment • Metrology - Equipment & Services • Safety Certifications

A Woman Owned small business that has 8 full service calibration labs located around the United States, with plans to add additional locations in 2019. TMI labs are all ISO/IEC 17025 Certified through ANAB with additional certifications for ANSI/NCSL Z540-1 and ANSI/NCSL Z540.3 with a broad scope of capabilities.

Quality Certifications: ANAB • WBE CERTIFIED • ANSI/NCSL Z 540-1
TEMPCO MFG. CO. INC.     Booth # 138
Service Categories: Stampings - Metal • Fabricating - Sheet Metal • Assemblies - Mechanical • Welding & Weldments • Tools, Dies & Fixtures

With over 70 years of experience, Tempco produces precision metal stampings, precision sheet metal fabrications and mechanical assemblies for clients across numerous industries. Tempco offers a complete tool & die room to go along with secondary services to be your one stop shop for metal stampings and sheet metal fabrications.



Quality Certifications: AS9100D • ISO 9001:2015 • ISO 13485:2016
THE PHISTER EQUIPMENT CO. INC.     Booth # 511
Service Categories: Engraving • Laser Engraving • Stampings - Steel Marking • Laser Marking • Pad Printing

Phister Equipment with Telesis Marking Systems, is the leader in Direct Part Marking (DPM) Technologies. Telesis has been supplying the Automotive, Aerospace and Industrial markets with durable, fast, and innovative part marking systems for more than 40 years. Telesis is known for its industry leading line of PINSTAMP, SCRIBE and LASER marking and engraving systems.

THE RUBBER GROUP     Booth # 301
Service Categories: Rubber Molding • Die-Cutting • Rubber To Metal Bonding • Rubber - Injection Molding • Rubber - Transfer Molding

Twenty-five years of experience manufacturing custom and standard rubber products. Injection, transfer and compression molding from a variety of different materials including medical grade silicone, fluorosilicone, FKM, Neoprene, EPDM, HNBR, NBR and natural rubber.



Quality Certifications: ISO 9001:2015 • MIL-I-45208, MIL-I-9858 • FDA • ITAR
VIKING PLASTICS     Booth # 510
Service Categories: Plastics - Injection Molding • Assemblies • Plastics - Insert Injection Molding • Plastics - Two Shot Injection Molding • Pad Printing

We are a leading injection molding and value-added assembly service provider, delivering innovative products including sealing solutions, custom injection molding, assembly, and post-molding secondary services. We serve a variety of industries including functional and interior automotive, HVAC, specialty packaging, appliance, energy & battery cases, and filtration.

Quality Certifications: IATF 16949:2016 • ISO 14001:2015 • ISO 9001:2015 REGISTERED
VULCAN SPRING & MFG. CO.     Booth # 506
Service Categories: Springs - Flat • Springs - Coil • Stampings - Metal • Assemblies - Mechanical

The preferred global supplier of custom springs recognized for our superior capabilities from design through mass production. With innovative machinery, tooling and engineers, we can deliver a spring solution for even the most challenging applications.

Quality Certifications: ISO 9001:2015
WCS INDUSTRIES     Booth # 412
Service Categories: Springs - Coil • Cold Heading - Cold Forming • Wire Forming & Fabricating • Fasteners • Screw Machining - Multi Spindle

We are a custom manufacturer of metal components including precision mechanical springs, wire forms, retaining rings, cold formed components, CNC & multi-spindle machined products. Our component offerings are supported by our combined engineering & technical professionals. Our goal is to partner with our customers to provide the metal components they need.

Quality Certifications: ISO 9001:2015 • IATF 16949:2016
WEPCO PLASTICS INC.     Booth # 104
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Prototypes - Plastic • Plastics - Elastomeric Overmolding • Plastics - Insert Injection Molding

We are a family owned full-service mold making and plastic injection molding company offering American made parts. We specialize in rapid prototype onsite tooling and short to medium run plastic injection molding with 4 axis machining, fixturing, and secondaries.



X-CELL TOOL & MOLD INC.     Booth # 628
Service Categories: Plastics - Injection Molding • Plastics - Reel To Reel Molding • Plastics - Insert Injection Molding

A Manufacturer of high precision plastic injection mold and mold components. X-Cell Tool & Mold Inc. has capabilities for both product and mold design. We are an “S” Corporation with incorporation on 12/02/96 and we are also an ISO 9001:2015 and 13485-2016 company.

Quality Certifications: ISO 9001:2015 • ISO 9001 & ISO 13485


© 2017 The Job Shop Company • 16 Waterbury Road, Prospect, CT 06712 • (800) 225-4535