Northern California Design-2-Part Show
May 22 & 23, 2019
Santa Clara Convention Center • Santa Clara, CA



Search by Category

or

Search by Keywords


  Reset Search  



0 Exhibitors to Meet

Exhibitor List


Listed below are the current exhibitors and service categories of companies in the show.
This page is also an interactive tool for you to use when planning your personal visit.

[ 157 ] companies match your search.
FEATURED EXHIBITORS listed first alphabetically
3RD GEN MACHINE     Booth # 328
Service Categories: Machining - CNC Milling & Turning • Machining - Production • Machining - Precision CNC • Machining • Machining - Stainless Steel

3rd Gen Machine was founded by Evan Jones in 2007. Both his grandfather's and father's machine shops are still operational today as separate entities thriving in this industry. With over 100 years in the industry, 3rd Gen Machine can manage low volume to high volume production, prototype, reverse engineering, and has experience with both ferrous and non-ferrous alloys.

www.3rdgenmachine.com

Quality Certifications: ISO 9001 / AS 9100 • FEDERAL FIREARMS LICENSE - FFL • ITAR • LEAN MFG.
A & B DIE CASTING CORP.     Booth # 323
Service Categories: Castings - Die, Aluminum • Castings - Die, Zinc • Machining - Precision CNC • Assemblies - Mechanical

We supply fully finished and machined, short and medium run die cast components to customers world-wide. We offer a full range of services to provide components ready for assembly, combined with order fulfillment options to provide the flexibility you need to meet your customers' needs.

www.abdiecasting.com

Quality Certifications: ISO 9001:2008
ADRON TOOL CORP.     Booth # 118
Service Categories: EDM • EDM - Wire • EDM - Sinker • EDM - Small Hole Drilling • Machining - Production

Wire EDM specialists with over 55 CNC Wire EDM machines , CNC (sinker) std. EDM; largest capacity, 40"x32"x18", workpiece weight up to 10,000 lbs., 26-1/2" thick; metal parts rapid prototyping service and production runs of complex, contoured shapes in tough to machine or exotic material; CNC production machining, coord. measuring sys., SPC, OGP optical non-contact measuring.

www.adron.com

Quality Certifications: ISO 9001:2008 • AS 9100 • NADCAP AS7116
AK STAMPING COMPANY     Booth # 240
Service Categories: Stampings - High Volume • Stampings - Short Run • Stampings - Progressive Die • Stampings - Metal • Stampings - Fourslide

A leader in precision stamping technology providing engineering solutions, product design, development, production, & high volume manufacturing & assemblies.

www.akstamping.com

Quality Certifications: ISO 9000:2008
AMBRIT ENGINEERING CORP.     Booth # 407
Service Categories: Molds & Moldmaking - Plastic • Plastics - Injection Molding • Tooling - Plastic Injection Molding • Pad Printing • Conversion - Metal to Plastic

An ISO 9001:2015 and ISO 13485:2016 certified contract manufacturer, Ambrit Engineering Corp. has offered turn-key thermoplastic injection molding tooling systems, molded components, and assemblies internationally to the Healthcare, Aerospace, Commercial and Consumer markets for over 45 years.

www.ambritengineering.com

Quality Certifications: ISO 9001:2015 CERTIFIED • ISO 13485 CERTIFIED • ISO CLASS 8 CLEAN ENVIRONMENT • SPC
APPLE RUBBER PRODUCTS     Booth # 221
Service Categories: Gaskets, Seals, Washers & O-rings • Rubber Molding • Rubber To Metal Bonding • Silicone / Rubber - Liquid Injection Molding • Prototypes - Rubber

Manufacturer of elastomeric parts. O-Rings; MicrOrings to MacrOrings, AS568 & ISO 3601 (search inventory from our Website). We design & manufacture custom, rubber bonded to plastic, metal & filter materials, and medical rubber parts. Our services include engineering, design assistance & QC testing & reporting, from prototype to Production. Class 7 (10,000) clean room.

www.applerubber.com

Quality Certifications: ISO 9001 • AS 9100
ASH INDUSTRIES     Booth # 144
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Plastics - Rotational Molding • Plastics - Hot Stamping & Screening • Prototypes - Plastic

Engineered for You. In-House Thermoplastic, Silicone and Metal Injection Molding (MIM), Rotational Molding & Tooling as well as cast epoxy components & 7-Axis Swiss Lathe production. Molding includes custom inserts, over-molding and two shot molding. Component assembly, secondary processing & decorating, utilizing the latest in CNC, EDM & Modeling technology.

www.ashindustries.com

Quality Certifications: ISO 9001 • ISO 7 CLASS 10K CLEAN ROOM • ITAR REGISTERED
BOHN AND DAWSON     Booth # 422
Service Categories: Tube Bending & Fabricating • Welding - Robotic • Racks • Tubular Parts - Die Swaged

A High Volume Metal Tubing Fabricator, providing parts and welded assemblies for OEM Manufacturers in the Outdoor Power, Agricultural, Automotive, Furniture and Off Road Recreational Vehicle Market.

www.bdiweldedtubing.com

Quality Certifications: ISO 9001:2015
C & H ENTERPRISES     Booth # 402
Service Categories: Machining - CNC Milling & Turning • Machining - Multi Axis • Welding - TIG Aluminum • Welding - Robotic • Prototypes - Machining

A precision Machine shop with weld fabrication capabilities. We are ISO 9001 and AS9100 Certified. C&H Enterprises offers to its customers the highest quality precision machined parts and assemblies that are delivered on time, at competitive rates, by continuous improvement activities through Lean and Six Sigma.

www.candhenterprises.com

Quality Certifications: ISO 9001:2008 / AS9100-D • ITAR CERTIFIED
CENTRAL PLASTICS & MFG.     Booth # 424
Service Categories: Plastics - Injection Molding • Plastics - Insert Injection Molding • Plastics - Thermoforming/Vacuum Forming • Plastics - Micro Molding • Assemblies - Turnkey

One stop solution for all your Custom Plastics Injection Molding and Thermoforming needs. Molding machines from 24 ton to 800 ton. 600 sq.ft. of Class 8 Cleanroom Molding and Assembly along with in-house tooling.

www.centplasticmfg.com

Quality Certifications: ISO 13485 • ISO 9001 • AS 9100
CENTURY RUBBER CO. INC.     Booth # 108
Service Categories: Rubber Molding • Rubber To Metal Bonding • Gaskets, Seals, Washers & O-rings • Rubber Stampings • Prototypes - Rubber

The company manufactures precision custom molded & die-cut elastomer products, utilizing compression, transfer & injection molding processes. We work with most elastomers including silicone, fluorosilicone, viton, neoprene, nitrile, EPDM & natural rubber. Strong emphasis on rubber to metal bonding. Made in America.

www.centuryrubber.com

Quality Certifications: AS 9100D, ISO 9001:2015 • ITAR REGISTERED • US/Canada JCP Certified
DB ROBERTS     Booth # 129
Service Categories: Fasteners • Electronic Hardware • Assembly Hardware • Levers, Knobs & Handles • Masking

Since our inception, we have been focused on providing solutions for fastener applications in Sheet Metal Fabrication, Metalworking, and Industrial Electronics. Our "Superior Customer Service" and "Commitment to Excellence" has proven to be a winning formula fueling innovation and rapid growth year after year.

www.dbroberts.com

Quality Certifications: ISO 9001:2015 • AS 9120B
E & S PRECISION MACHINE INC.     Booth # 245
Service Categories: Machining - CNC Milling & Turning • Prototypes - Machining • Jigs & Fixtures • Machining - Precision CNC • Machining - Conventional CNC

We provide high quality prototypes. Short & long run CNC production. For more information, please contact us at: sales@esprecision.com.

www.esprecision.com

Quality Certifications: ISO 9001:2015
END 2 END MFG.     Booth # 408
Service Categories: Diecasting Design • Castings - Die, Zinc • Castings - Aluminum • Machining • Assemblies

We are strategically located in the Silicon Valley & are an industry leader in Die Casting, CNC Machining, Injection Molding, Wire EDM and Mechanical Assemblies. A Mechanical contract manufacturer with capabilities locally to support NPI development, prototypes and production. Worldwide locations to serve our customers.

www.e2emfg.com

Quality Certifications: 13485 MEDICAL • ISO 10012 • ISO 13485, ITAR, AS9100
FREETECH PLASTICS INC.     Booth # 222
Service Categories: Plastics - Pressure Forming • Plastics - Thermoforming/Vacuum Forming • Plastics - Low Volume • Electronic Enclosures • Tooling

Specializing in high-detail & close tolerance formed plastic parts. We offer CNC machining, fabrication assembly & engineering services. Our capabilities include plastic pressure & vacuum forming, drape forming, twin sheet forming, design development, materials selection & technical consulting. Primary markets we serve are medical, electronics, telecommunications, automotive & aerospace.

www.freetechplastics.com

Quality Certifications: ISO 9001 • AS 9100
HARDWARE SPECIALTY CO. INC.     Booth # 244
Service Categories: Fasteners • Electronic Hardware • Adhesives • Assemblies - Electrical • Assembly Hardware

Our SAE AS9120 Registered Quality Management System and full service Quality Assurance facilities coupled with many years of technical sales experience and deep product line inventory ensure our commitment to total customer satisfaction. Together these make Hardware Specialty an unbeatable source for all your fastener and electronic component requirements.

www.hardwarespecialty.com

Quality Certifications: SAE AS9120 • ISO 9001:2008 • ISO 14001 • MIL STD 45662A
INDICATE TECHNOLOGIES INC.     Booth # 442
Service Categories: 3D Printing • Rapid Prototyping

A value-added supplier of precision measurement and additive manufacturing equipment, Indicate Technologies Inc. has locations in Silicon Valley and the Pacific Northwest, serving the high-technology markets of the Western United States since 2004.

www.indicate1.com

INTERNATIONAL FASTENER EXPO LAS VEGAS     Booth # 403
Service Categories: Manufacturing Association • Fasteners

Since 1981 the International Fastener Expo (IFE), in Las Vegas, has been connecting the entire fastener supply chain, from manufacturer to distributor to third party sales and end users. The event consists of an all-day conference program and has over 850 exhibiting companies from around the world, 5000+ attendees, & is the largest fastener show in North America.

