Southeast Design-2-Part Show
March 27 & 28, 2019
Cobb Galleria Centre • Atlanta, GA

Search by Category


Search by Keywords

  Reset Search  

0 Exhibitors to Meet

Exhibitor List

Listed below are the current exhibitors and service categories of companies in the show.
This page is also an interactive tool for you to use when planning your personal visit.

[ 162 ] companies match your search.
FEATURED EXHIBITORS listed first alphabetically
ACRO INDUSTRIES INC.     Booth # 316
Service Categories: Fabricating - Sheet Metal • Assemblies - Honeycomb • Laminating • Stampings - Metal • Stampings - Progressive Die

Offers expertise in full service Contract Manufacturing, Product Design, Engineering, Supply Chain Management, System/Module Assemblies, Production Stamping, Laser & Short Run Fabrication and Custom Laminate Panel Fabrications.

Quality Certifications: ISO 9001:2015 REGISTERED • ITAR
ADRON TOOL CORP.     Booth # 103
Service Categories: EDM • EDM - Wire • EDM - Sinker • EDM - Small Hole Drilling • Machining - Production

Wire EDM specialists with over 55 CNC Wire EDM machines , CNC (sinker) std. EDM; largest capacity, 40"x32"x18", workpiece weight up to 10,000 lbs., 26-1/2" thick; metal parts rapid prototyping service and production runs of complex, contoured shapes in tough to machine or exotic material; CNC production machining, coord. measuring sys., SPC, OGP optical non-contact measuring.

Quality Certifications: ISO 9001:2008 • AS 9100 • NADCAP AS7116
Service Categories: Gaskets, Seals, Washers & O-rings • Rubber Molding • Rubber To Metal Bonding • Silicone / Rubber - Liquid Injection Molding • Prototypes - Rubber

Manufacturer of elastomeric parts. O-Rings; MicrOrings to MacrOrings, AS568 & ISO 3601 (search inventory from our Website). We design & manufacture custom, rubber bonded to plastic, metal & filter materials, and medical rubber parts. Our services include engineering, design assistance & QC testing & reporting, from prototype to Production. Class 7 (10,000) clean room.

Quality Certifications: ISO 9001 • AS 9100
ASH INDUSTRIES     Booth # 114
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Plastics - Rotational Molding • Plastics - Hot Stamping & Screening • Prototypes - Plastic

Engineered for You. In-House MIM, Thermoplastic, and Silicone Injection & Rotational Molding & Tooling as well as cast epoxy components & 7-Axis Swiss Lathe production. Molding includes custom inserts & over-molding, two shot molding. Component assembly, secondary processing & decorating, utilizing the latest in CNC, EDM & Modeling technology.

Quality Certifications: ISO 9001 • ISO 7 CLASS 10K CLEAN ROOM
ATLAS PRECISION INC.     Booth # 343
Service Categories: Plastics - Injection Molding • Plastics - Insert Injection Molding • Plastics - Low Volume • Molds & Moldmaking - Plastic • Tooling - Plastic Injection Molding

Since 1979, Atlas Precision Plastics has been committed to providing high-quality, cost-effective, plastic injection molding products to our customers in a timely manner with some of the most advanced technology. Atlas Precision is a full-service plastic injection molding company specializing in the Design / Build / Run for molds and parts.

Quality Certifications: ISO 9001:2015
BOHN AND DAWSON     Booth # 419
Service Categories: Tube Bending & Fabricating • Welding - Robotic • Racks • Tubular Parts - Die Swaged

A High Volume Metal Tubing Fabricator, providing parts and welded assemblies for OEM Manufacturers in the Outdoor Power, Agricultural, Automotive, Furniture and Off Road Recreational Vehicle Market.

Quality Certifications: ISO 9001:2015
Service Categories: Electronic Enclosures • Fabricating - Aluminum • Stampings - Deep Drawn Shells • Fabricating - Plastic • Fabricating - Sheet Metal

Offers a complete lineup of off the shelf instrumentation enclosures, available in either metal or plastic. What sets Buckeye Shapeform apart from its competitors is the level of technical support, customization and value added services we provide in-house.

Quality Certifications: ISO 9001 • AS 9100 / ISO 9001 • ITAR • # 97-112 CERT
Service Categories: Plastics - Thermoforming/Vacuum Forming • Plastics - Pressure Forming • Extrusions - Plastic • Plastics - Extruded Profiles • Plastics - Thermoplastic Extrusion

C&K Plastics and Valley Extrusions are sister plastic companies. Since 1963 C&K has specialized in cut sheet vacuum, pressure and twin sheet forming, also providing CNC machining and contract manufacturing. Since 2001 Valley has specialized in custom plastic extrusions with co-extrusions & tri-extrusions, large parts, complex hollows & tubing capabilities produced in most thermoplastics. Our three facilities have a combined 450,000 sq.ft. giving us the capacity to meet even the largest requirements. Valley Extrusions - PA, C&K - NJ, and C&K Georgia - GA.

Quality Certifications: ISO 9001:2008
C&J INDUSTRIES     Booth # 338
Service Categories: Plastics - Injection Molding • Tooling - Plastic Injection Molding • Molds & Moldmaking - Plastic • Assemblies • Prototypes - Plastic

We are your single source for plastic injection molding and contract manufacturing. With 55 presses and state-of-the-art 3D additive manufacturing machines, C&J has the leading-edge technology to reduce customers' time to market. Combined with our in-house tool shop and unique 10-Year warranty, C&J can rapidly develop prototypes into commercial reality.

Quality Certifications: UL CERTIFIED • ISO 9001:2015 • ISO 13485:2016 • FDA REGISTERED
CR METAL PRODUCTS     Booth # 214
Service Categories: Fabricating - Sheet Metal • Powder Coating • Laser Cutting • Welding - Robotic • Screen Printing

A custom metal fabrication facility/contract manufacturer specializing in precision sheet metal fabrication, powder coated finishes, & silkscreening.

Quality Certifications: ISO 9001:2008
Service Categories: Extrusions - Aluminum • Fabricating - Aluminum Extrusions • Machining - Precision CNC • Heat Sinks

Manufacturers of aluminum extrusions. 7", 8" & 10" circle size. Single Source. Precision CNC, fabrication, welding, bending, anodize, paint, powder coat & assembly. Excellent lead-times, design assistance & inventory programs available.

Quality Certifications: ISO 9001-2015
DAYTON ROGERS MFG. CO.     Booth # 249
Service Categories: Stampings - Metal • Fabricating - Sheet Metal • Assemblies - Stamped • Stampings - Short Run • Rapid Prototyping

For 90+ years, we have been providing metalforming solutions to industry. Modular tooling/progressive metal stamping, metal fabrication, welded assemblies, prototypes, drawn shapes, complete tool & die facility. All secondary operations. Seven locations to serve you. Building on Experience... Unequaled Craftsmanship... Stamping and Forming an Impact Now & into the future.

Quality Certifications: ISO 9001:2008 • AS 9100 • ITAR
DB ROBERTS     Booth # 102
Service Categories: Fasteners • Electronic Hardware • Assembly Hardware • Levers, Knobs & Handles • Masking

Since our inception, we have been focused on providing solutions for fastener applications in Sheet Metal Fabrication, Metalworking, and Industrial Electronics. Our "Superior Customer Service" and "Commitment to Excellence" have proven to be a winning formula fueling innovation and rapid growth year after year.

Quality Certifications: ISO 9001:2015 • AS 9120B
DESIGN-2-PART MEDIA     Booth # 000
Service Categories: Publications

Published since 1984, Design-2-Part Magazine is one of the country's oldest publications specifically devoted to showcasing manufacturing companies who specialize in helping OEM's take their product from design to part.

DYNAMIC TUBE INC.     Booth # 430
Service Categories: Tube Bending & Fabricating • Hydraulics & Pneumatics • Fluid Power • Cutting - Tube & Pipe • Welding & Weldments

A leading supplier of fabricated tubing, hydraulic power and supply lines, diesel fuel lines and a variety of specialty tube and pipe assemblies. Dynamic Tube Inc. produces prototype, production and after-market parts for a variety of Industries including: Heavy Construction OEMs, Agricultural Equipment OEMs, Marine, Gas and Diesel Engine manufacturers, etc.

Quality Certifications: ISO 9001
Service Categories: Springs - Coil • Springs - Flat • Wire Forming & Fabricating • Stampings - Fourslide • Stampings - Short Run

Manufacturer of custom springs, wire forms and metal forms. We utilize SPC systems, CNC coilers and experienced craftsmen to assure consistent quality. Design assistance and rush orders are welcome. Wisconsin Grand Manufacturer of the Year. We Quality Certify each process & provide a total Value-added supplier package. 10 piece minimum for custom spring and wire forms.

Quality Certifications: ISO 9001:2015 • ITAR REGISTERED
Service Categories: Fabricating - Sheet Metal • Machining - CNC Milling & Turning • Laser Cutting • Welding - Robotic • Assemblies - Mechanical

We are a 53-year-old company specializing in Metal Fabrication, CNC Machining, Welding & Powder Coat Painting. We are ISO 9001 certified.

Quality Certifications: ISO 9001:2015 CERTIFIED
Service Categories: Shot Peening • Testing - Non-Destructive • Surface Finishing • Deburring - Tumble & Vibratory • Metal Finishing - Tumble & Vibratory Polishing

FAA Repair Station G89R878X & EASA Repair Station # EASA.145.6643 (Georgia) & KJIR272K & EASA Repair Station # EASA.145.4559 (Connecticut). Major customer approvals: Boeing, Lockheed, Gulfstream, Pratt & Whitney, GE Aviation, GE Power Systems, Honeywell & Sikorsky.

