Southeast Design-2-Part Show
October 10 & 11, 2018
Raleigh Convention Center • Raleigh, NC



Search by Category

or

Search by Keywords


  Reset Search  



0 Exhibitors to Meet

Exhibitor List


Listed below are the current exhibitors and service categories of companies in the show.
This page is also an interactive tool for you to use when planning your personal visit.

[ 142 ] companies match your search.
FEATURED EXHIBITORS listed first alphabetically
ACCURATE METAL FINISHING LLC     Booth # 323
Service Categories: Metal Finishing - Anodizing • Metal Finishing - Electropolishing • Metal Finishing - Hard Coating • Metal Finishing - Chromate • Metal Finishing - Passivating

Now under new Ownership. Accurate Metal Finishing LLC has been successfully operating since the late 60's; we now look forward to operating and growing to our full potential offering large and small capacity finishing of Aluminum and Stainless steel including Anodizing Type II and Type III, Chromate, Electropolishing and Passivation.

www.accuratemetalfinishing.com

Quality Certifications: ISO 9001 • LOCKHEED MARTIN • BAE APPROVED
ADVANTAGE INTERNATIONAL REGISTRAR INC.     Booth # 336
Service Categories: Certification Services • Educational Services

Specializes in providing fair and professional ISO 9001, ISO 14001 and AS 9100 management system assessment and registration services. Affordable - Responsive - Integrity - Focused - Value Added - Internationally Recognized.

www.advantageregistrar.com

Quality Certifications: ANAB
AIP PRECISION MACHINING     Booth # 332
Service Categories: 3D Printing • Machining - Precision CNC • CAD Design Services • Consulting - Manufacturing • Engineering & Technical Services

It is the extensive knowledge and diligent craftsmanship of our engineers, machinists, programmers and seasoned veterans that allow us to deliver unmatched precision in plastics manufacturing. AIP Precision Machining specializes in understanding and envisioning how to manufacture extremely complex designs quickly and in the most cost-effective manner.

www.aipprecision.com

Quality Certifications: ISO 13485:2016 MEDICAL • AS 9100 ISO 9000 • ISO 9001:2015 • FDA REGISTERED
AMERICAN MECHANIZED TECHNOLOGY     Booth # 429
Service Categories: Machining - CNC Milling & Turning • Machining - Production • Machining - Large Parts • Machining - Miniature Precision • Machining - Production

Our CNC Fabrication Division has well over 100 years of collective manufacturing experience. This experience is put to work with new top-of-the-line technology to offer services and capabilities above that of our competitors. AMT's Mazak CNC Department boasts a range of new equipment, capable of producing parts with general locational tolerances at +/- 0.003".

www.amt-us.net

Quality Certifications: 6 SIGMA
ASH INDUSTRIES     Booth # 140
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Plastics - Insert Injection Molding • Plastics - Hot Stamping & Screening • Prototypes - Plastic

Engineered for You. In-House MIM, Thermoplastic, and Silicone Injection & Roto Molding & Tooling as well as cast epoxy components & 7-Axis Swiss Lathe production. Molding includes custom inserts & over-molding, two shot molding. Component assembly, secondary processing & decorating, utilizing the latest in CNC, EDM & Modeling technology.

www.ashindustries.com

Quality Certifications: ISO 9001 • ISO 7 CLASS 10K CLEAN ROOM
ATLAS PRECISION INC.     Booth # 446
Service Categories: Plastics - Injection Molding • Tooling

A full service Injection Molding and Tooling operation. We are located in Arden, NC just minutes outside of Asheville, NC. Specializing in the design, build, run process using scientific molding practices.

www.atlas-plastics.com

Quality Certifications: ISO 9001:2008
CR METAL PRODUCTS     Booth # 240
Service Categories: Fabricating - Sheet Metal • Powder Coating • Laser Cutting • Welding - Robotic • Screen Printing

A custom metal fabrication facility/contract manufacturer specializing in precision sheet metal fabrication, powder coated finishes, & silkscreening.

www.crmetal.com

Quality Certifications: ISO 9001:2008
DB ROBERTS     Booth # 101
Service Categories: Fasteners • Electronic Hardware • Assembly Hardware • Levers, Knobs & Handles • Masking

Since our inception, we have been focused on providing solutions for fastener applications in Sheet Metal Fabrication, Metalworking, and Industrial Electronics. Our "Superior Customer Service" and "Commitment to Excellence" has proven to be a winning formula fueling innovation and rapid growth year after year.

www.dbroberts.com

Quality Certifications: ISO 9001:2008 • AS9120A
DESIGN-2-PART MEDIA     Booth # 000
Service Categories: Publications

Published since 1984, Design-2-Part Magazine is one of the country's oldest publications specifically devoted to showcasing manufacturing companies who specialize in helping OEM's take their product from design to part.

www.reachengineers.com

DURATECH INDUSTRIES     Booth # 305
Service Categories: Labels, Tapes & Decals • Switches - Membrane • Plastics - In Mold Labeling & Decorating • Shielding - EMI/RFI • Nameplates, Dials & Panels

A full-service manufacturer of custom graphics, specializing in screen printed products including graphic overlays and pressure sensitive products. We also offer in-mold decorating, forming, digital printing, doming, membrane switches and in-mold electronics. ISO 9001:2008 Certified. Offering UL/CSA recognized constructions.

www.duratech.com

Quality Certifications: ISO 9001:2008 • CSA & UL APPROVED • CUL APPROVED
DYNAMIC STAMPINGS OF NORTH CAROLINA     Booth # 113
Service Categories: Stampings - Short Run • Stampings - Metal • Fabricating - Sheet Metal • Stampings - Brass • Stampings - Copper

One-Stop Shop for Low Volume metal stampings (100 - 10,000 pieces). Hard tooled die sets start at just $185.00. One-Time tool charge for the Life-Of-The-Part. RFQs quoted complete to print within 48 hours. All metals .010" to .250" thick.

www.dynamicstampings.com

DYNAMIC TUBE INC.     Booth # 432
Service Categories: Tube Bending & Fabricating

A leading supplier of fabricated tubing, hydraulic power and supply lines, diesel fuel lines and a variety of specialty tube and pipe assemblies. Dynamic Tube Inc. produces prototype, production and after-market parts for a variety of Industries including: Heavy Construction OEM's, Agricultural Equipment OEM's, Marine, Gas and Diesel Engine manufacturers, etc...

www.dtitube.com

Quality Certifications: ISO 9001
ENGINEERING RESOURCE CENTER     Booth # 349
Service Categories: Prototypes - Plastic • Tooling - Plastic Injection Molding • Tooling - Models & Prototypes • Plastics - Low Volume • Molds & Moldmaking - Plastic

At The ERC, we believe that tooling costs should not stand in the way of developing great products. Our unique, inexpensive tooling solutions allow us to offer globally competitive pricing on plastic prototypes and custom injection molds - right here in the USA!

www.theerc.com

FONDREMY INC.     Booth # 308
Service Categories: Castings - Aluminum • Castings - Permanent Mold • Castings - Sand • Castings - Brass • Machining - Precision CNC

Permanent Mold & Sand Castings for Aluminum and Bronze Alloys. In-house Machining, Spectrometry, Dimensional Report and Pouring Robot. Quantities from 1 to 100,000 pcs. Capability from 0.5 lbs. to 400 lbs. for AL and 0.5 lbs. to 750 lbs. for BRZ. No lead alloy (Bismuth).

www.fondremy.com

Quality Certifications: ISO 9001:2008
FOX VALLEY SPRING LLC     Booth # 109
Service Categories: Springs - Coil • Springs - Flat • Wire Forming & Fabricating • Stampings - Fourslide • Stampings - Short Run

Manufacturer of custom springs, wire forms and metal forms. We utilize SPC systems, CNC coilers and experienced craftsmen to assure consistent quality. Design assistance and rush orders are welcome. Wisconsin Grand Manufacturer of the Year. We Quality Certify each process & provide a total Value-added supplier package. 10 piece minimum for custom spring and wire forms.

www.foxvalleyspring.com

Quality Certifications: ISO 9001:2008 • ITAR CERTIFIED
GTI PRECISION COMPONENTS     Booth # 449
Service Categories: Machining - Precision CNC • Machining - Multi Axis • EDM - Wire • Electronic Enclosures • Optical Components

A CNC machine shop serving high tech industries. Our focus is on complex, precision parts where dimensional and cosmetic perfection are required. Customers who's part geometries require 5-axis milling, multi-axis turning, and/or wire EDM is where we excel. From production to inspection to delivery, GTI takes owner ship of your product.

www.gtiprecision.com

Quality Certifications: ISO 9001:2008 REGISTERED
H & H POLISHING     Booth # 234
Service Categories: Metal Finishing - Polishing • Surface Finishing • Tanks & Reservoirs • Deburring

A nationally recognized ISO-9001:2008 Certified Metal Finishing Company. We are the largest metal polisher in the Southeast, and service a wide variety of products and industries. We provide JIT delivery on more than half of the products we service out of our 24,000 sq. ft. facility in Charlotte, NC.

www.hhpolishing.com

Quality Certifications: ISO 9001:2008
HOLTS PRECISION     Booth # 452
Service Categories: Calibration & Metrology • Inspection Services • Gaging - Custom Engineered • Quality Control • Quality Assurance

