Southern New England Design-2-Part Show
April 24 & 25, 2019
Mohegan Sun Exposition Center • Uncasvillë, CT

Search by Category


Search by Keywords

  Reset Search  

0 Exhibitors to Meet

Exhibitor List

Listed below are the current exhibitors and service categories of companies in the show.
This page is also an interactive tool for you to use when planning your personal visit.

[ 244 ] companies match your search.
FEATURED EXHIBITORS listed first alphabetically
Service Categories: Metal Finishing - Anodizing • Metal Finishing - Electropolishing • Metal Finishing - Hard Coating • Metal Finishing - Chromate • Metal Finishing - Passivating

Now under new Ownership. Accurate Metal Finishing LLC has been successfully operating since the late 60's; we now look forward to operating and growing to our full potential offering large and small capacity finishing of Aluminum and Stainless steel including Anodizing Type II and Type III, Chromate, Electropolishing and Passivation.

Quality Certifications: ISO 9001 • AS 9100 • LOCKHEED MARTIN • BAE APPROVED
ACRO INDUSTRIES INC.     Booth # 438
Service Categories: Fabricating - Sheet Metal • Assemblies - Honeycomb • Laminating • Stampings - Metal • Stampings - Progressive Die

Offers expertise in full service Contract Manufacturing, Product Design, Engineering, Supply Chain Management, System/Module Assemblies, Production Stamping, Laser & Short Run Fabrication and Custom Laminate Panel Fabrications.

Quality Certifications: ISO 9001:2015 REGISTERED • ITAR
ADRON TOOL CORP.     Booth # 103
Service Categories: EDM • EDM - Wire • EDM - Sinker • EDM - Small Hole Drilling • Machining - Production

Wire EDM specialists with over 55 CNC Wire EDM machines , CNC (sinker) std. EDM; largest capacity, 40"x32"x18", workpiece weight up to 10,000 lbs., 26-1/2" thick; metal parts rapid prototyping service and production runs of complex, contoured shapes in tough to machine or exotic material; CNC production machining, coord. measuring sys., SPC, OGP optical non-contact measuring.

Quality Certifications: ISO 9001:2008 • AS 9100 • NADCAP AS7116
ALPHA GRAINGER MFG. INC.     Booth # 372
Service Categories: Machining - CNC Milling & Turning • Machining - Multi Axis • Machining - Precision CNC • Machining - Rotary Transfer • Screw Machining - Swiss/CNC Swiss

A production machine shop, with a state-of-the-art 90,000 sq. ft. manufacturing facility in Franklin, MA. AGMI has 24 INDEX multi turret and multi spindle mill turn centers, with a wide range of capability for high speed complex part manufacturing. More than 100 machining centers in-house. AS 9100C, ISO 9001:2008, ITAR, and FFL in hand. Full CMM, Laser, Vision, and Video.

Quality Certifications: AS 9100C:2009-01 • ISO 9001:2008 • ITAR • FFL
AMCO POLYMERS     Booth # 340
Service Categories: Plastics - Raw Materials • Plastics - Injection Molding • Plastics - Blow Molding • Materials - Plastic • Plastics - Compounds

We are a resin distributor, global custom formulator of UL Listed engineering thermoplastics, and custom compounder. Amco Polymers was founded in 1955 with a philosophy based on helping customers find solutions to problems and a commitment to continuous improvement.

Quality Certifications: UL CERTIFIED • ISO 9001 CERTIFIED • RoHS
AMERICAN TOOL CO.     Booth # 470
Service Categories: Machining • Machining - Large Parts • Welding & Weldments

Job Shop that celebrated 100 years providing quality machining services in 2018! American Tool Company specializes in large diameter and one-off parts. If you are looking for a machine shop that works on difficult parts on a daily basis you have found us. We take pride in our dedication to producing quality parts and meeting or exceeding delivery deadlines.

Quality Certifications: CAGE CODE • MIL-I-45208A
Service Categories: Machining - CNC Milling & Turning • Assemblies - Electromechanical • Screw Machining - Swiss/CNC Swiss • Prototypes - Machining • Machining - Production

We are one of the nation’s leading precision machining and product assembly companies. An innovator in contract manufacturing and a value-added partner to the world’s leading original equipment manufacturers. Specializing in CNC Precision Parts & Prototypes through Production, Assemblies, Screw Machine Products, Swiss CNC, Single Side Lapping, Electromechanical Assemblies, Brazing, Vacuum Brazing, Milling Vertical & Horizontal, turning. 3D ABS Prototypes, Forward & Reverse Engineering, Contract Manufacturing, Spin Balancing, Laser Marking, Private Labeling, Drop Shipments & Inventory Reduction.

Quality Certifications: AS 9100D • ISO 9001:2015 • ITAR • FFL, FDA & UL REGISTERED
Service Categories: Gaskets, Seals, Washers & O-rings • Rubber Molding • Rubber To Metal Bonding • Silicone / Rubber - Liquid Injection Molding • Prototypes - Rubber

Manufacturer of elastomeric parts. O-Rings; MicrOrings to MacrOrings, AS568 & ISO 3601 (search inventory from our Website). We design & manufacture custom, rubber bonded to plastic, metal & filter materials, and medical rubber parts. Our services include engineering, design assistance & QC testing & reporting, from prototype to Production. Class 7 (10,000) clean room.

Quality Certifications: ISO 9001 • AS 9100
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic

Centrally located custom injection molder & mold maker with press sizes from 28 ton, 1 oz. shot size to 500 ton, 52 oz. Focus on engineering materials & Class 101 molds. Highly proficient with molding, assembly & secondary processing of plastic molded components.

ASH INDUSTRIES     Booth # 138
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Plastics - Rotational Molding • Plastics - Hot Stamping & Screening • Prototypes - Plastic

Engineered for You. In-House Thermoplastic, Silicone and Metal Injection Molding (MIM), Rotational Molding & Tooling as well as cast epoxy components & 7-Axis Swiss Lathe production. Molding includes custom inserts, over-molding and two shot molding. Component assembly, secondary processing & decorating, utilizing the latest in CNC, EDM & Modeling technology.

Quality Certifications: ISO 9001 • ISO 7 CLASS 10K CLEAN ROOM • ITAR REGISTERED
BLASE MFG. CO.     Booth # 348
Service Categories: Stampings - Ferrous & Non Ferrous • Stampings - High Volume • Stampings - Short Run • Tools, Dies & Fixtures • CAD Design Services

Manufacturer of high precision metal stampings to a variety of markets, with a specialization in parts which other stampers find difficult to produce.

Quality Certifications: ANSI/ISO/ASQ 9001:2015 • ANSI/Y14.5M • MIL-STD-105-E
Service Categories: Machining - Multi Axis • Machining - CNC Milling & Turning • Machining - Production • Gears

Our core competencies lay in our ability to machine complex multi-axis components from modeling, programming; machining to first article inspection with responsive lead-times. Boulevard’s blend of talented machinists provides unapparelled quality components while utilizing a mix of 5-Axis Milling, CNC Turning, and CNC Gear Cutting equipment.

Quality Certifications: AS 9100 REV D CERTIFIED • ISO 9001:2015 • ITAR • WBENC
C & A TOOL & ENGINEERING     Booth # 146
Service Categories: Machining - CNC Milling & Turning • Assemblies - Mechanical • Grinding • EDM • 3D Printing

Large job shop offering Milling, Turning, Grinding, EDM, Direct Metal Laser Sintering, Polishing, Gun Drilling, Ball Grinding & other machining operations.

Quality Certifications: AS 9100 • ISO 13485 • ISO 9001:2000 • TS 16949
Service Categories: Castings - Die • Machining - Castings • Metal Finishing - Painting • Assemblies - Electromechanical • Assemblies - Turnkey

Complete (1) Source Responsibility for Contract Manufacturing, Electromechanical Fabrication, Design Engineering, Prototype Development, Machine from Solid, Medium to High Volume Production, Secondary Machining, Powder Coating, Wet Painting, Silk Screening, Chromating, Impregnating, Pressure Testing, Complete Mechanical Assembly, Sourcing, Warehousing & Worldwide Shipping.

Quality Certifications: ISO 9001:2015 • ISO 14001-2004
CERAMCO INC.     Booth # 217
Service Categories: Ceramics - Injection Molding • 3D Printing • Ceramic Parts • Fasteners • Grinding - Ceramics

We manufacture OEM technical ceramics of complex geometries and stock ceramic fasteners. Production technologies include additive (LCM) and injection molding. Support processes include near-net shaping, powder metallurgy, machining/diamond grinding, glazing, coating and assembly. Material compositions: alumina, zirconia, silicon nitride and custom formulations.

Quality Certifications: ISO 9001:2015 • ITAR REGISTERED • SAM REGISTERED
Service Categories: Assemblies - Electromechanical • Assemblies - Printed Circuit Boards • Assemblies - Mechanical • Assemblies - Turnkey • Systems Integration

We offer Precision Engagement® Contract Manufacturing for quality-sensitive projects from boards to full systems. From Transition to Manufacturing, to full production, fulfillment, and aftermarket services, it's tailored to You. Our customers include world-class robotics, medtech, industrial and defense/security companies. Partner with us. We'll make it simple. Promise.

Quality Certifications: ISO 9001 • ISO 13485 • ITAR & FDA REGISTERED • WOSB
Service Categories: Plastics - Injection Molding • Assemblies • Packaging • Plastics - Insert Injection Molding • Plastics - Hot Stamping & Screening

Not-for-Profit custom contract manufacturer providing services for parts, sub-assemblies and complete turn-key solutions with less than 1/2% defect rate. Medical and non-medical kitting, cleanroom and white room services. Providing jobs and services for individuals with disabilities for 50 years.

Quality Certifications: FDA REGISTERED • ISO 9001:2015
Service Categories: Stampings - Progressive Die • EDM - Wire • Laser Marking • Machining - Precision CNC • Tools, Dies & Fixtures

We are a contract manufacturing leader, assisting companies with the design, development and production of critical components and sub-assemblies for their products. Component Engineers also produces finished complete assemblies & devices. CEI offers Stamping, CNC Mill Turn, Swiss Machine, Wire EDM & Laser Marking.

Quality Certifications: AS 9100D • ISO 13485:2016 • ISO 9001:2015 • ITAR - FFL
Service Categories: Wire & Cable Harnesses • Assemblies - Cable • Assemblies - Electromechanical • Assemblies - Electrical • Plastics - Insert Injection Molding

An IS09001, AS9100 and HUBZone Certified contract manufacturer of complex wire harnesses, cable assemblies, and electro-mechanical assemblies to the most demanding specifications. With our molding and overmolding capabilities CME is focused on the design and manufacture of custom LSZH cables & cords for both commercial and military uses.