Quality Certifications: AC7004 • NADCAP: MPI, FPI
PROTIQ USA     Booth # 414
Service Categories: 3D Printing • Prototypes - Plastic • Tooling - Models & Prototypes • Rapid Prototyping • Heating Elements - Custom

Online Direct, Industrial Grade 3D Printing Service provider for plastic and metal materials. We utilize high quality, industrial printing technologies including SLS, DMLS, SLA and Polyjet/MultiJet. Our broad range of 3D printed Polymer/Plastic and Metal materials include both standard and proprietary options including: PA 6X, High Conductive RS Copper, Brass and more.

Quality Certifications: ISO 9001 • ISO 14001 • BSOHSAS: 18001:2007
Service Categories: Fabricating - Sheet Metal • Laser Cutting • Prototypes - Fabrication • Welding - Robotic • Powder Coating

A third generation, family owned business providing customer metal fabrication solutions for over 40 years, & is a company built on integrity & hard work. Sargent Metal Fabricators is based in Anderson, SC where we call a 21-acre campus with an 80,000 sq. ft. mfg. facility home. Our mission is to be the supplier of choice providing fabricated-metal-products, by utilizing a Balanced Value System of Quality, Delivery, Price, and Responsiveness.

Quality Certifications: AWS Welding • ISO 9001:2015 CERTIFIED • PPAP's • LEAN SIX SIGMA
SMALLEY     Booth # 133
Service Categories: Snap Rings & Retaining Rings • Springs - Coil • Springs - Wave • Springs - Flat • Fasteners

We are the exclusive manufacturer of the industry-leading Spirolox® Retaining Rings, an innovative design that features a no gap, 360° retaining surface without protruding ears to interfere with mating components. We are also the originator of Crest to Crest® Wave Springs which save up to 50% of space compared to conventional coil springs.

Quality Certifications: ISO 9001 & ISO 13485 • IATF 16949 • AS 9100 • ISO 14001
Service Categories: Springs - Coil • Wire Forming & Fabricating • Rapid Prototyping

As a Part Of Your Product and A Partner In Your Success, Spiros helps from the onset with design assistance through production. We are a high-quality precision custom spring manufacturer serving a variety of industries worldwide. For over 28 years a key ingredient to our continued success has been the flexibility necessary to keep pace with evolving technology and quality demands.

Quality Certifications: IATF 16949:2016 • ISO 9001:2015 • ISO 13485:2016
TUTCO     Booth # 204
Service Categories: Heating Elements - Custom • Heating Elements - Electric • Heaters - Custom • Assemblies - Electrical • Fans & Blowers

The world's largest supplier of open coil heating elements. We produce 35,000 to 38,000 heaters a day to meet the demands of our OEM customers. Leading the world in heating innovation, Tutco holds 80% of the U.S. Patents in open coil heating technology. Tutco heating components can be found in countless commercial applications, including refrigeration, HVAC, appliance, lab equipment and vending. We can quickly bring your project from concept to completion.

Quality Certifications: ISO 9001:2008 • ISO 14001:2004 • OHSAS 18001:2007
U.S. MACHINE & TOOL     Booth # 432
Service Categories: Stampings - Metal • Fabricating - Sheet Metal • Laser Cutting • Waterjet Cutting - Metal • Welding - Robotic

Established in 1985, we are a world class supplier of Metal Stamping, Metal Fabrication, and Robotic Welded Sub-Assemblies. U.S. Machine & Tool's Tyrone campus encompasses 2 buildings, totaling over 70,000 sq. ft. of manufacturing space. We offer 30+ stamping presses up to 400 tons. We also offer a full-service tool room as well as a Laser/Waterjet, and fabrication department.

Quality Certifications: ISO 9001:2015
Service Categories: Gaskets, Seals, Washers & O-rings • Shielding - EMI/RFI • Fabricating - Felt, Cork & Rubber • Rubber Fabrication • Urethanes - Molded/Extruded

Manufacturer, Assembly and Distribution of sealing solutions, including Gaskets, Seals, O-rings, EMI/RFI Shielding and Thermal Management products. USR provides sealing solutions to Aerospace, Defense, Electronics, Medical, OEM, Power Generation, Recreation, Space and Transportation Industries. USR specializes in inventory management systems and program management.

US METAL CRAFTERS     Booth # 403
Service Categories: Laser Cutting • Roll Forming • Stampings - Metal • Assemblies - Mechanical • Tools, Dies & Fixtures

Offers the complete solutions of Metal Stamping, Roll Forming, Fabrication, Laser Cutting and Assembly Services. US Metal Crafters has secondary operations: drilling/tapping, & ream/countersink. Roll forming services include custom roll forming. Fabrication services include but are not limited to spot, electric welding, MIG, & TIG, press brake forming, & tube bending.

Quality Certifications: INDUSTRIAL ISO 9001:2008
4B PLASTICS     Booth # 427
Service Categories: Plastics - CNC Machining • Gaskets, Seals, Washers & O-rings • Fabricating - Plastic • Plastics - Compression/Transfer Molding • Bellows

A 3rd generation PTFE (Teflon) machining and manufacturing site. Since 1977 4B Plastics has developed a client list of approximately 2600 petrochemical plants and/or supply vendor companies including valve shops and support organizations across the US. We compression mold our billets and machine parts from 1/4" to 42" in diameter.

A.S.A.P. TECHNOLOGIES INC.     Booth # 417
Service Categories: Adhesives • Labels, Tapes & Decals • Coatings • Potting & Encapsulation • Silicone / Rubber - Liquid Injection Molding

A leading distributor of sealants, RTV silicones, adhesive, tapes and abrasive products for the aerospace and aircraft industries, as well as electronics and industrial manufacturing, including MilSpec. Value added capabilities include custom tape slitting, heat-shrink tubing, cutting and material kitting. ISO9001 & AS9120 Certified. Experienced staff, 90 years combined!

Quality Certifications: ISO 9001:2015 CERTIFIED • AS 9120B • MIL-STD • CAGE CODE
ABATEK (AMERICAS) INC.     Booth # 226
Service Categories: Rubber - Compression Molding • Tooling • Assemblies - Electromechanical • Gaskets, Seals, Washers & O-rings • Switches - Membrane

Specializing in Human Machine Interfaces (HMI), Abatek is a global leader for Automotive, Medical, Industrial & Communications Industries with roots in silicone rubber keypads, connectors, & sub assemblies. Global sales, local engineering & logistics, and wholly-owned manufacturing sets us apart. Contact Ken Marbert at 678-684-5412 or

Quality Certifications: ISO 9001 • IATF 16949
ACCESS MFG. SYSTEMS     Booth # 424
Service Categories: 3D Printing • CAD/CAM Software • Software For Job Shops & Manufacturers • CAD/CAM Training

RIZE One 3D Printer One-touch experience for pre and post processing. No chemicals, glue; zero toxic omissions or venting. Perfect for prototyping, tooling, molds and end of use parts. Medical/engineering grade material CAMWorks integrates within SolidWorks and powers the new SolidWorks CAM for seamless CNC programming.

Service Categories: 3D Printing • Machining - CNC Milling & Turning • Tooling - Rapid Injection Molding • Prototypes - Rapid Sheet Metal • Rubber - Compression Molding

Established in 2009, we offer metal & plastic 3D Printing, and traditional manufacturing. ITAR & ISO 9001 services include: SLA, CNC, SLS, FDM, DMLS, Polyjet, Urethane & Metal Castings, Laser Cutting, Production Tooling & Molding. We have over 20 years of additive and traditional manufacturing experience, and provide outstanding customer service.

Quality Certifications: ITAR • ISO 9001
Service Categories: Machining • Fabricating - Aluminum • Machining - Tube Piercing & Tubing • Assembly Hardware • Metal Finishing - Plating

We are a U.S. manufacturer of complex custom components for OEMs in the aerospace, defense, medical, and other technology sectors. We provide precision machining, sheetmetal and assembly of small tubular cannulars and probes. In-house plating, painting, hardware insertion and silk screen including numerous others. ITAR, AS9100, ISO and NADCAP in Chemical Processing.

Quality Certifications: ISO 9001:2015 • AS 9100 REV D • ITAR REGISTERED • NADCAP: CHEMICAL PROCESSING
AGE NAMEPLATE     Booth # 330
Service Categories: Switches - Membrane • Nameplates, Dials & Panels • Gaskets, Seals, Washers & O-rings • Labels, Tapes & Decals • Rubber - Injection Molding

We manufacture custom membrane switches, graphic overlays, 3D dome labels, die-cut gaskets, labels, elastomer keypads and more! For over 40 years we've served our markets with unparalleled customer service, technical support and stability.

Quality Certifications: ISO 9001:2015
Service Categories: Cleaners - Air • Filters • Fans & Blowers • Safety Products & Components • Testing - Environmental

Single source supplier for all your air filtration needs including all types of replacement Air Filters. Air cleaners, bag houses, cyclones, downdraft tables, dust collectors, dust control booths, fans & blowers, flexible duct, fume extraction arms, mist and smoke collectors, odor collection, ducting systems, vehicle exhaust solutions, wet scrubbers and fume booths. On-site eng. & a highly trained staff serve your most challenging indoor air quality needs.

ALINABAL INC.     Booth # 335
Service Categories: Stampings - Metal • Assemblies - Electromechanical • Stampings - High Volume • Stampings - Shims • Stampings - Short Run

Providing an extensive span of manufacturing and assemblies capabilities to a wide range of OEM markets including medical, commercial, aerospace, industrial and automotive. Our products range from stampings, shims, laminations and assemblies just to name a few.

Quality Certifications: AS 9100 • ISO 9001:2008 • ISO-TS16969
Service Categories: Gaskets, Seals, Washers & O-rings • Die-Cutting - Felt, Cork & Rubber • Fabricating - Foil, Films & Foams • Die-Cutting • Waterjet Cutting - Non-Metal

Employee Owned, Custom Fabricator of Flexible materials: foam, rubber, sponge, thin gauge plastics, EMI/RFI, and pressure sensitive adhesives. Services: rotary die cutting/flatbed die cutting, kiss cutting, DIGITAL CUTTING, laser cutting, water jet cutting, slit to width, laminating films, fabric & PSA. Rogers Corporation Preferred Converter. 3M Select Converter.