One of the oldest Calibration, Gage Repair, Gage Sales & Contract Inspection companies in the world. HOLTS Precision Inc. Offers New & Refurbished CMMs, Gage Sales, Gage Calibration, Hand Tool Repairs & Part Inspections to New England Manufacturers & Businesses. Our talented staff at our South Windsor, CT, Nashua, NH & West Bridgewater, MA facilities are equipped to perform repairs & calibrations on all major brands of gaging equipment.

www.holtsprecision.com

Quality Certifications: ISO 17025
ISE ENTERPRISES     Booth # 421
Service Categories: Machining • Machining - Precision CNC • Machining - CNC Milling & Turning • Plastics - CNC Machining • Plastic Cabinets & Enclosures

Diverse contract manufacturer/fabricator offering metals, plastics and composites capabilities. Our experienced team assists customers with design support, component performance optimization, cost effective value and material selection.

www.iseent.com

J & R MACHINE INC.     Booth # 324
Service Categories: Machining - CNC Milling & Turning • Machining - Production • Machining - Precision CNC • Machining - Conventional CNC • Machining - Castings

We are a knowledge based CNC manufacturing facility solving complex production machined part problems through close engineering support, CNC machining, exceptional quality, customer service, and value-added manufacturing project management. Additional Services: Robotic Welding, Mechanical Assembly, Thread Rolling, Sourcing of Die-Casting, Forgings and Extrusions.

www.jrmachine.com

Quality Certifications: ISO 9001:2015
LIGHT METALS COLORING CO. INC.     Booth # 138
Service Categories: Metal Finishing - Anodizing • Metal Finishing - Hard Coating • Metal Finishing - Phosphating • Laser Marking • Metal Finishing - Dry Lubrication

Bulk, rack, hardcoat anodizing - all colors, sizes .050" up to 15 feet. Other services include - Manganese Phosphating (Steel), dry film lubricants, passivation, chromate conversion coatings, Laser Marking & plating. One of the largest anodizers & metal finishers in the USA.

www.lightmetalscoloring.com

Quality Certifications: ISO 9001:2000 • NADCAP APPROVED
MASTER ELECTRONICS     Booth # 315
Service Categories: Electronic Components • Electronic Hardware • Electronic Enclosures • Motion Control • Motors & Drives

A leading authorized distributor of electronic components, Master Electronics stocks over 360,000 unique part numbers to serve the company’s diverse customer base with nine stocking locations in North America.

www.masterelectronics.com

Quality Certifications: ISO 9001:2015
MERCURY MACHINING CO. INC.     Booth # 418
Service Categories: Machining - Precision CNC • Machining - CNC Milling & Turning • Machining - Weldments • Welding & Weldments • Grinding - Surface

A production manufacturing facility specializing in CNC milling and turning. We also do welding & fabrication, prototype work, cylindrical and surface grinding.

www.mercurymachining.com

MORNINGSTAR CAM SOLUTIONS     Booth # 433
Service Categories: CAD/CAM Software • CAD/CAM Training • Machining - Aluminum • Machining - Multi Axis • Machining - Precision CNC

For more than 30 years, we have been providing CAD/CAM software to manufacturing companies and educators throughout the Carolinas, Tennessee and Virginia. While our primary focus is on sales, training, and support of GibbsCAM® software, we also offer reverse engineering, CNC programming, and up to 5-axis CNC machining services.

www.morningstarcam.com

ON-POINT MACHINING LLC     Booth # 344
Service Categories: Machining - CNC Milling & Turning • Machining - Aluminum • Machining - Stainless Steel • Machining - Precision CNC • Threaded Parts

We are a contract manufacturer specializing in short and long run production. Family owned and operated machine shop offering precision CNC milling and turning of metals and plastics such as delrin, brass, aluminum, stainless steel, and more. We also offer anodizing and heat treating via our partners.

www.on-pointmachining.com

PROTIQ USA     Booth # 435
Service Categories: 3D Printing • Prototypes - Plastic • Tooling - Models & Prototypes • Rapid Prototyping • Heating Elements - Electric

Online Direct, Industrial Grade 3D Printing Service provider for plastic and metal materials. We utilize high quality, industrial printing technologies including SLS, DMLS, SLA and Polyjet/MultiJet. Our broad range of 3D printed Polymer/Plastic and Metal materials include both standard and proprietary options including: PA 6X, High Conductive RS Copper, Brass and more.

www.protiq.com

Quality Certifications: ISO 9001 • ISO 14001 • BSOHSAS: 18001:2007
REYNOLDA MFG. SOLUTIONS     Booth # 236
Service Categories: Machining - CNC Milling & Turning • Screw Machining - Multi Spindle • Screw Machining - Swiss/CNC Swiss • EDM - Wire • Machining - Multi Axis

A full service contract manufacturer, we operate a variety of CNC mills and turning machines. We specialize in short and medium run production parts. We work in stainless, brass, low/no lead brass, aluminum, free machining steel and Hastalloy. Also, a 2nd location at 3304 Maple Avenue, Burlington, NC 27215.

www.reynolda.com

Quality Certifications: MIL STD 45662 • MIL-I-45208A
SARGENT METAL FABRICATORS     Booth # 443
Service Categories: Fabricating - Sheet Metal • Laser Cutting • Prototypes - Fabrication • Welding - Robotic • Powder Coating

A third generation, family owned business providing customer metal fabrication solutions for over 40 years, & is a company built on integrity & hard work. Sargent Metal Fabricators is based in Anderson, SC where we call a 21-acre campus with an 80,000 sq. ft. mfg. facility home. Our mission is to be the supplier of choice providing fabricated-metal-products, by utilizing a Balanced Value System of Quality, Delivery, Price, and Responsiveness.

www.sargentmetal.com

Quality Certifications: AWS Welding • ISO 9001:2015 CERTIFIED • PPAP's • LEAN SIX SIGMA
SMALLEY     Booth # 129
Service Categories: Snap Rings & Retaining Rings • Springs - Coil • Springs - Wave • Springs - Flat • Fasteners

We are the exclusive manufacturer of the industry-leading Spirolox® Retaining Rings, an innovative design that features a no gap, 360° retaining surface without protruding ears to interfere with mating components. We are also the originator of Crest to Crest® Wave Springs which save up to 50% of space compared to conventional coil springs.

www.smalley.com

Quality Certifications: ISO 9001 & ISO 13485 • IATF 16949 • AS 9100 • ISO 14001
TAPECON INC.     Booth # 417
Service Categories: Labels, Tapes & Decals • Switches - Membrane • Fabricating - Foil, Films & Foams • Screen Printing • Die-Cutting

We work with product teams to improve market competitiveness by manufacturing functional graphics, materials, and complete products to improve look, feel, and usability. Tapecon provides expertise in specialized printing and converting, flexible electronics, and contract manufacturing of disposable devices for medical and industrial markets.

www.tapecon.com

Quality Certifications: ISO 13485:2016 • ISO 9001:2015 • ITAR, UL APPROVED • FDA Registered Device Mfr.
TBR ELECTRONICS     Booth # 238
Service Categories: Electronics - New Product Development • Assemblies - Electronic • Assemblies - Printed Circuit Boards • Prototypes - Electronic • Surface Mount Technology - Assembly

Full service electronics engineering & PCB assembly. Specializing in ultra-low power embedded system development, embedded Wi-Fi, Linux, ARM, SQL database design and Visual Studio. NET development. Turnkey PCB assembly for fast prototype & production quantities.

www.tbrelectronics.com

U.S. MACHINE & TOOL     Booth # 434
Service Categories: Stampings - Metal • Fabricating - Steel • Laser Cutting • Waterjet Cutting - Metal • Welding - Robotic

Established in 1985, we are a world class supplier of Metal Stamping, Metal Fabrication, and Robotic Welded Sub-Assemblies. U.S. Machine & Tool's Tyrone campus encompasses 2 buildings, totaling over 70,000 sq. ft. of manufacturing space. We offer 30+ stamping presses up to 400 tons. We also offer a full-service tool room as well as a Laser/Waterjet fabrication department.

www.usmachineandtool.com

Quality Certifications: ISO 9001:2015
ULTIMAKER - ULTIMATE 3D PRINTING STORE     Booth # 210
Service Categories: 3D Printing • Rapid Prototyping • Rapid Prototyping - Equipment

Ultimaker and Ultimate 3D Printing Store share the vision to make 3D printing accessible to all. It is why all of our desktop printers are extremely quiet, fast, accurate, reliable and effortless to use, embraced by professionals and novices alike. Ultimaker is one of the most successful and reliable open source 3D printing companies in the world.

www.ultimate3dprintingstore.com

3D MACHINE INC.     Booth # 245
Service Categories: Machining - CNC Milling & Turning • Waterjet Cutting - Metal • Screw Machining - Swiss/CNC Swiss • Assemblies • Laser Machining

A complete contract manufacturer offering CNC Machining, Waterjet, Assembly, Swiss Turning and Laser, and Supply Chain Management solutions. Focused on Lean Six Sigma continuous improvement methods to provide the lowest cost to our customers.



