New England Design-2-Part Show
September 26 & 27, 2018
Royal Plaza Trade Center • Marlborough, MA



Search by Category

or

Search by Keywords


  Reset Search  



0 Exhibitors to Meet

Exhibitor List


Listed below are the current exhibitors and service categories of companies in the show.
This page is also an interactive tool for you to use when planning your personal visit.

[ 237 ] companies match your search.
FEATURED EXHIBITORS listed first alphabetically
A.W. MERCER INC.     Booth # 322
Service Categories: Fabricating - Sheet Metal • Coatings - Electrostatic Powder • Laser Cutting • Welding & Weldments • Assemblies - Mechanical

Specializes in sheet metal fabrications, tubular steel welded assemblies and in-house powder coating. We service the rail, material handling, HVAC and industrial markets with high quality and reasonably priced OEM parts. With lot sizes ranging from 1 to 1,000, A.W. Mercer offers custom solutions to its ever increasing customer base.

www.awmercer.com

Quality Certifications: AWS D1.1 • AWS D1.3 • AWS D1.6 • AWS D17.1
ACCURATE METAL FINISHING LLC     Booth # 331
Service Categories: Metal Finishing - Anodizing • Metal Finishing - Electropolishing • Metal Finishing - Hard Coating • Metal Finishing - Chromate • Metal Finishing - Passivating

Now under new Ownership. Accurate Metal Finishing LLC has been successfully operating since the late 60's; we now look forward to operating and growing to our full potential offering large and small capacity finishing of Aluminum and Stainless steel including Anodizing Type II and Type III, Chromate, Electropolishing and Passivation.

www.accuratemetalfinishing.com

Quality Certifications: ISO 9001 • LOCKHEED MARTIN • BAE APPROVED
ACE WIRE SPRING & FORM CO. INC.     Booth # 219
Service Categories: Springs - Coil • Wire Forming & Fabricating • Wire Straightening • Assemblies - Mechanical • Hooks

CUSTOM "Spring & Wire Form Specialists" – Incorporating the newest CNC equipment technology to manufacture compression, extension, torsion springs, complex wire forms, and spring assemblies. Consistent quality, lower costs, on-time deliveries, and Design Engineering Assistance. Prototypes to production - Family owned & operated since 1939. Let ACE be your problem solver.

www.acewirespring.com

Quality Certifications: ISO 9001:2015 ITAR REGISTERED • MIL-SPEC 45208
ADRON TOOL CORP.     Booth # 103
Service Categories: EDM • EDM - Wire • EDM - Sinker • EDM - Small Hole Drilling • Machining - Production

Wire EDM specialists with over 50 CNC mach., CNC (sinker) std. EDM; largest capacity, 40"x32"x18", workpiece wt. 10,000 lbs., 27-1/2" thick; metal parts rapid prototyping svc. and prod. runs of complex, contoured shapes in tough to mach. or exotic mtl.; CNC production machining, coord. measuring sys., SPC, OGP optical non-contact measuring.

www.adron.com

Quality Certifications: ISO 9001:2008 • AS 9100 • NADCAP AS7116
ALPHA GRAINGER MFG. INC.     Booth # 504
Service Categories: Machining - CNC Milling & Turning • Machining - Multi Axis • Machining - Rotary Transfer • Tooling • Screw Machining - Swiss/CNC Swiss

A precision machine shop, with a state-of-the-art 90,000 sq. ft. manufacturing facility in Franklin, MA. Alpha Grainger Mfg. Inc. has 20 INDEX/Traub mill turn centers, with a wide range of capability for high speed complex part manufacturing. More than 100 machining centers in house. AS9100C, ISO 9001:2008, ITAR, and FFL in hand. Full CMM, Laser, Vision, and Video.

www.agmi.com

Quality Certifications: AS 9100C:2009-01 • ISO 9001:2008 • ITAR • F.F.L.
AMCO POLYMERS     Booth # 550
Service Categories: Plastics - Raw Materials • Plastics - Injection Molding • Plastics - Blow Molding • Materials - Plastic • Plastics - Compounds

We are a resin distributor, global custom formulator of UL Listed engineering thermoplastics, and custom compounder. Amco Polymers was founded in 1955 with a philosophy based on helping customers find solutions to problems and a commitment to continuous improvement.

www.amcopolymers.com

Quality Certifications: UL CERTIFIED • ISO 9001 CERTIFIED • RoHS
AMERICAN TOOL CO.     Booth # 402
Service Categories: Machining • Machining - Large Parts • Welding & Weldments

Celebrating 100 years providing quality machining services! American Tool Company specializes in large diameter and one-off parts. If you are looking for a machine shop that works on difficult parts on a daily basis you have found us. We take pride in our dedication to producing quality parts and meeting or exceeding delivery deadlines.

www.americantoolcompany.com

Quality Certifications: CAGE CODE • MIL-I-45208A
ANTRON ENGINEERING & MACHINE CO. INC.     Booth # 447
Service Categories: Machining - CNC Milling & Turning • Assemblies - Electromechanical • Screw Machining - Swiss/CNC Swiss • Prototypes - Machining • Machining - Production

We are one of the nation’s leading precision machining and product assembly companies. An innovator in contract manufacturing and a value-added partner to the world’s leading original equipment manufacturers. Specializing in CNC Precision Parts & Prototypes through Production, Assemblies, Screw Machine Products, Swiss CNC, Single Side Lapping, Electromechanical Assemblies, Brazing, Vacuum Brazing, Milling Vertical & Horizontal, turning. 3D ABS Prototypes, Forward & Reverse Engineering, Contract Manufacturing, Spin Balancing, Laser Marking, Private Labeling, Drop Shipments & Inventory Reduction.

www.antroneng.com

Quality Certifications: AS 9100D • ISO 9001:2015 • ITAR • FFL, FDA & UL REGISTERED
APPLE RUBBER PRODUCTS     Booth # 216
Service Categories: Gaskets, Seals, Washers & O-rings • Rubber Molding • Rubber To Metal Bonding • Silicone / Rubber - Liquid Injection Molding • Prototypes - Rubber

Manufacturer of elastomeric parts. O-Rings; MicrOrings to MacrOrings, AS568 & ISO 3601 (search inventory from our Website). We design & manufacture custom, rubber bonded to plastic, metal & filter materials, and medical rubber parts. Our services include engineering, design assistance & QC testing & reporting, from prototype to Production. Class 7 (10,000) clean room.

www.applerubber.com

Quality Certifications: ISO 9001 • AS 9100
APPLIED GRAPHICS INC.     Booth # 547
Service Categories: Labels, Tapes & Decals • Screen Printing • Pad Printing • Powder Coating • Laser Marking

A custom product ID manufacturer specializing in industrial labels, silkscreening, pad printing, laser marking, spray painting, powder coating, and EMI shielding for medical, military, semiconductor and high tech OEM industries.

www.appliedgraphics.com

Quality Certifications: ITAR REGISTERED • ISO 9001:2008 • UL APPROVED / UL CERTIFIED • RoHS / REACH
ASH INDUSTRIES     Booth # 238
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Plastics - Rotational Molding • Plastics - Hot Stamping & Screening • Prototypes - Plastic

Engineered for You. In-House MIM, Thermoplastic, and Silicone Injection & Rotational Molding & Tooling as well as cast epoxy components & 7-Axis Swiss Lathe production. Molding includes custom inserts & over-molding, two shot molding. Component assembly, secondary processing & decorating, utilizing the latest in CNC, EDM & Modeling technology.

www.ashindustries.com

Quality Certifications: ISO 9001 • ISO 7 CLASS 10K CLEAN ROOM
CAMBRIDGE - DIVISION OF PACE INDUSTRIES     Booth # 205
Service Categories: Castings - Die • Machining - Castings • Metal Finishing - Painting • Assemblies - Electromechanical • Assemblies - Turnkey

Complete (1) Source Responsibility for Contract Manufacturing, Electromechanical Fabrication, Design Engineering, Prototype Development, Machine from Solid, Medium to High Volume Production, Secondary Machining, Powder Coating, Wet Painting, Silk Screening, Chromating, Impregnating, Pressure Testing, Complete Mechanical Assembly, Sourcing, Warehousing & Worldwide Shipping.

www.paceind.com/landings/cambridge.php

Quality Certifications: ISO 9001:2008 • ISO 14001-2004
CARTERET DIE CASTING     Booth # 147
Service Categories: Castings - Die • Castings - Die, Zinc • Castings - Zinc • Castings - Die, Aluminum • Castings - Aluminum

Specialists in precision zinc and aluminum die castings from one gram to four pounds. Secondary machining & finishing to your specs. No minimum quantities. Competitive pricing. Casting Zinc components in all Zamak alloys including ZA #8 and EZAC. Casting Aluminum components from ounces to five pounds in 380 and K alloys.

www.carteretdiecasting.com

Quality Certifications: ISO 9001
CENTRAL COATING CO. INC.     Booth # 510
Service Categories: Shielding - EMI/RFI • Plastics - Painting • Metal Finishing - Painting • Coatings - Conformal • Coatings

Since 1970, the East Coast’s largest provider of Engineered Solutions, specializing in EMI/RFI, PCB Conformal Coatings, Low Pressure Encapsulation and Potting. Decorative Painting, Mil-Spec Coatings, Pad Printing, Direct Inkjet Printing, Silk Screening, and Laser Etching. FIP gaskets (conductive/non-conductive). Electro-Mechanical Assembly, Soldering, Supply Chain Management, Kanban, Machining, ISO 9001-2015; UL Recognized & ITAR.

www.centralcoating.com

Quality Certifications: ISO 9001:2015, ITAR REGISTERED • RoHS • UL RECOGNIZED • MIL-STD
CERAMCO INC.     Booth # 304
Service Categories: Ceramics - Injection Molding • Ceramic Parts • Fasteners • Machining - Ceramics • Grinding - Ceramics

Custom technical ceramics and stock solid ceramic fastener manufacturing. Injection molding as small as 0.05 grams. Additive manufacturing for both rapid prototyping and production quantities, materials formulation, tooling and machining. ISO 9001 and ITAR certified. U.S. owned and based in NH.

www.ceramcoceramics.com

Quality Certifications: ISO 9001:2015 • ITAR REGISTERED • SAM REGISTERED
CHEMTEC     Booth # 356
Service Categories: Chemical Milling • Photochemical Etching & Machining • Nameplates, Dials & Panels • Springs - Flat • Stampings - Short Run

Chemically machine/mill precision parts for a wide variety of industries. Prefer intricate, highly complex geometric thin configurations. ITAR Compliant.

www.chemtecusa.com

Quality Certifications: ISO 9001:2008
CIRTRONICS CORPORATION     Booth # 518
Service Categories: Assemblies - Electromechanical • Assemblies - Printed Circuit Boards • Assemblies - Mechanical • Assemblies - Turnkey • Systems Integration

Contract manufacturing for quality-sensitive projects. Precision Engagement® means we tailor our services, processes and communications to your unique needs. And, as an ESOP company, our culture of ownership shows in everything we do. What can we build for you? Serving customers in the robotics, medical, industrial and defense/security markets (WBE/WOSB).

www.cirtronics.com

Quality Certifications: ISO 9001 • ISO 13485 • AS 9100 • ITAR & FDA REGISTERED
COONER WIRE     Booth # 403
Service Categories: Wire & Cable Harnesses • Assemblies - Cable • Electronics - New Product Development • Plastics - Injection Molding • Prototypes - Electronic

We maintain the world's largest inventory of flexible wire and custom cables. Cooner Wire utilizes both standard and unique wire constructions that range in size from 42 AWG mini coax to 4/0 AWG Extra Flexible Power Cable; from silicone cable to shielded cable, hookup wire to molded cable assemblies, Cooner Wire remains the first choice in specialty wire and cable design.