www.fastenershows.com/

IPE MANUFACTURING     Booth # 447
Service Categories: Machining • Machining - CNC Milling & Turning • Special Machinery - Design, Build & Rebuild • Prototypes - Machining • Extrusions - Plastic

Specializes in custom machine builds and quick turnaround short run machining. IPE Manufacturing's interdisciplinary engineering team has specialties in mechanical, electrical and chemical engineering to assist you with machine builds & part design to minimize costs & decrease time to market.

www.ipeaerospace.com

Quality Certifications: ISO 9001:2015
LUSTRE-CAL CORPORATION     Booth # 136
Service Categories: Bar Coding • Plastics - Hot Stamping & Screening • Switches - Membrane • Labels, Tapes & Decals • Die-Cutting

Manufacturer of high quality custom labels, nameplates, panel overlays, serialized & bar-coded property ID labels, membrane switches, shielding, and custom converted products. Laser cutting also available.

www.lustrecal.com

Quality Certifications: CSA & UL APPROVED • ISO 9001:2015 • MIL-P19834B • MIL-P6906B
MCNEAL ENTERPRISES INC.     Booth # 236
Service Categories: Plastics - CNC Machining • Fabricating - Plastic • Prototypes - Plastic • Plastics - Thermoforming/Vacuum Forming • Assemblies - Mechanical

Company provides prototype through production precision machining, fabricating, thermoforming & poly-welding of all plastics & assembly. All products built to customer specifications. Technical assistance is offered for engineering & materials selection. Capabilities include multilayer manifolds, CMP retaining rings & packaging.

www.mcneal.com

Quality Certifications: MIL-STD-45208 • ISO 9001
MCX INC.     Booth # 345
Service Categories: Assemblies - Cable • Wire & Cable Harnesses • Assemblies - Electromechanical • Assemblies - Electronic • Prototypes - Electromechanical

The company has over 35 years experience as a domestic contract manufacturer specializing in interconnection products including: Wiring Harnesses, Round Cable Assemblies, Flat Cable Assemblies, Flat Flex Assemblies, Jumpers, Wire Prep and Coaxial Cable Assemblies. Other assembly services include: Box Build, Electromechanical Assembly and Panel Assembly.

www.mcxinc.com

Quality Certifications: ISO 9001:2015 CERTIFIED • IPC/WHMA-A-620B • ITAR / HUBZONE CERTIFIED • CSA / UL APPROVED
MISSION PLASTICS INC.     Booth # 307
Service Categories: Plastics - Injection Molding • Assemblies • Plastics - Insert Injection Molding

We are a custom Plastic Injection Molding facility and also offer Assembly & Packaging services. A 163,000 sq.ft. facility, operating 24/7, strategically located in Ontario, California, we offer dedicated and structured project teams to manage part realization. Proven track record of delivering to expectations, Risk Management, Measurable ROI and Competitive Pricing.

www.missionplastics.com

Quality Certifications: ISO 13485
ONSHAPE     Booth # 316
Service Categories: CAD/CAM Software

A modern CAD system that eliminates design gridlock and helps engineers do their best work. Onshape unites advanced modeling tools and design data management in a secure cloud workspace that has rapidly become the primary CAD system for thousands of companies worldwide.

www.onshape.com

PACIFIC STATES FELT & MFG. CO. INC.     Booth # 134
Service Categories: Gaskets, Seals, Washers & O-rings • Die-Cutting • Rubber Fabrication • Die-Cutting - Felt, Cork & Rubber • Rubber Stampings

Manufacturer of gaskets from non-metallic materials: cork, felt, foam, fiber, plastics, rubber, & sponge. Rubber extruded and molded parts, O-rings, EMI/RFI shielding, Die-cutting, fabrication & adhesive laminating. Mfgrs. of felt, foam & sponge rubber strips & adhesive backed tapes. ISO 9001:2008 Compliant. For more information, email us at sales@pacificstatesfelt.net.

www.pacificstatesfelt.net

PENCOM     Booth # 326
Service Categories: Fasteners • Machining - CNC Milling & Turning • Screw Machining • Material Handling • Assemblies - Mechanical

Global source for custom and standard fasteners; mechanical components and thermal management solutions. Our motto: Manufacturing Globally - Supplied Locally captures our ability to provide customers with low-cost production advantages and inventory automation capabilities from our twenty-five global facilities.

www.pencomsf.com

Quality Certifications: ISO 9001 • RoHS
PRECISION CHECK VALVE     Booth # 436
Service Categories: Valves & Controls • Connectors & Couplings • Hydraulics & Pneumatics

Manufacturer of competitively priced check valves and pressure relief valves in stainless steel, brass, as well as other materials. Custom valves can be designed and created in as little as 4 weeks. We offer a wide selection of valve types, materials, and open pressures to fit your application. Call to speak to an Engineer.

www.precisioncheckvalve.com

RAY PRODUCTS INC.     Booth # 254
Service Categories: Plastics - Pressure Forming • Plastics - Thermoforming/Vacuum Forming • Plastics - Low Volume • Plastic Cabinets & Enclosures • Plastics - Reaction Injection Molding

Experts in custom heavy gauge thermoforming, including both pressure forming & vacuum forming. Forming capabilities up to 10' x 18' with 6 axis robotic trimming. Preferred supplier to the medical, electronics, telecommunications, automotive, recreational vehicle, green energy and pool & spa markets. In-house painting and contract manufacturing.

www.rayplastics.com

Quality Certifications: ISO 9001:2015 • UL LISTED
RD RUBBER TECHNOLOGY CORP.     Booth # 123
Service Categories: Rubber Molding • Silicone / Rubber - Liquid Injection Molding • Rubber To Metal Bonding • Prototypes - Rubber • Rubber - Injection Molding

Offering liquid silicone (LIM) & silicone rubber molding of precision parts to meet quality & design standards. Metal to Rubber Bonding, Silicone to Plastic Bonding, Cleanroom molding, in-house deflashing, & other value-added operations available. A full line of elastomeric materials is available for LIM, injection, transfer & compression molding.

www.rdrubber.com

Quality Certifications: ISO 9001:2015 • DOE-1050 • ITAR REGISTERED
RESPONSIBLE METAL FAB INC.     Booth # 203
Service Categories: Fabricating - Sheet Metal • Assemblies - Mechanical • Metal Cabinets & Enclosures • Prototypes - Rapid Sheet Metal

One-stop source of precision sheet metal & machining for high-tech companies. Production & Prototype. Emphasis on design assistance. Superior finish work with in-house painting & silk screening.

www.responsiblemetal.com

Quality Certifications: ISO 9001:2015 • ITAR REGISTERED
SELWAY MACHINE TOOL     Booth # 331
Service Categories: CAD/CAM Software • Manufacturing Association • 3D Printing • Automation • Robotics

We don’t believe in just selling our customers a piece of equipment or a seat of software and walking away. At Selway our award winning sales team will work with you to find the best complete solution for your unique manufacturing needs. Whether you’re making one-off complex prototypes or high-volume intricate parts that require automation, process verification, and/or on machine training, we've got you covered.

www.selwaytool.com

SIERRA CAD/CAM INC.     Booth # 443
Service Categories: Software For Job Shops & Manufacturers • Controls - Industrial & Machine Tool

We are the Northern California reseller for Mastercam. We also service the Reno and Carson City area of Nevada. Mastercam's industry-leading service and support ensures that you'll get the most from your CAD/CAM investment. We are there for you every step of the way to help you increase your bottom line with sales, training and tech support.

www.sierracadcam.com

SMALLEY     Booth # 106
Service Categories: Snap Rings & Retaining Rings • Springs - Coil • Springs - Wave • Springs - Flat • Fasteners

We are the exclusive manufacturer of the industry-leading Spirolox® Retaining Rings, an innovative design that features a no gap, 360° retaining surface without protruding ears to interfere with mating components. We are also the originator of Crest to Crest® Wave Springs which save up to 50% of space compared to conventional coil springs.

www.smalley.com

Quality Certifications: ISO 9001 & ISO 13485 • IATF 16949 • AS 9100 • ISO 14001
STREAMLINED PRECISION     Booth # 453
Service Categories: Measurement - Equipment • Calibration & Metrology • Inspection Services • Measurement & Inspection • Metrology - Equipment & Services

Measurement Machine Sales & Service from R&D to High Volume Production: Non-contact 3D Measurement Specialist, 15 years Brand-Specific Expertise, ISO-17025 Accredited Calibration Services. Experts in Quality Management Systems & Validation, Mechanical Engineering & Machinery Design Backgrounds (Micro-Vu, Mahr, LMI, Prolink, Renishaw, Snapfixture, R&R Fixtures).

www.streamlinedprecision.com

Quality Certifications: ISO 17025 (Calibration)
TECH-ETCH INC.     Booth # 103
Service Categories: Chemical Milling • Photochemical Etching & Machining • Shielding - EMI/RFI • Circuits - Flexible • Assemblies - Circuits

Photoetching services featuring specialty materials: tungsten, titanium, polyimide, elgiloy, molybdenum & nitinol. Flexible circuits manufacturer featuring fine line technology, microvias & SMT Assembly. EMI/RFI shielding products manufacturer specializing in beryllium copper spring fingers, conductive fabric gaskets & knitted wire mesh.

www.tech-etch.com

Quality Certifications: ISO 9001:2008 • AS 9100 REV C
THE OLANDER COMPANY     Booth # 303
Service Categories: Fasteners • Assembly Hardware • Electronic Hardware • Wheels & Casters • Springs - Wave

A full line distributor of standard and metric fasteners, including commercial and specialty fasteners, precision hardware, electromechanical components, tools, adhesives, and wire management products. The Olander Co. has been proudly serving the Silicon Valley since 1962 and currently serves 63 different countries.

www.olander.com

TOOLANDER ENGINEERING INC.     Booth # 425
Service Categories: Stampings - Progressive Die • Stampings - High Volume • Tooling • EDM • Machining

Founded in 1975 by Harri & Helga Kutzmarski, German immigrants who arrived in America in 1961. Harri was trained as a machine builder in Germany & used his skills to quickly ascend as a master Tool & Die Maker, and along with his NTMA trained sons began his own business. Now three generations of unsurpassed talent & quality designing, building & operating complex tight tolerance precision stamping dies.

www.toolander.com

Quality Certifications: ISO 9001:2008 CERTIFIED
TUTCO     Booth # 202
Service Categories: Heating Elements - Custom • Heating Elements - Electric • Heaters - Custom • Assemblies - Electrical • Fans & Blowers

The world's largest supplier of open coil heating elements. We produce 35,000 to 38,000 heaters a day to meet the demands of our OEM customers. Leading the world in heating innovation, Tutco holds 80% of the U.S. Patents in open coil heating technology. Tutco heating components can be found in countless commercial applications, including refrigeration, HVAC, appliance, lab equipment and vending. We can quickly bring your project from concept to completion.

www.farnam-custom.com

Quality Certifications: ISO 9001:2008 • ISO 14001:2004 • OHSAS 18001:2007
UNITED WESTERN ENTERPRISES INC.     Booth # 109
Service Categories: Photochemical Etching & Machining • Shielding - EMI/RFI • Springs - Flat • Chemical Milling

Photochemical etching of thin metal parts to custom specifications from aluminum, copper, beryllium copper, nickel, nickel alloys & stainless steel alloys. Secondary operations: in-house forming, laser welding & mechanical soldering. Applications are apertures, encoder disks, fine screens, flat springs, lead frames, shielding and shims.

www.uweinc.com

Quality Certifications: AS 9100D ISO 9001:2015
1FACTORY INC.     Booth # 435
Service Categories: Software For Job Shops & Manufacturers • Quality Assurance • Measurement & Inspection • Measurement - Software • Machining

Provides powerful yet easy-to-use software for manufacturing and supply chain quality control. 1factory makes it easy to collect and analyze feature-level or parameter-level data (dimensional measurements, test results etc) for thousands of parts and product-features, from within your factory and across your supply chain.