Quality Certifications: ISO 9001:2015 • SPC
Service Categories: Machining - CNC Milling & Turning • Machining - Large Parts • Machining - Precision CNC • Tools, Dies & Fixtures • EDM - Wire

Our CNC Fabrication Division has well over 100 years of collective manufacturing experience. This experience is put to work with new top-of-the-line technology to offer services and capabilities above that of our competitors. AMT's Mazak CNC Department boasts a range of new equipment, capable of producing parts with general locational tolerances at +/- 0.003".

Quality Certifications: ISO 9001:2015
Service Categories: Electronics - New Product Development • Assemblies - Electronic • Wire & Cable Harnesses • Assemblies - Printed Circuit Boards • Embedded Devices

Design and manufacture industrial electronic control systems including printed circuit board assemblies and wire harnesses.

Quality Certifications: ISO 9001:2015
ARC-TRONICS INC.     Booth # 218
Service Categories: Assemblies - Electronic • Assemblies - Electromechanical • Assemblies - Printed Circuit Boards • Assemblies - Turnkey • Prototypes - Electronic

We are a full-service Electronic Manufacturing Services (EMS) provider for turnkey products in printed circuit board assembly, cable/harness assembly, and complete box build or higher level integration. The company is ISO 9001:2015, ISO 13485:2016, and AS910:2016 certified. Arc-Tronics is also an ITAR registered company.

Quality Certifications: ISO 9001:2015 • AS 9100:2016 • ITAR • ISO 13485:2016
ARKANSAS BOLT CO. INC.     Booth # 406
Service Categories: Assembly Hardware • Fasteners

A national wholesale distributor of quality fasteners and specialty products. Started in 1962, from the owner's search for a special type of fastener, ABC evolved into a well-respected firm servicing mid to large sized manufacturers across the nation. Our mission is to provide a combination of quality products, at competitive prices, and in a time frame that fits you, our customer! Outstanding service will always be the key ingredient to our success!

Quality Certifications: ISO 9001:2015 CERTIFIED
ASCO SINTERING CO.     Booth # 339
Service Categories: Powder Metal Parts • Gears • Valves & Controls • Assemblies • Copper - Materials

A contract manufacturer of Powder Metallurgy components offering highly engineered solutions since 1964. We offer new product development and/or cost reduction of existing parts. Materials at near full density and all MPIF materials. High temperature sintering and in-house tool design. Complete to print; serving all markets and automotive. Kanban/JIT ISO 9001:2015 Certified.

Quality Certifications: ANSI/ISO/ASQ 9001:2015 • ISO 9001:2015
Service Categories: Fasteners • Slides • Assembly Hardware • Levers, Knobs & Handles • Abrasives

Distributor of fasteners, latches, access and motion hardware specializing in PEM, Southco, Accuride, Panduit, Heyco, Sugatsune, Dodge, POP and many more. Ask us about our Vendor Managed Program, Kitting & special packaging. RoHS Compliant.

Quality Certifications: ISO 9001:2008
Service Categories: Machining • Machining - Production • Machining - Precision CNC • Machining - Aluminum • Plastics - CNC Machining

Production machining of metals and plastics. Primary materials are aluminum, mild steel, stainless steel, and brass. Equipment utilized includes CNC milling, CNC turning, and single spindle screw machining to a diameter of 2.0". Parts are typically small weighing less than 3 lbs. with quantities being from 100 pieces to 25,000 pieces.

BACKER MARATHON INC.     Booth # 314
Service Categories: Heating Elements - Electric • Sensors • Plastics - Injection Molding • Tubular Parts - Die Swaged • Extrusions - Plastic

Founded in 1996, we are the premier manufacturer of electric heating elements and sensors in the U.S. Backer Marathon specializes in manufacturing custom heating elements for OEMs as well as direct-fit replacements for popular brands. Backer Marathon, Inc. is a member of the Backer North America group of companies.

Quality Certifications: ISO 9001:2015 • ISO 14001:2015 • CUL/UL RECOGNIZED • CAGE CODE
BARE BOARD GROUP     Booth # 113
Service Categories: Fabricating - Printed Circuit Boards • Printed Circuit Boards - Aluminum Clad • Circuits - Flexible • Prototypes - Fabrication • Prototypes - Electronic

Prototype through production, BBG is dedicated to providing quality PCB's built domestically & offshore. Rigid, Rigid Flex, Flex & Metal Clad PCB's. ITAR Registered (Domestic & Offshore), Military and Aerospace production. Specializing in RF; Medical; LED Lighting, Automotive and ITAR applications. BBG is also WEE, UL and RoHS Compliant and a Minority Business Enterprise.

Quality Certifications: ITAR • ISO 9001:2008 • TS 16949 • ISO 14001
Service Categories: Castings - Permanent Mold • Castings - Aluminum • Castings - Zinc

Aluminum & zinc castings, engineering assistance, in-house tooling, machining & assembly. Castings from a few ounces to 80 lbs. Quantities from 500 to 150,000.

Quality Certifications: ISO 9001:2008
BEGOUN INC.     Booth # 225
Service Categories: Screw Machining - Swiss/CNC Swiss • Stampings - Metal • Stampings - Fourslide • Springs - Coil • Cold Heading - Cold Forming

Utilizing over 30 manufacturing partners, with hundreds of fabricating capabilities, we are able to provide you with virtually all of your outsourced, custom metal & plastic fabricated requirements. We also have the facilities to stock your parts in our warehouse & ship them as needed.

Service Categories: Fasteners • Cold Heading - Cold Forming • Assembly Hardware

Your one-stop cost effective partner dedicated to quality & on-time delivery. BCEPI specializes in custom engineered products from cold-formed to assembled components. Over 34 years of experience handling challenging projects allows us to support every step from product engineering to flexible release scheduling.

Quality Certifications: ISO 9001:2015 REGISTERED
BLUE RIDGE MOLDING     Booth # 421
Service Categories: Plastics - Injection Molding • Plastics - Insert Injection Molding • Plastics - Hot Stamping & Screening • Welding - Sonic • Plastics - Heat Sealing & Welding

We are a subsidiary of von Drehle Corp. located in Hickory, NC. Blue Ridge features all-electric Toshiba injection machines ranging from 140 to 720 ton clamping pressure. All machines equipped with robots and Toshiba's iPaqet monitoring system. Other services include sonic welding, color matching, program management and customer stocking programs.

Quality Certifications: ISO 9001:2015 WITH DESIGN
Service Categories: Aluminum - Materials • Extrusions - Aluminum • Fabricating - Aluminum Extrusions • Machining - Aluminum • Metal Finishing - Anodizing

A custom fabricated and finished aluminum extrusion company with two additional product lines consisting of TSLOTS and commercial flooring. We are recognized for providing superior quality fabricated aluminum extrusions along with exceptional customer service. Our highly trained employees are committed to provide value to customers for their custom aluminum extrusions, specialty fabrication or direct job-shop anodizing requirements. Our facilities are located in Newnan, GA; Carthage, TN; Niles, MI; Elkhart, IN; and Clearfield, UT.

Quality Certifications: ISO 9001:2015 • ISO 14001:2015 • ISO/TS 16949:2016
Service Categories: Plastics - Injection Molding • Tooling - Plastic Injection Molding • Engineering & Technical Services • Die-Cutting

Plastic Injection Molding, Die Cutting & Rubber Molding.

Quality Certifications: ISO 9001:2008
Service Categories: Switches - Membrane • Labels, Tapes & Decals • Screen Printing • Nameplates, Dials & Panels • Prototypes - Electronic

For over 25 years Butler Technologies has been providing screen/digitally printed Membrane Switches, Overlays & Labels. Additional products and processes include printed electronic components, dials & gauges, rubber keypads & laser cutting service. Please ask about our Rapid Prototype Program.

Quality Certifications: ISO 9001 • UL APPROVED • ITAR • CSA APPROVED
C2G - A BRAND OF LEGRAND     Booth # 308
Service Categories: Cable & Wire Manufacturing • Assemblies - Cable • Cables - Mechanical • Fiber Optic Tooling & Components • Rapid Prototyping

We provide solutions and services to original equipment manufacturers in industries such as medical/healthcare, contract manufacturing, gaming, hospitality, and industrial—ranging from regionally-based organizations to multi-national companies. Whether you need a modified stock cable alteration, or a custom engineered application, you can count on C2G.

Quality Certifications: ISO 9001:2015
CAPITAL CITY TOOL INC.     Booth # 323
Service Categories: Machining - CNC Milling & Turning • Grinding - Centerless • Machining - Multi Axis • Machining - Castings

We are a Production Machining facility with CNC Turning/Milling, Centerless Grinding, and many secondary service capabilities. CCT has warehouse capabilities to accomplish JIT shipping & we are one of Central KY's largest and fastest growing production machine shops. We produce quality machined products at competitive prices. Our satisfied customers are located world-wide and include many diverse industries.

Quality Certifications: ISO 9001:2015
Service Categories: Extrusions - Aluminum • Metal Finishing - Anodizing • Fabricating - Aluminum Extrusions • Powder Coating

Custom aluminum extrusions; brite dip, color & architectural hard coat anodizing & powder coating, complete fabricating capabilities.

Service Categories: Stampings - Deep Drawn Shells • Stampings - Short Run • Stampings - Metal • Stampings - Ferrous & Non Ferrous • EDM

Deep drawing specialist in a wide range of metals based on customers' supplied drawings. All required tooling is built and tested on site. We supply small to medium production runs to the high voltage power & X-ray tube manufacturers; as well as components for aerospace and other industries.