Quality Certifications: ISO 9001:2015
ABATEK (AMERICAS) INC.     Booth # 428
Service Categories: Rubber - Compression Molding • Tooling • Assemblies - Electromechanical • Gaskets, Seals, Washers & O-rings • Switches - Membrane

Specializing in Human Machine Interfaces (HMI), Abatek is a global leader for Automotive, Medical, Industrial & Communications Industries with roots in silicone rubber keypads, connectors, & sub assemblies. Global sales, local engineering & logistics, and wholly-owned manufacturing sets us apart. Contact Ken Marbert at 678-684-5412 or ken.marbert@abatek.com.

Quality Certifications: ISO 9001 • TS 16949
ACME WIRE PRODUCTS CO. INC.     Booth # 124
Service Categories: Wire Forming & Fabricating • Welding & Weldments • Baskets • Fabricating - Stainless Steel • Assemblies - Mechanical

Precision custom fabrication of wire & sheet metal components using steel and stainless steel. Wire forming capabilities .050" to .500" diameter. Design, tool making, CNC forming, bending, machining, presswork, threading, stamping, resistance welding, robotic welding, assembly & specialty packaging. Powder coating & fluid bed finishing. Design assistance for new projects.



Quality Certifications: ISO 9001:2015
ALEXANDRIA METAL FINISHERS     Booth # 204
Service Categories: Metal Finishing - Hard Coating • Metal Finishing - Anodizing • Metal Finishing - Electroplating • Metal Finishing - Precious Metal Plating

Anodizing, electroplating, & chemical finishing services including: hardcoat, sulfuric (colors & clear) & chromic anodizing; gold, silver, electroless nickel, rhodium, nickel, tin, copper & zinc plating; electropolishing of stainless steel. Mil Specs. Special Capabilties: Type II Anodizing up to 20ft. and Type III Anodizing up to 16ft. Visit www.alexandriametalfinishers.com for more.

Quality Certifications: ISO 9001:2015 • NORTHROP GRUMMAN • LOCKHEED MARTIN • RAYTHEON
ALINABAL INC.     Booth # 320
Service Categories: Stampings - Metal • Assemblies - Electromechanical • Stampings - High Volume • Stampings - Shims • Stampings - Short Run

Providing an extensive span of manufacturing and assemblies capabilities to a wide range of OEM markets including medical, commercial, aerospace, industrial and automotive. Our products range from stampings, shims, laminations and assemblies just to name a few.

Quality Certifications: AS 9100 • ISO 9001:2008 • ISO-TS16969
ALLIED TOOL & DIE INC.     Booth # 339
Service Categories: Stampings - Ferrous & Non Ferrous • Stampings - Metal • Stampings - High Volume • Stampings - Progressive Die • Tools, Dies & Fixtures

We specialize in high quality precision and custom metal stampings. Industries we serve: Automotive, Power Equipment, Medical, Consumer Goods, Aerospace, Industrial, Lawn & Garden. Many value added services. OFF SHORE PRICING / ONSHORE RELIABILITY.



Quality Certifications: ISO 9001:2015
ALRO STEEL & PLASTICS     Booth # 322
Service Categories: Aluminum - Materials • Alloys • Cold Drawn Steel Profiles - Cold Rolled Steel • Stainless Steel - Materials • Waterjet Cutting - Metal

We have grown to over 60 locations in 12 states. Alro distributes metals, industrial supplies and plastics, offering cut-to-size metals and plastics with next day delivery to over 25,000 customers in North America. Alro sells a broad inventory of products under the following companies: Alro Steel, Alro Metals, Alro Metals Outlet, Alro Industrial Supply, and Alro Plastics.

Quality Certifications: ISO 9001:2008
AMERICAN PRODUCTS INC.     Booth # 206
Service Categories: Electronics - New Product Development • Assemblies - Electronic • Wire & Cable Harnesses • Assemblies - Printed Circuit Boards • Embedded Devices

Design and manufacture industrial electronic control systems including printed circuit board assemblies and wire harnesses.



Quality Certifications: ISO 9001:2015
AOC METAL WORKS      Booth # 423
Service Categories: Stampings - Metal • Fabricating - Sheet Metal • Laser Cutting • Tube Bending & Fabricating • Powder Coating

The Southeast's premiere metal sub-contract manufacturer. We specialize in stamping, precision sheet metal fabrication, powder coating, porcelain coating, welding & assembly.

Quality Certifications: ISO 9001:2008
APEXX OMNI-GRAPHICS     Booth # 123
Service Categories: Nameplates, Dials & Panels • Labels, Tapes & Decals

Manufacturer of custom labels, nameplates, decals, panels, dials, tags, spacers and insulators. Long and short runs. Immediate delivery. Providing dependable, prompt, courteous service since 1963.



ARC-TRONICS INC.     Booth # 216
Service Categories: Assemblies - Electronic • Assemblies - Electromechanical • Assemblies - Printed Circuit Boards • Assemblies - Turnkey • Prototypes - Electronic

We are a full-service Electronic Manufacturing Services (EMS) provider for turnkey products in printed circuit board assembly, cable/harness assembly, and complete box build or higher level integration. The company is ISO 9001:2008, ISO 13485:2003, and AS9100 Rev. C certified. Arc-Tronics is also an ITAR registered company.



Quality Certifications: ISO 9001:2008 • AS 9100 REV C • ITAR • ISO 13485:2003
ASSEMBLY FASTENERS INC.     Booth # 126
Service Categories: Fasteners • Slides • Assembly Hardware • Levers, Knobs & Handles • Safety Products & Components

Distributor of fasteners, latches, access and motion hardware specializing in PEM, Southco, Accuride, Panduit, Heyco, Sugatsune, Dodge, POP and many more. Ask us about our Vendor Managed Programs, Kitting & special packaging. RoHS Compliant.

Quality Certifications: ISO 9001:2008
BATESVILLE PRODUCTS INC.     Booth # 108
Service Categories: Castings - Permanent Mold • Castings - Aluminum • Castings - Zinc

Aluminum & zinc castings, engineering assistance, in-house tooling, machining & assembly. Castings from a few ounces to 80 lbs. Quantities from 500 to 150,000.



Quality Certifications: ISO 9001:2008
BEGOUN INC.     Booth # 121
Service Categories: Screw Machining - Swiss/CNC Swiss • Stampings - Metal • Stampings - Fourslide • Springs - Coil • Cold Heading - Cold Forming

Utilizing over 30 manufacturing partners, with hundreds of fabricating capabilities, we are able to provide you with virtually all of your outsourced, custom metal & plastic fabricated requirements. We also have the facilities to stock your parts in our warehouse & ship them as needed.



BULL ENGINEERED PRODUCTS     Booth # 202
Service Categories: Plastics - Injection Molding • Tooling - Plastic Injection Molding • Engineering & Technical Services • Die-Cutting

Plastic Injection Molding, Die Cutting & Rubber Molding.

Quality Certifications: ISO 9001:2008
BUTLER TECHNOLOGIES INC.     Booth # 225
Service Categories: Switches - Membrane • Labels, Tapes & Decals • Screen Printing • Nameplates, Dials & Panels • Prototypes - Electronic

For over 25 years Butler Technologies has been providing screen/digitally printed Membrane Switches, Overlays & Labels. Additional products and processes include printed electronic components, dials & gauges, rubber keypads & laser cutting service. Please ask about our Rapid Prototype Program.



Quality Certifications: ISO 9001 • UL APPROVED • ITAR • CSA APPROVED
C & K PLASTICS/VALLEY EXTRUSIONS     Booth # 114
Service Categories: Plastics - Thermoforming/Vacuum Forming • Plastics - Pressure Forming • Extrusions - Plastic • Plastics - Extruded Profiles • Plastics - Thermoplastic Extrusion

C&K Plastics and Valley Extrusions are sister plastic companies. Since 1963 C&K has specialized in cut sheet vacuum, pressure and twin sheet forming, also providing CNC machining and contract manufacturing. Since 2001 Valley has specialized in custom plastic extrusions with co-extrusions & tri-extrusions, large parts, complex hollows & tubing capabilities produced in most thermoplastics. Our three facilities have a combined 450,000 sq.ft. giving us the capacity to meet even the largest requirements. Valley Extrusions - PA, C&K - NJ, and C&K Georgia - GA.



Quality Certifications: ISO 9001:2008
C.E. SMITH CO. INC.     Booth # 208
Service Categories: Stampings - Metal • Laser Cutting • Assemblies - Stamped • Fabricating - Sheet Metal • Stampings - Progressive Die

Manufacturer of precision metal stampings, laser cutting, fabrications & assemblies, providing the efficient & responsive service our customers expect & deserve.

Quality Certifications: ISO 9001:2000
CALICO COATINGS     Booth # 222
Service Categories: Coatings - Teflon • Coatings - Physical Vapor Deposition • Coatings • Coatings - Titanium Nitride

Across numerous high-performance industries, Calico is applying coatings that withstand extreme pressure, reduce friction & wear – including PECVD, DLC, PVD, TiN, ceramic, Teflon®, thermal, non-stick dry film lubricants & more. Manufacturers need efficiency & cost control to be competitive. Calico's coatings are protective & wear resistant to extend part life & minimize replacement costs. Use our Search online to choose the specifications that will help you identify the right solutions at www.calicocoatings.com

Quality Certifications: F.F.L. • ITAR APPROVED / FFL
CAMERON MANUFACTURING & DESIGN     Booth # 125
Service Categories: Fabricating - Sheet Metal • Fabricating - Heavy Steel & Plate • Machining • Special Machinery - Design, Build & Rebuild • Engineering & Technical Services

Automation, Custom Machinery, OEM equipment. Metal Fabrication; Sheet Metal - Heavy Gauge (Carbon Steel, all grades of Stainless, exotic alloys). ASME Code Welding, Build-to-Print or Design & Build. Electrical Systems and Control Panels. Precision Machining, Pressure Vessels & Piping. Field Installation, Reverse Engineering, Contract Engineering, Design Analysis, Drawing Packages & Project Management.