3D SYSTEMS ON DEMAND     Booth # 401
Service Categories: Rapid Prototyping • Plastics - Injection Molding • Prototypes - Plastic • Prototypes - Rapid Casting • Prototypes - Rapid Sheet Metal

We deliver the technologies, processes, tools and expertise to quickly translate your designs into manufactured parts. We offer rapid prototyping, functional prototyping, fully realistic appearance models, and low-volume manufacturing using a full range of proven capabilities.



Quality Certifications: ISO 9001:2008
A.L. JOHNSON CO.     Booth # 110
Service Categories: Castings - Aluminum • Prototypes - Rapid Casting • Castings - Zinc

Rubber Plaster Mold (RPM) process. Thin wall, fine surface, no draft, close tolerance, quick delivery, inexpensive, permanent tooling. Production quantities from prototype tooling. Complete machining and finishing. Castings - plaster mold & rubber mold.



Quality Certifications: AS 9100 • ISO 9001
ABX ENGINEERING INC.     Booth # 454
Service Categories: Assemblies - Printed Circuit Boards • Assemblies - Electromechanical • Testing - Printed Circuit Boards • Assemblies - Turnkey • Assemblies - Electronic

Full Service Electronic Contract Manufacturer providing PCBA to ElectroMechanical Assembly, NPI (New Product Introduction/Prototype), Low to High Mix/Volume, PCBA, AOI, X-Ray, Full Test, Fulfillment (Ship to end Customers) and Depot Repair.

Quality Certifications: ISO 9001:2016 • ISO 13485:2016 • IPC 610 • ITAR, AS 9100D
ACCEL THERMAL     Booth # 426
Service Categories: Heat Sinks • Extrusions - Aluminum • Machining - Aluminum

Focused on local Southern California extrusion based heat sink production. Accel Thermal provides Single Sided, Double Sided, Mounting Channel, Milling, Drilling, and metal finishing of heat sinks. Local extrusion and local plating. Fabrication in Brea, California.

Quality Certifications: Internal Quality Management • Inspection Report • COC Raw Material • COC Certificate
ACF COMPONENTS & FASTENERS INC.     Booth # 340
Service Categories: Fasteners • Electronic Hardware • Industrial Supplies • Shielding - EMI/RFI • Gaskets, Seals, Washers & O-rings

A worldwide Master Stocking Distributor for AVK, BIVAR, HEYCO, FEDERAL-MOGUL, GENERAL CABLE, KEYSTONE, PANDUIT, PIC DESIGN, RAF, RICHCO, SHAKEPROOF, SUMITOMO, 3M, ZIERICK, and many other name-brand fastener and electromechanical component manufacturers, and is among the leaders in engineered specialty fasteners.

Quality Certifications: ISO 9001:2015
ADDITIVE MANUFACTURING LLC     Booth # 346
Service Categories: 3D Printing • Machining - CNC Milling & Turning • Tooling - Rapid Injection Molding • Prototypes - Rapid Sheet Metal • Rubber - Compression Molding

Established in 2009, we offer metal & plastic 3D Printing, and traditional manufacturing. ITAR & ISO 9001 services include: SLA, CNC, SLS, FDM, DMLS, Polyjet, Urethane & Metal Castings, Laser Cutting, Production Tooling & Molding. We have over 20 years of additive and traditional manufacturing experience, and provide outstanding customer service.



Quality Certifications: ITAR • ISO 9001
AGE NAMEPLATE     Booth # 434
Service Categories: Switches - Membrane • Nameplates, Dials & Panels • Gaskets, Seals, Washers & O-rings • Labels, Tapes & Decals • Rubber - Injection Molding

We manufacture custom membrane switches, graphic overlays, 3D dome labels, die-cut gaskets, labels, elastomer keypads and more! For over 40 years we've served our markets with unparalleled customer service, technical support and stability.

Quality Certifications: ISO 9001:2015
A-LASER     Booth # 208
Service Categories: Laser Cutting • Laser Machining - Micro • Laser Drilling • Laser Marking • Photochemical Etching & Machining

A premier precision parts manufacturer, providing consistent, high quality laser services for a wide range of industries. Specializing in the processing of ultra-thin materials, our technicians provide solutions for your most challenging applications.

Quality Certifications: ISO 9001:2008
ALLMOTION INC.     Booth # 338
Service Categories: Motion Control • Motors & Drives • Heat Sinks

Manufactures Stepper Drives, Stepper Controllers, Servo Drives and Servo Controllers. The most compact Intelligent Stepper Motor Drives and Stepper Motor Controllers on the market today. Our Servo Motor Controllers and Brushless DC Motor Controllers feature quadrature encoder feedback and are also programmable to allow stand-alone operation.



AM COMPASS GROUP INC.     Booth # 301
Service Categories: Machining • Molds & Moldmaking - Plastic • Metal Injection Molding • EDM • Stampings - Metal

Offering one-stop shopping options to assist your mechanical needs from prototype to volume production with a combination of CNC machining, injection molding, metal injection molding (MIM), extrusion and stamping. Our experienced engineers and skilled mechanics produce high quality parts promptly at aggressive prices. We will be happy to support you!

Quality Certifications: ISO 9001:2000 • ISO 14001
AMALCO (AMERICAN ALUMINUM CO.)     Booth # 112
Service Categories: Stampings - Deep Drawn Shells • Hydroforming • Assemblies - Mechanical • Brazing - Aluminum Dip

Deep drawn & Hydroformed Enclosures; plus Aluminum Dip Brazing. SECONDARY OPERATIONS: CNC Machining, Anodizing, Iriditing, Painting (Powder Coat & Wet), Piercing/Forming, Welding, Light Assembly and Heat Treating. MATERIALS: Aluminum, Stainless, Brass, Copper, Hastelloy, Nickel, Steel & Specialty Metals. MARKETS SERVED - All.



Quality Certifications: MIL-I-45208A • ITAR REGISTERED
ANDERSON QUALITY SPRING MFG. INC.     Booth # 117
Service Categories: Springs - Coil • Springs - Flat • Springs - Wave • Assemblies • Stampings - Fourslide

Custom manufacturer of springs, wire forms and formed metal products. Our customers are in the automotive, firearm, knife, sporting goods, electronic, medical, dental and motorcycle suspension products industries, worldwide. We work with our customers from design and prototyping to supplier managed inventory programs.



Quality Certifications: ISO 9001:2015 • IATF 16949:2016
APPLIED ENGINEERING INC.     Booth # 325
Service Categories: Assemblies - Electromechanical • Automation • Special Machinery - Design, Build & Rebuild • Industrial Equipment • Prototypes - Fabrication

A vertically integrated DQS/UL ISO9001, 13485 and AS9100 certified contract manufacturing company that specializes in complex, high precision mechanical and electrical assemblies. The company has been in business here in Silicon Valley for over 40 years serving the semiconductor, solar, bio-med, and aerospace industries.

Quality Certifications: ISO 13485:2016 • ISO 9001:2015 • AS 9100:2016
AQS INC.     Booth # 107
Service Categories: Assemblies - Turnkey • Assemblies - Printed Circuit Boards • Assemblies - Electrical • Assemblies - Electromechanical • Optical Components

EMS Provider with capability to support from early design to market in shortest time frame at very low cost solution. Full support of PCBA & box build from NPI to mass production. ITAR Compliant.



Quality Certifications: IPC610B • ISO 9001 • TUV / UL LISTED • ISO 13485
AREIAS SYSTEMS INC.     Booth # 317
Service Categories: Assemblies - Electromechanical • Controls - Industrial & Machine Tool • Engineering & Technical Services • Instrumentation & Controls • Motors & Drives

Established in 1999, Areias Systems provides contract manufacturing, design and prototyping services to a wide variety of industries. We are an ISO 9001-certified company and have the capability to build to customer specifications. Our main concentration is to design and build Power and Control Systems per UL508a and NFPA79 regulations.

Quality Certifications: ISO 9001:2008 • UL 508A • CE • EN
ARGO SPRING MFG. CO. INC.     Booth # 138
Service Categories: Springs - Coil • Springs - Flat • Wire Forming & Fabricating • Stampings - Fourslide • Stampings - Metal

Manufactures CNC Coil springs, Flat springs, CNC wire forms, Metal Stampings, Fourslide products, assemblies (welding, staking, riveting etc.), washers (Belleville and curved) to blue print or specifications. AS9100 Certified.