Quality Certifications: AS 9100D • ISO 9001:2015 • ITAR REGISTERED
Service Categories: Metal Finishing - Painting • Plastics - Painting • Shielding - EMI/RFI • Powder Coating • Pad Printing

Contract production painting (Metal/Plastics) - Powder, Liquid, CARC, Teflon, and EMI/RFI Shielding. Chemical pre-treatment including RoHS Chromate, Blasting, Pad Printing, Silk-Screening, Mask Making, High-Bake capability and Blister Packaging.

Quality Certifications: ISO 9001:2015 • CONTROL PLANS • FEMA • FLOW CHARTS - SPC
Service Categories: EDM - Sinker • EDM - Wire • Machining - CNC Milling & Turning • Machining - Precision CNC • Screw Machining - Swiss/CNC Swiss

We are your engineering-driven, technology-based production machining partner. Crescent Industries concentrates on CNC milling, Die Sink EDM, Wire EDM and Swiss Screw machining applications. The benefits of working with us include a dedicated program management office, palletizing capabilities to save set-up time and Quick Response Manufacturing (QRM) to help cut lead times.

Quality Certifications: ITAR REGISTERED • ISO 13485:2016 • FDA REGISTERED • REACH, FFL
CRI MACHINING INC.     Booth # 402
Service Categories: Machining - CNC Milling & Turning • EDM - Wire • Laser Cutting • Machining - Precision CNC • Gears

We are a precision full-service machine shop specializing in multi-axis machining and offering fabrication, heat treat, waterjet and laser cutting capabilities. We make prototype parts through OEM production. Large part capabilities, fast turnaround and engineering support are always available. We continuously provide high quality parts and outstanding customer service.

Quality Certifications: ISO 9001:2015
CW THOMAS      Booth # 239
Service Categories: Plastics - Thermoforming/Vacuum Forming • Plastics - Pressure Forming • Plastics - Low Volume • Prototypes - Plastic • Plastic Cabinets & Enclosures

For over 70 Years CW Thomas has been producing highly engineered plastic parts and assemblies, delivered when needed to our customers, and at fair and reasonable prices. We have an established reputation as an industry leader in expanding the viability of the thermoforming processes of Vacuum and Pressure forming.

Quality Certifications: ISO 9001:2008 • AS 9100C
DA/PRO RUBBER INC.     Booth # 116
Service Categories: Rubber Molding • Plastics - Injection Molding • Silicone / Rubber - Liquid Injection Molding • Rubber To Metal Bonding • Rubber - Compression Molding

5 facilities for compression/injection molding - high-quality custom rubber, TPE, & plastic components molded to precision tolerances such as diaphragms, seals, connectors, molded shapes, rubber to metal parts for medical device, electronic & aerospace industries. Class 10,000 cleanroom - chemists & engineers assist in optimal moldability.

Quality Certifications: ISO 9001
DAEMAR INC.     Booth # 340
Service Categories: Gaskets, Seals, Washers & O-rings • Bearings • Snap Rings & Retaining Rings • Bearings - Linear Motion • Bushings

We serve the industrial marketplace with innovative, high-quality, competitively priced precision components & fluid sealing products. Product lines include DMR inch & metric shaft seals, DMR dryslide bearings, retaining rings, hose clamps, Caplugs® protective closures, bushings, shim stock, keystock, O-rings & JM Clipper products.

Quality Certifications: ISO 9001:2008
Service Categories: Machining • Machining - Precision CNC • Machining - CNC Milling & Turning • Machining - Multi Axis • Machining - Production

We offer substantial custom manufacturing capacity for clients in need of precision machined parts for their own products and services. We offer tremendous manufacturing expertise, technology and capacity in this regard and serve as a professional manufacturing department for our clients.

Quality Certifications: ISO 9001:2008
DPM CNC SOLUTIONS INC.      Booth # 216
Service Categories: Machining - CNC Milling & Turning • Machining - Production • Machining - Robotic • Machining • Machining - Aluminum

We specialize in CNC Machining of Parts, fixtures and some molds. We help Design companies convert their ideas and models into actual working parts. Our Mechanical engineering knowledge helps assist our customers by suggesting changes to make their parts more cost effective. Our Quality, On-Time Delivery and Quick Turnarounds make us different from other machine shops.

Quality Certifications: ISO 9001:2015
Service Categories: EDM • EDM - Wire • EDM - Sinker • EDM - Small Hole Drilling

Electrical discharge machining (EDM) shop specializing in Wire EDM, Sinker EDM, Small Hole EDM & precision machining. EDM Technologies is a certified precision tooling source.

Quality Certifications: ISO 9001:2015
ELESA USA CORP.     Booth # 243
Service Categories: Levers, Knobs & Handles • Fasteners • Fluid Power • Packaging

Designs & manufactures plastic thermal engineered products according to the ISO 9001 standard. Product consists of Elesa designed families of product including operating elements, clamping elements, clamping levers, plastic handles, control elements, indexing elements, machine elements, leveling elements, hinges, latches and accessories for hydraulic systems.

Quality Certifications: ISO 9001 • ISO 14000
EPILOG LASER     Booth # 202
Service Categories: Lasers • Laser Cutting • Laser Engraving • Laser Marking • Bar Coding

An industry leader in design of laser engraving, cutting & marking systems, manufacturers of the Epilog Zing, Mini, Helix, Fusion Pro, FiberMark, and G2 Galvo series of laser systems.

Quality Certifications: ANSI STANDARDS • IEC • CE • CFR 21
Service Categories: Machining - Precision CNC • Machining - Stainless Steel • EDM - Wire • Welding - MIG • Plastics - CNC Machining

Family Owned CNC Machine Shop, located in Loganville, GA. Specializing in high precision CNC milling (vertical and horizontal), turning, and wire EDM. Providing customer engineered components made from a wide variety of materials. We offer quality & competitive secondary finishes including anodizing, nickel plating, powder coating, zinc, and rubber covering.

EVANS     Booth # 101
Service Categories: Stampings - Deep Drawn Shells • Eyelets & Drawn Shells • Stampings - Metal

Conventional multi-station transfer presses. Custom designed progressive type presses. Thin-walled drawn metal shells, tubular parts and precision metal stampings.

Quality Certifications: ISO 9001:2015
F.D. HURKA CO.     Booth # 305
Service Categories: Measurement - Equipment • Measurement & Inspection

Sale of Precision Measuring Equipment & Calibration Services.

Quality Certifications: A2LA ACCREDITED
FLEX-TEC INC.     Booth # 429
Service Categories: Wire & Cable Harnesses

Contract manufacturer of Electrical Wire Harnessing and over molding.

Quality Certifications: IPC • UL & CSA • HUB
Service Categories: Assemblies - Printed Circuit Boards • Consulting - Manufacturing • Testing - Printed Circuit Boards • Surface Mount Technology - Assembly • Assemblies - Electronic

Our Electronic Manufacturing Services group is committed to exceeding your expectations through continuous improvement. There are many phases in the world of EMS including design, prototyping, production PCB assembly, test and complete box builds. Futaba supports all these areas as well as a wide range of technology and volume mixes.

Quality Certifications: IPC-A-610E • ISO 9001:2015 • IATF 16949:2016
Service Categories: Gaskets, Seals, Washers & O-rings • Rubber Molding • Prototypes - Rubber • Extrusions - Rubber

For over 60 years, we have consistently provided superior technical solutions specializing in O-rings, seals, custom PTFE and molded shapes with the lowest total cost of ownership. Creating competitive advantages for our customers in their products or markets is what makes Gallagher "The Seal Specialist". 2nd location: 21 Deer Park Dr., East Longmeadow, MA, Ph: 800-356-0061

Quality Certifications: ISO 9001:2008 • ISO 14001-2004
GASKOA     Booth # 436
Service Categories: Gaskets, Seals, Washers & O-rings • Die-Cutting - Felt, Cork & Rubber • Prototypes - Rubber • Stampings - Shims • Laser Cutting

Manufacturer of Gaskets, Shims, Washers, and Sealing Products. Industries served are lighting, compressor, valves, tank car and aerospace.

Quality Certifications: ISO 9001:2008
GASSER & SONS INC.     Booth # 131
Service Categories: Stampings - Deep Drawn Shells • Machining - CNC Milling & Turning • Stampings - Metal • Stampings - Progressive Die • Machining - Precision CNC

Since 1916 Gasser continues to Provide: Precision Deep Drawn Components, Secondary Machining, A Vast Tooling Library, Custom Formed Lead Lining for Housings and Assemblies, Design Engineering Services, Production Quantity Runs and Quality...with Confidence.

Quality Certifications: ISO 9001 • ITAR REGISTERED
Service Categories: Stampings - Metal • Fabricating - Sheet Metal • Welding & Weldments

Manufacturing of short to medium run metal stampings, sheet metal fabrication, weldments, sub-assemblies, powdercoating & laser capabilities.

Quality Certifications: ISO 9001:2015
GIC LTD.     Booth # 237
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Electronic • Assemblies - Electromechanical • Assemblies - Turnkey • Mechanical & Electronic Design

Specializing in Turnkey Contract Electronic Manufacturing that includes: Electronic Assembly-Mixed-SMT-BGA-Micro-BGA; Electro-Mechanical Box Build; Electronic Circuit Design; Firmware Development; Mechanical Design; Full Functional & In-Circuit Testing; Chip Programming; Encapsulation/Conformal Coating.

Quality Certifications: ISO 9001:2008 • ISO 13485:2003 Medical • ANSI/ESD 20.20 • UL, CSA, CE & ITAR
GOPROTO INC.     Booth # 320
Service Categories: 3D Printing • Machining • Tooling - Plastic Injection Molding • Tooling - Casting • Prototypes - Models

Delivering turnkey plastic and metal part manufacturing solutions including industrial design model making, rapid prototyping, additive manufacturing, cast urethane, CNC machining, rapid sheet metal, rapid injection tooling, production parts (injection molding, stamping, die-cast, sheet metal), and part finishing to complete your product.