www.coonerwire.com

Quality Certifications: ISO 9000:2008 • ITAR, FDA & UL REGISTERED • RoHS / REACH • CAGE CODE
CORD MASTER ENGINEERING CO. INC.     Booth # 444
Service Categories: Wire & Cable Harnesses • Assemblies - Cable • Assemblies - Electromechanical • Assemblies - Electrical • Plastics - Insert Injection Molding

An IS09001, AS9100 and HUBZone Certified contract manufacturer of complex wire harnesses, cable assemblies, and electro-mechanical assemblies to the most demanding specifications. With our molding and overmolding capabilities CME is focused on the design and manufacture of custom LSZH cables & cords for both commercial and military uses.

www.cordmaster.com

Quality Certifications: ITAR REGISTERED • ISO 9001 / AS 9100 • HUBZONE CERTIFIED • VOSB
DB ROBERTS     Booth # 201
Service Categories: Fasteners • Electronic Hardware • Assembly Hardware • Levers, Knobs & Handles • Masking

Since our inception, we have been focused on providing solutions for fastener applications in Sheet Metal Fabrication, Metalworking, and Industrial Electronics. Our "Superior Customer Service" and "Commitment to Excellence" have proven to be a winning formula fueling innovation and rapid growth year after year.

www.dbroberts.com

Quality Certifications: ISO 9001:2015 • AS 9120B
EMPIRE GROUP     Booth # 302
Service Categories: Prototypes - Models • Industrial Design Services • Rapid Prototyping • Machining - CNC Milling & Turning • Castings - Rubber Mold

We provide the highest quality design, engineering & prototyping solutions to a variety of industries. Our experienced team of professionals approach all projects with integrity, ingenuity & a commitment of exceeding expectations. Leaders in prototype models, industrial design, rapid prototyping, engineering, CNC milling & turning, mold & casting, and much more.

www.empiregroupusa.com

Quality Certifications: ISO 9001:2015 • ITAR
ET PRECISION OPTICS INC.     Booth # 411
Service Categories: Optical Components • Machining - CNC Milling & Turning • Machining - Precision CNC • Screw Machining - Swiss/CNC Swiss • Machining - Multi Axis

Multi-Axis precision machining 5 thru13 axis. We have built a reputation for manufacturing difficult multi-axis parts. Our mission is to provide solutions that are cost effective meeting the most stringent quality standards in the precision component industry. Please send all inquires to sales@etprecision.com.

www.etprecision.com

Quality Certifications: ITAR • ISO 9001:2008 • CONTROL PLANS
EVS METAL     Booth # 226
Service Categories: Fabricating - Sheet Metal • Electronic Enclosures • Assemblies - Electromechanical • Metal Cabinets & Enclosures • Machining

Precision sheet metal fabricator specializing in electronic enclosures, CNC punching, laser cutting, machining, forming, robotic forming, welding, assembly, in-house automated powder coating, & extensive design services. Proficient in Solidworks and PRO-E. With automated lights out punching & forming capabilities, we are adept at handling prototypes through production.

www.evsmetal.com

Quality Certifications: ISO 9001:2015
EXCELL SOLUTIONS     Booth # 309
Service Categories: Machining - CNC Milling & Turning • Machining - Precision CNC • Prototypes - Rapid Sheet Metal • Machining - Stainless Steel • Fabricating - Sheet Metal

Formed from the marriage of a local machine shop & sheet metal shop, we are fully equipped on both fronts to provide high precision parts, fast. Over the years we have evolved, to best support businesses in the New England area & all around the US. We are often able to help our customers reduce project lead times and overhead by simplifying manufacturing ordering processes, consolidating suppliers, fast response in manufacturing emergencies, and offering support for R&D, product development, and production.

www.excellsol.com

Quality Certifications: ISO 9001:2015 • ITAR
F.H. PETERSON MACHINE CORP.     Booth # 248
Service Categories: Machining - Conventional CNC • Machining - Precision CNC • Prototypes - Machining • Machining - Large Parts • Grinding - Rotary Surface

Precision and general machining - Blanchard Grinding - MIG & TIG welding - I.D. and O.D. Cylindrical Grinding - CNC Milling and Turning - prototype to short run production. 5 Axis Milling. Large part capacities up to 14,000 lbs. Rapid turnaround repair work and reverse engineering.

www.fhpetersonmachine.com

Quality Certifications: ISO 9001:2015 • ITAR REGISTERED
FOX VALLEY SPRING LLC     Booth # 141
Service Categories: Springs - Coil • Springs - Flat • Wire Forming & Fabricating • Stampings - Fourslide • Stampings - Short Run

Manufacturer of custom springs, wire forms and metal forms. We utilize SPC systems, CNC coilers and experienced craftsmen to assure consistent quality. Design assistance and rush orders are welcome. Wisconsin Grand Manufacturer of the Year. We Quality Certify each process & provide a total Value-added supplier package. 10 piece minimum for custom spring and wire forms.

www.foxvalleyspring.com

Quality Certifications: ISO 9001:2008 • ITAR CERTIFIED
G & R MFG.     Booth # 524
Service Categories: Stampings - Deep Drawn Shells • Stampings - High Volume • Stampings - Short Run • Assemblies • Prototypes - Stamping

Supplies basic stampings and eyelets to intricate multi-component assemblies all with the service and quality you expect from a world class manufacturing company. Established in 1972, G & R Manufacturing has transformed into a full service "turn key" manufacturing facility from prototype to production.

www.grmanufacturing.com

Quality Certifications: ISO 9001-2015 • ANAB • ITAR CERTIFIED
GPR COMPANY INC.     Booth # 528
Service Categories: Machining - CNC Milling & Turning • Machining - Multi Axis • Machining - Large Parts • Machining - Conventional CNC • Machining - Weldments

Specializes in precision CNC machining. With a multitude of vertical, horizontal, and multi-axis mill/turn machines, we can handle even the most complex parts. Companies have come to rely on GPR for repeatable quality and a stellar reputation. With diverse size capabilities, we can machine anything from small parts to those as large as 6' x 6' x 16'.

www.gprco.com

Quality Certifications: ISO 9001:2015 • ITAR
HARDWARE SPECIALTY CO. INC.     Booth # 310
Service Categories: Fasteners • Electronic Hardware • Adhesives • Assemblies - Electrical • Assembly Hardware

Our SAE AS9120 Registered Quality Management System and full service Quality Assurance facilities coupled with many years of technical sales experience and deep product line inventory ensure our commitment to total customer satisfaction. Together these make Hardware Specialty an unbeatable source for all your fastener and electronic component requirements.

www.hardwarespecialty.com

Quality Certifications: SAE AS9120 • ISO 9001:2008 • ISO 14001 • MIL STD 45662A
HOWARD ENGINEERING LLC     Booth # 145
Service Categories: Eyelets & Drawn Shells • Stampings - Deep Drawn Shells • Stampings - Metal

Deep drawn shells from all materials. All types of eyelet products. High volume stampings from multiple die progressive presses. Specialists in drawing stainless steel.

www.howardengineering.com

Quality Certifications: ISO 9001:2015
JET PRECISION METAL INC.     Booth # 513
Service Categories: Fabricating - Sheet Metal • Machining - Precision CNC • Metal Cabinets & Enclosures • Electronic Enclosures • Prototypes - Fabrication

We are a full service sheet metal fabrication facility and we have proudly served our customers providing reliable, quality service since 1986. We specialize in fabricating electronic enclosures, brackets, chassis, custom panels, tubular frames and electro-mechanical assemblies.

www.jetprecision.com

Quality Certifications: ISO 9001:2015
LABO CIRCUITS INC.     Booth # 502
Service Categories: Fabricating - Printed Circuit Boards • Prototypes - Electronic

We are a printed circuit board manufacturer, since 1989. We have the best prices in Canada, fast turnaround times and consistent quality. We have sophisticated in-house software for tracking each order and more. We offer full CAM Analysis services. We have high-tech equipment, & can produce prototypes and high volume. OUR RELIABILITY, YOUR SUCCESS!

www.golabo.com

Quality Certifications: UL CERTIFIED • ISO 9001-2008 • RoHS • IPC
LASER PROCESS MFG. INC.     Booth # 409
Service Categories: Laser Cutting • Laser Engraving • Laser Drilling • Laser Marking • Laser Machining

Over 40 years experience in Precision Laser Cutting, Drilling, Scribing, Marking & Etching of Metals, Alloys, Composites, Prototypes through Production. Fast turn around! No premium charges! Same day quotes!

www.laserprocessmfg.com

Quality Certifications: ISO 9002 • AS 9000
LIGHT METALS COLORING CO. INC.     Booth # 101
Service Categories: Metal Finishing - Anodizing • Metal Finishing - Hard Coating • Metal Finishing - Phosphating • Laser Marking • Metal Finishing - Dry Lubrication

Bulk, rack, hardcoat anodizing - all colors, sizes .050" up to 15 feet. Other services include - Manganese Phosphating (Steel), dry film lubricants, passivation, chromate conversion coatings, Laser Marking & plating. One of the largest anodizers & metal finishers in the USA.

www.lightmetalscoloring.com

Quality Certifications: ISO 9001:2000 • NADCAP APPROVED
LYNN WELDING     Booth # 553
Service Categories: Welding - TIG Aluminum • Welding - Resistance • Machining - CNC Milling & Turning • EDM - Wire • Machining - Precision CNC

A NADCAP accredited, LCS approved and AS 9100 certified welding shop specializing in GTAW Welding, Resistance Welding and Brazing. Lynn Welding also houses a state-of-the-art CNC machining and tool making department; 4-axis milling, Wire EDM and Turning capabilities. Our ability to weld, machine and fabricate entire assemblies is what makes us truly unique. Serving the Aerospace, Defense, Nuclear, Industrial, and Medical industries.

www.lynnwelding.com

Quality Certifications: AS9100/ISO 9001:2000 • NADCAP • MIL-W-6858D • AWSD17.1
MAKUTA TECHNICS INC.     Booth # 507
Service Categories: Plastics - Micro Molding • Plastics - Two Shot Injection Molding • Molds & Moldmaking - Plastic • Prototypes - Plastic • Tooling - Plastic Injection Molding

Specializing in micro injection molding and micro mold tooling, Makuta Technics Micro Molding produces millions of zero-defect micro parts each month for customers in the medical, pharmaceutical, microfluidics, electronics/office automation and automotive industries.

www.makuta.com

Quality Certifications: 6 SIGMA • ISO CLASS 8 CLEAN ENVIRONMENT • ISO 9001:2015
MJM MARGA LLC     Booth # 516
Service Categories: Stampings - Deep Drawn Shells • Stampings - Micro-Miniature • Stampings - Short Run • Stampings - Progressive Die • Stampings - Ferrous & Non Ferrous

Specializes in the production of precision prototype and high volume drawn metal products. Our engineering department is familiar with numerous design requirements and capable of developing solutions for any production needs. Our personnel have extensive experience working with numerous materials and drawing shells up to 3.50" in length.

www.mjmmarga.com

Quality Certifications: ISO 9001:2008 • MIL-I-45208A
O.W. LANDERGREN INC.     Booth # 115
Service Categories: Metal Spinning • Fabricating - Sheet Metal • Prototypes - Fabrication • Tanks - Small Cylindrical • Fabricating - Stainless Steel

Because of our diverse capabilities, with metal spinning being our mainstay, we then can apply our value added processes including general machining, fabrication, welding, brazing, punching, heat treating, sanding, buffing, riveting, press inserting, assembly work & special packaging, to offer our customers a full package deal.

www.owlandergren.com

Quality Certifications: MIL-I-45208 • MIL-STD-45662
ONSHAPE     Booth # 335
Service Categories: CAD/CAM Software

A modern CAD system that eliminates design gridlock and helps engineers do their best work. Onshape unites advanced modeling tools and design data management in a secure cloud workspace that has rapidly become the primary CAD system for thousands of companies worldwide.

www.onshape.com

PENCOM     Booth # 319
Service Categories: Fasteners • Machining - CNC Milling & Turning • Screw Machining • Material Handling • Assemblies - Mechanical