Quality Certifications: ISO 9001:2015 • AS 9100D • DD 2345 • Sabre Approved
BAR-S MACHINE INC.     Booth # 318
Service Categories: CAD Design Services • Machining - Precision CNC • Machining - CNC Milling & Turning • Machining - Swiss Laser & CNC Swiss • Machining - Production

Over the past 40 years we have grown from a single employee in a 300 square foot shop to over 30 employees and 19,000 square feet of manufacturing space that houses the latest state of the art CNC mills, CNC lathes and CNC Swiss machines as well as a complete Inspection Department along with our Design and Engineering Department. ISO 9001:2015/ AS9100D

Quality Certifications: AS 9100, ISO 9001:2015 • FEDERAL FIREARMS LICENSE - FFL
BISCO INDUSTRIES     Booth # 214
Service Categories: Fasteners • Electronic Components • Electronic Hardware • Assembly Hardware • Bearings

We are a premier distributor of Electronic Components and Fasteners used for production in Aerospace, Communication, Computer, Fabrication, Industrial Equipment, Instrumentation, Marine and Military Industries. We strive to be our customers' sole supplier of electronic components and fasteners by being a local presence and providing exceptional service.

Quality Certifications: AS 9100 • ISO 9001:2008 • BOEING APPROVED • LOCKHEED MARTIN
BOKER'S INC.     Booth # 320
Service Categories: Washers • Stampings - Shims • Stampings - Metal • Stampings - Short Run • Stampings - Progressive Die

An owner-operated custom manufacturer of stampings and non-standard washers, spacers and shims since 1919. With over 2,000 available materials our customers have endless possibilities with fast delivery. BBB Accredited Business.



Quality Certifications: AS 9100 • ISO 9001 • WBENC
BOSSARD INC.     Booth # 415
Service Categories: Fasteners • Slides • Electronic Hardware • Shielding - EMI/RFI • Assembly Hardware

We are a certified distributor of fasteners and electronic components serving avionics, gaming, medical, energy, aerospace and defense markets.

Quality Certifications: ISO 9001:2008 • AS9120
CALIFORNIA CASTER AND HAND TRUCK CO.     Booth # 341
Service Categories: Wheels & Casters • Material Handling • Polyurethane - Rollers • Bearings • Levers, Knobs & Handles

For over 60 years California Caster has helped customers find the right caster, wheel, leveler and material handling equipment to meet specific needs. We offer economical mobility solutions.

Quality Certifications: SAE • UL APPROVED • NSF / RoHS • ISO 9001-2000
CALPIA - JOINT VENTURE PROGRAM     Booth # 239
Service Categories: Assemblies • Sewing • Packaging • Assemblies - Turnkey • Wire & Cable Harnesses

The Joint Venture Program (JVP) provides vocational training opportunities to offenders within California’s correctional settings and offers businesses attractive benefits for employing them. Your profit. Their opportunities. Our commitment.

CAPLUGS      Booth # 217
Service Categories: Plastics - Injection Molding • Plastics - Extruded Profiles • Die-Cutting • Tooling

A worldwide leader in product protection for over 70 years. We specialize in six different molding processes allowing us to offer a variety of design and material options. Our catalog highlights 15,000+ parts in stock and ready to ship. If a part doesn't meet your requirements, our team of engineers will work with you to design exactly what is needed.

Quality Certifications: ISO 9001 • IATF 16949 • ISO 13485 • ISO 14001
CELLOTAPE-A RESOURCE LABEL GROUP CO.     Booth # 337
Service Categories: Labels, Tapes & Decals • Die-Cutting • Nameplates, Dials & Panels • Switches - Membrane • Rubber - Compression Molding

Manufactures pressure sensitive labels, RFID tags and custom die cut components - overlays, nameplates, insulators, gauges, EMI/RFI shielding, gaskets, shims spacers, shock absorbers, LRF components, tamper-evident security seals & others. Cellotape's print processes include screen, thermal transfer, hot stamp, digital, flexography, RFID & Near Field Communications converter.

Quality Certifications: UL CERTIFIED • ISO 9001:2015 • RoHS
CENCAL CNC     Booth # 344
Service Categories: Machining - CNC Milling & Turning • Laser Cutting • Waterjet Cutting - Metal • Fabricating - Sheet Metal • Machining - Production

A precision CNC machine and fabrication shop specializing in transportation, medical, electronics, agriculture and recreational products. Cencal CNC has the capacity and capability to run your prototyping or high volume parts production needs.

CENTURY SPRING CORP.     Booth # 223
Service Categories: Springs - Coil • Stampings - Fourslide • Wire Forming & Fabricating • Springs - Flat • Springs - Wave

A MW Industries location, is the go-to source for Made in USA stock and custom springs, for any OEM or MRO application. Same day shipments from over 35,000 stock designs - compression, extension, torsion, tapered, disc, urethane and die springs. Century also specializes in custom springs. Inquire at info@centuryspring.com. FREE CATALOG upon request.



Quality Certifications: ISO 9001:2008
CHICAGO PRECISION MFG.     Booth # 354
Service Categories: Prototypes - Rapid Sheet Metal • Fabricating - Sheet Metal • Welding & Weldments • Powder Coating

A full service metal fabricator with internal powder & liquid coating, and silk screening services. We can support domestic prototype and short run production.

COFAN USA     Booth # 431
Service Categories: Heat Sinks • Fans & Blowers • Prototypes - Machining • Machining - Conventional CNC • Machining - Precision CNC

25 years of experience, local, high precision CNC machining in Silicon Valley. Provides DC Axial Fans, DC Blower Fans, CPU Coolers, Active BGA Heat Sinks, Passive BGA Heat Sinks and Custom Heat Sink products for the most difficult thermal challenges. Provides OEM customized manufacturing for metal fabrication, extrusion, die-casting and injection.

Quality Certifications: ISO 9001:2008 • ISO 14001:2004 • OHSAS 18001 • CE, RoHS
CONNECTICUT COINING INC.     Booth # 216
Service Categories: Stampings - Deep Drawn Shells • Stampings - Short Run • Stampings - Metal • Stampings - Ferrous & Non Ferrous • EDM

Deep drawing specialist in a wide range of metals based on customers' supplied drawings. All required tooling is built and tested on site. We supply small to medium production runs to the high voltage power & X-ray tube manufacturers; as well as components for aerospace and other industries.



Quality Certifications: AS 9100D • ISO 9001:2015 • ITAR REGISTERED
CTEMS     Booth # 418
Service Categories: Cable & Wire Manufacturing • Assemblies - Electromechanical • Electronic Enclosures • Wire & Cable Harnesses • Prototypes - Electromechanical

A leading provider of engineering and contract manufacturing services, specializing in custom cable design and assembly; cable harness design and assembly; and electro-mechanical box builds. Customers include high growth companies in the semiconductor, electric vehicle manufacturing, and solar manufacturing markets.

Quality Certifications: WBENC / WBE • UL 508A • SBA HUBZONE CERTIFIED
CYGNET STAMPING & FABRICATING INC.     Booth # 247
Service Categories: Stampings - Short Run • Fabricating - Sheet Metal • Laser Cutting • Prototypes - Rapid Sheet Metal • Prototypes - Stamping

Custom metal stamping & sheet metal fabrication using LOW COST tooling of our own unique design. Economical for production runs of 50 to 50,000. We also offer rapid prototype, laser cutting & machining. Email us for a quote at sales@cygnetstamping.com

Quality Certifications: ISO 9001
DA/PRO RUBBER INC.     Booth # 114
Service Categories: Rubber Molding • Plastics - Injection Molding • Silicone / Rubber - Liquid Injection Molding • Rubber To Metal Bonding • Rubber - Compression Molding

5 facilities for compression/injection molding - high-quality custom rubber, TPE, & plastic components molded to precision tolerances such as diaphragms, seals, connectors, molded shapes, rubber to metal parts for medical device, electronic & aerospace industries. Class 10,000 cleanroom - chemists & engineers assist in optimal moldability. sales@daprorubber.com



Quality Certifications: ISO 9001
DESIGN OCTAVES INC.     Booth # 111
Service Categories: Plastics - Reaction Injection Molding • Plastics - Low Volume • Electronic Enclosures • Plastics - Painting • Polyurethane - Parts

Our clients are Medical, Instrumentation, Analytical, Government & Security Companies. We specialize in UL94V-O enclosures in quantities of 100-5000 units per year. All tooling is built In-house to the most stringent standards & guaranteed for a minimum of 10,000 cycles. Also, we provide Painting, UL Approved Shielding & Decoration.

Quality Certifications: UL-QMRX2 • UL-QMMY2 • ISO 9001:2008
DESIGNPORT     Booth # 213
Service Categories: Electronics - New Product Development • CAD Design Services • 3D Printing • Finite Element Analysis - FEA • Engineering & Technical Services

A full-service engineering, product development and CAD services firm focused on the development of innovative solutions. Our team of skilled engineers have extensive experience to provide affordable, fast-paced design and analysis services to those looking for unique solutions and exciting products.

Quality Certifications: DOD REGISTERED
DIAMOND TOOL & DIE INC.     Booth # 237
Service Categories: Machining - CNC Milling & Turning • Machining - Precision CNC • Plastics - CNC Machining • Prototypes - Machining • EDM - Wire

Full Service Jobshop, 45+ years experience. CNC (& Manual) Milling & Turning; Lathes up to 40" swing, Horizontals up to 70". In-house Wire EDM, Fixturing, Tooling, Welding, Honing, Grinding, Repairs, Reverse Engineering, Deburring, Assembly, Inspection. We machine all metals and plastics. Prototype to Production runs. Quality with competitive pricing. Employee owned.

DOUGCO METAL FINISHING     Booth # 330
Service Categories: Deburring - Tumble & Vibratory • Surface Finishing • Metal Finishing - Passivating • Metal Finishing - Tumble & Vibratory Polishing • Castings - Impregnation

Mass finishing job shop for vibratory or tumble deburring & burnishing, casting impregnation, glass media blasting, shot peening, robotic polishing & aluminum chromate conversion coating.

DPSS LASERS INC.     Booth # 238
Service Categories: Laser Marking • Laser Engraving • Laser Cutting • Lasers

Low-cost “Quasi-CW” UV lasers, 0.1-5.0+Watts, 355nm with high peak powers. Applications using our UV “Cold-Laser” are Micromachining, Marking, Sapphire Scribing, ITO Removal, Semiconductor and Medical Packaging.

DT ENGINEERING ASSOCIATES INC.     Booth # 423
Service Categories: Engineering & Technical Services • Rapid Prototyping • Industrial Design Services • Prototypes - Electromechanical

An engineering consulting firm that focuses on product and equipment development. We have over thirty years of product development experience in the areas of mechanical engineering, electrical engineering, and industrial design. We take pride in our ability to solve difficult engineering and design problems, saving you both time and money.