Quality Certifications: ISO 9001
GPC ELECTRONICS     Booth # 124
Service Categories: Assemblies - Electronic • Assemblies - Turnkey • Wire & Cable Harnesses • Surface Mount Technology - Assembly • Assemblies - Printed Circuit Boards

Since our inception in 1985, we've had a track record of working with leading OEMs in North America, Europe, Asia & the Pacific. We are able to customize processes, delivering unique solutions to our customers, providing them with a competitive advantage & positive outcomes. We are a full service EMS and cable harness provider with four manufacturing sites globally.

Quality Certifications: ISO 9001:2015 • ISO 14001:2015 • ISO 13485:2016 • IATF 16949:2016
GREENE RUBBER CO. INC.     Booth # 140
Service Categories: Rubber Fabrication • Rubber Molding • Rubber - Transfer Molding • Silicone / Rubber - Liquid Injection Molding

Custom rubber gaskets & seals. Custom rubber molding, LSR, vibration isolation, rubber-to-metal bonding, Chomerics EMI & Thermal materials, Rogers Poron Urethane Foams, 3M Adhesives, Parker O-Rings, St. Gobain tubing and Panasonic PGS.

Quality Certifications: ISO 9001:2015 • AS9100D
GRENZEBACH     Booth # 311
Service Categories: Assemblies - Turnkey • Laser Cutting • Machining • Material Handling • Weld Fixture

We are a contract manufacturer specializing in full machine builds per customer IP. We offer Machining, Welding, Fabrication, Laser Cutting, Assembly and Paint services. We have engineering staff for design support and many years of experience building material handling equipment.

Quality Certifications: ISO 9001-2015 • ISO 14001:2015 • OHSAS 18001:2007 • 5S
Service Categories: Plastics - Injection Molding • Fabricating - Plastic • Plastics - Heat Sealing & Welding

An injection molding facility producing custom products for the appliance, furniture, construction, textile, toy & other industries. Our Textube carriers, bobbins & cones are hollow plastic tubes used in textile & carpet industries. Our Underground Products line offers the most complete line of underground duct spacing systems & accessories.

Service Categories: Nameplates, Dials & Panels • Screen Printing • Switches - Membrane • Assemblies - Electronic • Labels, Tapes & Decals

US manufacturer of nameplates, overlays, membrane switches and a provider of electronic manufacturing services. Hallmark is a small veteran owned company, ISO9001:2015, ISO 13485:2016 and ITAR Registered. Hallmark is also UL and CSA Recognized on many substrates and adhesives.

Quality Certifications: ISO 9001:2015 • ISO 13485:2016 • ITAR • UL, CSA
HARBOR CASTINGS     Booth # 219
Service Categories: Castings - Investment • Castings - Non-Ferrous

A ferrous and non-ferrous investment castings company. Offering services to a diverse group of customers. Our customers include working with the aerospace industry, military, defense, transportation, air and hand tools, oil field, medical, valve and pump, door hardware, gun and food industries – to name a few.

Quality Certifications: ISO 9001:2015 • AS 9100D
Service Categories: Fabricating - Sheet Metal • Assemblies - Electromechanical • Assemblies - Mechanical • Metal Cabinets & Enclosures • Prototypes - Rapid Sheet Metal

Precision Sheet Metal Fabricator with core competencies that include, but are not limited to Design Engineering input up to any level a customer desires, fabrication, finish, and electrical / mechanical assembly up to any level a customer would desire. We offer quick turn prototype, pre-production, and production support up to and including Kanban / JIT programs.

Quality Certifications: ISO 9001:2008 • ITAR • RoHS • UL CERTIFIED
HTF     Booth # 130
Service Categories: Fasteners • Electronic Hardware • Threaded Parts • Grommets • Assembly Hardware

Authorized stocking distributor for 60 leading fastener & component lines. Products include PEM, Southco, circuit board hardware & accessories, threaded inserts for plastics, cable components, adhesives & tapes, commercial & military hardware, installation tools, grommets, grommet edging, gaskets, extrusions, seals trim, fiber management, cable sleeving and wraps.

Quality Certifications: ISO 9001:2000 • MIL-I-45208A
Service Categories: Extrusions - Aluminum • Fabricating - Aluminum Extrusions • Aluminum - Materials • Heat Sinks • Machining - Aluminum

The world’s largest aluminum extrusion company, Hydro is the North American leader in common alloy extruded aluminum products. From raw aluminum to assembled products, we offer the industry’s broadest product capabilities in press sizes and tonnages (direct and indirect extrusion), alloy selection, circle sizes, and profile types.

Service Categories: Tube Bending & Fabricating • Laser Cutting • Cutting - Tube & Pipe • Welding & Weldments • Powder Coating

We are experts in tube bending & fabrication, providing innovative quality products & services. From robotic welding, to powder coat painting to LASER TUBE CUTTING to 12" diameter, our customers use our many services to get assemblies done well & done right. Ask us about our 5 axis laser. For a quote call Tim @ 919-258-3070.

Quality Certifications: ASTM - SAE • METRIC - JIS • CE AWS • ISO 9001-2000
Service Categories: Bearings • Bearings - Linear Motion • Bearings - Needle Roller • Motion Control

A world-renowned producer of quality needle bearings, linear motion rolling guides, precision positioning tables and machine components. Only IKO offers C-Lube technology which provides long-term, maintenance-free lubrication and is available in M-series linear ways and maintenance-free cam followers. IKO products are highly regarded in the worldwide marketplace, living up to the inspiration for our name: Innovation, Know How & Originality.

IMSM     Booth # 446
Service Categories: Consulting - Manufacturing • Quality Systems • Certification Services • Educational Services

We assist businesses around the world to achieve International Standards (ISO) 9001, 14001, 17025, 22000, 27001, AS9100, 45001 & meet other regulations such as GDPR and R2. We provide fixed fee, low risk, world-class consultation. IMSM is a member of the ASQ & the European Foundation for Quality Management (EFQM).

INDTOOL     Booth # 437
Service Categories: Machining - CNC Milling & Turning • Machining - Precision CNC • EDM - Wire • Grinding • Gears

We provide both manual and CNC production services in a variety of metals and plastics with a focus on quality every single step of the way. Our highly skilled machinists are well trained and supported by a fully stocked tool crib. We accept all standard CAD formats, prototypes ranging in quantity from a single piece up to hundreds of units with sizes ranging up to 26"diam. turning and 35" x 60" milling. We have the capability to use a variety of materials including stainless and carbon steel, tool steels, aluminum, titanium and plastic.

Quality Certifications: ISO 9001:2015
Service Categories: Fabricating - Sheet Metal • Stampings - Metal • Welding - Robotic • Coatings - Electrostatic Powder • Castings - Ductile Iron

We are one of the largest Suppliers of metal parts and assemblies in the Southeast. We have over 900,000 square feet of facilities and manufacturing space and employ over 500 people. Our equipment and capabilities include fabrication, machining, stamping, welding, ductile and gray iron casting and finishing.

Quality Certifications: ISO 9001:2015
Service Categories: Publications

Industrial Machinery Digest (IMD) is the Industry’s Most Extensive Industrial Publication since 1986. IMD is a monthly publication that serves the owners and managers of America's most diversified job shops, contract manufacturers and production line manufacturing.

Service Categories: Plastics - CNC Machining • Plastics - Sheet, Rod & Tube • Stampings - Progressive Die • Plastics - Screw Machining • EDM - Wire

Specializing in precision CNC machining, turning & die cutting of thermoplastics, thermosets, composites, films & fibre. Prototypes, Turnkey Assembly. Design & fabrication of specialty assembly and process tooling for the PCB industry including wire EDM.

Quality Certifications: ISO 9001:2008 • ITAR
Service Categories: Stampings - Metal

Specializes in short to medium lot production of metal stampings and light fabrications utilizing cost effective tooling strategies and flexible ship schedules. Industries served are power generation and distribution, medical, aerospace, advertising, recreational hardware and signage. ISO 9001:2015 certified.

Quality Certifications: ISO 9001:2015
Service Categories: Screw Machining - Swiss/CNC Swiss • Screw Machining - Escomatics • Machining - Miniature Precision

Precision machined components to 1.125" diameter. Complete secondary including: thread rolling, knurling, milling, tapping, drilling and slotting. For a Quote, email David at

Quality Certifications: ISO 9001:2015
IST PRECISION     Booth # 344
Service Categories: Engineering & Technical Services • Instrumentation & Controls • Motion Control • CAD Design Services • Sensors

We have been developing complex engineering systems, automation processes, and precision instrumentation since 2001. IST Precision's multidisciplinary engineering team will apply novel solutions to your complex technical challenges. We customize our services to provide our clients with the highest quality engineering value. Stop by our booth to meet our engineers.

I-TECH ESERVICES LLC     Booth # 441
Service Categories: Assemblies - Printed Circuit Boards • Prototypes - Electronic • Assemblies - Cable • Wire & Cable Harnesses • Welding - Sonic

We specialize in high-mix low to mid volume of PCB assembly and wiring harnesses.

Quality Certifications: ITAR • ISO9100D, ISO13485 • IPC-A-610 / J-STD-001 • IPC 620A
JEWETT MACHINE MFG. CO.     Booth # 135
Service Categories: Machining - Precision CNC • Machining - Conventional CNC • Special Machinery - Design, Build & Rebuild • Machining - CNC Milling & Turning • Machining - Castings

Design and manufacture precision machine parts, assemblies, and special automated machinery. Rebuild equipment including updating electrical and mechanical systems.

Quality Certifications: ISO 9001:2008
Service Categories: 3D Printing • EDM • Grinding • Turning - Stainless Steel • Machining - CNC Milling & Turning

We are a distributor of high-end machine tools in the Southeast.

KORMACHINE     Booth # 303
Service Categories: Machining - CNC Milling & Turning • Machining - Precision CNC • Machining - Stainless Steel • Machining - Multi Axis • Machining - Castings

Prototypes and production manufactures complex machine milled and turned parts and assemblies for our clients principally in the Aerospace, Aircraft, Oil and Gas, Food and Beverage, Railroad, Construction, Defense, and Consumer Products Industries.