Quality Certifications: ASME U / PP / R STAMPS • AWS • NACE • ITAR
CAPITAL CITY TOOL INC.     Booth # 219
Service Categories: Machining - CNC Milling & Turning • Grinding - Centerless • Machining - Multi Axis • Machining - Castings

We are a Production Machining facility with CNC Turning/Milling, Centerless Grinding, and many secondary service capabilities. CCT has warehouse capabilities to accomplish JIT shipping & we are one of Central KY's largest and fastest growing production machine shops. We produce quality machined products at competitive prices. Our satisfied customers are located world-wide and include many diverse industries.

Quality Certifications: ISO 9001:2015
CAPLUGS      Booth # 229
Service Categories: Plastics - Injection Molding • Plastics - Extruded Profiles • Die-Cutting • Tooling

A worldwide leader in product protection for over 70 years. We specialize in six different molding processes allowing us to offer a variety of design and material options. Our catalog highlights 15,000+ parts in stock and ready to ship. If a part doesn't meet your requirements, our team of engineers will work with you to design exactly what is needed.

Quality Certifications: ISO 9001 • IATF 16949 • ISO 13485 • ISO 14001
CARDINAL ALUMINUM CO.     Booth # 131
Service Categories: Extrusions - Aluminum • Metal Finishing - Anodizing • Fabricating - Aluminum Extrusions • Powder Coating

Custom aluminum extrusions; brite dip, color & architectural hard coat anodizing & powder coating, complete fabricating capabilities.



CARGO CONTROL USA     Booth # 440
Service Categories: Sewing • Lifting Device - Manual • Packaging • Assemblies

Established in 2004, we are a privately held, small business located in Sanford, NC. Cargo Control USA, LLC provides a full line of domestically manufactured cargo securement items, tie downs, and lifting slings. We specialize in custom made items either under our line of products or for private label, assembly, contract sewing, warehousing and distribution.

CENTURY SPRING CORP.     Booth # 120
Service Categories: Springs - Coil • Stampings - Fourslide • Wire Forming & Fabricating • Springs - Flat • Springs - Wave

A MW Industries location, is the go-to source for Made in USA stock and custom springs, for any OEM or MRO application. Same day shipments from over 35,000 stock designs - compression, extension, torsion, tapered, disc, urethane and die springs. Century also specializes in custom springs. Inquire at info@centuryspring.com. FREE CATALOG upon request.



Quality Certifications: ISO 9001:2008
CERTIFIGROUP     Booth # 430
Service Categories: Certification Services • Safety Certifications • Testing - Environmental • Testing - Materials • Testing - Mechanical Standards

The coming together of the very best in regulatory compliance, product safety and many other fields of testing and certification. CertifiGroup's experience comes from years of evaluating and testing systems, products, components, and equipment of every category and type imaginable. We deliver quality compliance and testing services, on-time and cost-effectively.

Quality Certifications: ANAB • NRTL CERTIFIED • METLAB
CLARK METAL PRODUCTS     Booth # 310
Service Categories: Fabricating - Sheet Metal • Metal Cabinets & Enclosures • Electronic Enclosures • Assemblies - Mechanical

An award-winning advanced manufacturing company, specializing in precision sheet metal fabrication. From our headquarters near Pittsburgh, PA, we provide cost-effective solutions, quality products, value-added services and on-time delivery to companies in a wide range of industries including electronics, healthcare, life science, transportation and robotics.

Quality Certifications: ISO 9001
CRADDOCK FINISHING CORP.     Booth # 106
Service Categories: Metal Finishing - Painting • Plastics - Painting • Shielding - EMI/RFI • Powder Coating • Pad Printing

Contract production painting (Metal/Plastics) - Powder, Liquid, CARC, Teflon, and EMI/RFI Shielding. Chemical pre-treatment including RoHS Chromate, Blasting, Pad Printing, Silk-Screening, Mask Making, High-Bake capability and Blister Packaging.



Quality Certifications: ISO 9001:2015 • CONTROL PLANS • FEMA • FLOW CHARTS - SPC
CW THOMAS      Booth # 132
Service Categories: Plastics - Thermoforming/Vacuum Forming • Plastics - Pressure Forming • Plastics - Low Volume • Prototypes - Plastic • Plastic Cabinets & Enclosures

For over 70 Years CW Thomas has been producing highly engineered plastic parts and assemblies, delivered when needed to our customers, and at fair and reasonable prices. We have an established reputation as an industry leader in expanding the viability of the thermoforming processes of Vacuum and Pressure forming.



Quality Certifications: ISO 9001:2008 • AS 9100C
DA/PRO RUBBER INC.     Booth # 116
Service Categories: Rubber Molding • Plastics - Injection Molding • Silicone / Rubber - Liquid Injection Molding • Rubber To Metal Bonding • Rubber - Compression Molding

5 facilities for compression/injection molding - high-quality custom rubber, TPE, & plastic components molded to precision tolerances such as diaphragms, seals, connectors, molded shapes, rubber to metal parts for medical device, electronic & aerospace industries. Class 10,000 cleanroom - chemists & engineers assist in optimal moldability. sales@daprorubber.com



Quality Certifications: ISO 9001
DECO PRODUCTS CO.     Booth # 233
Service Categories: Castings - Die, Zinc • Castings - Die • Castings - Zinc • Metal Finishing - Electrostatic Painting

Functional precision zinc die castings, all zinc alloys 2, 3, 5, 7 and ZA-8; fractional ounce to 8 lbs. In-plant powder coatings. Additional plating processes, production machining, assembly and quality systems. USA made for any industry including transportation, HVAC, fluids, tools, fasteners, window/door, furniture, medical, military, etc.



Quality Certifications: ISO 9001:2015 • ITAR
DUNCAN-PARNELL     Booth # 342
Service Categories: 3D Printing • Rapid Prototyping • Rapid Prototyping - Equipment • Prototypes - Models • Prototypes - Plastic

3D Systems and MarkForged partner for the sale of 3D professional and production printers and scanners in the Mid-Atlantic & Southeast. Offices in NC, SC, GA & VA. Solutions for concept models, functional prototypes, and end-use parts. Rapid prototyping service bureau offering 3D printing, 3D scanning and CAD services.

EDM TECHNOLOGIES INC.     Booth # 241
Service Categories: EDM • EDM - Wire • EDM - Sinker • EDM - Small Hole Drilling

Electrical discharge machining (EDM) shop specializing in Wire EDM, Sinker EDM, Small Hole EDM & precision machining. EDM Technologies is a certified precision tooling source.

Quality Certifications: ISO 9001:2015
ELOMI INC. DBA PIEDMONT MACHINE & MFG.     Booth # 436
Service Categories: Machining - Precision CNC • Machining - Large Parts • Machining - CNC Milling & Turning • Screw Machining - Swiss/CNC Swiss • Stampings - Metal

Specializes in high precision CNC machining with a global resource to produce and supply OEM components. Piedmont specializes in general large diameter CNC machine work including multi-axis CNC turning, CNC Milling, CNC Swiss type screw machining, and precision metal stampings.

Quality Certifications: ISO 9001:2008
EMKA INC.     Booth # 217
Service Categories: Assembly Hardware • Electronic Hardware • Hinges • Shielding - EMI/RFI • Gaskets, Seals, Washers & O-rings

A leading manufacturer of enclosure hardware. Products include handles, hinges, locks, latches, gasketing and accessories.

Quality Certifications: ISO 9001 • ISO 14001 • RoHS • UL APPROVED
EPILOG LASER     Booth # 137
Service Categories: Lasers • Laser Cutting • Laser Engraving • Laser Marking • Bar Coding

An industry leader in design of laser engraving, cutting & marking systems, manufacturers of the Epilog Zing, Mini, Helix, Fusion M2, FiberMark, and G2 Galvo series of laser systems.



Quality Certifications: ANSI STANDARDS • IEC • CE • CFR 21
FALK PRECISION INC.     Booth # 230
Service Categories: Machining • Machining - CNC Milling & Turning • Machining - Precision CNC • Plastics - CNC Machining • Assemblies - Mechanical

We are a contract manufacturer who specializes in tight tolerance and precision parts. Multi-axis machining, horizontal, vertical, palletized, 3-D machining, turning, shearing, grinding/finishing, tooling, assembly, multi-shift operations, CNC bending, TIG/MIG welding, sheet metal fabrication, and quality inspection – DCC CMM.