Global source for custom and standard fasteners; mechanical components and thermal management solutions. Our motto: Manufacturing Globally - Supplied Locally captures our ability to provide customers with low-cost production advantages and inventory automation capabilities from our twenty-five global facilities.

www.pencomsf.com

Quality Certifications: ISO 9001 • RoHS
PMF INDUSTRIES INC.     Booth # 442
Service Categories: Stampings - Deep Drawn Shells • Fabricating - Stainless Steel • Cold Drawn Steel Profiles - Cold Rolled Steel • Cold Forming • Fabricating - Sheet Metal

Our unique combination of flowforming with other metalworking processes, provides cost-saving solutions to your specific requirements. Our manufacturing experience in aerospace, defense, power generation, micro-electronics, and many other applications, utilizing stainless steel, high-temperature alloys, and other metals, can deliver the end-products you require.

www.flowformingplus.com

Quality Certifications: NADCAP NON DESTRUCTIVE TESTING • NADCAP CERTIFIED HEAT TREATING • NADCAP CERTIFIED: WELDING • AS 9100 / ISO 9001
PODMORE MANUFACTURING INC.     Booth # 552
Service Categories: Machining - Precision CNC • Screw Machining - Escomatics • Screw Machining - Swiss/CNC Swiss

Swiss Escomatic & CNC Screw Machines producing miniature precision parts for electronics, computer, medical, areospace, defense, automotive, and more. If you demand strict tolerances and repeatability, call us. We routinely deliver 0.0005 inch (.0125 mm) total tolerance on parts with a major diameter ranging from .0065 inches (.254 mm) to .500 inches (12.70 mm).

www.podmoremfg.com

Quality Certifications: ISO 9001 • ISO 9001:2015 • TUV
PRECISION FINISHING SERVICES     Booth # 439
Service Categories: Metal Finishing - Tumble & Vibratory Polishing • Blasting • Surface Finishing

Providing Metal Finishing and polishing including but not limited to vibratory, mechanical deburring and abrasive blasting.

www.precisionfinishingservices.com

Quality Certifications: AS 9100:2004 REV B • ISO 9100/2000 • FAA APPROVED • PWA36905
QUANTUM LEAP ENGINEERING INC.     Booth # 533
Service Categories: Educational Services • Engineering & Technical Services • Lean Manufacturing Consulting • Automation • Certification Services

A Result Oriented Group of subject matter experts (SME) to train employees in Lean Six Sigma (LSS) , Design for Excellence (DfX),CAD/CAM and ISO/QS/TS to implement solutions for improving quality, productivity, compliance and reducing product/overhead costs. Quantum Leap Engineering can assist companies in applying for State Grants.

www.sixsigmapluslean.com

Quality Certifications: LEAN SIX SIGMA • SME • SIX SIGMA • LEAN MFG.
RAO MANUFACTURING CO.     Booth # 408
Service Categories: Stampings - Deep Drawn Shells • Fabricating - Sheet Metal • Welding - MIG • Welding - TIG Aluminum • Assemblies - Stamped

Specializing in Deep Drawing, Metal Stamping, Sheet Metal Fabricating, Assembly, Tooling, and Tank Heads since 1926. 215,000 square feet, 200+ dedicated employees. We excel in: Collaboration, Design Assistance, Forming Simulation, Customer Service, Quality, OTD. Capabilities include: Draw Forming, Metal Stamping, Laser, Turret, Press Brake, Welding, Assembly, and Tooling.

www.raomfg.com

Quality Certifications: AWS D1.3 • ISO 9001:2015
RAZOR TOOL INC.     Booth # 500
Service Categories: Machining - Multi Axis • Machining - CNC Milling & Turning • Tools - Cutting • Laser Marking • Machining - Stainless Steel

Produces machined parts and cutting tools for a variety of manufacturing companies from different industries. Our customers are OEM's who need high quality machined parts for the machinery production as well as catalog cutting tool companies who need standard tool made to print. We also provide regrinding and special form tools to job shops.

www.razor-mill.com

Quality Certifications: ISO 9001:2015
SMALLEY     Booth # 234
Service Categories: Snap Rings & Retaining Rings • Springs - Coil • Springs - Wave • Springs - Flat • Fasteners

We are the exclusive manufacturer of the industry-leading Spirolox® Retaining Rings, an innovative design that features a no gap, 360° retaining surface without protruding ears to interfere with mating components. We are also the originator of Crest to Crest® Wave Springs which save up to 50% of space compared to conventional coil springs.

www.smalley.com

Quality Certifications: ISO 9001 & ISO 13485 • IATF 16949 • AS 9100 • ISO 14001
SMITH & WESSON PRECISION COMPONENTS     Booth # 320
Service Categories: Plastics - Injection Molding • Plastics - Insert Injection Molding • Forgings - Closed Die • Heat Treating • Metal Finishing - Plating

SWPC is one America's oldest most iconic brands. For more than 160 years, our skilled precision craftsmen have created some of the finest high-performance firearms made. Smith & Wesson Precision Components now offers this craftsmanship to manufacturers looking for this same reliability. Put a legend on your line! For information on Forging, Heat Treating & Finishing please call 413-747-3613, and for Plastics call 860-526-3200.

www.swpc.com

Quality Certifications: ISO 9001:2008
SMT-ASSY ELECTRONIQUE     Booth # 555
Service Categories: Assemblies - Electronic • Assemblies - Turnkey • Assemblies - Electromechanical

Now, more than ever, small to medium size companies have limited resources. When you work with us we become your manufacturing partner, saving your company's resources so you can use them to focus on future designs, marketing, and sales. As a leader in SMT assembly, we can assemble your electronic board level assemblies and/or your electro-mechanical assemblies and ship them whenever, wherever, and however you want!

www.smt-assy.com

Quality Certifications: ISO 9001:2015
SPRINGFIELD SPRING CORP.     Booth # 542
Service Categories: Stampings - Fourslide • Springs - Coil • Wire Forming & Fabricating • Assemblies • Prototypes - Fabrication

Validated Processes for Medical. Practicing Lean / SIX Sigma company. Certified Minority-Owned Business (MBE). Manufacturing precision engineered compression springs, extension springs, torsion springs, wire forms, fourslide stampings. Prototypes, EDM, Tooling, and Engineering Design Assistance. 24 - 48 hr. quote response.

www.springfieldspring.com

Quality Certifications: ISO 13485 MEDICAL REGISTERED • ISO 9001 INDUSTRIAL REGISTERED • MBE CERTIFIED
TECH-ETCH INC.     Booth # 253
Service Categories: Chemical Milling • Photochemical Etching & Machining • Shielding - EMI/RFI • Circuits - Flexible • Assemblies - Circuits

Photoetching services featuring specialty materials: tungsten, titanium, polyimide, elgiloy, molybdenum & nitinol. Flexible circuits manufacturer featuring fine line technology, microvias & SMT Assembly. EMI/RFI shielding products manufacturer specializing in beryllium copper spring fingers, conductive fabric gaskets & knitted wire mesh.

www.tech-etch.com

Quality Certifications: ISO 9001:2008 • AS 9100 REV C
TIER ONE LLC     Booth # 517
Service Categories: Machining - Precision CNC • Assemblies - Electromechanical • Screw Machining - Swiss/CNC Swiss • Machining - Multi Axis • EDM - Wire

We have 50 plus years’ experience providing precision machining and manufacturing, packaging and assembly solutions for function critical, highly engineered parts and assemblies. Tier ONE is an expert in process enhancements to improve product quality and reliability, as well as cost saving strategies including lean manufacturing and effective inventory management.

www.tieronemachining.com

Quality Certifications: AS 9100D, ISO 9001:2015
TUTCO     Booth # 410
Service Categories: Heating Elements - Custom • Heating Elements - Electric • Heaters - Custom • Assemblies - Electrical • Fans & Blowers

The world's largest supplier of open coil heating elements. We produce 35,000 to 38,000 heaters a day to meet the demands of our OEM customers. Leading the world in heating innovation, Tutco holds 80% of the U.S. Patents in open coil heating technology. Tutco heating components can be found in countless commercial applications, including refrigeration, HVAC, appliance, lab equipment and vending. We can quickly bring your project from concept to completion.

www.farnam-custom.com

Quality Certifications: ISO 9001:2008 • ISO 14001:2004 • OHSAS 18001:2007
ULTIMAKER NORTH AMERICA     Booth # 503
Service Categories: 3D Printing • Rapid Prototyping • Rapid Prototyping - Equipment

Ultimaker North America has the vision to make 3D printing accessible to all. It is why all of our desktop printers are extremely quiet, fast, accurate, reliable and effortless to use, embraced by professionals and novices alike. Ultimaker is one of the most successful and reliable open source 3D printing companies in the world.

www.ultimaker.com

WESTPORT PRECISION LLC     Booth # 445
Service Categories: Fabricating - Sheet Metal • Electronic Enclosures • Laser Cutting • Machining • Prototypes - Rapid Sheet Metal

Full service punch & laser sheet metal fabricator & machine shop. One of the first in New England with Fiber Laser. In-house processing from design through finishing. State-of-the-art bending including automatic tool changing. MIG & TIG welding. Customer service and quality that exceeds customer expectations each & every time. 1 piece to 1,000s.

www.westportprecision.com

WIGGINS PLASTICS     Booth # 143
Service Categories: Plastics - Injection Molding • Plastics - Compression/Transfer Molding • Plastics - Thermoset Molding • Plastics - Insert Injection Molding • Plastics - Extruded Profiles

32 presses - Single source for all your molding requirements: thermoset injection, compression & transfer molding, thermoplastic injection molding; BMC & SMC molding, prototypes, engineering assistance, hot stamping, pad printing, sonic welding; sub assemblies, short & long runs.

www.wigginsplastics.com

Quality Certifications: ISO 9001:2015
WILLIAMS TOOL INC.     Booth # 235
Service Categories: Machining - CNC Milling & Turning • Machining - Precision CNC • Machining - Stainless Steel • Machining - Production • Machining - Multi Axis

CNC machined parts for industries requiring component parts that are high precision & close tolerances. We presently manufacture component parts for Medical Valves, Analysis Instrumentation & Pressure Sensing industries. While specializing in the machining of 300 Series Stainless Steel, we also machine materials including Aluminum, Brass & Titanium.

www.wmstool.com

Quality Certifications: ISO 9001:2008
WM BERG     Booth # 521
Service Categories: Gears • Gears - Worm • Sprockets & Chains • Assemblies • Timing Pulleys & Belts

For 50 years, customers have been relying on Berg's engineering services and staff of specialists to provide technical assistance with their precision components design and product application requirements. We continuously strive to provide customers with solutions that fit their needs, on-time. Berg is a division of Rexnord Industries LLC.

www.wmberg.com

Quality Certifications: ISO 9001:2008 CERTIFIED • RoHS • ITAR
A & M TOOL & DESIGN CO.     Booth # 534
Service Categories: Machining • Special Machinery - Design, Build & Rebuild • Optical Polishing • Welding & Weldments • Machinery Sales & Services - New & Used

Founded in 1948, A&M Tool & Design Co. continues to be operated by family members. Our fabrication services include small precision parts to complete custom machines. Additional services offered: Designing and building custom machines, engineering, assembly and welding. We hold to tolerances of.0001 or better.Industries: Aerospace/Optical/Medical/Robotics/Personal Goods.

Quality Certifications: ISO 9001: 2008 CERTIFIED • AS9100-D • ISO 13485:2003
A. T. WALL CO.     Booth # 213
Service Categories: Tubing - Cold Drawn • Laser Cutting • Metal Injection Molding • Tube Bending & Fabricating • Fabricating - Aluminum

Providing machining, MIM & tubing to the medical, automotive, frequency control, telecommunication, and defense markets. Offering a broad range of materials such as copper, aluminum, nickel, kovar, invar, BeCu, brass, bronze, niobium & tantalum up to 6" in diameter.