Quality Certifications: AS 9100D, ISO 9001:2015 • JCP • CAGE CODE • ITAR
Service Categories: Stampings - Short Run • Fabricating - Sheet Metal • Assemblies - Electromechanical • Welding - Robotic • Wire Forming & Fabricating

The K-Tek Corporations are world-class manufacturers of metal components for the Major OEM markets. We have presses from 30 to 400 tons. Specializing in short to long run stampings with a variety of globally competitive tooling options. Sheet metal fabrication up to .875" thick. 4000 Watt Laser with FMS System 6000 & 8000 Watt Fiber Optic Lasers FMS.

Quality Certifications: ISO 9001
Service Categories: Castings - Die, Zinc • Castings - Zinc • Castings - Die • Tooling - Casting • Castings - Non-Ferrous

Manufacturer of precision Zinc die-castings. Specializing in Four-Slide Tooling Technology. Tight tolerances, thin walls, internal cast threads, secondary machining, assembly, product protective finishes. We have a fully equipped, on-site tool shop, offering complete tool builds, repairs and maintenance. Please submit RFQs to:

Quality Certifications: ISO 9001:2015
LEE SPRING     Booth # 221
Service Categories: Springs - Coil • Springs - Flat • Springs - Wave • Stampings - Fourslide

Springs in stock ready to ship or made to your specifications. Large selection of stock Compression, Extension, Torsion, HEFTY™ Die, REDUX™ Wave, LeeP™ Plastic Composite, MIL-SPEC, Belleville Washer, Battery and Constant Force Springs. Custom Springs, Stampings, Wire Forms and Fourslide design and manufacturing. Prototypes through large production runs.

Quality Certifications: ISO 9001 • RoHS / REACH • MIL SPEC AS24585 • MIL SPEC AS24586
MARION MFG. CO.     Booth # 213
Service Categories: Stampings - Metal • Stampings - Fourslide • Stampings - Progressive Die • EDM - Wire • Machining - Precision CNC

Intricate metal stampings; short to long run, flat springs, terminals, wire forming, progressive eyelets, assemblies, tool and die, low volume custom components to high volume high speed. From design to production.

Quality Certifications: ISO 9001:2015 • IATF 16949:2016
MARKING SYSTEMS INC.     Booth # 230
Service Categories: Die-Cutting • Labels, Tapes & Decals • Laser Cutting • Adhesives • Fabricating - Foil, Films & Foams

MSI and MSDC serve all types of OEM companies in industries ranging from test and measurement, telecommunications, military, consumer electronics, medical and security to name a few.

Quality Certifications: ITAR • AS 9100D • ISO 9001:2015 • CSA & UL APPROVED
MERCURY CORP.     Booth # 222
Service Categories: Fabricating - Sheet Metal • Metal Cabinets & Enclosures • Assemblies - Turnkey • Fabricating - Aluminum • Fabricating - Stainless Steel

AN INTEGRATED SOLUTION TO YOUR SUPPLY CHAIN - we build custom racks, frames, enclosures, plastics & stamping assemblies. CORE PROCESSES: Design, Metal Fabrication, welding of all types of metals, Plastic Injection Molding, Finishing, Turn-Key Assemblies & KAN BAN.

Quality Certifications: ISO 9001:2008 • ISO 13485 • AS 9100 • ITAR REGISTERED
Service Categories: Bearings • Materials - Metal & Non-Metal • Industrial Equipment • Assembly Hardware

Supplying engineered carbon graphite and graphite solutions for severe service lubrication to industrial customers worldwide since 1945. Under the trade name Metcar®, our unique family of solid, oil-free, self-lubricating materials have been under continuous development for over seventy years.

Quality Certifications: ISO 9001-2015
METALLON INC.     Booth # 208
Service Categories: Stampings - Metal • Stampings - High Volume • Stampings - Progressive Die • Stampings - Ferrous & Non Ferrous • Assemblies - Stamped

High volume precision stampings. Progressive dies run in presses up to 150 tons. Added value: welding, staking, tapping & assembly. Product design assistance, prototyping.

Quality Certifications: IATF 16949 • ISO 9001 • ISO 14001
MINOR RUBBER CO. INC.     Booth # 112
Service Categories: Rubber Molding • Rubber - Injection Molding • Extrusions - Rubber • Rubber - Compression Molding • Rubber - Transfer Molding

Custom molders, extruders and dip molders of rubber products. Also extensive line of standard catalog items, such as grommets, bumpers, extruded profiles, isolators, bellows, etc. Most items are searchable online at

Quality Certifications: MIL-I-45208A
MLC CAD SYSTEMS     Booth # 201
Service Categories: CAD/CAM Software • 3D Printing • CAD/CAM Training • Reverse Engineering • Finite Element Analysis - FEA

We are a Value-Added-Reseller offering real-world, hands-on expertise in implementing the full suite of MASTERCAM and SOLIDWORKS software products, and 3D Systems and Markforged 3D printing technologies. In addition, MLC CAD Systems provides MASTERCAM and SOLIDWORKS training and support, and 3D printer support and repair, and installation services.

Service Categories: Fasteners • Assembly Hardware • Cold Heading - Cold Forming • Threaded Parts

Independently owned distributor of standard and custom fasteners. OEM was founded in 1969. We have built our reputation on providing common and specialty fasteners along with custom components and installation tooling. Markets served include automotive, appliance, industrial and medical. OEM is a factory authorized repair center for Stanley POP and Atlas tools.

Quality Certifications: ISO 9001:2015
ONDRIVES.US CORP.     Booth # 240
Service Categories: Gearboxes • Gears • Couplings - Misalignment • Machining - CNC Milling & Turning • Machining - Precision CNC

We are a leading manufacturer and distributor of precision mechanical components and assemblies. With extensive knowledge and experience in mechanical component design and application, our engineering team is committed to creating quality solutions that will exceed your expectations at competitive prices. Our manufacturing facility will ensure parts are made to your specifications.

Quality Certifications: ISO 9001:2015 • ITAR REGISTERED
Service Categories: Extrusions - Plastic • Plastics - Sheet, Rod & Tube • Materials - Plastic • Plastics - Extruded Profiles • Plastics - Thermoplastic Extrusion

We are a leading global supplier of advanced tubing solutions for the medical device and industrial markets. Fluoropolymer and thermoplastic polymer extrusions include anti-static, spiral cut, striped, and fabricated tubes, as well as IV catheter tubing, braided shafts, heat shrink tubing, etched OD PTFE liners, multi-lumen tubing, balloon & stent protectors.

Quality Certifications: ISO 9001 & ISO 13485 • ISO 14001 • RoHS / REACH • NSF51
ORB DESIGN & MFG. INC.     Booth # 227
Service Categories: Cable & Wire Manufacturing • Wire & Cable Harnesses • Assemblies - Electrical • Assemblies - Mechanical • Cases - Custom

Custom cable assemblies and wiring harnesses. Control Panel fabrication. Custom Electrical and Mechanical Assembly services. Custom Case and Foam Fabrication. Laser Engraving, Waterjet cutting, and Turnkey Services. Build to print. Low to medium quantity, one piece prototyping available.

Quality Certifications: ISO 9001 • IPC/WHMA-A-620B • MIL-I-45208A
PARTSBADGER     Booth # 415
Service Categories: Machining - CNC Milling & Turning • EDM • Castings - Investment • Grinding • 3D Printing

We offer a revolutionary change to the way people and businesses source their custom parts. PartsBadger is an online machine shop offering custom CNC parts for entrepreneurs, engineers, product designers, manufacturers, and makers. Instant 24/7 quotes and our aggressively low pricing removes the barriers to innovation.

Quality Certifications: ISO 9001-2015 • AS 9100 REV D CERTIFIED • ITAR
PCM PRODUCTS INC.     Booth # 108
Service Categories: Photochemical Etching & Machining • Shielding - EMI/RFI • Chemical Milling

We produce precision, burr/stress free parts, .1" thick down to .0001" thick. In-house plating, forming, heat treating and assembly. Competes with laser cutting and EDM. COMPLIANT TO ISO 9001:2000 & AS9100B & ANSI/ASQ Z1.4-2003.

Quality Certifications: MIL-I-45208
PENCOM     Booth # 301
Service Categories: Fasteners • Machining - CNC Milling & Turning • Screw Machining • Material Handling • Assemblies - Mechanical

Global source for custom and standard fasteners; mechanical components and thermal management solutions. Our motto: Manufacturing Globally – Supplied Locally captures our ability to provide customers with low-cost production advantages and inventory automation capabilities from our twenty-five global facilities.

Service Categories: Machining • Machining - CNC Milling & Turning • Machining - Multi Axis • Machining - Precision CNC • Screw Machining - Multi Spindle

A prodigy of a successful 40 year screw machine company located in Central Iowa. Our focus is mid to high complexity work pieces with a wide range of volumes from 500 to 5,000,000. Perin Industries uses the latest in Sub and Multi-Spindle CNC machines to ensure that we can make virtually any part < 2.5" with a single operation. ITAR, AS9100 Rev D, ISO 9001:2015.

Quality Certifications: ITAR • AS 9100 REV D • ISO 9001:2015 • SIX SIGMA
Service Categories: Adhesives • Gaskets, Seals, Washers & O-rings • Potting & Encapsulation • Surface Treatment • Coatings - Conformal

Quality certified manufacturer of adhesives & sealants. Product lines include anaerobic, cyanoacrylate, epoxy, structural acrylic, UV/visible, modified epoxy, MS polymer and polyurethane.

Quality Certifications: ISO 9001:2015
Service Categories: Machinery Sales & Services - New & Used • Machining - Multi Axis • Machining - CNC Milling & Turning • Engineering & Technical Services

We sell and service high-performance machine tools for both additive & subtractive manufacturing, with industry leaders being EOS, Haas, Toyoda & OMAX in a 12 state region. With the Phillips' team approach, you're being served from every angle: Sales, Service, & Applications. One highly coordinated local team devoted to your machines, your business, your goals.