Quality Certifications: ITAR REGISTERED • ISO 9001, AS 9100 • HUBZONE CERTIFIED • VOSB
Service Categories: CAD Design Services • Reverse Engineering • Plastics - Low Volume • Machining - CNC Milling & Turning • Molds & Moldmaking - Plastic

Contract services to the plastics industry. Services include product design and development, mold design, laser scanning, reverse engineering, prototyping, short run production, molding, tooling, CNC machining and mold components.

DB ROBERTS     Booth # 135
Service Categories: Fasteners • Electronic Hardware • Assembly Hardware • Levers, Knobs & Handles • Masking

Since our inception, we have been focused on providing solutions for fastener applications in Sheet Metal Fabrication, Metalworking, and Industrial Electronics. Our "Superior Customer Service" and "Commitment to Excellence" have proven to be a winning formula fueling innovation and rapid growth year after year.

Quality Certifications: ISO 9001:2015 • AS 9120B
Service Categories: Consulting - Manufacturing

Provides the fastest, simplest, and safest way to manufacture electronics at scale. Dragon Innovation does this through our industry expertise and easy to use software to help get your products to market at cost, on time and done right.

DYSINGER INC.     Booth # 239
Service Categories: Machining - Precision CNC • Grinding - Precision • Machining - Large Parts • Assemblies - Mechanical • EDM - Wire

Whether it is precision machining services, sub-assembly support, or high value added process engineering solutions, we have the knowledge and the tools to turn your production problems into profitable opportunities. We strive to develop solid customer relationships based upon high quality standards, reliable performance to commitments and attentive service.

Quality Certifications: ISO 9001:2015 • AS9100:2016 Rev D • ITAR
EMPIRE GROUP     Booth # 302
Service Categories: Prototypes - Models • Industrial Design Services • Rapid Prototyping • Machining - CNC Milling & Turning • Castings - Rubber Mold

We are a full-service product development company focused on enhancing your ability to move with speed, flexibility & confidence through ALL stages of development from ANY starting point, with quality & satisfaction guaranteed. We provide customized solutions catered to your needs in product design & engineering, rapid prototyping, graphic design & manufacturing.

Quality Certifications: ISO 9001:2015 • ITAR
EPOXIES ETC.     Booth # 405
Service Categories: Adhesives • Potting & Encapsulation

We are an ISO 9001:2015 registered company, founded in 1987 as a manufacturer of epoxy, urethane, and silicone systems. As an industry leader, our adhesives, coatings, and potting and encapsulating compounds are widely utilized in the most demanding aerospace, electronic, industrial and decorative applications.

Quality Certifications: ISO 9001:2015 CERTIFIED
Service Categories: Aluminum - Materials • Coils • Extrusions - Aluminum • Fabricating - Aluminum

Aluminum reroll mill specializing in aluminum coil with minimum earing, fine grain, suitable for deep draw applications. Erickson rolls gauges from .006"-.125", slits to widths from .250" - 36", and can hold tolerances to less than half commercial standards. Erickson also has three full line distribution centers (MN, CO, NM) which offer all other aluminum products.

Quality Certifications: ISO 9001:2015 REGISTERED • AMSQQA • ASTM SPEC • COC Certificate
Service Categories: Springs - Coil • Springs - Flat • Wire Forming & Fabricating • Stampings - Fourslide • Stampings - Short Run

Manufacturer of custom springs, wire forms and metal forms. We utilize SPC systems, CNC coilers and experienced craftsmen to assure consistent quality. Design assistance and rush orders are welcome. Wisconsin Grand Manufacturer of the Year. We Quality Certify each process & provide a total Value-added supplier package. 10 piece minimum for custom spring and wire forms.

Quality Certifications: ISO 9001:2015 • ITAR REGISTERED
G & R MFG.     Booth # 445
Service Categories: Stampings - Deep Drawn Shells • Stampings - High Volume • Stampings - Short Run • Assemblies • Prototypes - Stamping

Supplies basic stampings and eyelets to intricate multi-component assemblies all with the service and quality you expect from a world class manufacturing company. Established in 1972, G & R Manufacturing has transformed into a full service "turn key" manufacturing facility from prototype to production.

Quality Certifications: ISO 9001-2015 • ANAB • ITAR CERTIFIED
G P PRECISION INC.     Booth # 107
Service Categories: Fabricating - Sheet Metal • Electronic Enclosures • Fabricating - Stainless Steel

Full service, sheet metal fabricator providing design, prototype, pilot & production runs. Fiber Optic Laser cutting & CNC punching, forming, welding (TIG, MIG & Spot). Aluminum, Steel, Stainless Steel. Plating & painting, screenprinting & assembly. Quick turn readily available. Get an instant quote: - RoHS Compliant & ISO 9001:2015 Certified.

Quality Certifications: ISO 9001:2015 CERTIFIED
Service Categories: Fasteners • Electronic Hardware • Adhesives • Assemblies - Electrical • Assembly Hardware

Our SAE AS9120 Registered Quality Management System and full service Quality Assurance facilities coupled with many years of technical sales experience and deep product line inventory ensure our commitment to total customer satisfaction. Together these make Hardware Specialty an unbeatable source for all your fastener and electronic component requirements.

Quality Certifications: SAE AS9120 • ISO 9001:2008 • ISO 14001 • MIL STD 45662A
Service Categories: Consulting - Manufacturing

We are a consulting firm for manufacturers that specializes in Research & Development Tax Credits, Exporting Incentives, ERP Implementations, ISO Certifications, Succession Planning, and Cost Segregation to name a few.

Service Categories: Fabricating - Sheet Metal • Machining - Precision CNC • Metal Cabinets & Enclosures • Electronic Enclosures • Prototypes - Fabrication

We are a full service sheet metal fabrication facility and we have proudly served our customers providing reliable, quality service since 1986. We specialize in fabricating electronic enclosures, brackets, chassis, custom panels, tubular frames and electro-mechanical assemblies.

Quality Certifications: ISO 9001:2015
KOSMO MACHINE INC.     Booth # 330
Service Categories: Machining • EDM • EDM - Sinker • EDM - Wire • Inspection Services

Employee owned business devoted to quality production and superior customer service. Our full-service precision machine shop specializes in CNC milling and turning, EDM machining and custom welding processes. We also offer a range of reconditioning services, including dry-ice blasting and alternative methods of advanced cleaning.

Quality Certifications: ISO 9001-2015 • AS9100-D • PED CE CAT II EU • SUBSAFE LEVEL-1
Service Categories: Metal Finishing - Anodizing • Metal Finishing - Hard Coating • Metal Finishing - Phosphating • Laser Marking • Metal Finishing - Dry Lubrication

Bulk, rack, hardcoat anodizing - all colors, sizes .050" up to 15 feet. Other services include - Manganese Phosphating (Steel), dry film lubricants, passivation, chromate conversion coatings, Laser Marking & plating. One of the largest anodizers & metal finishers in the USA.

Quality Certifications: ISO 9001:2000 • NADCAP APPROVED
LYNN WELDING     Booth # 314
Service Categories: Welding - TIG Aluminum • Welding - Resistance • Machining - CNC Milling & Turning • EDM - Wire • Machining - Precision CNC

A NADCAP accredited, LCS approved and AS 9100 certified welding shop specializing in GTAW Welding, Resistance Welding and Brazing. Lynn Welding also houses a state-of-the-art CNC machining and tool making department; 4-axis milling, Wire EDM and Turning capabilities. Our ability to weld, machine and fabricate entire assemblies is what makes us truly unique. Serving the Aerospace, Defense, Nuclear, Industrial, and Medical industries.

Quality Certifications: ISO 9001:2015, AS 9100D • NADCAP • MIL-W-6858D • AWSD17.1
MADISON CO.     Booth # 425
Service Categories: Sensors • Hydraulics & Pneumatics • Industrial Equipment • Measurement - Equipment • Pumps & Reservoirs

Our mission at Madison is to take a comprehensive approach to liquid level management with technical expertise, reliable contact and non-contact liquid level sensors and switches, and outstanding service. We create successful outcomes for our customers using effective application requirements, discovery, 3D modeling and rapid prototyping.

Quality Certifications: NSF, UL • ISO 9001:2015 REGISTERED • UL, CE, CSA • RoHS
MIDGARD INC.     Booth # 211
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Assemblies • Pad Printing • Welding - Sonic

Leading injection molding facility with an in-house design staff. We can take your part from concept to completion with certified quality assurance. We provide custom tooling and repair along with assembly services.

Quality Certifications: ISO 9001:2008
O.W. LANDERGREN INC.     Booth # 104
Service Categories: Metal Spinning • Fabricating - Sheet Metal • Prototypes - Fabrication • Tanks - Small Cylindrical • Fabricating - Stainless Steel

Because of our diverse capabilities, with metal spinning being our mainstay, we then can apply our value added processes including general machining, fabrication, welding, brazing, punching, heat treating, sanding, buffing, riveting, press inserting, assembly work & special packaging, to offer our customers a full package deal.

Quality Certifications: MIL-I-45208 • MIL-STD-45662
ONSHAPE     Booth # 350
Service Categories: CAD/CAM Software

A modern CAD system that eliminates design gridlock and helps engineers do their best work. Onshape unites advanced modeling tools and design data management in a secure cloud workspace that has rapidly become the primary CAD system for thousands of companies worldwide.

Service Categories: Machining - Precision CNC • Screw Machining - Escomatics • Screw Machining - Swiss/CNC Swiss • Machining - Miniature Precision

Swiss Escomatic & CNC Screw Machines producing miniature precision parts for electronics, computer, medical, areospace, defense, automotive, and more. If you demand strict tolerances and repeatability, call us. We routinely deliver 0.0005 inch (.0125 mm) total tolerance on parts with a major diameter ranging from .0065 inches (.254 mm) to .500 inches (12.70 mm).

Quality Certifications: ISO 9001 • ISO 9001:2015 • TUV
Service Categories: Machining - Precision CNC • Machining - Production • Machining - Miniature Precision • Screw Machining - Swiss/CNC Swiss • Machining

A CNC Swiss Machine shop; Precision Express Mfg. produces precision components for various industries: medical, electronics, defense, automotive, computer, etc. Our capacities start as small as .030" in diameter up to 1.250". We cut a variety of materials: stainless steel, titanium, brass, aluminum, carbon steel alloys, teflon, copper, etc.