Quality Certifications: ITAR • AWS D1.1 • AWS D1.2 • AWS D17.1 WELDING
FASTBOLT CORP.     Booth # 201
Service Categories: Fasteners • Electronic Hardware • Gaskets, Seals, Washers & O-rings • Stampings - Metal • Screw Machining

A supply chain integrator of fasteners, hardware, and electronic components for the defense, aerospace, automotive and medical equipment industries. OUR ISO 9001:2000, AS9100D certified, ITAR registered quality standards and systems enable us to understand lean manufacturing, and to support our customers through any specialized V.M.I. programs. DFARS & RoHS compliant.

Quality Certifications: AS 9100D • ISO 9001:2008 • ITAR REGISTERED
FORECAST 3D     Booth # 220
Service Categories: 3D Printing • Rapid Prototyping • Prototypes - Rapid Casting • Castings - Rubber Mold • Tooling - Models & Prototypes

Industrial 3D Printing, Short-Run Manufacturing, & High Volume Production Services for Prototype & Production. Capabilities: HP's Multi Jet Fusion (MJF), Fused Deposition Modeling (FDM), Direct Metal Laser Sintering (DMLS), Stereolithography (SLA), PolyJet, CNC Machining, & RTV Urethane Casting. Customer Focused, Quality Driven since 1994.



Quality Certifications: ITAR REGISTERED • ISO 9001:2015 • AS 9100D
GALLAGHER FLUID SEALS INC.     Booth # 134
Service Categories: Gaskets, Seals, Washers & O-rings • Rubber Molding • Prototypes - Rubber • Extrusions - Rubber

For over 60 years, we have consistently provided superior technical solutions specializing in O-rings, seals, custom PTFE and molded shapes with the lowest total cost of ownership. Creating competitive advantages for our customers in their products or markets is what makes Gallagher "The Seal Specialist". 2nd location: 21 Deer Park Dr., East Longmeadow, MA, Ph: 800-356-0061



Quality Certifications: ISO 9001:2008 • ISO 14001-2004
GATOR STAMPING INTERNATIONAL INC.     Booth # 231
Service Categories: Stampings - Metal • Fabricating - Sheet Metal • Welding & Weldments

Manufacturing of short to medium run metal stampings, sheet metal fabrication, weldments, sub-assemblies, powdercoating & laser capabilities.

Quality Certifications: ISO 9001:2015
GENERAL FOUNDRY SERVICE     Booth # 209
Service Categories: Castings - Aluminum • Castings - Plaster Mold • Castings - Sand & Shell • Castings - Permanent Mold • Castings - Investment

We are the only foundry offering 5 complementary casting processes, in-house patternmaking, machining, surface finishing, and inspection - a true best in class turnkey solution. Thin/thick walled, smooth surface, class A finishes, oz. to 500 lbs., design for manufacturing, breaking design rules with complex parts.



Quality Certifications: ISO 9001:2015 • ITAR REGISTERED
GLOBAL METAL FINISHING     Booth # 331
Service Categories: Metal Finishing - Hard Coating • Metal Finishing - Anodizing • Metal Finishing - Passivating • Metal Finishing - Chromate • Coatings - Teflon

We specialize in the consistent uniform coating of complex parts and have operated an aluminum anodizing facility in the Mid-Atlantic and Southeastern Region since 1987. As a leader in the metal finishing industry our focus is to strengthen your supply chain through communication, quality and solutions.

Quality Certifications: AS 9100 • ISO 9001
GOPROTO INC.     Booth # 306
Service Categories: 3D Printing • Machining • Tooling - Plastic Injection Molding • Tooling - Casting • Prototypes - Models

Delivering turnkey plastic and metal part manufacturing solutions including industrial design model making, rapid prototyping, additive manufacturing, cast urethane, CNC machining, rapid sheet metal, rapid injection tooling, production parts (injection molding, stamping, die-cast, sheet metal), and part finishing to complete your product.



Quality Certifications: ISO 9001
GPC ELECTRONICS     Booth # 105
Service Categories: Assemblies - Electronic • Assemblies - Turnkey • Wire & Cable Harnesses • Surface Mount Technology - Assembly • Assemblies - Printed Circuit Boards

Since our inception in 1985, we've had a track record of working with leading OEMs in North America, Europe, Asia & the Pacific. We are able to customize processes, delivering unique solutions to our customers, providing them with a competitive advantage & positive outcomes. We are a full service EMS and cable harness provider with three manufacturing sites globally.



Quality Certifications: ISO 9001 • ISO 14001 • ISO 13485 • ISO/TS 16949
GREENE RUBBER CO. INC.     Booth # 246
Service Categories: Rubber Fabrication • Rubber Molding • Rubber - Transfer Molding • Silicone / Rubber - Liquid Injection Molding

Custom rubber gaskets & seals. Custom rubber molding, LSR, vibration isolation, rubber-to-metal bonding, Chomerics EMI & Thermal materials, Rogers Poron Urethane Foams, 3M Adhesives, Parker O-Rings, St. Gobain tubing and Panasonic PGS.

Quality Certifications: ISO 9001:2015 • AS9100D
GS INDUSTRIES OF BASSETT LTD     Booth # 215
Service Categories: Plastics - Injection Molding • Fabricating - Plastic • Plastics - Heat Sealing & Welding

An injection molding facility producing custom products for the appliance, furniture, construction, textile, toy & other industries. Our Textube carriers, bobbins & cones are hollow plastic tubes used in textile & carpet industries. Our Underground Products line offers the most complete line of underground duct spacing systems & accessories.

HARMONY CASTINGS LLC     Booth # 122
Service Categories: Castings - Aluminum • Castings - Sand & Shell • Castings - Sand

We are a leader in the production of aluminum castings. We are an ITAR compliant and AS9100 Certified facility. Our V-process delivers tight tolerances, thin walls and excellent surface finish. Further we're able to bring your project from model to production in just three weeks.



Quality Certifications: ISO 9001:2008 • AS 9100 REV D
HARVEY VOGEL MFG. CO.     Booth # 214
Service Categories: Stampings - Metal • Fabricating - Sheet Metal • Assemblies • Prototypes - Rapid Sheet Metal • Welding & Weldments

Complete Metal Service Contractor. Metal Stamping, Fabrication, Machining, In-House Powder Coating & more. Metal Stamping experts for quality fabrication services since 1942. We excel at producing the most difficult stampings and metal fabrications for a wide variety of industries. Our niche is short to medium run quantities of 1,000 pieces to 50,000 pieces annually.

Quality Certifications: ISO 9001:2015 • ISO 14001
HEROLD PRECISION METALS LLC     Booth # 321
Service Categories: Fabricating - Sheet Metal • Assemblies - Electromechanical • Assemblies - Mechanical • Metal Cabinets & Enclosures • Prototypes - Rapid Sheet Metal

Precision Sheet Metal Fabricator with core competencies that include, but are not limited to Design Engineering input up to any level a customer desires, fabrication, finish, and electrical / mechanical assembly up to any level a customer would desire. We offer quick turn prototype, pre-production, and production support up to and including Kanban / JIT programs.

Quality Certifications: ISO 9001:2008 • ITAR • RoHS • UL CERTIFIED
HSM SOLUTIONS     Booth # 325
Service Categories: Fabricating - Steel • Assemblies - Stamped • Powder Metal Parts • Prototypes - Stamping • Wire Forming & Fabricating

Fabrication, Prototype 2 Production / All in house. Low volume production to high volume stamping & weld components. Lasers / Press brake / Progressive and Hand Transfer Presses. Tube Mills / Tube Processing / CNC Bending / Wire Drawing / CNC Wire Benders / Robot and Manual Weld Cells / Powder Coating.

Quality Certifications: ISO 9001:2008
HUGHES SUPPLY CO. INC.     Booth # 438
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Pad Printing • Prototypes - Plastic • Tooling - Plastic Injection Molding

Manufactures high quality injection molded parts for a wide variety of industries and applications. Hughes Supply operates 42 presses ranging from 50 to 750 tons. These parts are manufactured in virtually any plastic compound and in any color. Hughes also provides in-house design and a full staffed tool room for in-house mold production.

HYDRO     Booth # 244
Service Categories: Extrusions - Aluminum • Fabricating - Aluminum Extrusions • Aluminum - Materials • Heat Sinks • Machining - Aluminum

The world’s largest aluminum extrusion company, Hydro is the North American leader in common alloy extruded aluminum products. From raw aluminum to assembled products, we offer the industry’s broadest product capabilities in press sizes and tonnages (direct and indirect extrusion), alloy selection, circle sizes, and profile types.

HYDRO TUBE ENTERPRISES INC.     Booth # 119
Service Categories: Tube Bending & Fabricating • Laser Cutting • Cutting - Tube & Pipe • Welding & Weldments • Powder Coating

We are experts in tube bending & fabrication, providing innovative quality products & services. From robotic welding, to powder coat painting to LASER TUBE CUTTING to 12" diameter, our customers use our many services to get assemblies done well & done right. Ask us about our 5 axis laser. For a quote call Tim @ 919-258-3070.



Quality Certifications: ASTM - SAE • METRIC - JIS • CE AWS • ISO 9001-2000
INDUSTRIAL FABRICATORS INC.     Booth # 437
Service Categories: Fabricating - Sheet Metal • Stampings - Metal • Welding - Robotic • Coatings - Electrostatic Powder • Castings - Ductile Iron

We are one of the largest Suppliers of metal parts and assemblies in the Southeast. We have over 900,000 square feet of facilities and manufacturing space and employ over 500 people. Our equipment and capabilities include fabrication, machining, stamping, welding, ductile and gray iron casting and finishing.