Quality Certifications: ISO 9001:2008
ACCUTRON INC.     Booth # 405
Service Categories: Assemblies - Printed Circuit Boards • Prototypes - Electronic • Testing - Printed Circuit Boards • Assemblies - Electromechanical • Electronic Encapsulations

One of the largest contract manufacturers in the state of CT. Our 55,000 sq. ft. state-of-the-art operations are centrally located in Windsor, CT. Services include SMT, Thru-Hole, ICT and Flying Probe Testing and Box Build assembly. 24 Hour quick-turn prototypes to volume production. NMSDC member.

Quality Certifications: AS 9100 • ISO 13485 • ISO 9001:2008
ACI TECHNOLOGY INC.     Booth # 514
Service Categories: Machining - Conventional CNC • Machining • Machining - Production • Machining - Stainless Steel • Electronic Hardware

Specializing in Industrial Flat Fanless Panel PC, Small Fanless Box PC, fanless power supply, and OEM custom configured Industrial Rack-Mount Computer Systems in multiple industries. Serving industry since 1990.

ACME MONACO     Booth # 109
Service Categories: Stampings - Metal • Stampings - Fourslide • Springs - Coil • Wire Forming & Fabricating • Snap Rings & Retaining Rings

Custom manufacturer of compression, extension, & torsion springs, progressive die & fourslide stampings, retaining rings, wire forms, as well as medical assemblies. Manufacturing facilities in New Britain, Connecticut & Presque Isle, Maine.



Quality Certifications: ISO 9001:2008 • EN ISO 13485:2012 • FDA REGISTERED • CE MARK
ACME WIRE PRODUCTS CO. INC.     Booth # 254
Service Categories: Wire Forming & Fabricating • Welding & Weldments • Baskets • Fabricating - Stainless Steel • Assemblies - Mechanical

Precision custom fabrication of wire & sheet metal components using steel and stainless steel. Wire forming capabilities .050" to .500" diameter. Design, tool making, CNC forming, bending, machining, presswork, threading, stamping, resistance welding, robotic welding, assembly & specialty packaging. Powder coating & fluid bed finishing. Design assistance for new projects.



Quality Certifications: ISO 9001:2015
ADVANCED PROTOTYPE MOLDING     Booth # 417
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Castings - Investment • Machining • Rapid Prototyping

We are proficient in several molding techniques including: Injection Molding, Rapid Prototyping/3D Printing, Cast Urethanes/RTV Molding, Rotational Molding, CNC Machined Parts, Lost Wax Investment Casting, Die Casting, Stamping and Rubber/Silicone Parts. Design consultation is complimentary to guarantee your prototype will proceed to production without a hitch!

Quality Certifications: UL REGISTERED E490896
ADVANTAGE PLASTIC PRODUCTS INC.(APP)     Booth # 247
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Engineering & Technical Services • Plastics - Insert Injection Molding • Tooling - Plastic Injection Molding

Custom injection molds and molding. Mold and product design assistance utilizing the latest in 3D CAD technology. State-of-the-art manufacturing facility. Secondary operations including decorating, sonic welding, heat staking, machining and light assembly. Highly competitive and reliable. EMI/RFI.

Quality Certifications: ISO 9001:2015
AERO METALS INC.     Booth # 355
Service Categories: Castings - Investment • Castings - Ferrous • Castings - Non-Ferrous • Castings - Stainless Steel • Castings - Steel

High integrity investment casting, net & near net shapes, thin wall, ferrous & non-ferrous components at the lowest total cost. Creative engineering analysis, secondary machining, Just-in-time delivery. Complete in-house tool & die shop, CAD/CAM tooling, and exacting control in achieving dimensional tolerances as specified. 16 Machining centers, drilling, tapping, impact forming, heat treating, sub-assembly of components. Quality craftsmanship & superior customer service.



Quality Certifications: ISO 9001:2015 • NADCAP • SPC
AERODYNAMICS INC.     Booth # 523
Service Categories: Metal Finishing - Anodizing • Metal Finishing - Chromate • Metal Finishing - Passivating • Metal Finishing - Electroless Nickel • Metal Finishing - Chrome Plating

Providing quality products and services since 1989, AeroDynamics is a state-of-the-art, 50,000 square foot, full-service electroplating and metal finishing company with NADCAP approval. We specialize mainly in the Aerospace, Military, and Defense industries but also service a large customer base in the Commercial, Industrial, and Medical fields as well.

Quality Certifications: NADCAP: CHEMICAL PROCESSING • ITAR
ALL FLEX FLEXIBLE CIRCUITS & HEATERS     Booth # 435
Service Categories: Circuits - Flexible • Heaters - Custom • Prototypes - Electronic • Assemblies - Circuits • Surface Mount Technology - Assembly

Prototype to high volume flexible circuit and heater manufacturer. Multi-layer, Maxi-flex®, single and double-sided with fine line capability and assembly. Now manufacturing HighTemp™ flex and heaters and offering an online heater configurator. For 25 years we have provided interconnect solutions to the medical, aerospace, military, industrial, and instrumentation markets.

Quality Certifications: AS 9100 / ISO 9001 • ITAR • IPC
ALLEGIS CORPORATION     Booth # 454
Service Categories: Fasteners • Hinges • Industrial Design Services • Adhesives • Assembly Hardware

One of North America’s leading providers of access hardware solutions for OEM manufacturers. We provide innovative products, including stock and custom options, and supply chain solutions through our ten distribution facilities.

Quality Certifications: ISO 9001:2008 • ISO 9001:2015
ALPHA ADDITIVE MANUFACTURING TECH.     Booth # 443
Service Categories: 3D Printing

We offer a range of 3D printing solutions from Markforged including direct to metal and composite carbon fiber 3D printers. Alpha offers complete solutions including sales, installation, training and ongoing service/support. For more information or questions please email info@alphaamt.com.

AMALCO (AMERICAN ALUMINUM CO.)     Booth # 218
Service Categories: Stampings - Deep Drawn Shells • Hydroforming • Assemblies - Mechanical • Brazing - Aluminum Dip

Deep drawn & Hydroformed Enclosures; plus Aluminum Dip Brazing. SECONDARY OPERATIONS: CNC Machining, Anodizing, Iriditing, Painting (Powder Coat & Wet), Piercing/Forming, Welding, Light Assembly and Heat Treating. MATERIALS: Aluminum, Stainless, Brass, Copper, Hastelloy, Nickel, Steel & Specialty Metals. MARKETS SERVED - All.



Quality Certifications: MIL-I-45208A • ITAR REGISTERED
AMERICAN FLEXIBLE PRODUCTS INC.     Booth # 306
Service Categories: Gaskets, Seals, Washers & O-rings • Die-Cutting - Felt, Cork & Rubber • Fabricating - Foil, Films & Foams • Die-Cutting • Waterjet Cutting - Non-Metal

Employee Owned, Custom Fabricator of Flexible materials: foam, rubber, sponge, thin gauge plastics, EMI/RFI, and pressure sensitive adhesives. Services: rotary die cutting/flatbed die cutting, kiss cutting, DIGITAL CUTTING, laser cutting, water jet cutting, slit to width, laminating films, fabric & PSA. Rogers Corporation Preferred Converter. 3M Select Converter.



Quality Certifications: ISO 9001:2015 • SPC
AMI     Booth # 354
Service Categories: Assemblies - Electronic • Assemblies - Printed Circuit Boards • Prototypes - Electronic • Surface Mount Technology - Assembly • Assemblies - Electromechanical

We provide electronic manufacturing services for low/medium volume customers. Capabilities include PCB assembly, box-build assembly, prototyping, cable & harnesses, testing, coating & encapsulation. Our Prototyping Center is located in Somerville, MA and our production facility in Winthrop, ME. AMI is 100% employee-owned.

Quality Certifications: ISO 13485 • ISO 9001:2008 / AS 9100 • IPC A-610D CLASS 2&3 • UL APPROVED
ANCO ENGINEERING INC.     Booth # 246
Service Categories: Fabricating - Heavy Steel & Plate • Welding & Weldments • Machining - Large Parts • Fabricating - Sheet Metal • Powder Coating

Family owned and operated precision metal fabricator specializing in small, medium & large enclosures, weldments, frames, sheet metal, machined, & painted/powder coated parts up to 10 tons. Engineering & design assistance available. Dock to stock, JIT, value-added, turnkey, CAD/CAM, modeling, cost reduction assistance, and in-house assembly. Anco Truck Fleet delivery.

Quality Certifications: MIL-I-45208
ANSEN CORPORATION     Booth # 341
Service Categories: Assemblies - Electronic • Assemblies - Printed Circuit Boards • Assemblies - Electromechanical • Prototypes - Electronic • Assemblies - Electrical

Full service Electronics Contract Mfr. Electronics & electro-mechanical assemblies to customer specs, top quality workmanship at the lowest cost. Prototypes, small & medium production of surface mount technology, through hole & mixed technology. Highly skilled staff to assist in product development & product mfg. Deeply committed to customer service.

Quality Certifications: IPC-A-610F • IPC/WHMA-A-620 • ISO 13485 • J-STD-001
APAHOUSER INC.     Booth # 522
Service Categories: Fabricating - Sheet Metal • Fabricating - Steel • Fabricating - Aluminum

Supplier of precision sheetmetal fabrication. We provide the most cost effective prices, parts delivered on time with high quality - prototypes to high-volume. ISO 9000:2008 Certified, Mil-I-45208A & Control Plans compliant.

APEXX OMNI-GRAPHICS     Booth # 249
Service Categories: Nameplates, Dials & Panels • Labels, Tapes & Decals

Manufacturer of custom labels, nameplates, decals, panels, dials, tags, spacers and insulators. Long and short runs. Immediate delivery. Providing dependable, prompt, courteous service since 1963.



APPLIED PLASTICS CO. INC.     Booth # 255
Service Categories: Powder Coating • Coatings - Teflon • Coatings

Powder coating, decorative and functional: epoxy, polyester, TGIC, nylon, halar, kynar, PFA-Teflon, and others. Dupont licensed applicator of Teflon, PTFE, FEP, "S", and Silverstone.

ARC-TRONICS INC.     Booth # 415
Service Categories: Assemblies - Electronic • Assemblies - Electromechanical • Assemblies - Printed Circuit Boards • Assemblies - Turnkey • Prototypes - Electronic

We are a full-service Electronic Manufacturing Services (EMS) provider for turnkey products in printed circuit board assembly, cable/harness assembly, and complete box build or higher level integration. The company is ISO 9001:2008, ISO 13485:2003, and AS9100 Rev. C certified. Arc-Tronics is also an ITAR registered company.



Quality Certifications: ISO 9001:2008 • AS 9100 REV C • ITAR • ISO 13485:2003
ARMSTRONG RAPID MANUFACTURING     Booth # 129
Service Categories: Castings - Plaster Mold • Castings - Graphite Mold • Machining - Castings • Plastics - Reaction Injection Molding • Prototypes - Rapid Casting

An industry leader in providing prototype/short run machined aluminum castings, & Reaction Injection Molded parts for over 50 years. Full in-house capability including: DFM support, Tooling, Foundry (Plaster, Precision Airset Sand, One Shot Tool-less, Graphite Die), RIM Molding, CNC Machining, Paint & Finishes.



Quality Certifications: ISO 9001:2008 • AS 9100 REV C • ITAR
ASCO SINTERING CO.     Booth # 311
Service Categories: Powder Metal Parts • Gears • Valves & Controls • Assemblies • Copper - Materials

A contract manufacturer of Powder Metallurgy components offering highly engineered solutions since 1964. We offer New product development and/or cost reduction of existing parts. Near full density + all MPIF materials. High temperature sintering and in-house tool design. Complete to print; serving all markets including automotive. Kanban/JIT ISO-9001:2015 Certified.