Service Categories: Metal Finishing - Tumble & Vibratory Polishing • Blasting • Deburring - Tumble & Vibratory • Surface Finishing • Metal Finishing - Polishing

Since 1988 we have been the experts in surface finishing solutions! Precision Finishing Services offers a wide range of Mass finishing and Abrasive sand blasting services at our 33,000 sq. ft. facility. We provide Super polishing, General deburring, descaling and many other capabilities. We can handle parts from small pins to large 12 ft. long parts! Contact us today!

Quality Certifications: AS 9100D, ISO 9001:2015 • FAA APPROVED • PWA36905 • ITAR
PROTIQ USA     Booth # 316
Service Categories: 3D Printing • Prototypes - Plastic • Tooling - Models & Prototypes • Rapid Prototyping • Heating Elements - Custom

Online Direct, Industrial Grade 3D Printing Service provider for plastic and metal materials. We utilize high quality, industrial printing technologies including SLS, DMLS, SLA and Polyjet/MultiJet. Our broad range of 3D printed Polymer/Plastic and Metal materials include both standard and proprietary options including: PA 6X, High Conductive RS Copper, Brass and more.

Quality Certifications: ISO 9001 • ISO 14001 • BSOHSAS: 18001:2007
RAZOR TOOL INC.     Booth # 374
Service Categories: Machining - Multi Axis • Machining - CNC Milling & Turning • Tools - Cutting • Laser Marking • Machining - Stainless Steel

Produces machined parts and cutting tools for a variety of manufacturing companies from different industries. Our customers are OEM's who need high quality machined parts for the machinery production as well as catalog cutting tool companies who need standard tool made to print. We also provide regrinding and special form tools to job shops.

Quality Certifications: ISO 9001:2015
SMALLEY     Booth # 142
Service Categories: Snap Rings & Retaining Rings • Springs - Coil • Springs - Wave • Springs - Flat • Fasteners

We are the exclusive manufacturer of the industry-leading Spirolox® Retaining Rings, an innovative design that features a no gap, 360° retaining surface without protruding ears to interfere with mating components. We are also the originator of Crest to Crest® Wave Springs which save up to 50% of space compared to conventional coil springs.

Quality Certifications: ISO 9001 & ISO 13485 • IATF 16949 • AS 9100 • ISO 14001
Service Categories: Plastics - Injection Molding • Plastics - Insert Injection Molding • Forgings - Closed Die • Heat Treating • Metal Finishing - Plating

We are one of America's oldest most iconic brands. For more than 160 years, our skilled precision craftsmen have created some of the finest high-performance firearms made. Smith & Wesson Precision Components now offers this craftsmanship to manufacturers looking for this same reliability. For more information on Injection Molding, Forging, Heat Treating & Finishing...Call Us.

Quality Certifications: ISO 9001:2015
Service Categories: Assemblies - Electronic • Assemblies - Turnkey • Assemblies - Electromechanical

Now, more than ever, small to medium size companies have limited resources. When you work with us we become your manufacturing partner, saving your company's resources so you can use them to focus on future designs, marketing, and sales. As a leader in SMT assembly, we can assemble your electronic board level assemblies and/or your electro-mechanical assemblies and ship them whenever, wherever, and however you want!

Quality Certifications: ISO 9001:2015
Service Categories: Stampings - Fourslide • Springs - Coil • Wire Forming & Fabricating • Assemblies • Prototypes - Fabrication

Validated Processes for Medical. Practicing Lean / SIX Sigma company. Certified Minority-Owned Business (MBE). Manufacturing precision engineered compression springs, extension springs, torsion springs, wire forms, fourslide stampings. Prototypes, EDM, Tooling, and Engineering Design Assistance. 24 - 48 hr. quote response.

Quality Certifications: ISO 13485:2016 MEDICAL • ISO 9001:2015 INDUSTRIAL • MBE CERTIFIED
THE MUSHIELD CO.     Booth # 444
Service Categories: Fabricating - Sheet Metal • Hydroforming • Laser Cutting • Magnetics • Shielding

Specializes in everything from precision sheet metal fabrication to forming and hydroforming. Whether your design is simple or complex, MuShield has the machines and resources to get the job done.

Quality Certifications: ISO 9001-2015 • AS 9100 REV D • ITAR
TIER ONE LLC     Booth # 459
Service Categories: Machining - Precision CNC • Assemblies - Electromechanical • Screw Machining - Swiss/CNC Swiss • Machining - Multi Axis • EDM - Wire

We have 50 plus years’ experience providing precision machining and manufacturing, packaging and assembly solutions for function critical, highly engineered parts and assemblies. Tier ONE is an expert in process enhancements to improve product quality and reliability, as well as cost saving strategies including lean manufacturing and effective inventory management.

Quality Certifications: AS 9100D, ISO 9001:2015
Service Categories: Stampings - Metal • Stampings - High Volume • Stampings - Progressive Die • Stampings - Deep Drawn Shells • Stampings - Ferrous & Non Ferrous

A world class contract manufacturer supplying customers with turnkey solutions to stampings from prototype to production worldwide. Presses from 32 - 600 tons of capacity, feed lines up to 60" wide and 40,000 lbs. Value added features include in-die tapping & nut/stud insertion, assembly and welding. IATF 16949 Certified. Manufacturing At Its Finest!

Quality Certifications: IATF 16949
USHECO INC.     Booth # 414
Service Categories: Plastics - Thermoforming/Vacuum Forming • Plastics - Injection Molding • Plastics - CNC Machining • Plastics - Low Volume • Plastics - Insert Injection Molding

Over 60 years of experience manufacturing custom plastic parts. We look forward to the opportunity to find solutions for our customers starting with the initial design and material selection, through the fabrication process, and on to their complete product. Usheco Inc. is a family-owned small business proud to be manufacturing in the USA!

Service Categories: Assemblies - Electronic • Assemblies - Electromechanical • Machining - CNC Milling & Turning • Fabricating - Sheet Metal • Assemblies - Turnkey

A Quality Certified contract manufacturing service which offers our customers a single "one stop" source for electronic assembly, electro-mechanical assembly, cable harness assembly, CNC 5 Axis milling/turning, and sheet metal fabrication including Amada Fiber laser, certified welding. Our mission: On-Time Delivery, Customer Satisfaction, ZERO defects.

Quality Certifications: ISO 9001:2008 • IPC-A-610 • AWSD17.1 • AS 9003
VELOCE     Booth # 401
Service Categories: 3D Printing • CAD Design Services • Castings - Rubber Mold • Rapid Prototyping • Mechanical & Electronic Design

CT’s leading provider of rapid prototyping and product development services. Our latest 3D printers (SLA) and urethane casting systems, along with experienced model makers, painters and designers/engineers, will develop and produce your product. We offer a level of quality, service and lead times that small prototype bureaus can't replicate and large bureaus can't react to!

Service Categories: Fabricating - Sheet Metal • Electronic Enclosures • Laser Cutting • Machining • Prototypes - Rapid Sheet Metal

Full service punch & laser sheet metal fabricator & machine shop. One of the first in New England with Fiber Laser. In-house processing from design through finishing. State-of-the-art bending including automatic tool changing. MIG & TIG welding. Customer service and quality that exceeds customer expectations each & every time. 1 piece to 1,000s.

WIGGINS PLASTICS     Booth # 145
Service Categories: Plastics - Injection Molding • Plastics - Compression/Transfer Molding • Plastics - Thermoset Molding • Plastics - Insert Injection Molding • Plastics - Extruded Profiles

25 presses - Single source for all your molding requirements: thermoset injection, compression & transfer molding, thermoplastic injection molding, thermoplastic extruding capabilities, thermoplastic and thermoset moldmaking; BMC & SMC molding, prototypes, engineering assistance, hot stamping, pad printing, sonic welding capabilities for both small and large parts; sub-assemblies, short & long runs.

Quality Certifications: ISO 9001:2015
WILLIAMS TOOL INC.     Booth # 129
Service Categories: Machining - CNC Milling & Turning • Machining - Precision CNC • Machining - Stainless Steel • Machining - Production • Machining - Multi Axis

CNC machined parts for industries requiring component parts that are high precision & close tolerances. We presently manufacture component parts for Medical Valves, Analysis Instrumentation & Pressure Sensing industries. While specializing in the machining of 300 Series Stainless Steel, we also machine materials including Aluminum, Brass & Titanium.

Quality Certifications: ISO 9001:2008
XACT WIRE EDM CORP.     Booth # 155
Service Categories: EDM - Wire • EDM - Small Hole Drilling • EDM • Machining - Production • Laser Marking

We specialize in providing competitive Wire EDM & High Speed Small hole EDM services to customers in the defense, medical, aerospace, electronics, energy, automation, robotics, MIM, PM and the metal machining & tooling industries. We have 45 wire EDM machines, 7 high-speed small hole machines & laser part marking. Locations in Waukesha, WI & Cary, IL.

Quality Certifications: ISO 9001:2015 • FFL • ITAR
3D MACHINE INC.     Booth # 224
Service Categories: Machining - CNC Milling & Turning • Waterjet Cutting - Metal • Screw Machining - Swiss/CNC Swiss • Assemblies • Laser Machining

A complete contract manufacturer offering CNC Machining, Waterjet, Assembly, Swiss Turning and Laser, and Supply Chain Management solutions. Focused on Lean Six Sigma continuous improvement methods to provide the lowest cost to our customers.

Quality Certifications: ISO 9001:2015
4B PLASTICS     Booth # 422
Service Categories: Plastics - CNC Machining • Gaskets, Seals, Washers & O-rings • Fabricating - Plastic • Plastics - Compression/Transfer Molding • Bellows

A third generation PTFE (Teflon) machining and manufacturing site. Since 1977 4B Plastics has developed a client list of approximately 2600 petrochemical plants and/or supply vendor companies including valve shops and support organizations across the US. We compression mold our billets and machine parts from 1/4" to 42" in diameter.

AB ELECTRONICS INC.     Booth # 410
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Electromechanical • Assemblies - Cable • Assemblies - Mechanical • Assemblies - Turnkey

Full Service Contract Manufacture of PCB Assemblies, Cable Assemblies and Complete Box Build Assemblies.

Quality Certifications: ISO 9001:2015 • IPC-J-STD • ITAR • IPC-A-610, J-STD-001
ACCESS MFG. SYSTEMS     Booth # 355
Service Categories: 3D Printing • CAD/CAM Software • Software For Job Shops & Manufacturers • CAD/CAM Training

RIZE One 3D Printer One-touch experience for pre and post processing. No chemicals, glue; zero toxic omissions or venting. Perfect for prototyping, tooling, molds and end of use parts. Medical/engineering grade material CAMWorks integrates within SolidWorks and powers the new SolidWorks CAM for seamless CNC programming.