Quality Certifications: ISO 9001:2015
INDUSTRIAL MODERN PATTERN & MOLD     Booth # 333
Service Categories: Rapid Prototyping • Plastics - Injection Molding • Molds & Moldmaking - Plastic • Prototypes - Plastic • Urethanes - Molded/Extruded

IMPM is a service bureau specializing in prototyping, product development, and low volume production. Our competencies include 3D printing (SLA), silicone tooling and cast urethane parts (Home of the 100-shot guarantee), aluminum/p20 injection tooling and injection molding. Let IMPM set the standard.

INSULFAB PLASTICS INC.     Booth # 243
Service Categories: Plastics - CNC Machining • Plastics - Sheet, Rod & Tube • Stampings - Progressive Die • Plastics - Screw Machining • EDM - Wire

Specializing in precision CNC machining, turning & die cutting of thermoplastics, thermosets, composites, films & fibre. Prototypes, Turnkey Assembly. Design & fabrication of specialty assembly and process tooling for the PCB industry including wire EDM.

Quality Certifications: ISO 9001:2008 • ITAR
IST PRECISION     Booth # 444
Service Categories: Engineering & Technical Services • Instrumentation & Controls • Motion Control • CAD Design Services • Sensors

We have been developing complex engineering systems, automation processes, and precision instrumentation since 2001. IST Precision's multidisciplinary engineering team will apply novel solutions to your complex technical challenges. We customize our services to provide our clients with the highest quality engineering value. Stop by our booth to meet our engineers.

I-TECH ESERVICES LLC     Booth # 431
Service Categories: Assemblies - Printed Circuit Boards • Prototypes - Electronic • Assemblies - Cable • Wire & Cable Harnesses • Welding - Sonic

We specialize in high-mix low to mid volume of PCB assembly and wiring harnesses.

Quality Certifications: ITAR • ISO 9001:2008 • IPC-A-610 / J-STD-001 • IPC 620A
JEWETT MACHINE MFG. CO.     Booth # 111
Service Categories: Machining - Precision CNC • Machining - Conventional CNC • Special Machinery - Design, Build & Rebuild • Machining - CNC Milling & Turning • Machining - Castings

Design and manufacture precision machine parts, assemblies, and special automated machinery. Rebuild equipment including updating electrical and mechanical systems.

Quality Certifications: ISO 9001:2008
K.S. OF WEST VIRGINIA CO. LTD.     Booth # 330
Service Categories: Stampings - Metal • Stampings - Deep Drawn Shells • Stampings - High Volume

Performs precision metal stamping, die design and making, hydrocarbon wash & heat treat die and parts at its manufacturing facility in Ravenswood, WV. KSWV is a wholly owned subsidiary of Kato Seisakusho Co., Ltd. of Nagoya, Japan, a world class metal stamping, deep draw, die design and die making company.

Quality Certifications: ISO 9001:2008
K-TEK WISCONSIN / K-TEK CAROLINA     Booth # 107
Service Categories: Stampings - Short Run • Fabricating - Sheet Metal • Assemblies - Electromechanical • Welding - Robotic • Wire Forming & Fabricating

The K-Tek Corporations are world-class manufacturers of metal components for the Major OEM markets. We have presses from 30 to 400 tons. Specializing in short to long run stampings with a variety of globally competitive tooling options. Sheet metal fabrication up to .875" thick. www.ktek-net.com

Quality Certifications: ISO 9001:2008
KUSTERS ZIMA CORPORATION     Booth # 314
Service Categories: Fabricating - Sheet Metal • Fabricating - Stainless Steel • Laser Cutting • Welding & Weldments • Assemblies - Mechanical

Providing superior metal fabrication services for a wide variety of industries. World-class technology & quality reinforce our ability to manufacture & assemble a complete production line or produce one single custom part. For a quote, email David at david.thompson@kusterszima.com

Quality Certifications: ISO 9001
LAKESIDE CASTING SOLUTIONS     Booth # 218
Service Categories: Castings - Die, Zinc • Castings - Zinc • Castings - Die • Tooling - Casting • Castings - Non-Ferrous

Manufacturer of precision Zinc die-castings. Specializing in Four-Slide Tooling Technology. Tight tolerances, thin walls, internal cast threads, secondary machining, assembly, product protective finishes. We have a fully equipped, on-site tool shop, offering complete tool builds, repairs and maintenance. Please submit RFQs to: mhetheriton@lakesidecasting.com.



Quality Certifications: ISO 9001:2015
LONG STANTON MFG.     Booth # 343
Service Categories: Stampings - Metal • Fabricating - Sheet Metal • Fabricating - Steel • Stampings - Progressive Die • Fabricating - Stainless Steel

Long and short run capabilities, precision metal forming, high speed stamping, blanking, piercing, notching, wire cut-off & bending. Computerized presses from 35 to 300 ton. Full service sheet metal fabricating with just in time delivery. Complete in-house tool & die capabilities. Experienced die design & tool room management. Customer assistance in product development.

Quality Certifications: ISO 9001:2008 • DOD REGISTERED
MARION MFG. CO.     Booth # 127
Service Categories: Stampings - Metal • Stampings - Fourslide • Stampings - Progressive Die • EDM - Wire • Machining - Precision CNC

Intricate metal stampings; short to long run, flat springs, terminals, wire forming, progressive eyelets, assemblies, tool and die, low volume custom components to high volume high speed. From design to production.



Quality Certifications: ISO 9001:2015 • IATF 16949:2016
MERCURY CORP.     Booth # 224
Service Categories: Fabricating - Sheet Metal • Metal Cabinets & Enclosures • Assemblies - Turnkey • Fabricating - Aluminum • Fabricating - Stainless Steel

AN INTEGRATED SOLUTION TO YOUR SUPPLY CHAIN - we build custom racks, frames, enclosures, plastics & stamping assemblies. CORE PROCESSES: Design, Metal Fabrication, welding of all types of metals, Plastic Injection Molding, Finishing, Turn-Key Assemblies & KAN BAN.



Quality Certifications: ISO 9001:2008 • ISO 13485 • AS 9100 • ITAR REGISTERED
METALLON INC.     Booth # 309
Service Categories: Stampings - High Volume • Stampings - Progressive Die • Stampings - Ferrous & Non Ferrous • Stampings - Metal

High volume precision stampings. Progressive dies run in presses up to 150 tons. Added value: welding, staking, tapping & assembly. Product design assistance, prototyping.



Quality Certifications: ISO/TS 16949 • ISO 9001 • ISO 14001
METALWORX INC.     Booth # 338
Service Categories: Laser Cutting • Machining - CNC Milling & Turning • Fabricating - Sheet Metal • Welding & Weldments • Machining - Weldments

We offer single source manufacturing solutions providing high quality, customer focused options for customers in the medical, aerospace, military, transportation and other industries. We focus on each of our customer's individual needs and goals and determine how we can help them be successful.

Quality Certifications: ISO 9001:2008 • AS 9100 • MEDACCRED WELDING • ITAR
MID-WEST SPRING & STAMPING     Booth # 239
Service Categories: Springs - Coil • Stampings - Fourslide • Stampings - Metal • Springs - Flat • Stampings - Progressive Die

As a custom job shop, we build exclusively to your print design or specs. We produce Springs & Wire Forms in sizes .007 - .750, and manufacture a wide range of Stampings. We specialize in cost-effective, small and medium-sized runs, and have no minimums. We are proud to practice Lean Manufacturing to serve our broad and diverse customer base.



Quality Certifications: ISO 9001:2015
MINNESOTA RUBBER & PLASTICS     Booth # 235
Service Categories: Rubber Molding • Plastics - Injection Molding • Rubber To Metal Bonding • Rubber - Compression Molding • Silicone / Rubber - Liquid Injection Molding

We are a global technology solutions provider of custom engineered components and assemblies utilizing elastomers, plastics, and other high performance materials for critical applications.



Quality Certifications: QS-9000 • ISO 13485 • ISO 9000 • ISO/TS 16949
NEUMAN ALUMINUM IMPACT EXTRUSION INC.     Booth # 318
Service Categories: Extrusions - Impact • Fabricating - Aluminum • Machining - Aluminum • Assemblies - Mechanical • Forgings - Cold

We are a leading manufacturer of aluminum impact extrusions for many different markets including automotive, defense, and electrical. Benefits include increased strength from cold working, uniform grain structure (no voids), and different wall and bottom thicknesses. We have in-house heat treatment and final CNC machining. We are ISO/TS 16949 & ISO 14001 certified.



Quality Certifications: ISO/TS 16949
NORTHERN PRECISION PRODUCTS     Booth # 212
Service Categories: Screw Machining - Multi Spindle • Screw Machining • Sensors • Machining - Aluminum • Machining - Stainless Steel

Specializes in complex profiles, custom temperature and pressure sensor housings, high pressure fittings, and specialty fasteners. Northern Precision Products' high performance screw machines allow us to offer cost effective large or small runs in stainless steel, brass, steel, and aluminum.