Quality Certifications: ANSI/ISO/ASQ 9001:2015 • ISO 9001:2015
ASSOCIATED SPRING / BARNES EC     Booth # 342
Service Categories: Springs - Coil • Springs - Flat • Springs - Wave • Stampings - Fourslide • Wire Forming & Fabricating

Since our inception we have been a pioneer, leader and innovator in engineered springs, stampings, retaining rings and struts; as well as micro-fine-blanked & precision metal components. With 20+ strategic global locations we serve our customers with superior solutions that provide them with a competitive edge in their respective markets.



Quality Certifications: AS 9100:2009 REV C • ISO/TS 16949:2009 • ISO 14001:2004 • ISO 9001:2008, ISO 13485:2003
BARE BOARD GROUP     Booth # 123
Service Categories: Fabricating - Printed Circuit Boards • Printed Circuit Boards - Aluminum Clad • Circuits - Flexible • Prototypes - Fabrication • Prototypes - Electronic

Prototype through production, BBG is dedicated to providing quality PCB's built domestically & offshore. Rigid, Rigid Flex, Flex & Metal Clad PCB's. ITAR Registered (Domestic & Offshore), Military and Aerospace production. Specializing in RF; Medical; LED Lighting, Automotive and ITAR applications. BBG is also WEE, UL and RoHS Compliant and a Minority Business Enterprise.



Quality Certifications: ITAR • ISO 9001:2008 • TS 16949 • ISO 14001
BEST GLOBAL SOURCE     Booth # 530
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Electromechanical • Prototypes - Electronic • Coatings - Conformal

An ISO9001/AS9100 certified contract manufacturer that specializes in Printed Circuit Board Assemblies and Electro-Mechanical Box-Builds. Best Global Source provides cost effective manufacturing conforming to customer and IPC (Class 2 and 3) requirements. BGS can assist through concept, turnkey prototyping and volume production.

Quality Certifications: AS 9100 ISO 9000 • AS 9100D, ISO 9001:2015
BOKER'S INC.     Booth # 536
Service Categories: Washers • Stampings - Shims • Stampings - Metal • Stampings - Short Run • Stampings - Progressive Die

An owner-operated custom manufacturer of stampings and non-standard washers, spacers and shims since 1919. With over 2,000 available materials our customers have endless possibilities with fast delivery. BBB Accredited Business.



Quality Certifications: AS 9100 • ISO 9001 • WBENC
BREWSTER WASHERS     Booth # 544
Service Categories: Stampings - Shims • Gaskets, Seals, Washers & O-rings • EDM - Wire • Prototypes - Stamping • Stampings - Micro-Miniature

We are a 4th generation custom precision parts manufacturer of washers, shims, discs and other odd shaped flat parts. Our company has been in business since 1919. All parts are manufactured in the United States with only American smelted metals and we are ISO 9001:2008 certified.



Quality Certifications: ISO 9001:2008 DESIGN EXCLUDED • DOD REGISTERED • CAGE CODE: 08555
BUSE INDUSTRIES INC.     Booth # 324
Service Categories: Wire & Cable Harnesses • Assemblies - Electromechanical • Assemblies - Turnkey

A leading manufacturer of custom cable assemblies, wire harnesses, and electromechanical assemblies. Features: UL/CSA, ITAR, IPC610-620, QIK Shop, Program Management, Material Logistics Solutions, and Engineering Services. Markets: Military, Medical, Power Management, Security, Controls/Monitors, Testing/Simulation, and Telcom.

Quality Certifications: ISO 9001:2008 • IPC 610 / 620 • CSA & UL APPROVED • ITAR
C & K PLASTICS/VALLEY EXTRUSIONS     Booth # 241
Service Categories: Plastics - Thermoforming/Vacuum Forming • Plastics - Pressure Forming • Extrusions - Plastic • Plastics - Extruded Profiles • Plastics - Thermoplastic Extrusion

C&K Plastics and Valley Extrusions are sister plastic companies. Since 1963 C&K has specialized in cut sheet vacuum, pressure and twin sheet forming, also providing CNC machining and contract manufacturing. Since 2001 Valley has specialized in custom plastic extrusions with co-extrusions & tri-extrusions, large parts, complex hollows & tubing capabilities produced in most thermoplastics. Our three facilities have a combined 450,000 sq.ft. giving us the capacity to meet even the largest requirements. Valley Extrusions - PA, C&K - NJ, and C&K Georgia - GA.



Quality Certifications: ISO 9001:2008
CAD BLU     Booth # 427
Service Categories: 3D Printing • Rapid Prototyping • CAD/CAM Software • Materials - Plastic • Prototypes - Plastic

For over 20 years, CAD BLU has been transforming businesses through manufacturing innovation. We provide an extensive selection of 3D printer systems, materials, technologies, and vendors - offering you the right solution for virtually any printing need you may have. We don't just sell machines. We provide solutions.

CAI LLC / FORM MANUFACTURING     Booth # 232
Service Categories: Wire & Cable Harnesses • Plastics - Injection Molding • Panels - Control • Assemblies - Electronic • Assemblies - Printed Circuit Boards

Manufacturer of WIRE HARNESS, CABLING, INJECTION MOLDING and ELECTROMECHANICAL ASSEMBLY. Prototype to production volume of ASSEMBLY HARNESSES, INJECTION MOLDING, HOT STAMP AND DECORATIVE PLASTICS; BOX BUILDS, miniature harness assemblies, coil cord, custom over molding. Ohio & Pennsylvania locations. For quote or inquiry, email info@sig4cai.com

Quality Certifications: ITAR • IPC 610 / 620 • UL RECOGNIZED
CAMM METALS INC.     Booth # 554
Service Categories: Fabricating - Sheet Metal • Laser Cutting • Waterjet Cutting - Metal • Welding & Weldments • Machining - CNC Milling & Turning

We are a full-service metal Fabrication and Machining company focused on Sheet, Plate and Tube fabrication, CNC Machining and Welding of everything from small parts and components to assemblies and commercial products for OEM and Commercial customers. We have in-house 2D & 3D CAD, Laser, Waterjet, Forming, Sawcutting, Machining, PEM Installation and Welding.

CARLTON INDUSTRIES CORP. (CIC)     Booth # 208
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Electromechanical • Assemblies - Electronic • Cable & Wire Manufacturing • Surface Mount Technology - Assembly

We are a New England based EMS provider for electronic Printed Circuit Board assemblies, electro-mechanical box builds and custom cable assemblies since 1994. CIC’s capabilities include high mix, prototype-high volume production runs, SMT and TH assembly, dock-to-stock, inventory management programs, in-house testing, and robotic conformal coating.

Quality Certifications: ISO 9001 • ISO 13485 • AS 9100 • ITAR REGISTERED
CENTURY SPRING CORP.     Booth # 214
Service Categories: Springs - Coil • Stampings - Fourslide • Wire Forming & Fabricating • Springs - Flat • Springs - Wave

A MW Industries location, is the go-to source for Made in USA stock and custom springs, for any OEM or MRO application. Same day shipments from over 35,000 stock designs - compression, extension, torsion, tapered, disc, urethane and die springs. Century also specializes in custom springs. Inquire at info@centuryspring.com. FREE CATALOG upon request.



Quality Certifications: ISO 9001:2008
CIREXX INTERNATIONAL INC.     Booth # 551
Service Categories: Printed Circuit Boards - Aluminum Clad • Rapid Prototyping • Assemblies - Circuits

A premier manufacturer of Rigid Flex, Flex, Rigid HDI PCB's, RF microwave boards utilizing all microwave materials. Cirexx also has in-house prototype assembly. Cirexx is MIL certified, AS9100D certified, IPC 600 Certified, J-Std-001 Certified, and IPC-610 Certified.

Quality Certifications: ANSI/ISO/ASQ 9001:2015 • AS 9100 REV D • J-STD-001 • IPC-A-610 / J-STD-001
CLASSIC COIL CO.     Booth # 441
Service Categories: Electronic Components • Assemblies - Electromechanical • Motion Control • Prototypes - Electronic

Contract manufacturer of electro-magnetic coils and assemblies. We specialize in the Aerospace, Industrial, Medical and Consumer Electronics industries. We have dedicated engineering services: prototyping, professional quoting, sample to production expertise.

Quality Certifications: ISO 9001:2015
COATING SYSTEMS INC.     Booth # 540
Service Categories: Metal Finishing - Plating • Metal Finishing - Anodizing • Metal Finishing - Hard Coating • Metal Finishing - Electroless Nickel • Metal Finishing - Painting

Leading metal finisher in clear & dyed sulfuric anodize, hardcoat, chromate conversion coatings, electroless nickel, chrome, copper, nickel, tin, zinc, zinc-nickel, gold & silver plating, passivation, paint, powder coat, dry film lubricants, silkscreen, laser mark/engrave, and pad printing. Email us at sales@coatingsystemsgroup.com.

Quality Certifications: NADCAP
COMCO PLASTICS INC.     Booth # 537
Service Categories: Plastics - CNC Machining • Plastics - Screw Machining • Fabricating - Plastic • Plastics - Thermoforming/Vacuum Forming • Assemblies

American Born. Global Leaders. World Class Service. We specialize in High Quality, Precision Machined & Fabricated High Performance Plastic Parts servicing a Multitude of Global Industries. Comco Plastics is an ISO 9001 & ISO 13485 Certified plastics parts manufacturer located in New York established in 1956.

Quality Certifications: ISO 9001 • ISO 13485
COMSTOCK INDUSTRIES INC.     Booth # 431
Service Categories: Machining - Precision CNC • Machining - Production • Machining - CNC Milling & Turning • Prototypes - Machining • Welding - Robotic

Precision Machining, Prototype, Production, Engineering. 32K sq.ft. facility. Small to mid-volume production manufacturing for small & large parts (up to 120" X-axis). Rapid prototype design and engineering services. 43 CNC mills and lathes, robotic welders. Finishings offered: powder-coat, paint. 100% inspection with 4 CMM. Clean room assembly and cast urethane part.

Quality Certifications: ISO 9001:2015
CONNECTICUT COINING INC.     Booth # 352
Service Categories: Stampings - Deep Drawn Shells • Stampings - Short Run • Stampings - Metal • Stampings - Ferrous & Non Ferrous • EDM

Deep drawing specialist in a wide range of metals based on customers' supplied drawings. All required tooling is built and tested on site. We supply small to medium production runs to the high voltage power & X-ray tube manufacturers; as well as components for aerospace and other industries.



Quality Certifications: AS 9100D • ISO 9001:2015 • ITAR REGISTERED
COX MFG. CO.     Booth # 420
Service Categories: Screw Machining - Swiss/CNC Swiss • Machining - Precision CNC • Machining - Multi Axis • Screw Machining - Multi Spindle • Machining - CNC Milling & Turning

Custom screw machine products in volume for the auto/trucking, medical, firearms, geophysical, aero/defense industries and more. We expertly operate CNC, Swiss, multi-axis, and multi-spindle machines to name a few. Parts range from miniature to 2.75" diameter, with a wide diversity of materials, delivered reliably.

Quality Certifications: ISO 9001:2015 • ITAR REGISTERED
CT LASER & ENGRAVING     Booth # 316
Service Categories: Laser Engraving • Laser Marking • Pad Printing • Screen Printing • Engraving

For more than 30 years, Connecticut Laser & Engraving has been a leader in precision pad printing, silk screening, laser marking and engraving, & mechanical engraving. Our clients span countless industries throughout the United States. For part marking, let CT Laser & Engraving stay on time and on budget for you!

Quality Certifications: FFL
DA/PRO RUBBER INC.     Booth # 121
Service Categories: Rubber Molding • Plastics - Injection Molding • Silicone / Rubber - Liquid Injection Molding • Rubber To Metal Bonding • Rubber - Compression Molding

5 facilities for compression/injection molding - high-quality custom rubber, TPE, & plastic components molded to precision tolerances such as diaphragms, seals, connectors, molded shapes, rubber to metal parts for medical device, electronic & aerospace industries. Class 10,000 cleanroom - chemists & engineers assist in optimal moldability. sales@daprorubber.com



Quality Certifications: ISO 9001
DAVID PACKARD CO.     Booth # 428
Service Categories: Machining - Swiss Laser & CNC Swiss • Machining - CNC Milling & Turning • Machining - Precision CNC • Machining

A Precision Swiss/Larger diameter turning CNC Machine Shop, tailored to many industries such as firearms, fiber-optics, medical, defense, photonics, telecommunications, and automotive to name a few. Prototype or production runs in any quantity from 5 to 5,000,000 pieces can be accommodated.