Service Categories: Wire Forming & Fabricating • Welding & Weldments • Baskets • Fabricating - Stainless Steel • Assemblies - Mechanical

Precision custom fabrication of wire & sheet metal components using steel and stainless steel. Wire forming capabilities .050" to .500" diameter. Design, tool making, CNC forming, bending, machining, presswork, threading, stamping, resistance welding, robotic welding, assembly & specialty packaging. Powder coating & fluid bed finishing. Design assistance for new projects.

Quality Certifications: ISO 9001:2015
ACS INDUSTRIES     Booth # 344
Service Categories: Wire Forming & Fabricating • Wire Cloth Fabricating • Cable & Wire Manufacturing • Gaskets, Seals, Washers & O-rings • Perforating - Metals

Today, we are the world’s largest vertically integrated knitted wire mesh manufacturer. Additionally, we are a key global supplier of pyrotechnic airbag inflator filters, exhaust systems components to Original Equipment Manufacturers (OEMs) and Tier 1 suppliers. Furthermore, we are a global supplier to both the foodservice and janitorial industries.

Service Categories: 3D Printing • Machining - CNC Milling & Turning • Tooling - Rapid Injection Molding • Prototypes - Rapid Sheet Metal • Rubber - Compression Molding

Established in 2009, we offer metal & plastic 3D Printing, and traditional manufacturing. ITAR & ISO 9001 services include: SLA, CNC, SLS, FDM, DMLS, Polyjet, Urethane & Metal Castings, Laser Cutting, Production Tooling & Molding. We have over 20 years of additive and traditional manufacturing experience, and provide outstanding customer service.

Quality Certifications: ITAR • ISO 9001
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Engineering & Technical Services • Plastics - Insert Injection Molding • Tooling - Plastic Injection Molding

Custom injection molds and molding. Mold and product design assistance utilizing the latest in 3D CAD technology. State-of-the-art manufacturing facility. Secondary operations including decorating, sonic welding, heat staking, machining and light assembly. Highly competitive and reliable. EMI/RFI.

Quality Certifications: ISO 9001:2015
AERODYNAMICS INC.     Booth # 446
Service Categories: Metal Finishing - Anodizing • Metal Finishing - Chromate • Metal Finishing - Passivating • Metal Finishing - Electroless Nickel • Metal Finishing - Chrome Plating

Providing quality products and services since 1989, AeroDynamics is a state-of-the-art, 50,000 square foot, full-service electroplating and metal finishing company with NADCAP approval. We specialize mainly in the Aerospace, Military, and Defense industries but also service a large customer base in the Commercial, Industrial, and Medical fields as well.

Service Categories: Metal Finishing - Anodizing • Metal Finishing - Alodining • Metal Finishing - Electroless Nickel • Metal Finishing - Passivating • Metal Finishing - Hard Coating

Aerotech Processing Solutions is an ISO and NADCAP certified special processing facility serving the aerospace, defense, medical, general manufacturing industries. We provide NDT, Anodizing, Plating, and Painting and are approved by most major aerospace manufacturers.

Quality Certifications: ISO 9001:2015 • NADCAP
AIRBORN INC.     Booth # 417
Service Categories: Connectors & Couplings • Assemblies - Cable • Electronic Components • Wire & Cable Harnesses • Engineering & Technical Services

An employee owned company whose core business is engineering & manufacturing specialized connectors & electronic components for Original Equipment Manufacturers (OEMs). AirBorn serves customers across many industries including: Aerospace, Energy, Geophysical, Industrial, Instrumentation, Marine, Medical, Military/Defense and Space Exploration.

Quality Certifications: AS 9100 REV D • 5S • 6 SIGMA • ANSI-J-STD001
Service Categories: 3D Printing

We offer a range of 3D printing solutions from Markforged including direct to metal and composite carbon fiber 3D printers. Alpha offers complete solutions including sales, installation, training and ongoing service/support. For more information or questions please email

Service Categories: 3D Printing • Metal Injection Molding • Powder Metal Parts • Machining - CNC Milling & Turning • Assemblies

An industry leader in manufacturing, machining, and assembly of metal injection molded and additivie manufactured components. Providing customers in the firearms, medical, aerospace, and consumer industries for over 15 years from our ISO 9001 certified facility.

Quality Certifications: ISO 9001-2015
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Turnkey • Assemblies - Electromechanical • Engineering & Technical Services • Prototypes - Electromechanical

We are an AS9100 certified contract manufacturer of printed circuit board assemblies, chassis and control panels. We use LEAN principles and Six Sigma practices to deliver quality assemblies on-time, everytime.

Quality Certifications: AS 9100D, ISO 9001:2015 • IPC-A-610, J-STD-001 • IPC-620 • ITAR
Service Categories: Stampings - Deep Drawn Shells • Hydroforming • Assemblies - Mechanical • Brazing - Aluminum Dip

Deep drawn & Hydroformed Enclosures; plus Aluminum Dip Brazing. SECONDARY OPERATIONS: CNC Machining, Anodizing, Iriditing, Painting (Powder Coat & Wet), Piercing/Forming, Welding, Light Assembly and Heat Treating. MATERIALS: Aluminum, Stainless, Brass, Copper, Hastelloy, Nickel, Steel & Specialty Metals. MARKETS SERVED - All.

Quality Certifications: MIL-I-45208A • ITAR REGISTERED
Service Categories: Waterjet Cutting - Metal • Laser Cutting • Cutting - Tube & Pipe • Coils • Materials - Metal & Non-Metal

Our massive in-house inventories allow us to respond quickly to large and small orders that support U.S. Navy Shipbuilding, Truck Tank Manufacturing, Stadium Seating, National Defense, Precision Machining and so much more. We offer Leveling, Water Jet Cutting, Slitting, Tube Laser Processing, Plate Burning, Saw Cutting, Drilling, Milling, and Blasting in Steel, and Alloys.

Quality Certifications: ANSI/ISO/ASQ 9001:2015
Service Categories: Assemblies - Electronic • Assemblies - Printed Circuit Boards • Assemblies - Electromechanical • Prototypes - Electronic • Assemblies - Electrical

Full service Electronics Contract Mfr. Electronics & electro-mechanical assemblies to customer specs, top quality workmanship at the lowest cost. Prototypes, small & medium production of surface mount technology, through hole & mixed technology. Highly skilled staff to assist in product development & product mfg. Deeply committed to customer service.

Quality Certifications: IPC-A-610F • IPC/WHMA-A-620 • ISO 13485 • J-STD-001
Service Categories: Metal Finishing - Plating • Metal Finishing - Anodizing • Metal Finishing - Precious Metal Plating • Metal Finishing - Electroless Nickel • Surface Finishing

We are the leading supplier of specialty metal finishing to specifications-driven industries. We provide quick, reliable, top-quality plating and anodizing across a broad range of substrate metals. AOTCO is NADCAP AC7004 accredited and follows a stringent quality control system that consistently delivers the highest quality standards with industry-leading lead times.

Service Categories: Nameplates, Dials & Panels • Labels, Tapes & Decals

Manufacturer of custom labels, nameplates, decals, panels, dials, tags, spacers and insulators. Long and short runs. Immediate delivery. Providing dependable, prompt, courteous service since 1963.

ARCOR LASER     Booth # 356
Service Categories: Lasers • Machining - Swiss Laser & CNC Swiss • Laser Cutting • Laser Machining - Micro • Machining - Miniature Precision

An ISO13485:2016, NADCAP, and AS9100 certified laser processing company. ARCOR specializes in the medical and aerospace markets offering laser-swiss turning, welding, cutting, marking, and drilling. We partner with our customers, from prototype to high volume production. We have in house tooling manufacture and can support simple or complex assembly design.

Quality Certifications: ISO 13485:2016 MEDICAL • AS 9100D ISO 9001:2015 • NADCAP CERTIFIED FOR WELDING • AC7004
ARC-TRONICS INC.     Booth # 148
Service Categories: Assemblies - Electronic • Assemblies - Electromechanical • Assemblies - Printed Circuit Boards • Assemblies - Turnkey • Prototypes - Electronic

We are a full-service Electronic Manufacturing Services (EMS) provider for turnkey products in printed circuit board assembly, cable/harness assembly, and complete box build or higher level integration. The company is ISO 9001:2015, ISO 13485:2016, and AS910:2016 certified. Arc-Tronics is also an ITAR registered company.

Quality Certifications: ISO 9001:2015 • AS 9100 REV D • ITAR • ISO 13485:2016
ARGO EMS     Booth # 347
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Electronic • Assemblies - Circuits • Assemblies - Turnkey • Assemblies - Electrical

What do you need built today? We can build your Surface Mount Technology (SMT), Custom Hybrid Chip on Board (COB), and Plated Through Hole (PTH) Printed Circuit Boards (PCBs.) Chip technology down to 01005, BGA technology up to 74mm x 74mm, down to 0.2mm pitch. ISO 9001/AS9100 certified.

Quality Certifications: AS9100D (AEROSPACE) • ISO 9001:2015 • IPC 610 • ITAR, RoHS
Service Categories: Metal Finishing - Chrome Plating • Metal Finishing - Plating • Metal Finishing - Electroplating • Surface Finishing • Surface Treatment

Our process is truly unique and is used in applications from everyday machine parts to very complex ones like the Cassini Huygens unmanned spacecraft sent to the planet Saturn. Industries Served by Armoloy of Connecticut – Aerospace, Nuclear, Automotive, Medical Devices, Automation, Food Processing, Contract Packaging, Plastic and Rubber Molding, Robotics, and more. Please visit and contact us today!

Quality Certifications: AS 9100D • NADCAP ACCREDITED
Service Categories: Castings - Plaster Mold • Castings - Graphite Mold • Machining - Castings • Plastics - Reaction Injection Molding • Prototypes - Rapid Casting

An industry leader in providing prototype/short run machined aluminum castings, & Reaction Injection Molded parts for over 50 years. Full in-house capability including: DFM support, Tooling, Foundry (Plaster, Precision Airset Sand, One Shot Tool-less, Graphite Die), RIM Molding, CNC Machining, Paint & Finishes.

Quality Certifications: ISO 9001:2015 • AS 9100 REV D • ITAR
ASCO SINTERING CO.     Booth # 306
Service Categories: Powder Metal Parts • Gears • Valves & Controls • Assemblies • Copper - Materials

A contract manufacturer of Powder Metallurgy components offering highly engineered solutions since 1964. We offer new product development and/or cost reduction of existing parts. Materials at near full density and all MPIF materials. High temperature sintering and in-house tool design. Complete to print; serving all markets and automotive. Kanban/JIT ISO 9001:2015 Certified.