Quality Certifications: IATF 16949 • ISO 9001
PCM PRODUCTS INC.     Booth # 112
Service Categories: Photochemical Etching & Machining • Shielding - EMI/RFI • Chemical Milling

We produce precision, burr/stress free parts, .1" thick down to .0001" thick. In-house plating, forming, heat treating and assembly. Competes with laser cutting and EDM. COMPLIANT TO ISO 9001:2000 & AS9100B & ANSI/ASQ Z1.4-2003.



Quality Certifications: MIL-I-45208
PENCOM     Booth # 301
Service Categories: Fasteners • Machining - CNC Milling & Turning • Screw Machining • Material Handling • Assemblies - Mechanical

Global source for custom and standard fasteners; mechanical components and thermal management solutions. Our motto: Manufacturing Globally – Supplied Locally captures our ability to provide customers with low-cost production advantages and inventory automation capabilities from our twenty-five global facilities.



PENNEX ALUMINUM CO.     Booth # 341
Service Categories: Fabricating - Aluminum Extrusions

We specialize in both standard and custom extrusions in the 6XXX series alloys. We also offer extensive fabrication, machining, and assembly services ranging from cut and punch to fully automated, high volume CNC and robotic work cells. From one part to one million, Pennex Precision Machined Products can supply your extruded, fabricated, finished aluminum part.

Quality Certifications: IATF 16949 • ISO 9001:2015
PERIN INDUSTRIES INC.     Booth # 312
Service Categories: Machining • Machining - CNC Milling & Turning • Machining - Multi Axis • Machining - Precision CNC • Screw Machining - Multi Spindle

A prodigy of a successful 40 year screw machine company located in Central Iowa. Our focus is mid to high complexity work pieces with a wide range of volumes from 500 to 5,000,000. Perin Industries uses the latest in Sub and Multi-Spindle CNC machines to ensure that we can make virtually any part < 2.5" with a single operation. ITAR, AS9100 Rev D, ISO 9001:2015.

Quality Certifications: ITAR • AS 9100 REV D • ISO 9001:2015 • SIX SIGMA
PERMABOND ENGINEERING ADHESIVES     Booth # 223
Service Categories: Adhesives • Gaskets, Seals, Washers & O-rings • Potting & Encapsulation • Surface Treatment • Coatings - Conformal

Quality certified manufacturer of adhesives & sealants. Product lines include anaerobic, cyanoacrylates, epoxy, structural acrylic, UV/visible, modified epoxy, MS polymer and polyurethanes.



Quality Certifications: ISO 9001:2015
PHILLIPS COMMERCIAL     Booth # 419
Service Categories: Machinery Sales & Services - New & Used • Machining - Multi Axis • Machining - CNC Milling & Turning • Engineering & Technical Services

We sell and service high-performance machine tools for both additive & subtractive manufacturing, with top brands like Haas, Toyoda, OMAX and EOS, in a 12 state region. With the Phillips' team approach, you're being served from every angle: Sales, Service, & Applications. One highly coordinated local team devoted to your machines, your business, your goals.

PLASTIC DESIGN INT'L. INC.     Booth # 130
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Tooling - Plastic Injection Molding

We have evolved & expanded our initial core competencies of injection molding into a broad range of products & services, tailored to meet the needs of the changing manufacturing world of today & tomorrow, which include molded components, sub-assemblies & complete products. For inquiries email us at sales@plasticdesign.com.



Quality Certifications: ISO 9001:2015
PRINCE PRECISION PRODUCTS     Booth # 205
Service Categories: Laser Cutting • Waterjet Cutting - Metal • Fabricating - Sheet Metal • Machining • Powder Coating

We are your one-stop shop for all your precision metal component fabrications and CNC machining needs. Our highly trained staff adheres to exacting standards and tolerances. Production Runs only. Prince Precision Products has the equipment to serve you.



Quality Certifications: ISO 9001:2015
PRINCIPAL MANUFACTURING CORP.     Booth # 221
Service Categories: Assemblies - Stamped • Stampings - Fineblanked • Plastics - Insert Injection Molding • Stampings - High Volume • Machining - CNC Milling & Turning

A contract manufacturer offering Precision Metal Stampings (45-400 tons), Fineblanking (100-630 tons), insert molding, grinding, robotic mig welding along with other secondary operations. Serving the aerospace, HVAC, automotive, hand tools, industrial, small engine and other market segments from our IATF and ISO14001 Certified, 161,000 sq. ft. facility.



Quality Certifications: IATF • ISO 14001
RAPID     Booth # 117
Service Categories: Prototypes - Rapid Sheet Metal • Prototypes - Machining • Assemblies - Cable • Machining - CNC Milling & Turning • Fabricating - Sheet Metal

Rapid, a Protolabs Company. Rapid is a quick-turn manufacturer of sheet metal and CNC machined parts. The company provides quotes within 24 hours, and produces parts within days. Since being acquired by Protolabs in December 2017, we’re now able to add 3D printing and injection molding to our services. Visit rapidmanufacturing.com for more information.



Quality Certifications: ISO 9001:2015 • ITAR REGISTERED
ROUSHYATES MFG. SOLUTIONS     Booth # 317
Service Categories: Machining • Assemblies • Machining - Swiss Laser & CNC Swiss • Machining - Aluminum • Machining - Stainless Steel

A precision CNC parts manufacturing organization with expertise in multi-axis machining of metal and plastic parts with complex geometries. We produce machined parts for the automotive, aerospace, military and industrial industries. Our manufacturing and quality management systems are dedicated to exceeding our customer's expectations.

Quality Certifications: AS 9100 ISO 9000 • ITAR • DLA REGISTERED
SEAWAY PLASTICS ENGINEERING LLC     Booth # 250
Service Categories: Plastics - Injection Molding • Prototypes - Plastic • Plastics - Low Volume • Molds & Moldmaking - Plastic • Plastics - Painting

We are a full service plastic injection molding company specializing in prototype injection molding, low to mid volume production and mold making. We are headquartered in the Clearwater Beach/Tampa Bay area and have two manufacturing locations, Port Richey and Brooksville, FL. Employing 160, Seaway strives to provide technology leadership and performance excellence to medical, aerospace, military, packaging, food service, industrial and consumer products.



Quality Certifications: ISO 13485:2016, ISO 9001:2015 • ANSI/ASQ Q9001-2000 • ITAR REGISTERED • NADCAP ACCREDITED
SECTOR ELECTRONICS LLC     Booth # 232
Service Categories: Power Supplies & Batteries • Assemblies - Printed Circuit Boards • Wire & Cable Harnesses • Mechanical & Electronic Design • Motors & Drives

A full service electronic, component, mechanical engineering and manufacturing services provider. Offering a wide range of services including design, prototyping & production of PCB Assemblies, cabinetry, metal, and machining fabrication. Full turnkey solutions from concept to prototypes to final design and sourcing.

Quality Certifications: GMP • FDA REGISTERED • ISO 13485, ITAR, AS9100
SMD - SURFACE MOUNT DEPOT     Booth # 350
Service Categories: Assemblies - Printed Circuit Boards • Electronics - New Product Development • Prototypes - Electromechanical • Prototypes - Electronic • Assemblies - Turnkey

We manufacture printed circuit board assemblies for a number of industries, including, oil and gas, aerospace and defense, construction, industrial controls, and many more. SMD is also ITAR compliant for military and defense applications.

Quality Certifications: ISO 9001 • ITAR
SOLAR ATMOSPHERES     Booth # 104
Service Categories: Heat Treating • Heat Treating - Vacuum Carburizing LPVC • Brazing - Vacuum Furnace • Cryogenic Treatment

We offer high quality Vacuum Heat Treating services producing bright, scale-free parts with minimal distortion. Markets served include aerospace, medical, power generation, firearms & ordnance, and more. Our state-of-the-art vacuum furnaces range from lab sized to 48’. Four plants located in Souderton, PA, Hermitage, PA, Greenville, SC, and Fontana, CA.



Quality Certifications: NADCAP • ITAR • ISO 9001:2015 • AS 9100D
SOUTHERN SPRING & STAMPING INC.     Booth # 102
Service Categories: Springs - Coil • Stampings - Metal • Laser Cutting • Wire Forming & Fabricating • Fabricating - Sheet Metal

Custom Compression, Extension & Torsion Springs. Wire Forms, Stampings, Fourslide parts, Progressive Die, In-House Tool & Die, Precision Sheet Metal Fab, Fiberoptic Laser Cutting & Machining. Grinding, Shot-peening, Powder Coating, Painting & Silk Screen Printing. Prototypes to production. Second mfg. location Stokesdale, NC 336-548-3520. Visit our website for a free quote.

Quality Certifications: ISO 9001 • ITAR REGISTERED • BELL HELICOPTER APPROVED
STEWART EFI LLC     Booth # 207
Service Categories: Stampings - Deep Drawn Shells • Stampings - Progressive Die • Stampings - Fourslide

A mfgr. of medium-to-high volume precision progressive die stampings; deep-drawn, slide-formed components; wire forms; & multi-component assemblies. In-house design & tool building, reel-to-reel stampings, transfer press & secondary tapping, welding, staking, screw insertion, value-added plating, heat treating, & secondary processes. Facilities located in CT & TX.