Quality Certifications: ISO 9001:2008 • ITAR
DESIGN-2-PART MEDIA     Booth # 000
Service Categories: Publications

Published since 1984, Design-2-Part Magazine is one of the country's oldest publications specifically devoted to showcasing manufacturing companies who specialize in helping OEM's take their product from design to part.

DISTRON CORPORATION     Booth # 412
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Electromechanical • Lighting - Electroluminescent • Assemblies - Turnkey • Electronic Encapsulations

New England Electronic Contract Manufacturing - SMT, PCB and Flex Circuit Assembly/Electromechanical Assembly. Industries served include: Military, Medical, Industrial, LED Lighting, Clean Technology and Robotics. Additional services include ICT, Functional Testing, Flying Probe Test. We also offer order fulfillment and warranty repair.

Quality Certifications: ISO 9001:2008 • ISO 13485:2003 • CSA LISTED / UL RECOGNIZED • IPC-610A
EAGLE METALCRAFT INC.     Booth # 315
Service Categories: Fabricating - Sheet Metal • Machining - Precision CNC • Metal Finishing - Painting • Laser Cutting

We are a full service, precision sheet metal fabricator with laser cutting, CNC machining, in-house painting & powder coating. We serve the electronics, fiber optic & medical industries. ISO 9002 compliant.

ECHO INDUSTRIES INC.     Booth # 505
Service Categories: Stampings - Deep Drawn Shells • Stampings - Short Run • Stampings - Metal

Specializing in deep drawn metal boxes, pans, cups & shells. We provide metal forming solutions to your manufacturing challenges. Over 100 years in Orange, MA!

ECK PLASTIC ARTS     Booth # 535
Service Categories: Plastics - Injection Molding • Plastics - Thermoforming/Vacuum Forming • 3D Printing • Plastics - CNC Machining • Rapid Prototyping

We are a supplier of plastic engineered components to OEM customer specifications. Processes in house include - Fabrication, Machinings, 3D Printing,Protoypes, Injection Molding, Assembly and Vacuum Forming.

ELECTRONIC FASTENERS INC.     Booth # 421
Service Categories: Fasteners • Electronic Hardware • Gaskets, Seals, Washers & O-rings • Threaded Rod • Snap Rings & Retaining Rings

We provide a broad range of fasteners and related services for industrial, commercial and mil-spec fastener markets. We are VMI specialists and known for exceptional service, quality and expertise. Call us for your next requirement.

Quality Certifications: ISO 9001:2008
ELECTRO-SPACE FABRICATORS     Booth # 336
Service Categories: Fabricating - Sheet Metal • Assemblies - Turnkey • Electronic Enclosures • Machining - Precision CNC • Plastics - Injection Molding

Custom sheet metal fabrication & machining. Chassis, card cages, front panels, cabinets & enclosures. Plating (RoHS), painting, silk-screening & value added assembly in-house. Prototypes to production with short lead times & competitive pricing.

Quality Certifications: ISO 9002 • MIL-STD-105 • MIL-I-45208
EMKA INC.     Booth # 337
Service Categories: Assembly Hardware • Electronic Hardware • Hinges • Shielding - EMI/RFI • Gaskets, Seals, Washers & O-rings

A leading manufacturer of enclosure hardware. Products include handles, hinges, locks, latches, gasketing and accessories.

Quality Certifications: ISO 9001 • ISO 14001 • RoHS • UL APPROVED
EPILOG LASER     Booth # 127
Service Categories: Lasers • Laser Cutting • Laser Engraving • Laser Marking • Bar Coding

An industry leader in design of laser engraving, cutting & marking systems, manufacturers of the Epilog Zing, Mini, Helix, Fusion M2, FiberMark, and G2 Galvo series of laser systems.



Quality Certifications: ANSI STANDARDS • IEC • CE • CFR 21
EVANS     Booth # 244
Service Categories: Stampings - Deep Drawn Shells • Eyelets & Drawn Shells • Stampings - Metal

Conventional multi-station transfer presses. Custom designed progressive type presses. Thin-walled drawn metal shells, tubular parts and precision metal stampings.



Quality Certifications: ISO 9001:2015
FAIRCHILD AUTO-MATED PARTS INC.     Booth # 330
Service Categories: Machining - CNC Milling & Turning • Screw Machining - Swiss/CNC Swiss • Screw Machining - Multi Spindle • Rapid Prototyping • Assemblies

Serving OEM companies for over 74 years, supplying them with carefully-engineered, precision machined parts and assemblies that are delivered on-time at very attractive prices. Our employees really excel at making your parts right the first time and they can offer valuable advice for further cost reductions!

Quality Certifications: ISO 9001:2015
FISHER UNITECH     Booth # 416
Service Categories: CAD/CAM Software • Rapid Prototyping • Finite Element Analysis - FEA • Reverse Engineering • CAD/CAM Training

Provides Product Lifecycle Management solutions to manufacturing companies. We are a leading reseller of SolidWorks CAD software, SolidWorks Enterprise PDM, Dimension 3D Printers and Fortus 3D Production Systems.



FORECAST 3D     Booth # 308
Service Categories: 3D Printing • Rapid Prototyping • Prototypes - Rapid Casting • Castings - Rubber Mold • Tooling - Models & Prototypes

Industrial 3D Printing, Short-Run Manufacturing, & High Volume Production Services for Prototype & Production. Capabilities: HP's Multi Jet Fusion (MJF), Fused Deposition Modeling (FDM), Direct Metal Laser Sintering (DMLS), Stereolithography (SLA), PolyJet, CNC Machining, & RTV Urethane Casting. Customer Focused, Quality Driven since 1994.



Quality Certifications: ITAR REGISTERED • ISO 9001:2015 • AS 9100D
FOREST CITY CASTINGS     Booth # 424
Service Categories: Castings - Graphite Mold • Castings - Aluminum • Castings - Zinc • Castings - Die, Aluminum • Castings - Die, Zinc

The leader in Graphite Permanent Mold Technology, rapid production tooling, CNC machining, & economical, high precision mfg. of zinc & aluminum castings. We offer high quality castings in low and medium production volumes and a lifetime warranty on every production mold we make. Graphite molds are a fraction of the cost of die cast tools.

Quality Certifications: CONTROLLED GOODS • ISO 9001:2015 • ISO 14001:2004 • BSOHSAS: 18001:2007
FRANK ROTH CO. INC.     Booth # 414
Service Categories: Assemblies - Turnkey • Machining - Multi Axis • Screw Machining - Swiss/CNC Swiss • Machining - CNC Milling & Turning • Machining - Weldments

A product development & manufacturing firm specializing in turnkey manufacturing of electromechanical assemblies, multi-axis CNC milling and turning, aerospace sheetmetal components and complex fabrications requiring certified welding.

Quality Certifications: AS 9100D • ISO 9001:2000 • MIL-STD-248 • MIL-STD-278
GALLAGHER FLUID SEALS INC.     Booth # 334
Service Categories: Gaskets, Seals, Washers & O-rings • Rubber Molding • Prototypes - Rubber • Extrusions - Rubber

For over 60 years, we have consistently provided superior technical solutions specializing in O-rings, seals, custom PTFE and molded shapes with the lowest total cost of ownership. Creating competitive advantages for our customers in their products or markets is what makes Gallagher "The Seal Specialist". 2nd location: 21 Deer Park Dr., East Longmeadow, MA, Ph: 800-356-0061



Quality Certifications: ISO 9001:2008 • ISO 14001-2004
GEMCO MFG. CO. INC.     Booth # 401
Service Categories: Stampings - Metal • Stampings - Fourslide • Stampings - Progressive Die • Stampings - High Volume • Stampings - Ferrous & Non Ferrous

RESPONSIVE – EXPERIENCED – RELIABLE! For 75 years, Gemco has been a leader in the manufacture of custom precision metal stampings and wire forms servicing the automotive, aerospace, telecommunications, appliance, medical and lighting industries. Looking to partner with a “low maintenance” vendor? Give Gemco the opportunity to earn your business. WE’VE GOT YOUR BACK!



Quality Certifications: ISO 9001:2015
GOPROTO INC.     Booth # 456
Service Categories: 3D Printing • Machining • Tooling - Plastic Injection Molding • Tooling - Casting • Prototypes - Models

Delivering turnkey plastic and metal part manufacturing solutions including industrial design model making, rapid prototyping, additive manufacturing, cast urethane, CNC machining, rapid sheet metal, rapid injection tooling, production parts (injection molding, stamping, die-cast, sheet metal), and part finishing to complete your product.



Quality Certifications: ISO 9001
GPC ELECTRONICS     Booth # 139
Service Categories: Assemblies - Electronic • Assemblies - Turnkey • Wire & Cable Harnesses • Surface Mount Technology - Assembly • Assemblies - Printed Circuit Boards

Since our inception in 1985, we've had a track record of working with leading OEMs in North America, Europe, Asia & the Pacific. We are able to customize processes, delivering unique solutions to our customers, providing them with a competitive advantage & positive outcomes. We are a full service EMS and cable harness provider with three manufacturing sites globally.



Quality Certifications: ISO 9001 • ISO 14001 • ISO 13485 • ISO/TS 16949
GRACIOUS LIVING INNOVATIONS INC.     Booth # 429
Service Categories: Plastics - Extruded Profiles • Extrusions - Plastic

A North American custom profile extrusion company and a recognized international leader in thermoplastics profile design, engineering, processing and value-added manufacturing. We have over 40 years of experience helping our customers discover unique and innovative possibilities in plastic extrusion.

Quality Certifications: ISO 9001:2008
GRAPHICAST INC.     Booth # 239
Service Categories: Castings - Permanent Mold • Castings - Graphite Mold • Castings - Zinc • Castings - Non-Ferrous

Zinc alloy castings using unique graphite permanent mold process. Low cost graphite molds make this process ideal for low to medium quantities. Eliminate expensive CNC hog-outs, high tooling costs, and long lead-times. In-house design, mold building and precision CNC machining. Cosmetic and protective finishes available.



Quality Certifications: ISO 9001:2008
GREENE RUBBER CO. INC.     Booth # 231
Service Categories: Rubber Fabrication • Rubber Molding • Rubber - Transfer Molding • Silicone / Rubber - Liquid Injection Molding

Custom rubber gaskets & seals. Custom rubber molding, LSR, vibration isolation, rubber-to-metal bonding, Chomerics EMI & Thermal materials, Rogers Poron Urethane Foams, 3M Adhesives, Parker O-Rings, St. Gobain tubing and Panasonic PGS.

Quality Certifications: ISO 9001:2015 • AS9100D
GUPTA PERMOLD CORP.     Booth # 434
Service Categories: Castings - Aluminum • Extrusions - Aluminum • Machining - Aluminum • Machining - Castings • Castings - Permanent Mold

We are a full-service, turnkey, contract manufacturer of aluminum engineered components, specializing in casting, extrusions and machining.



Quality Certifications: ISO 9001:2008
HALLMARK NAMEPLATE INC.     Booth # 426
Service Categories: Labels, Tapes & Decals • Nameplates, Dials & Panels • Switches - Membrane • Assemblies - Electronic • Assemblies - Printed Circuit Boards

US manufacturer of nameplates, overlays, membrane switches and a provider of electronic manufacturing services. Hallmark is a small veteran owned company, ISO9001, ISO 13485 Certified and ITAR Registered. Hallmark is also UL and CSA Recognized on many substrates and adhesives.