Quality Certifications: ANSI/ISO/ASQ 9001:2015 • ISO 9001:2015
BADGER TAG & LABEL CORP.     Booth # 308
Service Categories: Tags - Custom • Labels, Tapes & Decals • Bar Coding • Panels - Control • Nameplates, Dials & Panels

Custom and blank tags and labels in quantities from one to millions. Also digital printing and plotter diecutting for short run and specialty projects. Full service from initial design through final delivery of tags and labels.

BARE BOARD GROUP     Booth # 116
Service Categories: Fabricating - Printed Circuit Boards • Printed Circuit Boards - Aluminum Clad • Circuits - Flexible • Prototypes - Fabrication • Prototypes - Electronic

Prototype through production, BBG is dedicated to providing quality PCB's built domestically & offshore. Rigid, Rigid Flex, Flex & Metal Clad PCB's. ITAR Registered (Domestic & Offshore), Military and Aerospace production. Specializing in RF; Medical; LED Lighting, Automotive and ITAR applications. BBG is also WEE, UL and RoHS Compliant and a Minority Business Enterprise.

Quality Certifications: ITAR • ISO 9001:2008 • TS 16949 • ISO 14001
Service Categories: Castings - Permanent Mold • Castings - Aluminum • Castings - Zinc

Aluminum & zinc castings, engineering assistance, in-house tooling, machining & assembly. Castings from a few ounces to 80 lbs. Quantities from 500 to 150,000.

Quality Certifications: ISO 9001:2008
BEAD ELECTRONICS     Booth # 460
Service Categories: Electronic Components • Tubular Parts - Die Swaged • Electronics - New Product Development • Cold Forming • Electronic Hardware

Manufactures custom metal interconnect components for high-tech automotive, datacom, connector, medical and aerospace applications. We also support a wide range of industrial controls, security and specialty lighting products.

Quality Certifications: ISO 9001:2015
BEST GLOBAL SOURCE     Booth # 448
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Electromechanical • Prototypes - Electronic • Coatings - Conformal

An ISO9001/AS9100 certified contract manufacturer that specializes in Printed Circuit Board Assemblies and Electro-Mechanical Box-Builds. Best Global Source provides cost effective manufacturing conforming to customer and IPC (Class 2 and 3) requirements. BGS can assist through concept, turnkey prototyping and volume production.

Quality Certifications: AS 9100 ISO 9000 • AS 9100D, ISO 9001:2015
BREWSTER WASHERS     Booth # 373
Service Categories: Stampings - Shims • Gaskets, Seals, Washers & O-rings • EDM - Wire • Prototypes - Stamping • Stampings - Micro-Miniature

We are a fourth generation custom precision parts manufacturer of washers, shims, discs and flat EDM parts. Our company celebrated its 100th Anniversary in March, 2019! All parts are manufactured in our Fairfield, NJ plant with American or DFARs compliant materials. We are ISO 9001 certified and working towards our AS9100 certification.

Quality Certifications: ISO 9001 • DOD REGISTERED • CAGE CODE: 08555
Service Categories: Switches - Membrane • Labels, Tapes & Decals • Screen Printing • Nameplates, Dials & Panels • Prototypes - Electronic

For over 25 years Butler Technologies has been providing screen/digitally printed Membrane Switches, Overlays & Labels. Additional products and processes include printed electronic components, dials & gauges, rubber keypads & laser cutting service. Please ask about our Rapid Prototype Program.

Quality Certifications: ISO 9001 • UL APPROVED • ITAR • CSA APPROVED
C & A MACHINE CO. INC.     Booth # 313
Service Categories: Bearings • Screw Machining - Multi Spindle • Machining - Precision CNC • Threaded Parts

Precision turned products for aerospace, automotive, bearings and industrial applications. Multi-spindle screw machining. CNC turning including hard turning. Surface finished to 4 micro. ISO 9001:2015

Quality Certifications: ISO 9001:2015 CERTIFIED
Service Categories: Wire & Cable Harnesses • Plastics - Injection Molding • Panels - Control • Assemblies - Electronic • Assemblies - Printed Circuit Boards

Manufacturer of WIRE HARNESS, CABLING, INJECTION MOLDING and ELECTROMECHANICAL ASSEMBLY. Prototype to production volume of ASSEMBLY HARNESSES, INJECTION MOLDING, HOT STAMP AND DECORATIVE PLASTICS; BOX BUILDS, miniature harness assemblies, coil cord, custom over molding. Ohio & Pennsylvania locations. For quote or inquiry, email

Quality Certifications: ITAR • IPC 610 / 620 • UL RECOGNIZED
Service Categories: Fabricating - Sheet Metal • Fabricating - Heavy Steel & Plate • Machining • Special Machinery - Design, Build & Rebuild • Engineering & Technical Services

Custom Machinery, OEM equipment. Metal Fabrication; Sheet Metal - Heavy Gauge (Carbon Steel, all grades of Stainless, exotic alloys). ASME Code Welding, Build-to-Print or Design & Build. Electrical Systems and Control Panels. Precision Machining, Pressure Vessels & Piping. Field Installation, Reverse Engineering, Contract Engineering, Design Analysis, Drawing Packages & Project Management.

Quality Certifications: ASME U, PP, R STAMPS • AWS • NACE • ITAR
CAMM METALS INC.     Booth # 457
Service Categories: Fabricating - Sheet Metal • Laser Cutting • Waterjet Cutting - Metal • Welding & Weldments • Machining - CNC Milling & Turning

We are a full-service metal Fabrication and Machining company focused on Sheet, Plate and Tube fabrication, CNC Machining and Welding of everything from small parts and components to assemblies and commercial products for OEM and Commercial customers. We have in-house 2D & 3D CAD, Laser, Waterjet, Forming, Sawcutting, Machining, PEM Installation and Welding.

CAPLUGS      Booth # 238
Service Categories: Plastics - Injection Molding • Plastics - Extruded Profiles • Die-Cutting • Tooling

A worldwide leader in product protection for over 70 years. We specialize in six different molding processes allowing us to offer a variety of design and material options. Our catalog highlights 15,000+ parts in stock and ready to ship. If a part doesn't meet your requirements, our team of engineers will work with you to design exactly what is needed.

Quality Certifications: ISO 9001 • IATF 16949 • ISO 13485 • ISO 14001
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Electromechanical • Assemblies - Electronic • Cable & Wire Manufacturing • Surface Mount Technology - Assembly

We are a New England based EMS provider for electronic Printed Circuit Board assemblies, electro-mechanical box builds and custom cable assemblies since 1994. CIC’s capabilities include high mix, prototype-high volume production runs, SMT and TH assembly, dock-to-stock, inventory management programs, in-house testing, and robotic conformal coating.

Quality Certifications: ISO 9001 • ISO 13485 • AS 9100 • ITAR REGISTERED
CENTURY-TYWOOD MFG.     Booth # 303
Service Categories: Fabricating - Sheet Metal • Fabricating - Stainless Steel • Roll Forming • Stampings - Ferrous & Non Ferrous • Assemblies - Electromechanical

Sheet Metal Fabrication, Metal Stampings, Specialty Wire Mesh & Screen Punching, Roll Forming, Welding (TIG, MIG, SPOT), Soldering, Wire EDM, and Value added electro-mechanical assembly in a clean room environment.

Quality Certifications: ISO 9001:2015 • ITAR
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Plastics - Two Shot Injection Molding • Engineering & Technical Services • Tooling - Plastic Injection Molding

Primarily providing Plastic Injection Molding and Tooling services, but with extensive capabilities in prototyping, engineering, design, and material handling, Chenango Valley Technologies has become a one-stop-shop for entire commercial projects. Operating exclusively in the US, we are able to take complete responsibility for every step of our process.

CIMQUEST INC.     Booth # 325
Service Categories: 3D Printing • Rapid Prototyping - Equipment • Reverse Engineering • Inspection Services • CAD/CAM Software

We are a leading resource for 3D printing, Reverse Engineering, and CNC programming based in Branchburg, NJ. Serving the East Coast since 1990, we help equip companies (small and large) with tools for product development, manufacturing, and final part inspection. With a diverse staff of machinists, engineers, and technicians, Cimquest understands the latest technology and will direct companies to the best solution even if it's not our own. 3D Printing hardware and services include HP Multi Jet Fusion and Desktop Metal solutions.

Service Categories: Printed Circuit Boards - Aluminum Clad • Rapid Prototyping • Assemblies - Circuits

A premier manufacturer of Rigid Flex, Flex, Rigid HDI PCB's, RF microwave boards utilizing all microwave materials. Cirexx also has in-house prototype assembly. Cirexx has engineering expertise from concept of product to a finished PCBA.

Quality Certifications: ANSI/ISO/ASQ 9001:2015 • AS 9100 • J-STD-001 • IPC-A-600/610 Certified
CLASSIC COIL CO.     Booth # 341
Service Categories: Electronic Components • Assemblies - Electromechanical • Motion Control • Prototypes - Electronic

Contract manufacturer of electro-magnetic coils and assemblies. We specialize in the Aerospace, Industrial, Medical and Consumer Electronics industries. We have dedicated engineering services: prototyping, professional quoting, sample to production expertise.

Quality Certifications: ISO 9001:2015
COMCO PLASTICS INC.     Booth # 437
Service Categories: Plastics - CNC Machining • Plastics - Screw Machining • Fabricating - Plastic • Plastics - Thermoforming/Vacuum Forming • Assemblies

American Born. Global Leaders. World Class Service. We specialize in High Quality, Precision Machined & Fabricated High Performance Plastic Parts servicing a Multitude of Global Industries. Comco Plastics is an ISO 9001 & ISO 13485 Certified plastics parts manufacturer located in New York established in 1956.

Quality Certifications: ISO 9001 • ISO 13485
Service Categories: Stampings - Metal • Stampings - Progressive Die • Tooling • Machining - CNC Milling & Turning • EDM - Wire

Specializing in low, medium and high volume metal stampings for the commercial, medical and aerospace industries. We are designers and builders of progressive dies, general tooling, fixtures and gages. Other services we also offer are CNC machining, jig grinding, Wire EDM and conventional EDM.

Quality Certifications: ISO 9001:2015 • ITAR REGISTERED • DDTC Registered
Service Categories: Fasteners • Gaskets, Seals, Washers & O-rings • Electronic Hardware • Electronic Components • Levers, Knobs & Handles

A full line Fastener and Electronic Component Distributor. We are experts in sourcing hard to find and custom parts. CFM has relationships with over 800 mfg's and can bring value to our customers by providing competitive pricing and high service levels. We are able to quote most hardware requirements on our customer's BOM and ship exact quantities as required.