Service Categories: Polyurethane - Parts • Plastics - Injection Molding • Rubber - Polyurethane Molding • Plastics - Liquid Resin Casting • Urethanes - Molded/Extruded

Custom molder of plastic, rubber and polyurethane products. We mold rollers, bumpers, seals & other custom shapes. We offer cast, transfer, compression & injection molding, using engineered plastics, polyurethane, neoprene, viton, silicone etc.

Quality Certifications: MIL-45208
Service Categories: Fabricating - Sheet Metal • Machining - CNC Milling & Turning • Powder Coating • Laser Cutting • Welding - MIG

Est. in 1986 Job shop with complete Machining, Fabricating & Finishing.

Quality Certifications: ISO 9001:2008
PRECISION TOOL & MOLD     Booth # 312
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Plastics - Insert Injection Molding • Plastics - Micro Molding

We pride ourselves in providing unparalleled dedication to your project, with your success being our goal. Our production facility operates 19 molding machines ranging from 5 ton to 200 ton presses, including a shuttle press and 2 shot press. We have a fully functional, fully staffed tool making facility with cutting edge technology.

Quality Certifications: ISO 9001:2015, ISO 13485 • WBENC • WOSB • 6 SIGMA
Service Categories: Laser Cutting • Waterjet Cutting - Metal • Fabricating - Sheet Metal • Machining • Powder Coating

We are your one-stop shop for all your precision metal component fabrications and CNC machining needs. Our highly trained staff adheres to exacting standards and tolerances. Production Runs only. Prince Precision Products has the equipment to serve you.

Quality Certifications: ISO 9001:2015
PRO ULTRASONICS     Booth # 332
Service Categories: Cleaning - Ultrasonic • Cleaning & Degreasing • Industrial Equipment • Special Machinery - Design, Build & Rebuild • Surface Finishing

The leader in precision Ultrasonic Cleaning Equipment. Standard models range from small table top units to large industrial machines with optional lift tables, multiple tanks and automated processing. Save time and money with our hands-free cleaning using a wide variety of non-hazardous solutions to increase production while reducing your hazardous wastes. GO GREEN!

PROTOCAM     Booth # 228
Service Categories: Rapid Prototyping • 3D Printing • Prototypes - Plastic • Plastics - Injection Molding

A premier provider of additive manufacturing, industrial 3-D printing, rapid prototyping and prototype manufacturing. The company serves a broad spectrum of industries, including defense, aerospace, medical, automotive, industrial and consumer.

PROTOLABS     Booth # 128
Service Categories: Rapid Prototyping • Plastics - Injection Molding • 3D Printing • Machining - CNC Milling & Turning • Fabricating - Sheet Metal

We are the world's fastest digital manufacturing source for rapid prototyping and on-demand production. Our technology-enabled company produces custom parts in as fast as 1 day with automated 3D printing, CNC machining, sheet metal fabrication, and injection molding processes.

Quality Certifications: ISO 9001:2015 • ITAR REGISTERED • AS 9100
Service Categories: 3D Printing • Jigs & Fixtures • Prototypes - Models • Reverse Engineering • Tooling

Let our experienced team show you how to save time and money in your 3D Printing & Scanning needs, with the full range of Stratasys 3D Printers and Creaform & Artec scanners. We can help you print functional, durable 3D models of your most intricate product designs, directly from your 3D CAD files.

Quality Certifications: A.S.M.E. CERTIFIED • # 97-112 CERT
QUALITY MOLD SHOP INC.     Booth # 318
Service Categories: Molds & Moldmaking - Plastic • Plastics - Injection Molding • Engineering & Technical Services • Laser Welding - Mold Repair • Machining - Precision CNC

Since 1976 we have been providing durable high production mold designs and molds for the automotive, medical, and appliance industries. ISO 9001:2015 Certified.

Quality Certifications: ISO 9001:2015
Service Categories: Screw Machining - Multi Spindle • Machining - CNC Milling & Turning • Machining - Precision CNC • Machining - Multi Axis • Screw Machining - Swiss/CNC Swiss

Offering precision production machining, featuring twin-spindle multi-tasking CNC turnmill centers and multi axis CNC cells, swiss, & multiple spindle screw machines.

Quality Certifications: ISO 9001:2008 • ITAR REGISTERED
Service Categories: Machining - Aluminum • Machining - Stainless Steel • Machining - Castings • Machining - Exotic Materials • Surface Treatment

A precision CNC parts manufacturing organization with expertise in multi-axis machining of metal and plastic parts with complex geometries. We produce machined parts for the automotive, aerospace, military and industrial industries. Our manufacturing and quality management systems are dedicated to exceeding our customer's expectations.

Quality Certifications: AS 9100D • ISO 9001 • ITAR • SAM
Service Categories: Metal Finishing - Anodizing • Clad Metals • Extrusions - Aluminum • Fabricating - Aluminum • Fabricating - Sheet Metal

A metals distributor with stocked inventories of anodize quality aluminum sheet and aluminum extrusions as well as a metal fabricator. SAF is an anodizer, and aluminum painter with aluminum coil anodizing as well. SAF focuses on value-added vertical integration as a distributor/fabricator/finisher with attention paid to speed and quality materials and service.

Quality Certifications: AAMA • AAMA 2605 • MIL-A-8625 Type II • 5S
Service Categories: Plastics - Injection Molding • Prototypes - Plastic • Plastics - Low Volume • Molds & Moldmaking - Plastic • Plastics - Painting

We are a full service plastic injection molding company specializing in prototype injection molding, low to mid volume production and mold making. We are headquartered in the Clearwater Beach/Tampa Bay area and have two manufacturing locations, Port Richey and Brooksville, FL. Employing 160, Seaway strives to provide technology leadership and performance excellence to medical, aerospace, military, packaging, food service, industrial and consumer products.

Quality Certifications: ISO 13485:2016, ISO 9001:2015 • ANSI/ASQ Q9001-2000 • ITAR REGISTERED • NADCAP ACCREDITED
SEVEN RANGES MFG. CORP.     Booth # 317
Service Categories: Stampings - Deep Drawn Shells • Stampings - Heavy Gauge • Stampings - High Volume • Stampings - Progressive Die • Tanks - Small Cylindrical

We are a 4 to 1 ratio deep drawn metal stamping house that is well versed in carbon steel, stainless steel, aluminum, copper, & brass. We are known for heavy gauge, high volume stamping & can customize stamping jobs for medium volume, medium run & short run stamping jobs that will fit a customer's budget & time frame. For additional information please contact Kurt Fogle at 330-627-7155, ext. 105 or

Quality Certifications: ISO 9001-2015 • DOD REGISTERED
SMART PRODUCTS USA     Booth # 126
Service Categories: Valves & Controls • Pumps & Reservoirs

Designs & manufactures an extensive family of check valves, pressure relief valves, pumps, & related components for advanced low pressure, low flow applications.

Quality Certifications: ISO 9001:2015
SMC LLC     Booth # 211
Service Categories: Assemblies - Electronic • Assemblies - Turnkey • Cable & Wire Manufacturing • Assemblies - Electromechanical • Assemblies - Printed Circuit Boards

Your one stop electronics manufacturing solutions company. We excel in supporting customers who are in need of need engineering service support, quality circuit board manufacturing, complex wire harness and cable assembly, system integration solutions, in-house test development, domestic and International supply chain management programs, and a global alliance MFG options.

Quality Certifications: ISO 9000:2001 • ISO 13485 • FDA REGISTERED • IPC/WHMA-A-620
Service Categories: Heat Treating • Heat Treating - Vacuum Carburizing LPVC • Brazing - Vacuum Furnace • Cryogenic Treatment

We offer high quality Vacuum Heat Treating services producing bright, scale-free parts with minimal distortion. Markets served include aerospace, medical, power generation, firearms & ordnance, and more. Our state-of-the-art vacuum furnaces range from lab sized to 48’. Four plants located in Souderton, PA, Hermitage, PA, Greenville, SC, and Fontana, CA.

Quality Certifications: NADCAP • ITAR • ISO 9001:2015 • AS 9100D
SOUCY BARON     Booth # 232
Service Categories: Rubber Molding • Rubber To Metal Bonding • Prototypes - Rubber

Custom molding of engineered precision rubber components with specialization in NVH (Noise, Vibration, Harshness). Markets served: personal protective equipment, lawn & garden equipment, agricultural, aggregate & mining equipment, defense, automotive & powersport industries. Custom compounding of all thermoset elastomers. Product design & testing services available. Worldwide locations.

Quality Certifications: ISO 9001:2015
Service Categories: Industrial Equipment • Industrial Design Services • Coatings • Powder Coating • Filters

We provide the highest quality heat processing, liquid and powder coating equipment, design and installation services available. As a single source supplier of products and services for all paint application needs, we are authorized distributors for Nordson, Bink, Devilbiss, ARO, Global Finishing Solutions, Boge, Curtis and Mattei Air Compressors, and Prevost Pipe.

Service Categories: Springs - Coil • Stampings - Metal • Laser Cutting • Bending - Custom • Fabricating - Sheet Metal

Custom Compression, Extension & Torsion Springs. Wire Forms, Stampings, Fourslide parts, Progressive Die, In-House Tool & Die, Precision Sheet Metal Fab, Fiberoptic Laser Cutting & Machining. Grinding, Shot-peening, Powder Coating, Painting & Silk Screen Printing. Prototypes to production. Please follow us on Instagram. Visit our website for a free quote.