Quality Certifications: ISO 9001:2008 • ISO 13485:2003 • ITAR • UL & CSA RECOGNIZED
HARMONY CASTINGS LLC     Booth # 236
Service Categories: Castings - Aluminum • Castings - Sand & Shell • Castings - Sand

We are a leader in the production of aluminum castings. We are an ITAR compliant and AS9100 Certified facility. Our V-process delivers tight tolerances, thin walls and excellent surface finish. Further we're able to bring your project from model to production in just three weeks.



Quality Certifications: ISO 9001:2008 • AS 9100 REV D
HI-TECH FASTENERS INC.     Booth # 349
Service Categories: Fasteners • Electronic Hardware • Threaded Parts • Grommets • Assembly Hardware

Authorized stocking distributor for 60 leading fastener & component lines. Products include PEM, Southco, circuit board hardware & accessories, threaded inserts for plastics, cable components, adhesives & tapes, commercial & military hardware, installation tools, grommets, grommet edging, gaskets, extrusions, seals trim, fiber management, cable sleeving and wraps.



Quality Certifications: ISO 9001:2000 • MIL-I-45208A
HOWELL PLASTICS     Booth # 211
Service Categories: Plastics - Thermoforming/Vacuum Forming • Packaging • Material Handling • Prototypes - Fabrication • Plastics - CNC Machining

Specializing in design, tooling & manufacturing of both thin & heavy gage products such as material handling trays, custom enclosures, OEM components, blisters, clamshells & medical device packaging. We use a wide variety of materials including GP-ABS, HDPE, PETG, HIPS & PVC. Thickness ranging from 0.010" - 0.500".

HYDRO     Booth # 107
Service Categories: Extrusions - Aluminum • Fabricating - Aluminum Extrusions • Aluminum - Materials • Heat Sinks • Machining - Aluminum

The world’s largest aluminum extrusion company, Hydro is the North American leader in common alloy extruded aluminum products. From raw aluminum to assembled products, we offer the industry’s broadest product capabilities in press sizes and tonnages (direct and indirect extrusion), alloy selection, circle sizes, and profile types.

HYDRO TUBE ENTERPRISES INC.     Booth # 222
Service Categories: Tube Bending & Fabricating • Laser Cutting • Cutting - Tube & Pipe • Welding & Weldments • Powder Coating

We are experts in tube bending & fabrication, providing innovative quality products & services. From robotic welding, to powder coat painting to LASER TUBE CUTTING to 12" diameter, our customers use our many services to get assemblies done well & done right. Ask us about our 5 axis laser. For a quote call Tim @ 919-258-3070.



Quality Certifications: ASTM - SAE • METRIC - JIS • CE AWS • ISO 9001-2000
INCERTEC     Booth # 548
Service Categories: Metal Finishing - Anodizing • Metal Finishing - Electroplating • Metal Finishing - Precious Metal Plating • Metal Finishing - Passivating • Metal Finishing - Selective Plating

We are among the largest NADCAP Accredited plating and metal finishing companies in America. Incertec has approvals from many of the world’s biggest names in the fields of aerospace, medical devices and electronics. Certifications: ISO 9001, AS9100, ITAR, RoHS Compliant, Federal Firearms License.

Quality Certifications: NADCAP ACCREDITED • AS9100 REV C • ISO 9001:2000 • ITAR / NADCAP
INDUSTRIAL MODERN PATTERN & MOLD     Booth # 515
Service Categories: Rapid Prototyping • Plastics - Injection Molding • Molds & Moldmaking - Plastic • Prototypes - Plastic • Urethanes - Molded/Extruded

IMPM is a service bureau specializing in prototyping, product development, and low volume production. Our competencies include 3D printing (SLA), silicone tooling and cast urethane parts (Home of the 100-shot guarantee), aluminum/p20 injection tooling and injection molding. Let IMPM set the standard.

INSACO INC.     Booth # 240
Service Categories: Grinding - Ceramics • Machining - Ceramics • Grinding - Glass • Ceramic Parts • Optical Polishing

Precision fabricator of ultra hard materials, utilizing advanced ceramic materials including sapphire, ceramics from all producers, glass, quartz, & many others. Machining to very precise dimension & tolerances in a variety of shapes & configurations as required. No standard parts/all mfg. to specific customer requirements. Prototype to production. No metals or plastics.



INSULFAB PLASTICS INC.     Booth # 204
Service Categories: Plastics - CNC Machining • Plastics - Sheet, Rod & Tube • Stampings - Progressive Die • Plastics - Screw Machining • EDM - Wire

Specializing in precision CNC machining, turning & die cutting of thermoplastics, thermosets, composites, films & fibre. Prototypes, Turnkey Assembly. Design & fabrication of specialty assembly and process tooling for the PCB industry including wire EDM.

Quality Certifications: ISO 9001:2008 • ITAR
INTERNATIONAL CERAMIC ENGINEERING     Booth # 256
Service Categories: Ceramic Parts • Machining - Ceramics • Grinding - Ceramics • Ceramics - Metallizing & Plating • Prototypes - Machining

A leading manufacturer & fabricator of technical ceramic materials & machinable thermo-plastics. We offer engineering assistance during the prototype process through to production. We specialize in unique geometries made from high quality advanced materials. Competitive pricing with quick deliveries. Materials include Alumina Oxide, Boron Nitride, Macor™, Zirconia, PEEK, Ultem & More!



INTERPRO ADDITIVE MANUFACTURING GROUP     Booth # 525
Service Categories: 3D Printing • Rapid Prototyping - Equipment • Rapid Prototyping • Castings - Rubber Mold • Urethanes - Molded/Extruded

We provide 3D printing services and systems that help companies reduce prototyping/manufacturing costs and deliver new products much faster. Our services: 3D Printing (HP Multi Jet Fusion, SLA, Markforged, FDM), Cast urethane & silicone parts – Custom fabrication & finishing, InterPRO is partner reseller of HP and Markforged industrial 3D printers.



Quality Certifications: ITAR
ISELI - A DIVISION OF APEX TOOL GROUP LLC     Booth # 230
Service Categories: Screw Machining - Swiss/CNC Swiss • Screw Machining - Escomatics • Machining - Miniature Precision

Precision machined components to 1.125" diameter. Complete secondary including: thread rolling, knurling, milling, tapping, drilling and slotting. For a Quote, email David at david.atwood@apextoolgroup.com.



Quality Certifications: ISO 9001:2015
JANCO ELECTRONICS INC.     Booth # 543
Service Categories: Assemblies - Electronic • Assemblies - Printed Circuit Boards • Surface Mount Technology - Assembly • Assemblies - Turnkey • Assemblies - Electromechanical

Contract manufacturer of electronic assemblies & box-build requirements. DFM, DFT, PCB & electro-mechanical design services; surface-mount & thru-hole manufacturing with in-circuit, flying probe, functional & ESS testing. UL & CSA Compliant, J-STD-001 Certified Solderers, IPC 610 workmanship standards & RoHS/WEEE mfg. capabilities.

Quality Certifications: ISO 9001:2008 • ISO 13485:2003
JONES & VINING INC.     Booth # 541
Service Categories: Polyurethane - Parts • Plastics - Injection Molding • Plastics - Thermoset Molding • Plastics - Reaction Injection Molding • Plastics - Flexible Foam

Contract molder of quality polyurethane products including outsoles & insoles for the footwear industry & polyurethane products for a wide variety of industrial & consumer items. Servicing the recreation, medical, furniture & consumer goods markets. High & low volume molding capabilities in a wide variety of polyurethane materials.

K & S PRECISION METALS     Booth # 321
Service Categories: Tubing - Cold Drawn • Cutting - Tube & Pipe • Drilling & Tapping

Providing high quality brass, aluminum & copper tubing, rod, strips & sheets. Secondary operations include cut to length, draw to size, milling, tapping & threading. Low minimums & quick delivery.



KALOW TECHNOLOGIES     Booth # 506
Service Categories: Assemblies - Electromechanical • Assemblies - Mechanical • Assemblies - Turnkey • Fabricating - Sheet Metal • Special Machinery - Design, Build & Rebuild

As a diverse & highly capable contract manufacturer that provides a wide array of manufacturing services, Kalow has built a solid reputation of responding quickly & personally to help our customers achieve their goals. Our experienced team & detailed processes continue to result in dependable quality. We are also CSA Recognized. Like our motto says: "Tell us what you need - we'll make it happen."

Quality Certifications: CE • ETL • UL508a CERTIFIED • ITAR / ISO 9002
KIMCHUK INC.     Booth # 450
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Electronic • Engineering & Technical Services • Assemblies - Turnkey • Electronics - New Product Development

A Veteran Owned Small Business Electronic Manufacturing Services organization with a world class state-of-the-art facility, Kimchuk is a fast paced, technologically advanced, high product mix electronics firm specializing in Electronic and Electromechanical Contract Manufacturing Services and Engineering Services that is committed to excellence.

Quality Certifications: IPC-A-610D, IPC-J-STD • ISO 9001-2000 • AS 9100 • ITAR REGISTERED
LAMOTHERMIC PREC. INVEST. CASTING CORP.     Booth # 113
Service Categories: Castings - Investment • Castings - Steel • Castings - Ferrous

We manufacture investment castings from fractional ounces to 70 lbs. In-house capabilities include CNC machining, NDT, heat treating & complete to print parts.



LASER ADVANTAGE LLC     Booth # 526
Service Categories: Laser Welding - Mold Repair • Laser Marking • Laser Cutting • Lasers • Laser Drilling

Nation-wide laser job shop, service department, and systems group that delivers complete laser synergy. We pride ourselves in being your total laser provider and building strong partnerships with our clients! ISO COMPLIANT.

Quality Certifications: AMER WELDING SOCIETY • ANSI STANDARDS
LEADER TECH INC.      Booth # 549
Service Categories: Shielding - EMI/RFI

We are a US manufacturer of EMI shielding products for circuit boards, electronic enclosures, interconnect cables and thermal solutions. Offerings include standard and custom circuit board shields/PC board shields, beryllium copper fingerstock, EMI gaskets, conductive elastomers, thermal interface materials, advanced RF absorber materials and EMI/RFI ferrites.



Quality Certifications: ISO 9001
LEE SPRING     Booth # 243
Service Categories: Springs - Coil • Springs - Flat • Springs - Wave • Stampings - Fourslide

Springs in stock ready to ship or made to your specifications. Large selection of stock Compression, Extension, Torsion, HEFTYTM Die, REDUXTM Wave, LeePTM Plastic Composite, MIL-SPEC, Belleville Washer, Battery and Constant Force Springs. Custom Springs, Stampings, Wire Forms and Fourslide design and manufacturing. Prototypes through large production runs.



Quality Certifications: ISO 9001 • RoHS / REACH • MIL SPEC AS24585 • MIL SPEC AS24586
M & H ENGINEERING     Booth # 501
Service Categories: Machining - Precision CNC • Assemblies - Mechanical • EDM - Wire • Laser Engraving • Prototypes - Machining

We have acquired a wealth of experience and knowledge in the Aerospace, Defense, Semiconductor and Medical fields and have been the recipient of many vendor awards. Let us help you turn your designs into reality.

Quality Certifications: AS 9100 ISO 9000 • ISO 13485 • ITAR REGISTERED • FDA REGISTERED
MACH MACHINE INC.     Booth # 323
Service Categories: Machining - Precision CNC • Engineering & Technical Services • Machining - CNC Milling & Turning • Machining - Production • Machining - Aluminum

We are a state of the art CNC machining and engineering facility, capable of delivering built to print all in-house. Our manufacturing facility is capable of any scale of manufacturing from prototyping to full production.

Quality Certifications: ISO 9001:2015 • ITAR • FEDERAL FIREARMS LICENSE - FFL
MARION MFG. CO.     Booth # 327
Service Categories: Stampings - Metal • Stampings - Fourslide • Stampings - Progressive Die • EDM - Wire • Machining - Precision CNC

Intricate metal stampings; short to long run, flat springs, terminals, wire forming, progressive eyelets, assemblies, tool and die, low volume custom components to high volume high speed. From design to production.