Service Categories: Stampings - Deep Drawn Shells • Stampings - Short Run • Stampings - Metal • Stampings - Ferrous & Non Ferrous • EDM

Deep drawing specialist in a wide range of metals based on customers' supplied drawings. All required tooling is built and tested on site. We supply small to medium production runs to the high voltage power & X-ray tube manufacturers; as well as components for aerospace and other industries.

Quality Certifications: AS 9100D • ISO 9001:2015 • ITAR REGISTERED
Service Categories: Materials - Plastic • Plastics - Compounds • Plastics - Injection Molding • Plastics - Low Volume • Plastics - Raw Materials

We are a global specialty thermoplastics distributor, formulator, and compounder offering the broadest portfolio of high-performance resins and custom compounds. Our highly focused approach within strategic vertical markets allows us to offer our expertise and form partnerships with OEMs to solve problems, develop new applications, and introduce the latest polymerics technologies.

Service Categories: Metal Finishing - Painting • Plastics - Painting • Shielding - EMI/RFI • Powder Coating • Pad Printing

Contract production painting (Metal/Plastics) - Powder, Liquid, CARC, Teflon, and EMI/RFI Shielding. Chemical pre-treatment including RoHS Chromate, Blasting, Pad Printing, Silk-Screening, Mask Making, High-Bake capability and Blister Packaging.

Quality Certifications: ISO 9001:2015 • CONTROL PLANS • FEMA • FLOW CHARTS - SPC
Service Categories: Stampings - Progressive Die • Springs - Coil • Springs - Flat • Stampings - Fineblanked • Wire Forming & Fabricating

We are an advanced manufacturing company specializing in precision metal stampings, metal-forms and custom springs. CSS serves OEMs and contract manufacturers in medical, aerospace, electronics, automotive, defense, consumer and other industries. Headquartered in Farmington CT, we manufacture in the USA and worldwide to support our global customers. In business since 1939.

Quality Certifications: AS 9100D, ISO 9001:2015 • ISO 13485:2016 • Federal Firearms Licensed
CW THOMAS      Booth # 259
Service Categories: Plastics - Thermoforming/Vacuum Forming • Plastics - Pressure Forming • Plastics - Low Volume • Prototypes - Plastic • Plastic Cabinets & Enclosures

For over 70 Years CW Thomas has been producing highly engineered plastic parts and assemblies, delivered when needed to our customers, and at fair and reasonable prices. We have an established reputation as an industry leader in expanding the viability of the thermoforming processes of Vacuum and Pressure forming.

Quality Certifications: ISO 9001:2008 • AS 9100C
DA/PRO RUBBER INC.     Booth # 114
Service Categories: Rubber Molding • Plastics - Injection Molding • Silicone / Rubber - Liquid Injection Molding • Rubber To Metal Bonding • Rubber - Compression Molding

5 facilities for compression/injection molding - high-quality custom rubber, TPE, & plastic components molded to precision tolerances such as diaphragms, seals, connectors, molded shapes, rubber to metal parts for medical device, electronic & aerospace industries. Class 10,000 cleanroom - chemists & engineers assist in optimal moldability.

Quality Certifications: ISO 9001
Service Categories: Screw Machining - Swiss/CNC Swiss • Screw Machining - Multi Spindle • Machining - Precision CNC • Machining - CNC Milling & Turning • Assemblies

We deliver custom high and low complexity parts for critical components and sub-assemblies for OEMs in the northeast and beyond. When precision is non-negotiable, our CNC Swiss and CNC Multi Axis machines provide accuracy and consistency for both low and high volume runs.

Quality Certifications: ISO 9001:2008
Service Categories: Machining - Swiss Laser & CNC Swiss • Laser Engraving • Machining - Precision CNC • Machining

A Precision Swiss/Larger diameter turning CNC Machine Shop, tailored to many industries such as firearms, fiber-optics, medical, defense, photonics, telecommunications, and automotive to name a few. Prototype or production runs in any quantity from 5 to 5,000,000 pieces can be accommodated.

Quality Certifications: ISO 9001:2015 • ITAR
DESIGN-2-PART MEDIA     Booth # 000
Service Categories: Publications

Published since 1984, Design-2-Part Magazine is one of the country's oldest publications specifically devoted to showcasing manufacturing companies who specialize in helping OEM's take their product from design to part.

Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Electromechanical • Lighting - Electroluminescent • Assemblies - Turnkey • Electronic Encapsulations

New England Electronic Contract Manufacturing - SMT, PCB and Flex Circuit Assembly/Electromechanical Assembly. Industries served include: Military, Medical, Industrial, LED Lighting, Clean Technology and Robotics. Additional services include ICT, Functional Testing, Flying Probe Test. We also offer order fulfillment and warranty repair.

Quality Certifications: ISO 9001:2008 • ISO 13485:2003 • CSA LISTED, UL RECOGNIZED • IPC-610A
ECK PLASTIC ARTS     Booth # 449
Service Categories: Plastics - Injection Molding • Plastics - Insert Injection Molding • Plastics - Thermoforming/Vacuum Forming • Plastics - CNC Machining • Assemblies

We produce quality made plastic parts for original equipment manufacturers. Established in 1949, we maintain an unbreakable commitment to our employees, customers and community. Eck Plastic Arts' high caliber parts are made on time, defining why our partnerships with our loyal customers are strong and consistent. We are an ever-growing business and pride ourselves on our ability to provide a personal touch with the attention to detail a small business can supply. No matter the size of the order, our customers receive excellent customer service and the highest quality products available.

Service Categories: Engineering & Technical Services • Automation • Prototypes - Electromechanical • Instrumentation & Controls • Robotics

Provides engineering, design and prototyping services to commercial and government clients. We provide functional test systems, manufacturing automation and product development to clients in manufacturing, mass transit, robotics and defense industries. We are ITAR registered and BATF&E FFL/FEL/SOT.

EMKA INC.     Booth # 226
Service Categories: Assembly Hardware • Electronic Hardware • Hinges • Extrusions - Rubber • Gaskets, Seals, Washers & O-rings

A leading manufacturer of enclosure hardware. Products include handles, hinges, locks, latches, gasketing and accessories.

Quality Certifications: ISO 9001 • ISO 14001 • RoHS • UL APPROVED
Service Categories: Plastics - Thermoforming/Vacuum Forming • Plastics - Pressure Forming • Fabricating - Plastic

For 60 years Engineered Plastic Products has been custom thermoforming and fabricating all thermoplastic materials that include those with ESD and high temperature properties. Providing our customers services from prototype engineering to production assembly in low to mid-volume quantities.

EPILOG LASER     Booth # 110
Service Categories: Lasers • Laser Cutting • Laser Engraving • Laser Marking • Bar Coding

An industry leader in design of laser engraving, cutting & marking systems, manufacturers of the Epilog Zing, Mini, Helix, Fusion Pro, FiberMark, and G2 Galvo series of laser systems.

Quality Certifications: ANSI STANDARDS • IEC • CE • CFR 21
ETEMCO     Booth # 218
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Electronic • Assemblies - Electromechanical • Coatings - Conformal • Prototypes - Electronic

An ISO-9001:2015 Certified Contract Electronic Manufacturer specializing in electronic and electro-mechanical assembly, sub-assembly, system assembly, and conformal coating. We excel at complex RoHS or lead based surface mount, through hole, and mixed technology PCB assemblies. Our customer-focused culture is evident in our superior quality and customer service.

Quality Certifications: ISO 9001:2015 • IPC A-610D CLASS 2&3 • J-STD-001 • UL LISTED
Service Categories: Machining - CNC Milling & Turning • Screw Machining - Swiss/CNC Swiss • Screw Machining - Multi Spindle • Rapid Prototyping • Assemblies

Serving OEM companies for over 74 years, supplying them with carefully-engineered, precision machined parts and assemblies that are delivered on-time at very attractive prices. Our employees really excel at making your parts right the first time and they can offer valuable advice for further cost reductions!

Quality Certifications: ISO 9001:2015
FISHER UNITECH     Booth # 202
Service Categories: 3D Printing • Rapid Prototyping • CAD/CAM Software • Prototypes - Models • CAD/CAM Training

We are changing the way companies innovate and create new products. Fisher Unitech is one of the world’s largest technology providers of 3D design software tools and 3D printers. We are on the cutting edge of a changing and explosive technology. We make innovation possible and help to advance manufacturing with our solutions.

Service Categories: Gaskets, Seals, Washers & O-rings • Rubber Molding • Prototypes - Rubber • Extrusions - Rubber

For over 60 years, we have consistently provided superior technical solutions specializing in O-rings, seals, custom PTFE and molded shapes with the lowest total cost of ownership. Creating competitive advantages for our customers in their products and markets is what makes Gallagher "The Seal Specialist". 2nd location: 136 Denslow Rd, East Longmeadow, MA, Ph: 413-525-5555

Quality Certifications: ISO 9001:2008 • ISO 14001-2004
GEMCO MFG. CO. INC.     Booth # 255
Service Categories: Stampings - Metal • Stampings - Fourslide • Stampings - Progressive Die • Stampings - High Volume • Stampings - Ferrous & Non Ferrous

RESPONSIVE – EXPERIENCED – RELIABLE! For 75 years, Gemco has been a leader in the manufacture of custom precision metal stampings and wire forms serving the automotive, aerospace, telecommunications, appliance, medical and lighting industries. Looking to partner with a “low maintenance” vendor? Give Gemco the opportunity to earn your business.

Quality Certifications: ISO 9001:2015
Service Categories: Springs - Coil • Wire Forming & Fabricating • Springs - Flat • Assemblies - Mechanical

We are a leading manufacturer of precision springs & wire forms in small & large quantities from a wide range of materials. We have one of the largest wire ranges in the spring industry. In-house design engineering painting, bar coding, shot peening & assembly are all available. We routinely handle rush deliveries.

Service Categories: Fabricating - Printed Circuit Boards • Printed Circuit Boards - Aluminum Clad • Circuits - Flexible • Assemblies - Printed Circuit Boards • Assemblies

Supplying a wide variety of industries with high quality printed circuit boards for over 40 years. Geometric Circuits has multiple manufacturing facilities throughout the United States and worldwide. We are certified to ISO 9001: 2015, TS, ITAR to provide a strong foundation and the necessary resources to implement ongoing quality improvements.

Quality Certifications: ISO 9001:2015 • ISO/TS 16942:2009 • ITAR • ISO 14001
GOPROTO INC.     Booth # 301
Service Categories: 3D Printing • Machining • Tooling - Plastic Injection Molding • Tooling - Casting • Prototypes - Models

Delivering turnkey plastic and metal part manufacturing solutions including industrial design model making, rapid prototyping, additive manufacturing, cast urethane, CNC machining, rapid sheet metal, rapid injection tooling, production parts (injection molding, stamping, die-cast, sheet metal), and part finishing to complete your product.