EAGLE GROUP MANUFACTURERS     Booth # 427
Service Categories: Castings - Sand & Shell • Castings - Investment • Castings - Permanent Mold • Machining - Castings • Castings - Aluminum

Diverse capabilities offer solutions for multiple casting needs: Shell molded steel & stainless steel sand castings. Precision investment castings in steel, stainless steel, bronze & aluminum. Permanent mold; Large, thin-walled greensand aluminum castings. Full service machining & assembly. Magma 3D Simulation & 3D printed molds keep us cutting edge.

Quality Certifications: ISO 9001:2008 • PED
EDM TECHNOLOGIES INC.     Booth # 113
Service Categories: EDM • EDM - Wire • EDM - Sinker • EDM - Small Hole Drilling

Electrical discharge machining (EDM) shop specializing in Wire EDM, Sinker EDM, Small Hole EDM & precision machining. EDM Technologies is a certified precision tooling source.



Quality Certifications: ISO 9001:2015
EMKA INC.     Booth # 229
Service Categories: Assembly Hardware • Electronic Hardware • Hinges • Extrusions - Rubber • Gaskets, Seals, Washers & O-rings

A leading manufacturer of enclosure hardware. Products include handles, hinges, locks, latches, gasketing and accessories.

Quality Certifications: ISO 9001 • ISO 14001 • RoHS • UL APPROVED
EPILOG LASER     Booth # 201
Service Categories: Lasers • Laser Cutting • Laser Engraving • Laser Marking • Bar Coding

An industry leader in design of laser engraving, cutting & marking systems, manufacturers of the Epilog Zing, Mini, Helix, Fusion Pro, FiberMark, and G2 Galvo series of laser systems.



Quality Certifications: ANSI STANDARDS • IEC • CE • CFR 21
FERREUS INDUSTRIES     Booth # 405
Service Categories: Laser Cutting • Prototypes - Fabrication • Rapid Prototyping • Fabricating - Sheet Metal • Reverse Engineering

A leader in AS9100D and ISO9001:2015 registered quick-turn prototyping and production sheet metal fabrication services. Ferreus Industries provides 95% of our services in-house including: laser cutting, turret punching, bending & forming, welding, hardware insertion, powder coating, paint and more. We can turn a project in as little as two days, saving valuable time.

Quality Certifications: AS 9100D • ISO 9001:2015
FLUENT CAD     Booth # 404
Service Categories: CAD Design Services • Molds & Moldmaking - Plastic • Plastics - Injection Molding • Consulting - Manufacturing • Tooling - Plastic Injection Molding

Offers 3D CAD modeling as well as 2D print documents of your ideas, projects and design sketches. Fluent CAD specializes in plastic injection part designs, assemblies and the molds that make them. Engineering consultation and reports also available including Moldflow analysis.

G ZERO CNC MACHINE     Booth # 433
Service Categories: Machining • Machining - Precision CNC • Machining - Production • Machining - CNC Milling & Turning • Machining - Stainless Steel

Machining parts in Boise, Idaho for 10 years. Our customers include aerospace, medical, firearms and semiconductor. G Zero machining centers include multi-pallet systems, horizontal milling, vertical milling and lathe turning. Our commitment to quality provides the foundation for producing parts that consistently meet all of our customer’s requirements. Our skilled team and state-of-the-art machines are ready for your complex and large production machining jobs. Prototyping and short run jobs also available.

Quality Certifications: AS 9100 REV D • ISO 9001:2015 CERTIFIED
GEMINI MFG. CO.     Booth # 428
Service Categories: Machining - Precision CNC • Machining - Aluminum • Machining - Multi Axis • Extrusions - Aluminum • Machining - Microwave

A precision machine shop built on three generations of machining experience. This experience has been formed by participating in the growth of the Silicon Valley and serving many of it's companies. At Gemini Mfg. Co. we support prototype and production machining. Whether you have basic machining or 5 axis requirements, Gemini is your precision machining partner.

GENERAL FOUNDRY SERVICE     Booth # 227
Service Categories: Castings - Aluminum • Castings - Plaster Mold • Castings - Sand & Shell • Castings - Permanent Mold • Castings - Investment

We are the only foundry offering 5 complementary casting processes, in-house patternmaking, machining, surface finishing, and inspection - a true best in class turnkey solution. Thin/thick walled, smooth surface, class A finishes, oz. to 500 lbs., design for manufacturing, breaking design rules with complex parts.



Quality Certifications: ISO 9001:2015 • ITAR REGISTERED
GOPROTO INC.     Booth # 119
Service Categories: 3D Printing • Machining • Tooling - Plastic Injection Molding • Tooling - Casting • Prototypes - Models

Delivering turnkey plastic and metal part manufacturing solutions including industrial design model making, rapid prototyping, additive manufacturing, cast urethane, CNC machining, rapid sheet metal, rapid injection tooling, production parts (injection molding, stamping, die-cast, sheet metal), and part finishing to complete your product.



Quality Certifications: ISO 9001
GPC ELECTRONICS     Booth # 124
Service Categories: Assemblies - Electronic • Assemblies - Turnkey • Wire & Cable Harnesses • Surface Mount Technology - Assembly • Assemblies - Printed Circuit Boards

Since our inception in 1985, we've had a track record of working with leading OEMs in North America, Europe, Asia & the Pacific. We are able to customize processes, delivering unique solutions to our customers, providing them with a competitive advantage & positive outcomes. We are a full service EMS and cable harness provider with four manufacturing sites globally.



Quality Certifications: ISO 9001:2015, AS 9100 • ISO 14001:2015 • ISO 13485:2016 • IATF 16949:2016
GREENE RUBBER CO. INC.     Booth # 250
Service Categories: Rubber Fabrication • Rubber Molding • Rubber - Transfer Molding • Silicone / Rubber - Liquid Injection Molding

Custom rubber gaskets & seals. Custom rubber molding, LSR, vibration isolation, rubber-to-metal bonding, Chomerics EMI & Thermal materials, Rogers Poron Urethane Foams, 3M Adhesives, Parker O-Rings, St. Gobain tubing and Panasonic PGS.

Quality Certifications: ISO 9001:2015 • AS9100D
GROVTEC MACHINING     Booth # 444
Service Categories: Screw Machining - Swiss/CNC Swiss • Screw Machining - Multi Spindle • Machining - CNC Milling & Turning • Machining - Miniature Precision • Plastics - CNC Machining

Specializes in small parts manufacturing for a number of industries. Grovtec Machining is ITAR registered and AS9100 certified. Capabilities include multi spindle and single spindle screw machining, vertical and horizontal CNC milling and CNC Swiss turning. Secondary services include Engineering and design, prototype and mechanical assembly.

Quality Certifications: AS 9100:2009 REV D • ISO 9001-2015 • ITAR
HALLMARK NAMEPLATE INC.     Booth # 327
Service Categories: Nameplates, Dials & Panels • Screen Printing • Switches - Membrane • Assemblies - Electronic • Labels, Tapes & Decals

US manufacturer of nameplates, overlays, membrane switches and a provider of electronic manufacturing services. Hallmark is a small veteran owned company, ISO9001:2015, ISO 13485:2016 and ITAR Registered. Hallmark is also UL and CSA Recognized on many substrates and adhesives.

Quality Certifications: ISO 9001:2015 • ISO 13485:2016 • ITAR • UL, CSA
HARDCRAFT INDUSTRIES INC.     Booth # 414
Service Categories: Fabricating - Sheet Metal • Fabricating - Stainless Steel • Laser Cutting • Fabricating - Aluminum

We are the precision sheetmetal, weldment, and large frame supplier of choice to demanding customers across end markets including aerospace, medical, electronics, semiconductor, and defense end markets. Hardcraft Precision's customer service is second to none, and we pride ourselves on meeting critical tolerances that others can't or won't match.

Quality Certifications: ISO 9001:2015 • ITAR REGISTERED
HARMONY CASTINGS LLC     Booth # 132
Service Categories: Castings - Aluminum • Castings - Sand & Shell • Castings - Sand

We are a leader in the production of aluminum castings. We are an ITAR compliant and AS9100 Certified facility. Our V-process delivers tight tolerances, thin walls and excellent surface finish. Further we're able to bring your project from model to production in just three weeks.



Quality Certifications: ISO 9001:2008 • AS 9100 REV D
HAWK RIDGE SYSTEMS     Booth # 302
Service Categories: CAD/CAM Software • 3D Printing • Assemblies • Machining • Plastics - Injection Molding

A global provider of engineering design and manufacturing software including SOLIDWORKS 3D CAD, Hawk Ridge Systems has solutions for 3D design, simulation, plastics, assemblies and wiring. CAMWorks offers CNC machining and our 3D Printer line from HP, Markforged, and Artec provides the most competitive solutions for 3D printing. Ask us more at hawk@hawkridgesys.com.

HEROLD PRECISION METALS LLC     Booth # 448
Service Categories: Fabricating - Sheet Metal • Assemblies - Electromechanical • Assemblies - Mechanical • Metal Cabinets & Enclosures • Prototypes - Rapid Sheet Metal

Precision Sheet Metal Fabricator with core competencies that include, but are not limited to Design Engineering input up to any level a customer desires, fabrication, finish, and electrical / mechanical assembly up to any level a customer would desire. We offer quick turn prototype, pre-production, and production support up to and including Kanban / JIT programs.

Quality Certifications: ISO 9001:2008 • ITAR • RoHS • UL CERTIFIED
HILLTOP TECHNOLOGY LABORATORY INC.     Booth # 439
Service Categories: Prototypes - Machining • Machining - Aluminum • Machining - Precision CNC • Machining - CNC Milling & Turning • Machining - Robotic

Specializes in prototypes, custom CNC machining, short run productions, and quick turnaround products. Rapid prototyping of precision machining is our specialty.

HP     Booth # 321
Service Categories: 3D Printing

We create technology that makes life better for everyone, everywhere. Through HP's product and service portfolio of personal systems, printers, and 3D printing solutions, we engineer experiences that amaze. More information about HP Inc. is available at http://www.hp.com/go/3Dprinting.