Quality Certifications: ISO/TS 16942:2009 • ISO 9001:2008
STOCK DRIVE PRODUCTS/STERLING INSTRUMENT     Booth # 329
Service Categories: Timing Pulleys & Belts • Gears • Gearboxes • Machining - Precision CNC • Screw Machining - Swiss/CNC Swiss

We make high-quality, high-precision small mechanical components and assemblies for critical motion control applications. Whether you need custom design and manufacturing to meet your requirements or a standard catalog item we can meet your needs. Standard components available include timing belts, pulleys, precision gears, bearings, couplings and many more.



Quality Certifications: ISO 9001 • AS9100 • Boeing BQMS Certified
SWOOSH TECHNOLOGIES     Booth # 136
Service Categories: CAD/CAM Software • Software For Job Shops & Manufacturers • CAD/CAM Training • Measurement - Software • 3D Printing

Partnered with manufacturing leaders - including Siemens PLM, Mentor Graphics, and Markforged, we deliver the best CAD/CAM/CAE and product data management solutions for your company and take an active role in the investments you make. Whether it’s engineering software, PLM training, or services, our engineers can help you tackle the most critical challenges.



TEAM INDUSTRIES INC.     Booth # 420
Service Categories: Assemblies - Mechanical • Machining - Precision CNC • Castings - Die, Aluminum • Gears

A design and manufacturing organization that can take your power train idea from concept to prototype to pilot to production. TEAM Industries also specializes in contract manufacturing of gears, shafts, and cases. We have 6 facilities in Minnesota, North Carolina, and Mexico employing over 1200 people.

Quality Certifications: IATF 16949:2016
TEC GRAPHICS INC.     Booth # 340
Service Categories: Screen Printing • Labels, Tapes & Decals • Nameplates, Dials & Panels • Panels - Control • Die-Cutting

Since 1992, we have always delivered the highest quality Screen & Digital Printed Graphics. Servicing both the Advertising and Manufacturing Industries, from POP products to close tolerance overlays and decals with the latest problem-solving technologies and printing techniques. We are the future of printing!

Quality Certifications: ISO 9001:2015
TECTON INDUSTRIES INC.     Booth # 439
Service Categories: Machining - CNC Milling & Turning • Machining - Multi Axis • Grinding - Precision • Automation • 3D Printing

We enjoy the challenge of complex parts that others have failed to create. Tecton Industries is a leader in producing high quality, tight tolerance components from round stock, shaped stock, cast and forged materials serving a wide range of industries for our customers around the globe. In additional, Tecton offers precision grinding, lights-out automation & 3D printing.

Quality Certifications: ISO 9001:2015 CERTIFIED • PPAP LEVEL 1,2,3,4,5
TEMPCO MFG. CO. INC.     Booth # 249
Service Categories: Stampings - Metal • Fabricating - Sheet Metal • Assemblies - Mechanical • Welding & Weldments • Tools, Dies & Fixtures

With over 70 years of experience, Tempco produces precision metal stampings, precision sheet metal fabrications and mechanical assemblies for clients across numerous industries. Tempco offers a complete tool & die room to go along with secondary services to be your one stop shop for metal stampings and sheet metal fabrications.



Quality Certifications: AS9100D • ISO 9001:2015
THE RUBBER GROUP     Booth # 211
Service Categories: Rubber Molding • Die-Cutting • Rubber To Metal Bonding • Rubber - Injection Molding • Rubber - Transfer Molding

Twenty-five years of experience manufacturing custom and standard rubber products. Injection, transfer and compression molding from a variety of different materials including medical grade silicone, fluorosilicone, FKM, Neoprene, EPDM, HNBR, NBR and natural rubber.



Quality Certifications: ISO 9001:2015 • MIL-I-45208, MIL-I-9858 • FDA • ITAR
TPI-ARCADE INC.     Booth # 242
Service Categories: Castings - Aluminum • Castings - Sand & Shell • Castings - Sand

The most advanced Aluminum V-Process casting facility in the US. Twice as accurate and smooth as common sand castings, .125" wall thickness, 0° draft and unlimited pattern life are a few advantages. We pride ourselves on speed to market with samples in 2-3 weeks. Let us be your prototype and production foundry.

Quality Certifications: AS9100C • ITAR REGISTERED
TPM     Booth # 426
Service Categories: CAD/CAM Software • 3D Printing • Rapid Prototyping • Rapid Prototyping - Equipment • CAD/CAM Training

A leading technology company headquartered in Greenville, South Carolina. TPM provides additive manufacturing solutions from HP and MarkForged as well as design tools from SOLIDWORKS and Autodesk to customers throughout the Southeast.

TRIMECH     Booth # 237
Service Categories: CAD/CAM Software • CAD/CAM Training • Rapid Prototyping • Software For Job Shops & Manufacturers

Partners with Solidworks Corporation to provide sales, training & support of Solidworks 3D CAD, Engineering, Simulation & Automation, Enterprise PDM & Technical Publications software. Trimech also offers 3D printers for rapid prototype development in addition to a compliment of CAM products & engineering project services solutions.

TRIRX MEDICAL     Booth # 334
Service Categories: Machining - Miniature Precision • Machining - Microwave • Screw Machining - Swiss/CNC Swiss • EDM - Wire • Laser Marking

A contract manufacturer for the medical device industry, microwave wave guides, aerospace smaller parts, and military applications. CNC swiss up to 8 axis, high speed machining centers, CNC turning. High precision and fussy parts. All materials including implant grades, titanium, stainless, bar stock and small castings.

Quality Certifications: ISO 13485:2016
TUTHILL PLASTICS GROUP     Booth # 307
Service Categories: Plastics - Injection Molding • Plastics - Insert Injection Molding • Plastics - Elastomeric Overmolding • Plastic Coatings - EMI/RFI • Plastics - Heat Sealing & Welding

A leading manufacturer of precision injection molded plastic components and mechanical assemblies, we have the technical expertise and manufacturing capability to take your project from concept to production, on-time, in-spec, and on budget. We utilize lean manufacturing principles to deliver extreme value and we strive to exceed expectations on every program we support.

Quality Certifications: ISO 9001:2015 • ACNOR CSA W.47 • UL RECOGNIZED • ITAR REGISTERED
USA DUTCH INC.     Booth # 302
Service Categories: Fabricating - Sheet Metal • Machining - CNC Milling & Turning • Laser Cutting • Welding & Weldments • Assemblies - Mechanical

We provide full sheetmetal fabrication and CNC machining services. We offer up-to-date technology, outstanding performance, and most of all a burning desire to help you succeed. It is our intention to take care of you - to make your life easy when it comes to metal parts.

Quality Certifications: ISO REGISTERED
VAGA INDUSTRIES     Booth # 203
Service Categories: Photochemical Etching & Machining • Chemical Milling • Fabricating - Stainless Steel • Prototypes - Fabrication • Springs - Flat

We specialize in precision Photo Chemical Machining parts of all types of metals, prototype & production. Thicknesses range from .0002" to .065". In-house CAD. Forming, heat treating & plating. Woman owned, AS9100D and ISO 9001:2008 registered. Contact us at sales@vaga.com.

Quality Certifications: AS 9100D • ISO 9001 • MIL-I-45208
WEPCO PLASTICS INC.     Booth # 110
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Prototypes - Plastic • Plastics - Elastomeric Overmolding • Plastics - Insert Injection Molding

We are a family owned full-service mold making and plastic injection molding company offering American made parts. We specialize in rapid prototype onsite tooling and short to medium run plastic injection molding with 4 axis machining, fixturing, and secondaries.



WRICO     Booth # 133
Service Categories: Stampings - Metal • Stampings - Short Run • Welding - Robotic • Fabricating - Sheet Metal • Assemblies - Stamped

Custom short-medium run stampings, fabrications and mechanical assemblies. Presses 20-400 ton - lasers - turrets, EDMs, robotic welding cells. EDI, JIT, Kanban, SPC, CAD/CAM systems. Low cost lifetime tooling - 6 plants strategically located throughout the country.

Quality Certifications: ISO 9001:2008
XCENTRIC MOLD & ENGINEERING     Booth # 319
Service Categories: Plastics - Injection Molding • Machining - Precision CNC • Plastics - Low Volume • Molds & Moldmaking - Plastic • Plastics - Insert Injection Molding

Specializing in Quick-Turn, Low-Volume Plastic Injection Molding and CNC Machined Parts. High Quality, Custom parts delivered in 1-15 days.



Quality Certifications: ISO 9001:2015 CERTIFIED • UL LISTED • ITAR
XOMETRY     Booth # 441
Service Categories: 3D Printing • Machining • Molds & Moldmaking - Plastic • Rapid Prototyping • Machining - CNC Milling & Turning

We are transforming custom manufacturing through a proprietary software platform which offers on-demand manufacturing to a diverse customer base, ranging from startups to Fortune 100 companies. Xometry provides designers & engineers the most efficient way to source high-quality custom parts, with 24/7 access to instant pricing, lead times and manufacturability feedback.

Quality Certifications: ISO 9001 • AS 9100 • ITAR • NADCAP
ZEISS INDUSTRIAL METROLOGY     Booth # 213
Service Categories: Measurement & Inspection • Measurement - Equipment • Measurement - Software

We are the world's leader in CNC coordinate measuring machines (CMMs) & complete solutions for multidimensional metrology in the metrology lab & production.





© 2017 The Job Shop Company • 16 Waterbury Road, Prospect, CT 06712 • (800) 225-4535