Quality Certifications: ISO 9001
GPC ELECTRONICS     Booth # 121
Service Categories: Assemblies - Electronic • Assemblies - Turnkey • Wire & Cable Harnesses • Surface Mount Technology - Assembly • Assemblies - Printed Circuit Boards

Since our inception in 1985, we've had a track record of working with leading OEMs in North America, Europe, Asia & the Pacific. We are able to customize processes, delivering unique solutions to our customers, providing them with a competitive advantage & positive outcomes. We are a full service EMS and cable harness provider with four manufacturing sites globally.

Quality Certifications: ISO 9001:2015, AS 9100 • ISO 14001:2015 • ISO 13485:2016 • IATF 16949:2016
GREENE RUBBER CO. INC.     Booth # 144
Service Categories: Rubber Fabrication • Rubber Molding • Rubber - Transfer Molding • Silicone / Rubber - Liquid Injection Molding

Custom rubber gaskets & seals. Custom rubber molding, LSR, vibration isolation, rubber-to-metal bonding, Chomerics EMI & Thermal materials, Rogers Poron Urethane Foams, 3M Adhesives, Parker O-Rings, St. Gobain tubing and Panasonic PGS.

Quality Certifications: ISO 9001:2015 • AS9100D
GREENLIGHT MFG.     Booth # 433
Service Categories: Assemblies - Electronic • Assemblies - Electromechanical • Assemblies - Printed Circuit Boards • Assemblies - Turnkey

A Woman Owned, full-service Contract Manufacturer founded in 2008 and dedicated to the production of quality Electronic and Electro-Mechanical assemblies. Green Light Manufacturing's Niche is Low to Medium volume, High Mix PCB manufacturing of Surface Mount, Plated Thru-Hole assemblies with a Focus on Rapid High Tech Prototype Services.

HARBOR CASTINGS     Booth # 234
Service Categories: Castings - Investment • Castings - Non-Ferrous

A ferrous and non-ferrous investment castings company. Offering services to a diverse group of customers. Our customers include working with the aerospace industry, military, defense, transportation, air and hand tools, oil field, medical, valve and pump, door hardware, gun and food industries – to name a few.

Quality Certifications: ISO 9001:2015 • AS 9100D
Service Categories: Castings - Aluminum • Castings - Sand & Shell • Castings - Sand

We are a leader in the production of aluminum castings. We are an ITAR compliant and AS9100 Certified facility. Our V-process delivers tight tolerances, thin walls and excellent surface finish. Further we're able to bring your project from model to production in just three weeks.

Quality Certifications: ISO 9001:2015 • AS 9100 REV D
HAYDEN CORP.     Booth # 406
Service Categories: Coatings - Thermal Spray/Plasma/HVOF

Provider of thermal spray coatings and other wear and corrosion control surfaces, providing comprehensive pre-surfacing and post-surfacing services including preparatory machining, finish grinding and metallurgical coating quality analysis. We focus on flexibility and strive to meet a broad range of coating requirements with high-quality surfaces and the fastest possible delivery.

Quality Certifications: AS 9100 ISO 9000 • A.S.M.E. CERTIFIED
Service Categories: Fabricating - Sheet Metal • Assemblies - Electromechanical • Assemblies - Mechanical • Metal Cabinets & Enclosures • Prototypes - Rapid Sheet Metal

Precision Sheet Metal Fabricator with core competencies that include, but are not limited to Design Engineering input up to any level a customer desires, fabrication, finish, and electrical / mechanical assembly up to any level a customer would desire. We offer quick turn prototype, pre-production, and production support up to and including Kanban / JIT programs.

Quality Certifications: ISO 9001:2008 • ITAR • RoHS • UL CERTIFIED
Service Categories: Assemblies - Cable • Assemblies - Turnkey • Cable & Wire Manufacturing

Extrudes and assembles high-performance RF microwave coaxial cable from 16 to 52 AWG. High Speed Interconnects low-loss, low-capacitance, phase-stable, coaxial interconnect solutions are available in a variety of cable constructions, which include circular and micro coaxial connector terminations down to 0.3 mm pitch, fine wire, and direct-to-board terminations.

Quality Certifications: ISO 9001:2008 • AS 9100D
HJM PRECISION INC.     Booth # 429
Service Categories: Quality Control • Measurement & Inspection • Calibration & Metrology • Gaging - Custom Engineered • Mechanical & Electronic Design

Over 35 years of experience and product knowledge in the field of Metrology. Utilizing this knowledge and experience, we strive to provide service and technical support to work with our customers in solving their problems. Our commitment is to provide the application engineering, training factory interface and service we as a company can provide.

Quality Certifications: A2LA ACCREDITED
Service Categories: Electronic Components • Assemblies - Circuits • Assembly Hardware • Manufacturing Association • Switches - Electrical

We are the premier independent, stocking distributor of electronic components. As a WOSB Certified and ISO Certified business, HMB Electronics truly prides ourselves in our extensive and growing selection of board level devices ranging from cutting edge, military technology, EOL, hard to find, and obsolete products.

Quality Certifications: ANSI/ISO/ASQ 9001:2015 • WOSB • ANS ESD S20.20
HOFFMAN MFG. INC.     Booth # 326
Service Categories: Fabricating - Sheet Metal • Welding & Weldments • Machining - Conventional CNC • Welding - Robotic • Laser Cutting

Precision sheet metal fabrication shop. CNC punching & forming. Full welding capabilities include robotic welding, spot welding, Mig & Tig welding & laser cutting. Powder coating services available.

HOLTS PRECISION     Booth # 441
Service Categories: Metrology - Equipment & Services • Inspection Services • Measurement & Inspection • Measurement - Equipment • Quality Control

One of the oldest Calibration, Gage Repair, Gage Sales & Contract Inspection companies in the world. HOLTS Precision Inc. Offers New & Refurbished CMMs, Gage Sales, Gage Calibration, Hand Tool Repairs & Part Inspections to New England Manufacturers & Businesses. Our talented staff at our South Windsor, CT, Nashua, NH & West Bridgewater, MA facilities are equipped to perform repairs & calibrations on all major brands of gaging equipment.

Quality Certifications: ISO 17025 (Calibration) • ISO 17025
HOWELL PLASTICS     Booth # 269
Service Categories: Plastics - Thermoforming/Vacuum Forming • Packaging • Material Handling • Plastics - Pressure Forming • Plastics - CNC Machining

Specializing in design, tooling & manufacturing of both thin & heavy gage products such as material handling trays, custom enclosures, OEM components, blisters, clamshells & medical device packaging. We use a wide variety of materials including GP-ABS, HDPE, PETG, HIPS & PVC in material thicknesses ranging from 0.010" - 0.500".

HP     Booth # 241
Service Categories: 3D Printing

We create technology that makes life better for everyone, everywhere. Through HP's product and service portfolio of personal systems, printers, and 3D printing solutions, we engineer experiences that amaze. More information about HP Inc. is available at

Service Categories: Extrusions - Plastic • Plastics - Extruded Profiles • Plastics - Thermoset Extrusion

We are a custom plastic profile extrusion company with over 42 years servicing OEMs and many Fortune 500 companies. We offer an impressive array of engineered polymers, producing profiles from a 1/16" up to a 5" envelope within a wide range of geometries. Secondary and inline printing capabilities. In-house tooling and design capabilities offer responsive lead times.

HTF     Booth # 153
Service Categories: Fasteners • Electronic Hardware • Threaded Parts • Grommets • Assembly Hardware

Authorized stocking distributor for 60 leading fastener & component lines. Products include PEM, Southco, circuit board hardware & accessories, threaded inserts for plastics, cable components, adhesives & tapes, commercial & military hardware, installation tools, grommets, grommet edging, gaskets, extrusions, seals trim, fiber management, cable sleeving and wraps.

Quality Certifications: ISO 9001:2000 • MIL-I-45208A
Service Categories: Extrusions - Aluminum • Fabricating - Aluminum Extrusions • Aluminum - Materials • Heat Sinks • Machining - Aluminum

The world’s largest aluminum extrusion company, Hydro is the North American leader in common alloy extruded aluminum products. From raw aluminum to assembled products, we offer the industry’s broadest product capabilities in press sizes and tonnages (direct and indirect extrusion), alloy selection, circle sizes, and profile types.

Service Categories: Tube Bending & Fabricating • Laser Cutting • Cutting - Tube & Pipe • Welding & Weldments • Powder Coating

We are experts in tube bending & fabrication, providing innovative quality products & services. From robotic welding, to powder coat painting to LASER TUBE CUTTING to 12" diameter, our customers use our many services to get assemblies done well & done right. Ask us about our 5 axis laser. For a quote call Tim @ 919-258-3070.

Quality Certifications: ASTM - SAE • METRIC - JIS • CE AWS • ISO 9001-2000
ICAPE GROUP     Booth # 310
Service Categories: Printed Circuit Boards - Aluminum Clad • Circuits - Flexible • Assemblies • Assemblies - Cable • Assemblies - Electromechanical

PCB, PCB Assembly and custom made electronic part manufacturer.

Quality Certifications: ISO 9001:2008 • ISO/TS 16949 • IPC
Service Categories: Assemblies - Printed Circuit Boards • Electronics - New Product Development • Surface Mount Technology - Assembly • Engineering & Technical Services • Prototypes - Electronic

US-based contract manufacturing, electronics engineering, and product development for medical, industrial, military, and consumer products. We can accommodate surface mount and through-hole PCB assemblies of any size, and manufacture oversized LED boards up to 5FT long.

Quality Certifications: IPC-A-610 CLASS 2 & 3 • UL RECOGNIZED, RoHS
INCERTEC     Booth # 357
Service Categories: Metal Finishing - Anodizing • Metal Finishing - Electroplating • Metal Finishing - Precious Metal Plating • Metal Finishing - Passivating • Metal Finishing - Selective Plating

We are among the largest NADCAP Accredited plating and metal finishing companies in America. Incertec has approvals from many of the world’s biggest names in the fields of aerospace, medical devices and electronics. Certifications: ISO 9001, AS9100, ITAR, RoHS Compliant, Federal Firearms License.

Quality Certifications: NADCAP ACCREDITED • AS9100 REV C • ISO 9001:2000 • ITAR, NADCAP
Service Categories: Rapid Prototyping • Plastics - Injection Molding • Molds & Moldmaking - Plastic • Prototypes - Plastic • Urethanes - Molded/Extruded

IMPM is a service bureau specializing in prototyping, product development, and low volume production. Our competencies include 3D printing (SLA), silicone tooling and cast urethane parts (Home of the 100-shot guarantee), aluminum/p20 injection tooling and injection molding. Let IMPM set the standard.