HYATT DIE CAST & ENGINEERING CORP.     Booth # 234
Service Categories: Castings - Die, Aluminum • Castings - Die, Zinc • Machining - CNC Milling & Turning • Powder Coating • Assemblies - Mechanical

Produces high-pressure aluminum and zinc castings up to 80 lbs. We also offer complete die cast tool design and fabrication, secondary CNC machining, powder coating, hardware assembly and kitting. We are ISO 9001:2008 and AS9100 Rev D certified. We have extensive experience in the aerospace, medical, electronics and gaming industries.

Quality Certifications: ISO 9001:2015 • AS 9100 REV D • BOEING APPROVED • HONEYWELL APPROVED
IGRAPHICS PRECISION PRINTING     Booth # 122
Service Categories: Nameplates, Dials & Panels • Labels, Tapes & Decals • Insulators • Screen Printing • Adhesives

A provider of Lexan Overlays, Nameplates, Warning Labels, Decals, Control Panels, Front Panels, Metalphoto Aluminum Plates, Engraved Aluminum Plates, Die Cut Insulators, Electroluminescent Lamps & other screen and digitally printed products.



Quality Certifications: ISO 9001:2015 • UL APPROVED • RoHS
IMT PRECISION INC.     Booth # 306
Service Categories: Machining • Machining - Large Parts • Machining - CNC Milling & Turning • Machining - Weldments • Prototypes - Rapid Sheet Metal

We are the Bay Area's premier source for machining and sheet metal fabrication. Specializing in large machining (up to 200" x 135" x 42"), IMT Precision offers unparalleled service and capabilities. IMT is ISO 9001:2008 certified and has a 50,000 sq. ft. manufacturing facility in Hayward, CA.

Quality Certifications: ISO 9001:2015
INLAND METAL TECHNOLOGIES INC.     Booth # 329
Service Categories: Fabricating - Sheet Metal • Machining - CNC Milling & Turning • Prototypes - Fabrication • Assemblies - Mechanical • Engineering & Technical Services

A leading provider of precision sheet metal fabrications, enclosures, weldments & assemblies. Inland specializes in small to mid-volume production with extensive experience in DFM, NPI and Lean Manufacturing. Our engineers design innovative solutions for your manufacturing & fabrication challenges. For additional information please contact: sales@inlandmetal.com.

Quality Certifications: AS 9100 • ISO 9001:2015 • AWS D1.1 • RAYTHEON & ABBOTT CERTIFIED
INSACO INC.     Booth # 104
Service Categories: Grinding - Ceramics • Machining - Ceramics • Grinding - Glass • Ceramic Parts • Optical Polishing

Precision fabricator of ultra hard materials, utilizing advanced ceramic materials including sapphire, ceramics from all producers, glass, quartz, & many others. Machining to very precise dimension & tolerances in a variety of shapes & configurations as required. No standard parts/all mfg. to specific customer requirements. Prototype to production. No metals or plastics.



INTERNATIONAL CERAMIC ENGINEERING     Booth # 142
Service Categories: Ceramic Parts • Machining - Ceramics • Grinding - Ceramics • Ceramics - Metallizing & Plating • Prototypes - Machining

A leading manufacturer & fabricator of technical ceramic materials & machinable thermo-plastics. We offer engineering assistance during the prototype process through to production. We specialize in unique geometries made from high quality advanced materials. Competitive pricing with quick deliveries. Materials include Alumina Oxide, Boron Nitride, Macor™, Zirconia, PEEK, Ultem & More!



JARVIS MANUFACTURING INC.     Booth # 413
Service Categories: Machining - CNC Milling & Turning • Assemblies - Mechanical

We have been fulfilling the precision machining requirements of the Bay Area since 1959. Our advanced CNC Machine tools provide us with the capability to machine complex parts to unrivaled quality.

Quality Certifications: ISO 9000:2015
JOHNSON CENTRIFUGAL TECHNOLOGY     Booth # 233
Service Categories: Forgings - Aluminum • Castings - Brass • Castings - Stainless Steel • Machining • Forgings - Seamless Rolled Rings

Formed aluminum, copper, stainless components to wrought properties. Excellent anodizing response with high vacuum integrity. Custom alloys & complete finished machining to your specifications.



Quality Certifications: MIL-SPEC 45208 • ISO 9001:2008
JWP MANUFACTURING     Booth # 205
Service Categories: Machining - Multi Axis • Machining - Precision CNC • Machining - CNC Milling & Turning • Prototypes - Machining • EDM - Wire

5 Axis Multi-Axis Machining with 3rd Party Robot Automation, Horizontal & Vertical 5 axis cells, Mill/Turning, Turn/Milling, Wire EDM, and Heat Treat and Lapping. From Small Components to Crane held work pieces for the Medical, Commercial Aircraft, Defense, and Laser/Optics industries. JWP has 2 plants, Rancho Cordova, CA and Santa Clara CA.

Quality Certifications: AS 9100 • ITAR REGISTERED • ISO 9001:2015 • ISO 13485:2019
KLINGER IGI     Booth # 440
Service Categories: Gaskets, Seals, Washers & O-rings • Waterjet Cutting - Non-Metal • Shielding - EMI/RFI • Die-Cutting • Prototypes - Fabrication

We are a build-to-print, contract manufacturer of precision cut parts for OEMs and Tier 1s in aerospace, electronics, medical device, industrial automation, and MRO industries. We are AS 9100 / ISO 9001 certified. Custom parts include thermal & gap pads, spacers, shims, shields, washers, seals and gaskets formed by die, flash, router, laser, and waterjet processes.

Quality Certifications: AS 9100 • ISO 9001:2015 • ITAR • CAGE CODE
KNIGHTSBRIDGE PLASTICS INC.     Booth # 339
Service Categories: Plastics - Injection Molding • Molds & Moldmaking - Plastic • Plastics - Thermoset Molding • Plastics - Insert Injection Molding • Welding - Laser

A precision injection molder with an In-House toolroom. We specialize in small intricate parts using many high temperature & chemically resistant materials.

Quality Certifications: ISO 9001:2008 • ISO 13485:2003
KORMACHINE     Booth # 322
Service Categories: Machining - CNC Milling & Turning • Machining - Precision CNC • Machining - Stainless Steel • Machining - Multi Axis • Machining - Castings

Prototypes and production manufactures complex machine milled and turned parts and assemblies for our clients principally in the Aerospace, Aircraft, Oil and Gas, Food and Beverage, Railroad, Construction, Defense, and Consumer Products Industries.



Quality Certifications: AS 9100D, ISO 9001:2015 • JCP • CAGE CODE • ITAR
KOVATCH CASTINGS INC.     Booth # 116
Service Categories: Castings - Investment • Castings - Stainless Steel • Castings - Aluminum • Castings - Steel • Prototypes - Rapid Casting

FFL-7 / SOT Ferrous & non-ferrous air-melt alloys. Up to 30 lbs. short & long production runs for aerospace, military, and medical castings. Full NDT, chemical laboratory & in-house machining & tooling. We also quote rapid protos with our in-house wax proto printer. Surgical tools, Cobalt spherical ball bearings, rod ends, manifolds, and military & missile ordnance components.



Quality Certifications: NADCAP WELD & NDT • AS 9100C / ISO 9002 • GE AEROSPACE • LOCKHEED / BOEING APRV.
LAMAR TOOL & DIE CASTING INC.     Booth # 438
Service Categories: Castings - Die, Aluminum • Diecasting Design • Machining - Castings • Tools, Dies & Fixtures • Tooling - Casting

Our die casting department features fully automated die casting machines from 350 to 1000 tons of clamping pressure. We cast with both standard and exotic alloys. We also have CNC Machining and Powder Coating in-house while offering off shore tooling. Let our 40 years of experience and customer service work for you. We now have a second location in Stockton CA!

Quality Certifications: ISO 9001, AS 9100
LEE SPRING     Booth # 241
Service Categories: Springs - Coil • Springs - Flat • Springs - Wave • Stampings - Fourslide

Springs in stock ready to ship or made to your specifications. Large selection of stock Compression, Extension, Torsion, HEFTY™ Die, REDUX™ Wave, LeeP™ Plastic Composite, MIL-SPEC, Belleville Washer, Battery and Constant Force Springs. Custom Springs, Stampings, Wire Forms and Fourslide design and manufacturing. Prototypes through large production runs.



Quality Certifications: ISO 9001 • RoHS / REACH • MIL SPEC AS24585 • MIL SPEC AS24586
MERCED SCREW PRODUCTS     Booth # 332
Service Categories: Screw Machining • Screw Machining - Multi Spindle • Machining - CNC Milling & Turning • Grinding - Centerless • Quality Control

Established in Merced in 1967. Currently, we have 49 employees, 40 B&S Screw Machines, 19 CNC Machines, 9 Multi Spindle Wickmans, 9 Hardinge Lathes, 2 Centerless Grinders, and many more supporting machines. Merced Screw Products is large enough to handle all your needs and small enough to ensure you are given the attention necessary for success.

MERCURY CORP.     Booth # 224
Service Categories: Fabricating - Sheet Metal • Metal Cabinets & Enclosures • Assemblies - Turnkey • Fabricating - Aluminum • Fabricating - Stainless Steel

AN INTEGRATED SOLUTION TO YOUR SUPPLY CHAIN - we build custom racks, frames, enclosures, plastics & stamping assemblies. CORE PROCESSES: Design, Metal Fabrication, welding of all types of metals, Plastic Injection Molding, Finishing, Turn-Key Assemblies & KAN BAN.



Quality Certifications: ISO 9001:2008 • ISO 13485 • AS 9100 • ITAR REGISTERED
METALFX/ADVANCED MFG. & DEV.     Booth # 101
Service Categories: Fabricating - Sheet Metal • Machining - CNC Milling & Turning • Assemblies - Electromechanical • Metal Cabinets & Enclosures • Screen Printing

Manufacturer of sheet metal and machined parts. We supply piece part to fully integrated electromechanical assemblies. We supply to leading companies in Electronic, Medical, Transportation, Networking, Aerospace, Test & Measurement to name a few. Our capabilities include, laser cutting, forming, welding, paint, powder coat, silk screen, CNC machining, and wood products.

Quality Certifications: ISO 9001:2000
MINDRUM PRECISION INC.     Booth # 232
Service Categories: Machining - Precision CNC • Optical Components • Ceramic Parts • EDM - Wire • Machining - Ceramics

Precision custom machining & polishing components & assemblies. 5-axis CNC milling, turning surface grinding, plano, spherical & cylindrical polishing glassblowing, acid etching, soldering & wire EDM. Materials: glass, quartz, sapphire, ceramics & similar. Aluminum, stainless steel, titanium & similar. 1,000 clean room 100 under hood.