Quality Certifications: ISO 9001:2015 • IATF 16949:2016
MCALPIN INDUSTRIES INC.     Booth # 137
Service Categories: Fabricating - Sheet Metal • Stampings - Metal • Assemblies - Electromechanical • Welding - Robotic • Metal Finishing - Electroless Nickel

Our in-house capabilities include precision sheet metal fabrication, mechanical & electro-mechanical assemblies, low-high volume metal stamping, prototype design assistance & build, manual & robotic welding, high volume zinc & electroless nickel plating, and powder coat painting.

Quality Certifications: IATF 16949:2016
MCPP     Booth # 440
Service Categories: Plastics - Raw Materials • Plastics - Elastomeric Overmolding • Plastics - Two Shot Injection Molding • Plastics - Extruded Profiles • Plastics - Blow Molding

A producer of Thermoplastic Elastomer (TPV) fully vulcanized product lines. MCPP specializes in small lot - fully compounded colors.

Quality Certifications: ISO 9000:2008 • ISO 9001:2015 CERTIFIED
MECHANICAL DRIVE COMPONENTS INC.     Booth # 520
Service Categories: Machining - Production • Assemblies • Machining - CNC Milling & Turning

A production CNC machine shop featuring engineering and design services, CNC turning and machining capabilities, as well as finished part assembly. With these varied in-house capabilities, we are able to provide our customers with a full service option; taking their parts from conception through design, manufacturing, and assembly.

Quality Certifications: ISO 9001:2015 • AS 9100D
MERCURY CORP.     Booth # 301
Service Categories: Fabricating - Sheet Metal • Metal Cabinets & Enclosures • Assemblies - Turnkey • Fabricating - Aluminum • Fabricating - Stainless Steel

AN INTEGRATED SOLUTION TO YOUR SUPPLY CHAIN - we build custom racks, frames, enclosures, plastics & stamping assemblies. CORE PROCESSES: Design, Metal Fabrication, welding of all types of metals, Plastic Injection Molding, Finishing, Turn-Key Assemblies & KAN BAN.



Quality Certifications: ISO 9001:2008 • ISO 13485 • AS 9100 • ITAR REGISTERED
METAL WORKS INC.     Booth # 423
Service Categories: Fabricating - Sheet Metal • Prototypes - Rapid Sheet Metal • Powder Coating • Engineering & Technical Services • Assemblies - Turnkey

FASTEST LASER CUTTING IN THE REGION. A company focused on precision sheet metal fabrication and related assembly services. We offer the experience and efficiency to deliver cost-effective solutions with the utmost quality and reliability. We believe that the customer/supplier relationship is the key to our competitiveness. WE LOVE TO BUILD PROTOS! 24 HOUR TO 2 WEEKS

Quality Certifications: ISO 9001:2015 • UL LISTED • ITAR • MIL-STD-45208A
METALLON INC.     Booth # 430
Service Categories: Stampings - High Volume • Stampings - Progressive Die • Stampings - Ferrous & Non Ferrous • Stampings - Metal

High volume precision stampings. Progressive dies run in presses up to 150 tons. Added value: welding, staking, tapping & assembly. Product design assistance, prototyping.



Quality Certifications: ISO/TS 16949 • ISO 9001 • ISO 14001
MINDRUM PRECISION INC.     Booth # 207
Service Categories: Machining - Precision CNC • Optical Components • Ceramic Parts • EDM - Wire • Machining - Ceramics

Precision custom machining & polishing components & assemblies. 5-axis CNC milling, turning surface grinding, plano, spherical & cylindrical polishing glassblowing, acid etching, soldering & wire EDM. Materials: glass, quartz, sapphire, ceramics & similar. Aluminum, stainless steel, titanium & similar. 1,000 clean room 100 under hood.

Quality Certifications: ISO 9001:2008 • MIL-I-45208A
MINOR RUBBER CO. INC.     Booth # 242
Service Categories: Rubber Molding • Rubber - Injection Molding • Extrusions - Rubber • Rubber - Compression Molding • Rubber - Transfer Molding

Custom molders, extruders and dip molders of rubber products. Also extensive line of standard catalog items, such as grommets, bumpers, extruded profiles, isolators, bellows, etc. Most items are searchable online at www.minorrubber.com.



Quality Certifications: MIL-I-45208A
MOLDED DIMENSIONS INC.     Booth # 325
Service Categories: Rubber Molding • Rubber - Polyurethane Molding • Urethanes - Molded/Extruded • Rubber - Injection Molding • Rubber To Metal Bonding

Custom molder of rubber & cast polyurethane products. Engineered elastomer solutions. Compression, injection, transfer & open cast molding. Specializing in precision molded rubber to metal bonding. Worldwide manufacturing capabilities.



Quality Certifications: ISO 9001:2008
NAZARETH INDUSTRIAL CORP.     Booth # 538
Service Categories: Plastics - Injection Molding • Tooling - Plastic Injection Molding • Plastics - Insert Injection Molding • Quality Assurance • Tooling - EDM

We excel in manufacturing high quality, close tolerance, injection molded plastics and have been for over 30 years! Nazareth Industrial Corporation's production processes are ISO 9001 certified and we consistently maintain a 99% plus achievement in Quality, Delivery and Production Conformance.

Quality Certifications: AS 9100 / ISO 9001:2015
NEW ENGLAND SMALL TUBE CORP.     Booth # 233
Service Categories: Tube Bending & Fabricating • Brazing • Tubular Parts - Die Swaged

Small stainless steel tube bending & fabrication. Cut tubing, laser welding, centerless grinding, honing, machining, elbows, manifolds, blood sample probes, preheater tubes & tube forms.

Quality Certifications: ISO 9001:2015
NEW JERSEY PRECISION TECHNOLOGIES INC.     Booth # 245
Service Categories: EDM • EDM - Wire • EDM - Sinker

Wire EDM & Sinker EDM & EDM Drilling services using all state-of-the-art, Mitsubishi, anti-electrolysis machines, specializing in medical devices, tool & die components, plastic extrusion tooling. Prototype & Production EDM services are performed on submerged arc machines with auto-threaders. 40 CNC EDM machines & dozens of CNC machining centers. FAST 24/7 SERVICE!



Quality Certifications: ISO 9001:2008 • ISO 13485:2003
NEXUS DESIGN LLC     Booth # 406
Service Categories: Engineering & Technical Services • Industrial Design Services • Mechanical & Electronic Design • Electronics - New Product Development • Tooling - Models & Prototypes

We are a full service industrial design and engineering firm, developing new products from initial concepts to detailed, production ready designs for a wide variety of clientele. Services offered by Nexus Design: Industrial Design, Mechanical Engineering, Electronics Integration, and Vendor Sourcing.

NIANTIC SEAL     Booth # 404
Service Categories: Gaskets, Seals, Washers & O-rings • Die-Cutting • Shielding - EMI/RFI • Rubber Molding • Hoses, Clamps & Fittings

A distributor/fabricator of high performance seals, custom fabricated hoses and gasket materials. We also provide custom fabrication capabilities covering a broad range of engineered seals, die-cut/molded parts, and specialty hose assemblies.

Quality Certifications: A.S.M.E. SECTION IX • ISO 9001:2015 • ITAR • MIL-STD-248
NITOR CORP.     Booth # 532
Service Categories: Lasers • Laser Marking • Laser Engraving • Laser Cutting

Laser marking and engraving, Problem Solving Job Shop!

NORTHEAST COATING TECHNOLOGIES     Booth # 511
Service Categories: Coatings - Physical Vapor Deposition • Coatings - Titanium Nitride • Coatings • Nitriding

A provider of PVD coatings, Diamond Like Carbon (DLC) coatings, Plasma ion Nitriding and Melonite salt bath ferritic nitrocarburizng. Our surface treatments are used by the medical\dental, aerospace, firearms, cutting tool users and manufacturers, injection molders, automated equipment manufacturers and companies interested in improving the life of their components.

Quality Certifications: ISO 9001:2008 • AS 9100
OMNI COMPONENTS CORP.     Booth # 539
Service Categories: Machining - Multi Axis • Machining - Swiss Laser & CNC Swiss • 3D Printing • Machining - Robotic • Welding - Laser

Manufacturer of precision machining services and engineered solutions to a wide variety of industries. CNC Swiss to 1 1/4 in. diameter, mill/turn lathe to 2 3/4 in. diameter, milling, prototyping, laser marking, EDM, assembly and turnkey support for a complete part.

Quality Certifications: ISO 9001:2015 CERTIFIED • 13485 MEDICAL • ITAR / RoHS
OSDA     Booth # 332
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Electronic • Assemblies - Turnkey

EMS providing quick turn prototype Printed Circuit Board Assemblies. We also provide small to medium production after a successful prototype release. OSDA provides turn-key, consigned, X-Ray services, Burn-In services and final assembly. OSDA has been the premier SMT assembler since 1987 in the New England Area.

Quality Certifications: AS 9100, ISO 13485 • ISO 9001:2000 • IPC 610 • CSA APPROVED, UL APPROVED
PCM PRODUCTS INC.     Booth # 119
Service Categories: Photochemical Etching & Machining • Shielding - EMI/RFI • Chemical Milling

We produce precision, burr/stress free parts, .1" thick down to .0001" thick. In-house plating, forming, heat treating and assembly. Competes with laser cutting and EDM. COMPLIANT TO ISO 9001:2000 & AS9100B & ANSI/ASQ Z1.4-2003.



Quality Certifications: MIL-I-45208
PEKO PRECISION PRODUCTS INC.     Booth # 351
Service Categories: Assemblies - Turnkey • Machining - CNC Milling & Turning • Fabricating - Sheet Metal • Systems Integration • Special Machinery - Design, Build & Rebuild

A Vertically Integrated Contract Manufacturer with four major divisions: CNC Machining: 85 turning & milling CNC machines; the largest is 106" x 161" x 42", Sheet Metal/Stamping with state-of-the-art equipment including robotic welding. Assembly Division: Assembly & test of top level OEM product/equipment. Systems Division: Design & build automated test & assembly equipment.



Quality Certifications: ISO 9001:2000 • ISO 13485 • AS 9100 • TUV / UL CERTIFIED
PENNSYLVANIA STEEL CO. INC.     Booth # 212
Service Categories: Saw Cutting • Fabricating - Aluminum • Fabricating - Stainless Steel

Production cutting: Aluminum, Stainless, Cold finish, Alloy, Tool Steel, Brass. Precision plate cutting: Aluminum, Stainless, Tool Steel. Also available: Milling, Grinding, Gun-Drilling, Hollow Bar.

PGC WIRE & CABLE LLC     Booth # 344
Service Categories: Wire & Cable Harnesses • Assemblies - Cable • Assemblies - Electromechanical

Assembling wire harness, cable and electro-mechanical assemblies since 2012. At PGC Wire and Cable, LLC (formerly known as RAPID Wire and Cable), our core strength is our experience in building so many different types of assemblies and harnesses. This experience has enabled us to achieve a 98.6% quality satisfaction rating and a strong, reliable track record.

Quality Certifications: ISO 9001:2015 CERTIFIED • UL CERTIFIED • IPC-A-620 CERT/ITAR
PHOTO ETCH TECHNOLOGY     Booth # 437
Service Categories: Photochemical Etching & Machining • Laser Cutting • Fabricating - Stainless Steel • Prototypes - Rapid Sheet Metal • Surface Mount Technology - Assembly

Chemical etch parts, laser cut & electro forming of thin metal parts. Laser cut, electro form, multi-level, nano coated, Phd, FG, nickel smt stencils. Superior quality mesh screens for thick film, ink, and other print applications. Laser plotting & film/pcb scanning services. Quick turn specialists! Manufacturing facilities in MA, NJ, FL and CA. 100% made in the USA!
<