Service Categories: Ceramic Parts • Machining - Ceramics • Grinding - Ceramics • Ceramics - Metallizing & Plating • Prototypes - Machining

A leading manufacturer & fabricator of technical ceramic materials & machinable thermo-plastics. We offer engineering assistance during the prototype process through to production. We specialize in unique geometries made from high quality advanced materials. Competitive pricing with quick deliveries. Materials include Alumina Oxide, Boron Nitride, Macor™, Zirconia, PEEK, Ultem & More!

Service Categories: 3D Printing • Rapid Prototyping - Equipment • Rapid Prototyping • Castings - Rubber Mold • Urethanes - Molded/Extruded

InterPRO provides additive manufacturing services and systems that help companies solve their product design, engineering, prototyping and manufacturing challenges. The services we offer include 3D printing, low-volume molding, CNC, model making, design support and training. As an authorized reseller of HP Jet Fusion 3D printers, InterPRO helps companies optimize their in-house engineering, prototyping and manufacturing operations with 100% digital Jet Fusion 3D printing.

Quality Certifications: ITAR
Service Categories: Screw Machining - Swiss/CNC Swiss • Screw Machining - Escomatics • Machining - Miniature Precision

Precision machined components to 1.125" diameter. Complete secondary including: thread rolling, knurling, milling, tapping, drilling and slotting. For a Quote, email David at

Quality Certifications: ISO 9001:2015
K & S PRECISION METALS     Booth # 260
Service Categories: Tubing - Cold Drawn • Cutting - Tube & Pipe • Drilling & Tapping

Providing high quality brass, aluminum & copper tubing, rod, strips & sheets. Secondary operations include cut to length, draw to size, milling, tapping & threading. Low minimums & quick delivery.

Service Categories: Assemblies - Electromechanical • Assemblies - Mechanical • Assemblies - Turnkey • Fabricating - Sheet Metal • Special Machinery - Design, Build & Rebuild

As a diverse & highly capable contract manufacturer that provides a wide array of manufacturing services, Kalow has built a solid reputation of responding quickly & personally to help our customers achieve their goals. Our experienced team & detailed processes continue to result in dependable quality. We are also CSA Recognized. Like our motto says: "Tell us what you need - we'll make it happen."

Quality Certifications: CE • ETL • UL508a CERTIFIED • ITAR, ISO 9001:2015, TUV
KIMCHUK INC.     Booth # 323
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Electronic • Engineering & Technical Services • Assemblies - Turnkey • Electronics - New Product Development

A Veteran Owned Small Business Electronic Manufacturing Services organization with a world class state-of-the-art facility, Kimchuk is a fast paced, technologically advanced, high product mix electronics firm specializing in Electronic and Electromechanical Contract Manufacturing Services and Engineering Services that is committed to excellence.

Quality Certifications: IPC-A-610D, IPC-J-STD • ISO 9001-2000 • AS 9100 • ITAR REGISTERED
Service Categories: Castings - Die, Zinc • Castings - Zinc • Castings - Die • Tooling - Casting • Castings - Non-Ferrous

Manufacturer of precision Zinc die-castings. Specializing in Four-Slide Tooling Technology. Tight tolerances, thin walls, internal cast threads, secondary machining, assembly, product protective finishes. We have a fully equipped, on-site tool shop, offering complete tool builds, repairs and maintenance. Please submit RFQs to:

Quality Certifications: ISO 9001:2015
Service Categories: Castings - Investment • Castings - Steel • Castings - Ferrous • Castings - 3D Printed

We manufacture investment castings from fractional ounces to 60 lbs. In-house capabilities include rapid prototyping, CNC machining, and NDT. We also provide heat treating and plating services.

LARSON TOOL & STAMPING CO.     Booth # 335
Service Categories: Stampings - Progressive Die • Stampings - Deep Drawn Shells • Stampings - High Volume • Brazing • Assemblies

Founded in 1920, Larson Tool is a 4th-generation, family-owned medium-to-high volume contract manufacturer specializing in deep draw and precision metal stamping. Complete in-house prototyping, process development, tool build, & production. Press capacity to 450 tons, bed size to 120" x 60", draw depths of up to 22". Assembly, welding, brazing, other value-added operations.

Quality Certifications: ISO 9001:2015
LEE SPRING     Booth # 261
Service Categories: Springs - Coil • Springs - Flat • Springs - Wave • Stampings - Fourslide

Springs in stock ready to ship or made to your specifications. Large selection of stock Compression, Extension, Torsion, HEFTY™ Die, REDUX™ Wave, LeeP™ Plastic Composite, MIL-SPEC, Belleville Washer, Battery and Constant Force Springs. Custom Springs, Stampings, Wire Forms and Fourslide design and manufacturing. Prototypes through large production runs.

Quality Certifications: ISO 9001 • RoHS, REACH • MIL SPEC AS24585 • MIL SPEC AS24586
MARKING SYSTEMS INC.     Booth # 204
Service Categories: Die-Cutting • Labels, Tapes & Decals • Laser Cutting • Adhesives • Fabricating - Foil, Films & Foams

MSI and MSDC serve all types of OEM companies in industries ranging from test and measurement, telecommunications, military, consumer electronics, medical and security to name a few.

Quality Certifications: ITAR • AS 9100D • ISO 9001:2015 • CSA & UL APPROVED
MARS PLASTICS     Booth # 469
Service Categories: Plastics - Injection Molding • Plastics - Hot Stamping & Screening • Assemblies • Plastics - Heat Sealing & Welding • Plastics - In Mold Labeling & Decorating

We are a family owned plastic injection molder with 40 molding machines ranging from 28 ton to 700. We have helped kick start numerous small ideas into industry leaders. The Mars team coached major corporations how to move unprofitable businesses from overseas to our facility so they could see major gains and return to profitability. We are a full service company. ISO Compliant.

MBI PLASTIC INC.     Booth # 428
Service Categories: Plastics - Injection Molding • Plastics - Insert Injection Molding • Fabricating - Plastic

A Canadian injection molding company which has been in business for close to 30 years. MBI Plastic can mold plastic parts in all kinds of material and we ship our client's products all over the world, including the United States. Not only can we deliver great quality parts right on time, but we also help our customers improving the design of their products and molds.

Quality Certifications: ISO 9001:2015 CERTIFIED
Service Categories: Fabricating - Sheet Metal • Stampings - Metal • Assemblies - Electromechanical • Welding - Robotic • Metal Finishing - Electroless Nickel

Our in-house capabilities include precision sheet metal fabrication, mechanical & electro-mechanical assemblies, low-high volume metal stamping, prototype design assistance & build, manual & robotic welding, high volume zinc & electroless nickel plating, and powder coat painting.

Quality Certifications: IATF 16949:2016
MERCURY CORP.     Booth # 254
Service Categories: Fabricating - Sheet Metal • Metal Cabinets & Enclosures • Assemblies - Turnkey • Fabricating - Aluminum • Fabricating - Stainless Steel

AN INTEGRATED SOLUTION TO YOUR SUPPLY CHAIN - we build custom racks, frames, enclosures, plastics & stamping assemblies. CORE PROCESSES: Design, Metal Fabrication, welding of all types of metals, Plastic Injection Molding, Finishing, Turn-Key Assemblies & KAN BAN.

Quality Certifications: ISO 9001:2008 • ISO 13485 • AS 9100 • ITAR REGISTERED
METALLON INC.     Booth # 219
Service Categories: Stampings - Metal • Stampings - High Volume • Stampings - Progressive Die • Stampings - Ferrous & Non Ferrous • Assemblies - Stamped

High volume precision stampings. Progressive dies run in presses up to 150 tons. Added value: welding, staking, tapping & assembly. Product design assistance, prototyping.

Quality Certifications: IATF 16949 • ISO 9001 • ISO 14001
MICRON CORP.     Booth # 430
Service Categories: Assemblies - Turnkey • Assemblies - Electrical • Assemblies - Electromechanical • Assemblies - Printed Circuit Boards • Electronics - New Product Development

Electronics contract manufacturer offering PCB and Electromechanical assembly services. Managing the opportunities and risks of electronics manufacturing for over 36 years. Our customer base branches out into the fields of actuation, communication, characterization, control, monitoring, maintenance, measurement, and reclamation.

Quality Certifications: ITAR REGISTERED • IPC
MINOR RUBBER CO. INC.     Booth # 102
Service Categories: Rubber Molding • Rubber - Injection Molding • Extrusions - Rubber • Rubber - Compression Molding • Rubber - Transfer Molding

Custom molders, extruders and dip molders of rubber products. Also extensive line of standard catalog items, such as grommets, bumpers, extruded profiles, isolators, bellows, etc. Most items are searchable online at

Quality Certifications: MIL-I-45208A
Service Categories: Metal Finishing - Anodizing • Metal Finishing - Alodining • Metal Finishing - Chromate • Metal Finishing - Hard Coating • Metal Finishing - Passivating

Quality, Integrity & Service are terms commonly used in our industry. At Modern Metal Finishing, these words are the definition of our business philosophy. Since our incorporation, over 30 years ago, we have continually grown. This growth has occurred because of our attention to detail and our commitment to meet customers' constantly changing needs. We also have our Federal Firearms License.

Quality Certifications: NADCAP ACCREDITED • ISO 9001:2015, ITAR APPROVED • MIL-A-8625 • DOD REGISTERED
Service Categories: Fabricating - Sheet Metal • Lasers • Welding - Robotic • Metal Finishing - Painting • CAD/CAM Software

We have excelled as one of the most successful Precision Fabricators in the industry, by providing excellent products and support to our customers. Vast industry experience & “State-of-the-Art” equipment make us a powerful resource. Our facility provides Design, CNC Punching, Laser Cutting, Forming, Robotic Welding, In-House Powder Coating, and Assembly.

Quality Certifications: ISO 9001:2015 • WELDING (AWS)
MUELLER CORP.     Booth # 435
Service Categories: Coatings • Plastic Coatings - EMI/RFI • Coatings - Physical Vapor Deposition • Coatings - Plastic • Plastics - Painting

Vacuum Metalizing, PVD sputtering, and spray coating services. Our coating services are utilized for EMI/RFI shielding, Reflective Coatings for LED lighting, Heat Shielding, Vapor Barriers, Conformal Coatings, Decorative Metalizing, PVD Chrome and Decorative Painting. Industries Served Include: Medical, Defense, Aerospace, Automotive, and Consumer Products.

Quality Certifications: ISO 9001 • AS 9100 • TS 16949 • ITAR