Quality Certifications: ISO 9001:2015 • MIL-I-45208A
MS. CARITA INC.     Booth # 437
Service Categories: Labels, Tapes & Decals • Pad Printing • Nameplates, Dials & Panels • Prototypes - Plastic • Packaging

We have been supporting customers with their labeling and panel overlay needs for over 40 years. We are very active in many business segments such as Medical Device, Biotech, Network / Telecommunications, Avionics and many others. Assisting Design & Manufacturing facilities looking for help with Labels, Nameplates, & Die-Cut items as well as Marketing Graphics.

OPTINOVA AMERICAS INC.     Booth # 430
Service Categories: Extrusions - Plastic • Plastics - Sheet, Rod & Tube • Materials - Plastic • Plastics - Extruded Profiles • Plastics - Thermoplastic Extrusion

We are a leading global supplier of advanced tubing solutions for the medical device and industrial markets. Fluoropolymer and thermoplastic polymer extrusions include anti-static, spiral cut, striped, and fabricated tubes, as well as IV catheter tubing, braided shafts, heat shrink tubing, etched OD PTFE liners, multi-lumen tubing, balloon & stent protectors.

Quality Certifications: ISO 9001 & ISO 13485 • ISO 14001 • RoHS / REACH • NSF51
OREGON WIRE     Booth # 441
Service Categories: Wire Forming & Fabricating • Wire Straightening • Wire Rope Assemblies

We are a top manufacturer of custom wire forms, serving a wide range of customers in agriculture, construction, and retail.

PANNAM IMAGING     Booth # 343
Service Categories: Assemblies - Printed Circuit Boards • Panels - Control • Nameplates, Dials & Panels • Labels, Tapes & Decals • Assemblies - Electrical

We have over 50 years of experience in manufacturing a wide range of membrane switch & keypad solutions. With our sister division Metalphoto of Cincinnati, we also offer rigid back panels, control & front panels, along with rugged identification labels & nameplates for a complete user-interface solution for your application.

Quality Certifications: ISO 9001:2015 CERTIFIED
PEKO PRECISION PRODUCTS INC.     Booth # 218
Service Categories: Assemblies - Turnkey • Machining - CNC Milling & Turning • Fabricating - Sheet Metal • Systems Integration • Special Machinery - Design, Build & Rebuild

A Vertically Integrated Contract Manufacturer with four major divisions: CNC Machining: 85 turning & milling CNC machines; the largest is 106" x 161" x 42", Sheet Metal/Stamping with state-of-the-art equipment including robotic welding. Assembly Division: Assembly & test of top level OEM product/equipment. Systems Division: Design & build automated test & assembly equipment.



Quality Certifications: ISO 9001:2015 • ISO 13485 • AS 9100 • TUV / UL CERTIFIED
PENTZ CAST SOLUTIONS     Booth # 417
Service Categories: Castings - Aluminum • Castings - Sand • Machining - Multi Axis • Machining - Aluminum • CAD Design Services

We are a full service aluminum foundry that specializes in premier precision sand castings for all industries. For over 40 years, Pentz's as-cast surface finish and integrity of aluminum is regarded as some of the best in the industry. Pentz's facility includes in-house engineering and CNC machining and can support tooling, prototype, and production work.

PETERSEN PRECISION ENGINEERING LLC     Booth # 115
Service Categories: Stampings - Fineblanked • Grinding - Creep Feed • Machining - Precision CNC • Grinding - I.D. & O.D. • Grinding - Double Disc

Complete precision metal part manufacturing service, offering fineblanking, CNC milling & turning, lapping, EDM, honing and grinding. Grinding includes double disc, blanchard, surface, cylindrical, centerless and creepfeed.



Quality Certifications: MIL-45208 • MIL-STD-105-E
PHOTOFABRICATION ENGINEERING INC (PEI)     Booth # 219
Service Categories: Photochemical Etching & Machining • Chemical Milling • Machining - Exotic Materials • Shielding - EMI/RFI • Machining - Stainless Steel

Manufacturer of photochemically-machined (chemically milled) precision metal parts. Most metals, including stainless steel, copper, aluminum, brass, titanium, Kovar, etc., in thicknesses from .0003" - .125" thick. Markets served include medical, aerospace, electronics, microwave, printed circuit & all industries requiring burr-free, stress-free metal parts.



Quality Certifications: ISO 9001 • AS 9100 • ITAR • ANAB
PLASMA RUGGEDIZED SOLUTIONS     Booth # 228
Service Categories: Coatings - Conformal • Coatings - Physical Vapor Deposition • Potting & Encapsulation • Electronic Encapsulations • Engineering & Technical Services

The premier service provider for Conformal Coating, Potting, Encapsulating, Plasma Etchback/Desmear, Laboratory Services & BGA underfill, ESS testing, and ultrasonic cleaning. Our Northern and Southern California divisions provide rapid response, technical excellence and a problem-solving, “can-do” staff of professionals. From concept to integration, we are your solutions resource. RoHS Compliant.

Quality Certifications: AS 9100 • ISO 9001-2000 • ITAR • IPC
PREMOLD CORP.     Booth # 421
Service Categories: Plastics - Reaction Injection Molding • Plastics - Low Volume • Plastics - Injection Molding • Pad Printing • Assemblies - Mechanical

A leading supplier of custom reaction-injection-molded (RIM) plastic housings, bezels, and enclosures for specialty equipment for the life sciences industries. Premold Corp. is vertically integrated, offering mold design and build, molding, painting, finishing, EMI, decorating, prototyping, subassembly, project management, and sourcing services.

Quality Certifications: UL • ISO 9001:2015
PREPRODUCTION PLASTICS INC.     Booth # 128
Service Categories: Plastics - Structural Foam • Plastics - Injection Molding • Plastics - Painting • Assemblies - Turnkey • Tooling - Plastic Injection Molding

Full service, turnkey custom structural foam injection molder with in-house mold design, moldmaking, molding, finishing and assembly all under one roof.



Quality Certifications: ISO 9001:2015 • UL CERTIFIED
PROTOCAFE INC.     Booth # 225
Service Categories: Rapid Prototyping • Molds & Moldmaking - Plastic • Silicone / Rubber - Liquid Injection Molding • 3D Printing • Plastics - Low Volume

Full turnkey service bureau offering urethane casting/soft tooling, silicone parts, model finishing painting laser cutting, 3D scanning, low volume production. We also have the finest resolution prototyping in the industry. Great for fine feature detail. DMLS, FDM, ABS, SLA, SLS, DMLS, translucent, flexible, high resolution, high temp, medical grade, Largest platform.

RAISE3D     Booth # 206
Service Categories: 3D Printing • Materials - Plastic

With innovative 3D printing technology, we empower our customers to build extraordinary things. RAISE3D award winning 3D printers are known for their rigorous quality standards and built specifically for the needs of our customers to be more competitive, incorporate advanced materials and large build volumes to produce customized manufacturing on demand.

REDCO     Booth # 126
Service Categories: Rubber Molding • Rubber To Metal Bonding • Rubber Rolls & Rollers • Die-Cutting • Gaskets, Seals, Washers & O-rings

Proudly made in America since 1948. Your complete source for precision rollers, rubber molding, rubber extrusions, die-cutting, foam fabricating & sub component assembly. We are your one stop source. Family owned and operated for 70 years.



ROBERTS AUTOMATIC PRODUCTS INC.     Booth # 120
Service Categories: Screw Machining - Multi Spindle • Machining - CNC Milling & Turning • Machining - Precision CNC • Machining - Multi Axis • Screw Machining - Swiss/CNC Swiss

Offering precision production machining, featuring twin-spindle multi-tasking CNC turnmill centers and multi axis CNC cells, swiss, & multiple spindle screw machines.



Quality Certifications: ISO 9001:2008 • ITAR REGISTERED
S&H RUBBER     Booth # 335
Service Categories: Rubber Molding • Extrusions - Rubber • Rubber Stampings • Rubber To Metal Bonding

Contract Manufacturer for rubber parts. Molded, Extruded and Stamped rubber parts. We serve aerospace, automotive and many other industries. We work with many types of rubber including; Silicone, EPDM, Neoprene, Buna-Nitrile and Viton. ISO 9001:2015 and AS9100 Rev. D as well as a direct supplier to Boeing, Parker and other OEM Aerospace Companies.

Quality Certifications: ISO 9001:2015 • AS 9100 REV D • BOEING • ITAR
SAF - SOUTHERN ALUMINUM FINISHING     Booth # 432
Service Categories: Metal Finishing - Anodizing • Clad Metals • Extrusions - Aluminum • Fabricating - Aluminum • Fabricating - Sheet Metal

A metals distributor with stocked inventories of anodize quality aluminum sheet and aluminum extrusions as well as a metal fabricator. SAF is an anodizer, and aluminum painter with aluminum coil anodizing as well. SAF focuses on value-added vertical integration as a distributor/fabricator/finisher with attention paid to speed and quality materials and service.

Quality Certifications: AAMA • AAMA 2605 • MIL-A-8625 Type II • 5S
SCANDIC SPRINGS INC.     Booth # 336
Service Categories: Stampings - Progressive Die • Fabricating - Sheet Metal • Stampings - Fourslide • Springs - Coil • Laser Cutting

A leading stamping & spring company specializing in quick-turn prototypes, custom metal stamping & CNC wireforming & laser and waterjet cutting.

Quality Certifications: ISO 9001:2015
SCHIPPERS & CREW INC.     Booth # 334
Service Categories: Assemblies - Printed Circuit Boards • Surface Mount Technology - Assembly • Assemblies - Turnkey • Cable & Wire Manufacturing • Inspection Services

We are an Electronics Manufacturing Services Company in Seattle, WA. We provide a full range of assembly services including SMT, Thru-hole, Box Build, BGA, Cable, Test (ICT & JTAG) & X-Ray. Lead-free & Leaded. Our facility handles quantities from prototype up to volume production in both consigned & turnkey formats. Please contact us for a quote or tour!

Quality Certifications: ISO 9001 • ITAR • IPC-A-610
SKS DIE CASTING & MACHINING INC.     Booth # 253
Service Categories: Castings - Die, Aluminum • Machining - Precision CNC • Tools, Dies & Fixtures • Castings - Die, Zinc

Aluminum, zinc & brass die casting & finishing company, supplying precision-machined components. We have a complete in-house CAD/CAM die design capabilities.