Service Categories: Laser Cutting • Waterjet Cutting - Non-Metal • Welding & Weldments • Waterjet Cutting - Metal • Powder Coating

A locally owned & operated corporation which offers a complete manufacturing solution from concept to complete assembly. We have been a solution in the fabrication industry since 1981. Our commitment to excellence & customer service has enabled us to be a constant reliable provider to our customers. To learn more about how we can help you, email ISO 9001:2015 Registration Pending

Service Categories: Fasteners • Screw Machining • Metal Finishing - Plating • Stampings - Metal • Labels, Tapes & Decals

A subsidiary of Park Ohio. We are a Global Partner in Total Supply Chain Management that specializes in a proactive approach to managing efficiencies in all aspects of supplying parts & materials that ultimately are delivered to your production floor. This includes planning, implementing & managing the flow of product for any size world class domestic/international mfg. company by enabling them to build products better, smarter & faster than every before.

Quality Certifications: ISO 9001 • ISO 14001 • ISO 17025 • AS 9120B
SWIFT ATLANTA INC.     Booth # 302
Service Categories: Fabricating - Sheet Metal • Fabricating - Stainless Steel • Machining • Powder Coating • Metal Cabinets & Enclosures

An established precision sheet metal & machining facility specializing in piece part metal fabrication and sub-assembly work. We offer a series of value added services that are available to you, our customer, to further enhance your product offerings. We are an ISO and ITAR certified facility with a focus on quality & unmatchable service.

Quality Certifications: ISO 9001:2008 • ITAR
SWISSOMATION INC.     Booth # 235
Service Categories: Screw Machining - Swiss/CNC Swiss • Machining - Miniature Precision • Machining - Precision CNC • Plastics - Screw Machining • Screw Machining - Escomatics

CNC & Swiss Type machining and Micro-machining. Over 75 Citizen and Maier Swiss CNC Screw Machines. Prototype to Production; .004" (.1mm) to 1.625" (42mm) diameter, for the Medical, Dental, Electronics, Microwave, Government etc. Metals and Plastics! Our second location, Swissomation Virginia, 254 Industrial Park Dr. Amherst, VA 24521 Phone: 434-946-7360, ISO 9001:2008 Compliant.

Quality Certifications: SPC • KEYENCE INSPECTION • ITAR
Service Categories: Special Machinery - Design, Build & Rebuild • Welding - Resistance • Systems Integration • Heat Treating • Welding - Robotic

Custom machine builder of material joining equipment and assembly systems. Complete R&D, design, engineering, assembly, wiring, testing, and field service capabilities. We build machines for parts production by using resistance, ARC laser, linear friction welding, induction heating and capacitor discharge with the options of integrating robots & vision systems.

Quality Certifications: AWS • RWMA
TEAM INDUSTRIES INC.     Booth # 341
Service Categories: Assemblies - Mechanical • Machining - Precision CNC • Castings - Die, Aluminum • Gears

A design and manufacturing organization that can take your power train idea from concept to prototype to pilot to production. TEAM Industries also specializes in contract manufacturing of gears, shafts, and cases. We have 6 facilities in Minnesota, North Carolina, and Mexico employing over 1200 people.

Quality Certifications: IATF 16949:2016
TEMPCO MFG. CO. INC.     Booth # 141
Service Categories: Stampings - Metal • Fabricating - Sheet Metal • Assemblies - Mechanical • Welding & Weldments • Tools, Dies & Fixtures

With over 70 years of experience, Tempco Manufacturing produces precision metal stampings, precision sheet metal fabrications, and mechanical assemblies for clients across numerous industries. Tempco Manufacturing offers a complete tool & die room to go along with secondary services to be your one stop shop for metal stampings and sheet metal fabrications.

Quality Certifications: AS9100D • ISO 13485:2016 • ISO 9001:2015
TPM     Booth # 327
Service Categories: CAD/CAM Software • 3D Printing • Rapid Prototyping • Rapid Prototyping - Equipment • CAD/CAM Training

A leading technology company headquartered in Greenville, South Carolina. TPM provides additive manufacturing solutions from HP and MarkForged as well as design tools from SOLIDWORKS and Autodesk to customers throughout the Southeast.

TRIMECH     Booth # 110
Service Categories: CAD/CAM Software • 3D Printing • CAD/CAM Training • Rapid Prototyping

We provide thousands of engineering teams with a range of 3D design and rapid prototyping solutions that work hand-in-hand from sketch to manufacturing. We offer the entire SOLIDWORKS product portfolio, Stratasys 3D printers, rapid prototyping services and other engineering solutions servicing the East Coast from Maine to Florida.

TRIRX MEDICAL     Booth # 334
Service Categories: Machining - Miniature Precision • Machining - Microwave • Screw Machining - Swiss/CNC Swiss • EDM - Wire • Laser Marking

A contract manufacturer for the medical device industry, microwave wave guides, aerospace smaller parts, and military applications. CNC swiss up to 8 axis, high speed machining centers, CNC turning. High precision and fussy parts. All materials including implant grades, titanium, stainless, bar stock and small castings.

Quality Certifications: ISO 13485:2016
TRYCO TOOL & MFG.     Booth # 233
Service Categories: Stampings - Metal • Stampings - Progressive Die • Assemblies - Mechanical • Stampings - Tapped • Stampings - Deep Drawn Shells

Precision Metal Stampings. An aggressive metal stamping company specializing in precision stampings & assemblies in medium to long run quantities. Presses range from 22-200 tons. Work with all metals.

Quality Certifications: ISO 9001
Service Categories: Plastics - Injection Molding • Plastics - Insert Injection Molding • Plastics - Elastomeric Overmolding • Plastic Coatings - EMI/RFI • Plastics - Heat Sealing & Welding

A leading manufacturer of precision injection molded plastic components and mechanical assemblies, we have the technical expertise and manufacturing capability to take your project from concept to production, on-time, in-spec, and on budget. We utilize lean manufacturing principles to deliver extreme value and we strive to exceed expectations on every program we support.

Quality Certifications: ISO 9001:2015 • ACNOR CSA W.47 • UL RECOGNIZED • ITAR REGISTERED
Service Categories: Plastics - Thermoforming/Vacuum Forming • Plastics - Pressure Forming • Plastics - Injection Molding • Plastics - Gas-Assist Molded • Plastics - Structural Foam

We are the largest precision thermoformer (US) with locations in Western, MA (Holyoke), Central, MA (Sutton), and Upstate, NY (Albany), and serve the aerospace, medical, transportation and industrial segments. Universal Plastics Group also includes gas assist injection molder Sajar Plastics (OH) and blow molder Premium Plastic Solutions (PA).

Quality Certifications: ISO 9001:2015
USA DUTCH INC.     Booth # 118
Service Categories: Fabricating - Sheet Metal • Machining - CNC Milling & Turning • Laser Cutting • Welding & Weldments • Assemblies - Mechanical

We provide full sheetmetal fabrication and CNC machining services. We offer up-to-date technology, outstanding performance, and most of all a burning desire to help you succeed. It is our intention to take care of you - to make your life easy when it comes to metal parts.

Quality Certifications: ISO REGISTERED
Service Categories: Metal Finishing - Anodizing • Metal Finishing - Electroless Nickel • Metal Finishing - Electropolishing • Metal Finishing - Passivating • Metal Finishing - Zinc Plating

We are an ISO 9001:2015 certified metal finishing job shop. Capabilities include types I, II, and III Anodizing, Zinc, Electroless Nickel, Electropolish, Passivation and Black Oxide. Industrial production jobs as well as restoration work. High quality, quick turn-around time and competitive pricing. Call us for your next RFQ!

Quality Certifications: ISO 9001:2015
Service Categories: Machining - Production • Machining - Precision CNC • Tools, Dies & Fixtures • Machining • Prototypes - Machining

WMM manufactures small to medium size machined components from bar, cast, stamped, or forged materials. EAU volumes of 1 to 1 million are achievable, while 10,000 to 150,000 is ideal. Our 60+ CNC machines include Mills, Lathes & Swiss Lathes. Additional in-house capabilities include Saw Cutting & Deburring.

Quality Certifications: ISO 9001:2008
WEAVER & SONS     Booth # 440
Service Categories: Fabricating - Sheet Metal • Laser Cutting • Fabricating - Stainless Steel • Fabricating - Aluminum • Roll Forming

Since 1945, we have set the standard as a precision sheet and plate metal fabricator. We offer custom fabrication, contract manufacturing, roll forming and industrial painting services of component parts and complete assemblies for industrial customers throughout the region and the United States.

Quality Certifications: AMER WELDING SOCIETY • D1.1 WELDING • ISO 9001:2015
WEPCO PLASTICS INC.     Booth # 122
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Prototypes - Plastic • Plastics - Elastomeric Overmolding • Plastics - Insert Injection Molding

We are a family owned full-service mold making and plastic injection molding company offering American made parts. We specialize in rapid prototype onsite tooling and short to medium run plastic injection molding with 4 axis machining, fixturing, and secondaries.

Service Categories: Springs - Coil • Wire Forming & Fabricating • Coatings • Cold Heading - Cold Forming • Assemblies

Family owned custom spring designer and manufacturer specializing in wire forms, extension, torsion, double torsion and compression springs. All springs and wire forms made domestically ranging from .008" to .625" wire. Double torsion/tines up to .750" with 196" developed length. Solid cold drawn stabilizer bars up to .812”.

Quality Certifications: ISO 9001:2015
Service Categories: 3D Printing • Plastics - Injection Molding • Plastics - Insert Injection Molding

We are a custom plastic injection & insert molding facility located in York, PA. Our 25, all electric high performance molding presses range from 33 to 720 tons, & service a variety of industries. We offer superior quality as an ISO Certified Company, Solidworks Plastic mold flow & warp analysis capabilities. Our products are proudly Made in America since 1985.

Quality Certifications: ISO 9001:2015 CERTIFIED
Service Categories: Measurement & Inspection • Measurement - Equipment • Measurement - Software

We are the world's leader in CNC coordinate measuring machines (CMMs) & complete solutions for multidimensional metrology in the metrology lab & production.


© 2019 The Job Shop Company • 16 Waterbury Road, Prospect, CT 06712 • (800) 225-4535