Quality Certifications: ISO 9002
SMART PRODUCTS USA     Booth # 102
Service Categories: Valves & Controls • Pumps & Reservoirs

Designs & manufactures an extensive family of check valves, pressure relief valves, pumps, & related components for advanced low pressure, low flow applications.



Quality Certifications: ISO 9001:2015
SPECCOAT     Booth # 242
Service Categories: Coatings - Conformal • Coatings - Physical Vapor Deposition • Coatings - Polyurethane • Potting & Encapsulation • Electronic Encapsulations

Provides conformal coating and potting of printed circuit boards. Urethane, Acrylics, Silicone, Parylene, Epoxies and Nano coating. Industries include: Military, Medical, Aerospace, Space, and Industrial. Minor sub-assembly and soldering.

Quality Certifications: ISO 9001:2008 • AS 9100 REV D • ITAR • ANSI ESD S20.20-2007
SURFACE FINISHES     Booth # 105
Service Categories: Optical Polishing • Lapping • Machining - Single Point Diamond • Grinding - I.D. & O.D. • Metrology - Equipment & Services

Precision Finishing, Fabrication and Refurbishment Services, Chemical Mechanical Polishing, Optical Quality Polishing, Precision Lapping, Single Point Diamond Machining, and Precision Low Stress Grinding. See our website for typical results.



Quality Certifications: ITAR REGISTERED
SVTRONICS INC.     Booth # 121
Service Categories: Assemblies - Electronic • Electronics - New Product Development • Assemblies - Printed Circuit Boards • Prototypes - Electronic • Assemblies - Electromechanical

Our Product Design & Mfg. Services provide expert design and engineering covering electrical engineering, PCB layout, design verification & validation, compliance testing and Industrial design. Our state-of-the-art manufacturing facility also provides prototyping, mfg. services and works with the design team to ensure manufacturability of the product. Our Design Team has expertise in design for a variety of products including consumer electronics, medical devices, industrial and mobile computing products, communications interfaces, embedded controllers, automotive and industrial applications.

Quality Certifications: AS 9100 • ISO 13485 • ISO 14001 • ITAR
TEMPCO MFG. CO. INC.     Booth # 235
Service Categories: Stampings - Metal • Fabricating - Sheet Metal • Assemblies - Mechanical • Welding & Weldments • Tools, Dies & Fixtures

With over 70 years of experience, Tempco Manufacturing produces precision metal stampings, precision sheet metal fabrications, and mechanical assemblies for clients across numerous industries. Tempco Manufacturing offers a complete tool & die room to go along with secondary services to be your one stop shop for metal stampings and sheet metal fabrications.



Quality Certifications: AS9100D • ISO 13485:2016 • ISO 9001:2015
THERMO COOL     Booth # 319
Service Categories: Heat Sinks • Extrusions - Aluminum • Castings - Die, Aluminum • Stampings - Progressive Die • Forgings - Cold

We manufacture custom heat sinks. Aluminum extrusions, copper heat pipes, skived fins, snapped fins, bonded fins, cold forging and die casting. Secondary processes, including CNC machining, anodizing, bead blasting, interface materials, and screw/spring attachment hardware. Prototypes to full production Thermal engineering services: Design & CFD simulations.

Quality Certifications: ISO 9001:2008
TIERTIME CORP.     Booth # 416
Service Categories: 3D Printing • Prototypes - Plastic

Through consistent technological advancement, Tiertime strives to deliver AM solutions to a wide variety of fields such as engineering, industrial design, low-volume manufacturing, and education. Dedicated to reliability and constant improvement of the end-user experience for more than 20 years, the original vision remains – quality and affordable 3D printing for everyone.

Quality Certifications: CE, RoHS
TPI-ARCADE INC.     Booth # 243
Service Categories: Castings - Aluminum • Castings - Sand & Shell • Castings - Sand

The most advanced Aluminum V-Process casting facility in the US. Twice as accurate and smooth as common sand castings, .125" wall thickness, 0° draft and unlimited pattern life are a few advantages. We pride ourselves on speed to market with samples in 2-3 weeks. Let us be your prototype and production foundry.

Quality Certifications: AS9100D • ITAR REGISTERED
TRUE CUT E.D.M. INC.     Booth # 353
Service Categories: Machining - CNC Milling & Turning • EDM • Tools, Dies & Fixtures • Machining - Production • Stampings - Metal

Precision CNC Machining, Milling and Turning and EDM facility. Specializing in short run and prototype parts, Tool & Die work and fixtures. Also, short thru medium volume production runs. Punch press capabilities to 400 ton press. Serving Aerospace, Defense, Medical, Oil and Gas along with commercial industries.

Quality Certifications: AS 9100 REV D
UNIVERSAL ROBOTS USA INC.     Booth # 308
Service Categories: Robotics

We have reinvented industrial robotics with flexible, collaborative robot arms. Innovative force-sensing technology makes the robot stop operating when encountering an employee, eliminating the need for safety guarding in most scenarios. Unlike traditional industrial robots hardwired in a cage, the lightweight robots can be moved, automating high mix low volume.

Quality Certifications: ISO 9001:2015 CERTIFIED
VAGA INDUSTRIES     Booth # 230
Service Categories: Photochemical Etching & Machining • Chemical Milling • Fabricating - Stainless Steel • Prototypes - Fabrication • Springs - Flat

We specialize in precision Photo Chemical Machining parts of all types of metals, prototype & production. Thicknesses range from .0002" to .065". In-house CAD. Forming, heat treating & plating. AS9100D and ISO 9001 registered. Contact us at sales@vaga.com.

Quality Certifications: AS 9100D • ISO 9001 • MIL-I-45208
VALENCE SURFACE TECHNOLOGIES     Booth # 215
Service Categories: Metal Finishing - Precious Metal Plating • Metal Finishing - Electroless Nickel • Metal Finishing - Anodizing • Metal Finishing - Selective Plating • Metal Finishing - Painting

Coastline Metal Finishing a division of Valence Surface Technologies offers a wide variety of Metal Finishing Services to the RF Microwave, Satellite, Electronics, Rocket Launch and Aerospace Industries. With 20 different processes that include Anodizing, Chemical Film, Plating, Cleaning, Paint, and Masking. We also have many OEM Aerospace approvals.

Quality Certifications: ISO 9001:2015 • AS 9100 • NADCAP AC7108 REV I • ITAR REGISTERED
WEST VALLEY PRECISION INC.     Booth # 231
Service Categories: Machining - CNC Milling & Turning • Machining - Production • Prototypes - Machining • Machining - Precision CNC

We solve complex machining challenges for the world's leading medical, aerospace, and optics companies. Specializing in large travel horizontal and tight tolerance 5-axis milling. ISO 13485:2016 in process – to be completed 2/2020.

Quality Certifications: ISO 9001:2015 • AS 9100
WESTCAM SOLUTIONS INC.     Booth # 429
Service Categories: Software For Job Shops & Manufacturers

Supplies quality CAM software CAM/DNC, training, and support to companies throughout Northwest USA and Western Canada. Our experienced staff is dedicated to helping our clients with all aspects of their CAM/DNC needs. This includes installation and training as well as continued maintenance service and technical support.

WESTERN GRINDING SERVICE     Booth # 419
Service Categories: Grinding • Grinding - I.D. & O.D. • Grinding - Centerless • Screw Machining - Swiss/CNC Swiss • Machining - Miniature Precision

ISO 9001:2015 Certified located in Santa Clara, CA. Offering super precision, tight tolerance parts and assemblies for Medical, Aerospace, Defense, Communications and Technology industries. CNC ID/OD, centerless, surface, cylindrical grinding, multi-axis Swiss, Turning and Milling. Diverse equipment and experience for one source manufacturing solutions. Yes +/-.0001".

Quality Certifications: ISO 9001:2015 CERTIFIED • ITAR CERTIFIED • RoHS / ITAR • NORTHROP GRUMMAN
WESTERN SINTERING CO. INC.     Booth # 342
Service Categories: Powder Metal Parts • Gears • Fabricating - Stainless Steel • Fabricating - Steel

Specializing in high precision, engineered part solutions from powder metal with a focus on quality and customer service.

Quality Certifications: ISO 9001:2015
WILLIAMS MANUFACTURING     Booth # 314
Service Categories: Welding & Weldments • Machining - Precision CNC • Engineering & Technical Services • Fabricating - Stainless Steel • Fabricating - Sheet Metal

A full service Metal Fabrication facility with the ability to produce tight tolerances, quality products and on time deliveries unsurpassed in the industry. With over 40 years of experience, we are confident that our customers will have a professional business experience. We look forward to serving all industries for any size project. ISO Compliant

WRIGHT ENGINEERED PLASTICS INC.     Booth # 324
Service Categories: Plastics - Injection Molding • Plastics - Insert Injection Molding • Plastics - Elastomeric Overmolding • Plastics - In Mold Labeling & Decorating • Assemblies - Turnkey

San Francisco Bay Area provider of injection molding & assembly services, including clean environment rooms for molding & assembly, insert or overmolding, decorating and final packaging. First Green Certified manufacturer in Northern California. In-house tool. Outstanding DFM support. All parts made in Santa Rosa, CA.

Quality Certifications: ISO 13485:2012 • ITAR REGISTERED
Y. C. CABLE USA INC.     Booth # 207
Service Categories: Wire & Cable Harnesses • Plastics - Insert Injection Molding • Cable & Wire Manufacturing • Assemblies - Electronic

An industry leader in cable assembly, wire harness and contract manufacturing. We have domestic and worldwide manufacturing facilities with diverse manufacturing capabilities to support OEM customers. Our products can be found in industrial, life sciences, scientific, automotive, EV, computer hardware, telecommunications, consumer, medical and RF markets.

Quality Certifications: ISO 9001:2000 • IPC/WHMA-A-620 • UL CERTIFIED • RoHS
ZEISS INDUSTRIAL METROLOGY     Booth # 125
Service Categories: Measurement & Inspection • Measurement - Equipment • Measurement - Software

We are the world's leader in CNC coordinate measuring machines (CMMs) & complete solutions for multidimensional metrology in the metrology lab & production.



©


© 2019 The Job Shop Company • 16 Waterbury Road, Prospect, CT 06712 • (800) 225-4535